Merge kroah.com:/home/greg/linux/BK/bleed-2.5

into kroah.com:/home/greg/linux/BK/i2c-2.5

drivers/i2c/Kconfig

@@ -193,6 +193,10 @@ config I2C_IBM_OCP_ADAP
 	tristate "IBM on-chip I2C Adapter"
 	depends on I2C_IBM_OCP_ALGO
 
+config I2C_IOP3XX
+	tristate "Intel XScale IOP3xx on-chip I2C interface"
+	depends on ARCH_IOP3XX && I2C
+
 config I2C_CHARDEV
 	tristate "I2C device interface"
 	depends on I2C

drivers/i2c/Makefile

@@ -16,4 +16,5 @@ obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_I2C_SENSOR)	+= i2c-sensor.o
+obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-y				+= busses/ chips/

drivers/i2c/chips/Kconfig

@@ -47,6 +47,21 @@ config SENSORS_LM75
 	  in the lm_sensors package, which you can download at 
 	  http://www.lm-sensors.nu
 	  
+config SENSORS_LM85
+	tristate "  National Semiconductors LM85 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for National Semiconductor LM85
+	  sensor chips and clones: ADT7463 and ADM1027.
+	  This can also be built as a module which can be inserted and
+	  removed while the kernel is running.
+
+	  The module will be called lm85.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at 
+	  http://www.lm-sensors.nu
+	  
 config SENSORS_VIA686A
 	tristate "  VIA686A"
 	depends on I2C && EXPERIMENTAL
@@ -76,8 +91,8 @@ config SENSORS_W83781D
 
 config I2C_SENSOR
 	tristate
-	default y if SENSORS_ADM1021=y || SENSORS_IT87=y || SENSORS_LM75=y || SENSORS_VIA686A=y || SENSORS_W83781D=y
-	default m if SENSORS_ADM1021=m || SENSORS_IT87=m || SENSORS_LM75=m || SENSORS_VIA686A=m || SENSORS_W83781D=m
+	default y if SENSORS_ADM1021=y || SENSORS_IT87=y || SENSORS_LM75=y || SENSORS_VIA686A=y || SENSORS_W83781D=y || SENSORS_LM85=y
+	default m if SENSORS_ADM1021=m || SENSORS_IT87=m || SENSORS_LM75=m || SENSORS_VIA686A=m || SENSORS_W83781D=m || SENSORS_LM85=m
 	default n
 
 endmenu

drivers/i2c/chips/Makefile

@@ -5,5 +5,6 @@
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
+obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o

drivers/i2c/chips/lm85.c

+/*
+    lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
+
+    Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+/*
+#include <asm/io.h>
+*/
+
+#undef	LM85EXTENDEDFUNC	/* Extended functionality */
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_4(lm85b, lm85c, adm1027, adt7463);
+
+/* Enable debug if true */
+static int	lm85debug = 0;
+
+/* The LM85 registers */
+
+#define	LM85_REG_IN(nr)			(0x20 + (nr))
+#define	LM85_REG_IN_MIN(nr)		(0x44 + (nr) * 2)
+#define	LM85_REG_IN_MAX(nr)		(0x45 + (nr) * 2)
+
+#define	LM85_REG_TEMP(nr)		(0x25 + (nr))
+#define	LM85_REG_TEMP_MIN(nr)		(0x4e + (nr) * 2)
+#define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
+
+/* Fan speeds are LSB, MSB (2 bytes) */
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+
+#define	LM85_REG_PWM(nr)		(0x30 + (nr))
+
+#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
+
+#define	ADT7463_REG_TMIN_CTL1		0x36
+#define	ADT7463_REG_TMIN_CTL2		0x37
+
+#define	LM85_REG_DEVICE			0x3d
+#define	LM85_REG_COMPANY		0x3e
+#define	LM85_REG_VERSTEP		0x3f
+/* These are the recognized values for the above regs */
+#define	LM85_DEVICE_ADX			0x27
+#define	LM85_COMPANY_NATIONAL		0x01
+#define	LM85_COMPANY_ANALOG_DEV		0x41
+#define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_LM85C		0x60
+#define	LM85_VERSTEP_LM85B		0x62
+#define	LM85_VERSTEP_ADM1027		0x60
+#define	LM85_VERSTEP_ADT7463		0x62
+
+#define	LM85_REG_CONFIG			0x40
+
+#define	LM85_REG_ALARM1			0x41
+#define	LM85_REG_ALARM2			0x42
+
+#define	LM85_REG_VID			0x43
+
+/* Automated FAN control */
+#define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
+#define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
+#define	LM85_REG_AFAN_SPIKE1		0x62
+#define	LM85_REG_AFAN_SPIKE2		0x63
+#define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
+#define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
+#define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
+#define	LM85_REG_AFAN_HYST1		0x6d
+#define	LM85_REG_AFAN_HYST2		0x6e
+
+#define	LM85_REG_TACH_MODE		0x74
+#define	LM85_REG_SPINUP_CTL		0x75
+
+#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
+#define	ADM1027_REG_CONFIG2		0x73
+#define	ADM1027_REG_INTMASK1		0x74
+#define	ADM1027_REG_INTMASK2		0x75
+#define	ADM1027_REG_EXTEND_ADC1		0x76
+#define	ADM1027_REG_EXTEND_ADC2		0x77
+#define	ADM1027_REG_CONFIG3		0x78
+#define	ADM1027_REG_FAN_PPR		0x7b
+
+#define	ADT7463_REG_THERM		0x79
+#define	ADT7463_REG_THERM_LIMIT		0x7A
+
+#define	LM85_ALARM_IN0			0x0001
+#define	LM85_ALARM_IN1			0x0002
+#define	LM85_ALARM_IN2			0x0004
+#define	LM85_ALARM_IN3			0x0008
+#define	LM85_ALARM_TEMP1		0x0010
+#define	LM85_ALARM_TEMP2		0x0020
+#define	LM85_ALARM_TEMP3		0x0040
+#define	LM85_ALARM_ALARM2		0x0080
+#define	LM85_ALARM_IN4			0x0100
+#define	LM85_ALARM_RESERVED		0x0200
+#define	LM85_ALARM_FAN1			0x0400
+#define	LM85_ALARM_FAN2			0x0800
+#define	LM85_ALARM_FAN3			0x1000
+#define	LM85_ALARM_FAN4			0x2000
+#define	LM85_ALARM_TEMP1_FAULT		0x4000
+#define	LM85_ALARM_TEMP3_FAULT		0x8000
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled 1.000 == 0xc0, mag = 3 */
+#define IN_TO_REG(val)		(SENSORS_LIMIT((((val)*0xc0+500)/1000),0,255))
+#define INEXT_FROM_REG(val,ext) (((val)*1000 + (ext)*250 + 96)/0xc0)
+#define IN_FROM_REG(val)	(INEXT_FROM_REG(val,0))
+
+/* IN are scaled acording to built-in resistors */
+static int lm85_scaling[] = {  /* .001 Volts */
+		2500, 2250, 3300, 5000, 12000
+	};
+#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+#define INS_TO_REG(n,val)		(SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255))
+#define INSEXT_FROM_REG(n,val,ext)	(SCALE((val)*4 + (ext),192*4,lm85_scaling[n]))
+/*
+#define INS_FROM_REG(n,val)		(INSEXT_FROM_REG(n,val,0))
+*/
+#define INS_FROM_REG(n,val)		( ( (val*4*lm85_scaling[n]) + (192*4/2) ) / (192*4) )
+
+/* FAN speed is measured using 90kHz clock */
+#define FAN_TO_REG(val)		(SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
+#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+
+/* Temperature is reported in .01 degC increments */
+#define TEMP_TO_REG(val)		(SENSORS_LIMIT(((val)+50)/100,-127,127))
+#define TEMPEXT_FROM_REG(val,ext)	((val)*100 + (ext)*25)
+#define TEMP_FROM_REG(val)		(TEMPEXT_FROM_REG(val,0))
+#define EXTTEMP_TO_REG(val)		(SENSORS_LIMIT((val)/25,-127,127))
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val)		(val)
+
+#define EXT_FROM_REG(val,sensor)	(((val)>>(sensor * 2))&0x03)
+
+#ifdef	LM85EXTENDEDFUNC	/* Extended functionality */
+
+/* ZONEs have the following parameters:
+ *    Limit (low) temp,           1. degC
+ *    Hysteresis (below limit),   1. degC (0-15)
+ *    Range of speed control,     .1 degC (2-80)
+ *    Critical (high) temp,       1. degC
+ *
+ * FAN PWMs have the following parameters:
+ *    Reference Zone,                 1, 2, 3, etc.
+ *    Spinup time,                    .05 sec
+ *    PWM value at limit/low temp,    1 count
+ *    PWM Frequency,                  1. Hz
+ *    PWM is Min or OFF below limit,  flag
+ *    Invert PWM output,              flag
+ *
+ * Some chips filter the temp, others the fan.
+ *    Filter constant (or disabled)   .1 seconds
+ */
+
+/* These are the zone temperature range encodings */
+static int lm85_range_map[] = {   /* .1 degC */
+		 20,  25,  33,  40,  50,  66,
+		 80, 100, 133, 160, 200, 266,
+		320, 400, 533, 800
+	};
+static int RANGE_TO_REG( int range )
+{
+	int i;
+
+	if( range >= lm85_range_map[15] ) { return 15 ; }
+	for( i = 0 ; i < 15 ; ++i )
+		if( range <= lm85_range_map[i] )
+			break ;
+	return( i & 0x0f );
+}
+#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+
+/* These are the Acoustic Enhancement, or Temperature smoothing encodings
+ * NOTE: The enable/disable bit is INCLUDED in these encodings as the
+ *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
+ *       is ignored, or set to 0.
+ */
+static int lm85_smooth_map[] = {  /* .1 sec */
+		350, 176, 118,  70,  44,   30,   16,    8
+/*    35.4 *    1/1, 1/2, 1/3, 1/5, 1/8, 1/12, 1/24, 1/48  */
+	};
+static int SMOOTH_TO_REG( int smooth )
+{
+	int i;
+
+	if( smooth <= 0 ) { return 0 ; }  /* Disabled */
+	for( i = 0 ; i < 7 ; ++i )
+		if( smooth >= lm85_smooth_map[i] )
+			break ;
+	return( (i & 0x07) | 0x08 );
+}
+#define SMOOTH_FROM_REG(val) ((val)&0x08?lm85_smooth_map[(val)&0x07]:0)
+
+/* These are the fan spinup delay time encodings */
+static int lm85_spinup_map[] = {  /* .1 sec */
+		0, 1, 2, 4, 7, 10, 20, 40
+	};
+static int SPINUP_TO_REG( int spinup )
+{
+	int i;
+
+	if( spinup >= lm85_spinup_map[7] ) { return 7 ; }
+	for( i = 0 ; i < 7 ; ++i )
+		if( spinup <= lm85_spinup_map[i] )
+			break ;
+	return( i & 0x07 );
+}
+#define SPINUP_FROM_REG(val) (lm85_spinup_map[(val)&0x07])
+
+/* These are the PWM frequency encodings */
+static int lm85_freq_map[] = { /* .1 Hz */
+		100, 150, 230, 300, 380, 470, 620, 980
+	};
+static int FREQ_TO_REG( int freq )
+{
+	int i;
+
+	if( freq >= lm85_freq_map[7] ) { return 7 ; }
+	for( i = 0 ; i < 7 ; ++i )
+		if( freq <= lm85_freq_map[i] )
+			break ;
+	return( i & 0x07 );
+}
+#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+
+/* Since we can't use strings, I'm abusing these numbers
+ *   to stand in for the following meanings:
+ *      1 -- PWM responds to Zone 1
+ *      2 -- PWM responds to Zone 2
+ *      3 -- PWM responds to Zone 3
+ *     23 -- PWM responds to the higher temp of Zone 2 or 3
+ *    123 -- PWM responds to highest of Zone 1, 2, or 3
+ *      0 -- PWM is always at 0% (ie, off)
+ *     -1 -- PWM is always at 100%
+ *     -2 -- PWM responds to manual control
+ */
+
+#endif		/* Extended functionality */
+
+static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+
+#ifdef	LM85EXTENDEDFUNC	/* Extended functionality */
+
+static int ZONE_TO_REG( int zone )
+{
+	int i;
+
+	for( i = 0 ; i <= 7 ; ++i )
+		if( zone == lm85_zone_map[i] )
+			break ;
+	if( i > 7 )   /* Not found. */
+		i = 3;  /* Always 100% */
+	return( (i & 0x07)<<5 );
+}
+
+#endif		/* Extended functionality */
+
+#define HYST_TO_REG(val) (SENSORS_LIMIT((-(val)+5)/10,0,15))
+#define HYST_FROM_REG(val) (-(val)*10)
+
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
+#define OFFSET_FROM_REG(val) ((val)*25)
+
+#define PPR_MASK(fan) (0x03<<(fan *2))
+#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
+#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+
+/* i2c-vid.h defines vid_from_reg() */
+#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
+
+#define ALARMS_FROM_REG(val) (val)
+
+/* Unlike some other drivers we DO NOT set initial limits.  Use
+ * the config file to set limits.  Some users have reported
+ * motherboards shutting down when we set limits in a previous
+ * version of the driver.
+ */
+
+/* Typically used with Pentium 4 systems v9.1 VRM spec */
+#define LM85_INIT_VRM  91
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    given the automatic PWM fan control that is possible.  There
+ *    are about 47 bytes of config data to only 22 bytes of actual
+ *    readings.  So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 1 *minute*
+ */
+#define LM85_DATA_INTERVAL  (HZ + HZ / 2)
+#define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
+
+/* For each registered LM85, we need to keep some data in memory. That
+   data is pointed to by lm85_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm85 client is
+   allocated. */
+
+/* LM85 can automatically adjust fan speeds based on temperature
+ * This structure encapsulates an entire Zone config.  There are
+ * three zones (one for each temperature input) on the lm85
+ */
+struct lm85_zone {
+	s8 limit;	/* Low temp limit */
+	u8 hyst;	/* Low limit hysteresis. (0-15) */
+	u8 range;	/* Temp range, encoded */
+	s8 critical;	/* "All fans ON" temp limit */
+};
+
+struct lm85_autofan {
+	u8 config;	/* Register value */
+	u8 freq;	/* PWM frequency, encoded */
+	u8 min_pwm;	/* Minimum PWM value, encoded */
+	u8 min_off;	/* Min PWM or OFF below "limit", flag */
+};
+
+struct lm85_data {
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[5];		/* Register value */
+	u8 in_max[5];		/* Register value */
+	u8 in_min[5];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_offset[3];	/* Register value */
+	u16 fan[4];		/* Register value */
+	u16 fan_min[4];		/* Register value */
+	u8 pwm[3];		/* Register value */
+	u8 spinup_ctl;		/* Register encoding, combined */
+	u8 tach_mode;		/* Register encoding, combined */
+	u16 extend_adc;		/* Register value */
+	u8 fan_ppr;		/* Register value */
+	u8 smooth[3];		/* Register encoding */
+	u8 vid;			/* Register value */
+	u8 vrm;			/* VRM version */
+	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
+	u8 oppoint[3];		/* Register value */
+	u16 tmin_ctl;		/* Register value */
+	u32 therm_total;	/* Cummulative therm count */
+	u8 therm_limit;		/* Register value */
+	u16 alarms;		/* Register encoding, combined */
+	struct lm85_autofan autofan[3];
+	struct lm85_zone zone[3];
+};
+
+static int lm85_attach_adapter(struct i2c_adapter *adapter);
+static int lm85_detect(struct i2c_adapter *adapter, int address,
+			int kind);
+static int lm85_detach_client(struct i2c_client *client);
+
+static int lm85_read_value(struct i2c_client *client, u8 register);
+static int lm85_write_value(struct i2c_client *client, u8 register, int value);
+static void lm85_update_client(struct i2c_client *client);
+static void lm85_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm85_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "lm85",
+	.id             = I2C_DRIVERID_LM85,
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = lm85_attach_adapter,
+	.detach_client  = lm85_detach_client,
+};
+
+/* Unique ID assigned to each LM85 detected */
+static int lm85_id = 0;
+
+
+/* 4 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->fan_min[nr] = FAN_TO_REG(val);
+	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_fan(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, 0x##offset - 1);		\
+}									\
+static DEVICE_ATTR(fan_input##offset, S_IRUGO, show_fan_##offset, NULL) \
+static DEVICE_ATTR(fan_min##offset, S_IRUGO | S_IWUSR, 			\
+		show_fan_##offset##_min, set_fan_##offset##_min)
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+show_fan_offset(4);
+
+/* vid, vrm, alarms */
+
+static ssize_t show_vid_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL)
+
+static ssize_t show_vrm_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg)
+
+static ssize_t show_alarms_reg(struct device *dev, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL)
+
+/* pwm */
+
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+}
+static ssize_t set_pwm(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->pwm[nr] = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
+	return count;
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int	pwm_zone;
+
+	lm85_update_client(client);
+	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
+	return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
+}
+
+#define show_pwm_reg(offset)						\
+static ssize_t show_pwm_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, 0x##offset - 1);		\
+}									\
+static ssize_t show_pwm_enable##offset (struct device *dev, char *buf)	\
+{									\
+	return show_pwm_enable(dev, buf, 0x##offset - 1);			\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, 			\
+		show_pwm_##offset, set_pwm_##offset)			\
+static DEVICE_ATTR(pwm_enable##offset, S_IRUGO, show_pwm_enable##offset, NULL)
+
+show_pwm_reg(1);
+show_pwm_reg(2);
+show_pwm_reg(3);
+
+/* Voltages */
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]) );
+}
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+}
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
+	return count;
+}
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
+	return count;
+}
+#define show_in_reg(offset)						\
+static ssize_t show_in_##offset (struct device *dev, char *buf)		\
+{									\
+	return show_in(dev, buf, 0x##offset);				\
+}									\
+static ssize_t show_in_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_in_min(dev, buf, 0x##offset);			\
+}									\
+static ssize_t show_in_##offset##_max (struct device *dev, char *buf)	\
+{									\
+	return show_in_max(dev, buf, 0x##offset);			\
+}									\
+static ssize_t set_in_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_min(dev, buf, count, 0x##offset);			\
+}									\
+static ssize_t set_in_##offset##_max (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_max(dev, buf, count, 0x##offset);			\
+}									\
+static DEVICE_ATTR(in_input##offset, S_IRUGO, show_in_##offset, NULL)	\
+static DEVICE_ATTR(in_min##offset, S_IRUGO | S_IWUSR, 			\
+		show_in_##offset##_min, set_in_##offset##_min)		\
+static DEVICE_ATTR(in_max##offset, S_IRUGO | S_IWUSR, 			\
+		show_in_##offset##_max, set_in_##offset##_max)
+
+show_in_reg(0);
+show_in_reg(1);
+show_in_reg(2);
+show_in_reg(3);
+show_in_reg(4);
+
+/* Temps */
+
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]) );
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	lm85_update_client(client);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	int val = simple_strtol(buf, NULL, 10);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
+	return count;
+}
+#define show_temp_reg(offset)						\
+static ssize_t show_temp_##offset (struct device *dev, char *buf)	\
+{									\
+	return show_temp(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t show_temp_##offset##_min (struct device *dev, char *buf)	\
+{									\
+	return show_temp_min(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t show_temp_##offset##_max (struct device *dev, char *buf)	\
+{									\
+	return show_temp_max(dev, buf, 0x##offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_min (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_min(dev, buf, count, 0x##offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_max (struct device *dev, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_max(dev, buf, count, 0x##offset - 1);		\
+}									\
+static DEVICE_ATTR(temp_input##offset, S_IRUGO, show_temp_##offset, NULL)	\
+static DEVICE_ATTR(temp_min##offset, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_min, set_temp_##offset##_min)	\
+static DEVICE_ATTR(temp_max##offset, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_max, set_temp_##offset##_max)
+
+show_temp_reg(1);
+show_temp_reg(2);
+show_temp_reg(3);
+
+
+int lm85_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_detect(adapter, &addr_data, lm85_detect);
+}
+
+int lm85_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep ;
+	struct i2c_client *new_client = NULL;
+	struct lm85_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (i2c_is_isa_adapter(adapter)) {
+		/* This chip has no ISA interface */
+		goto ERROR0 ;
+	};
+
+	if (!i2c_check_functionality(adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto ERROR0 ;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm85_{read,write}_value. */
+
+	if (!(new_client = kmalloc((sizeof(struct i2c_client)) +
+				    sizeof(struct lm85_data),
+				    GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+
+	memset(new_client, 0, sizeof(struct i2c_client) +
+			      sizeof(struct lm85_data));
+	data = (struct lm85_data *) (new_client + 1);
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm85_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = lm85_read_value(new_client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+
+	if (lm85debug) {
+		printk("lm85: Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+	}
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		if (lm85debug) {
+			printk("lm85: Autodetecting device at %d,0x%02x ...\n",
+			i2c_adapter_id(adapter), address );
+		}
+		if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C ) {
+			kind = lm85c ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B ) {
+			kind = lm85b ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
+			printk("lm85: Unrecgonized version/stepping 0x%02x"
+			    " Defaulting to LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027 ) {
+			kind = adm1027 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADT7463 ) {
+			kind = adt7463 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & 0xf0) == LM85_VERSTEP_GENERIC ) {
+			printk("lm85: Unrecgonized version/stepping 0x%02x"
+			    " Defaulting to ADM1027.\n", verstep );
+			kind = adm1027 ;
+		} else if( kind == 0 && (verstep & 0xf0) == 0x60) {
+			printk("lm85: Generic LM85 Version 6 detected\n");
+			/* Leave kind as "any_chip" */
+		} else {
+			if (lm85debug) {
+				printk("lm85: Autodetection failed\n");
+			}
+			/* Not an LM85 ... */
+			if( kind == 0 ) {  /* User used force=x,y */
+			    printk("lm85: Generic LM85 Version 6 not"
+				" found at %d,0x%02x. Try force_lm85c.\n",
+				i2c_adapter_id(adapter), address );
+			}
+			err = 0 ;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	if ( kind == any_chip ) {
+		type_name = "lm85";
+		strlcpy(new_client->dev.name, "Generic LM85", DEVICE_NAME_SIZE);
+	} else if ( kind == lm85b ) {
+		type_name = "lm85b";
+		strlcpy(new_client->dev.name, "National LM85-B", DEVICE_NAME_SIZE);
+	} else if ( kind == lm85c ) {
+		type_name = "lm85c";
+		strlcpy(new_client->dev.name, "National LM85-C", DEVICE_NAME_SIZE);
+	} else if ( kind == adm1027 ) {
+		type_name = "adm1027";
+		strlcpy(new_client->dev.name, "Analog Devices ADM1027", DEVICE_NAME_SIZE);
+	} else if ( kind == adt7463 ) {
+		type_name = "adt7463";
+		strlcpy(new_client->dev.name, "Analog Devices ADT7463", DEVICE_NAME_SIZE);
+	} else {
+		dev_dbg(&adapter->dev, "Internal error, invalid kind (%d)!", kind);
+		err = -EFAULT ;
+		goto ERROR1;
+	}
+
+	/* Fill in the remaining client fields */
+	new_client->id = lm85_id++;
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	if (lm85debug) {
+		printk("lm85: Assigning ID %d to %s at %d,0x%02x\n",
+		new_client->id, new_client->dev.name,
+		i2c_adapter_id(new_client->adapter),
+		new_client->addr);
+	}
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Set the VRM version */
+	data->vrm = LM85_INIT_VRM ;
+
+	device_create_file(&new_client->dev, &dev_attr_fan_input1);
+	device_create_file(&new_client->dev, &dev_attr_fan_input2);
+	device_create_file(&new_client->dev, &dev_attr_fan_input3);
+	device_create_file(&new_client->dev, &dev_attr_fan_input4);
+	device_create_file(&new_client->dev, &dev_attr_fan_min1);
+	device_create_file(&new_client->dev, &dev_attr_fan_min2);
+	device_create_file(&new_client->dev, &dev_attr_fan_min3);
+	device_create_file(&new_client->dev, &dev_attr_fan_min4);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm_enable1);
+	device_create_file(&new_client->dev, &dev_attr_pwm_enable2);
+	device_create_file(&new_client->dev, &dev_attr_pwm_enable3);
+	device_create_file(&new_client->dev, &dev_attr_in_input0);
+	device_create_file(&new_client->dev, &dev_attr_in_input1);
+	device_create_file(&new_client->dev, &dev_attr_in_input2);
+	device_create_file(&new_client->dev, &dev_attr_in_input3);
+	device_create_file(&new_client->dev, &dev_attr_in_input4);
+	device_create_file(&new_client->dev, &dev_attr_in_min0);
+	device_create_file(&new_client->dev, &dev_attr_in_min1);
+	device_create_file(&new_client->dev, &dev_attr_in_min2);
+	device_create_file(&new_client->dev, &dev_attr_in_min3);
+	device_create_file(&new_client->dev, &dev_attr_in_min4);
+	device_create_file(&new_client->dev, &dev_attr_in_max0);
+	device_create_file(&new_client->dev, &dev_attr_in_max1);
+	device_create_file(&new_client->dev, &dev_attr_in_max2);
+	device_create_file(&new_client->dev, &dev_attr_in_max3);
+	device_create_file(&new_client->dev, &dev_attr_in_max4);
+	device_create_file(&new_client->dev, &dev_attr_temp_input1);
+	device_create_file(&new_client->dev, &dev_attr_temp_input2);
+	device_create_file(&new_client->dev, &dev_attr_temp_input3);
+	device_create_file(&new_client->dev, &dev_attr_temp_min1);
+	device_create_file(&new_client->dev, &dev_attr_temp_min2);
+	device_create_file(&new_client->dev, &dev_attr_temp_min3);
+	device_create_file(&new_client->dev, &dev_attr_temp_max1);
+	device_create_file(&new_client->dev, &dev_attr_temp_max2);
+	device_create_file(&new_client->dev, &dev_attr_temp_max3);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_vid);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	/* Initialize the LM85 chip */
+	lm85_init_client(new_client);
+	return 0;
+
+	/* Error out and cleanup code */
+    ERROR1:
+	kfree(new_client);
+    ERROR0:
+	return err;
+}
+
+int lm85_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(client);
+	return 0;
+}
+
+
+int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	/* What size location is it? */
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Read WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	case LM85_REG_ALARM1 :	/* Read both bytes at once */
+	case ADM1027_REG_EXTEND_ADC1 :  /* Read two bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
+		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
+		break ;
+	default:	/* Read BYTE data */
+		res = i2c_smbus_read_byte_data(client, reg);
+		break ;
+	}
+
+	return res ;
+}
+
+int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res ;
+
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Write WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	/* NOTE: ALARM is read only, so not included here */
+		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
+		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
+		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
+		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
+		break ;
+	default:	/* Write BYTE data */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+		break ;
+	}
+
+	return res ;
+}
+
+void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	if (lm85debug) {
+		printk("lm85(%d): Initializing device\n", client->id);
+	}
+
+	/* Warn if part was not "READY" */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	if (lm85debug) {
+		printk("lm85(%d): LM85_REG_CONFIG is: 0x%02x\n", client->id, value );
+	}
+	if( value & 0x02 ) {
+		printk("lm85(%d): Client (%d,0x%02x) config is locked.\n",
+			    client->id,
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( ! (value & 0x04) ) {
+		printk("lm85(%d): Client (%d,0x%02x) is not ready.\n",
+			    client->id,
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( value & 0x10
+	    && ( data->type == adm1027
+		|| data->type == adt7463 ) ) {
+		printk("lm85(%d): Client (%d,0x%02x) VxI mode is set.  "
+			"Please report this to the lm85 maintainer.\n",
+			    client->id,
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.
+	 */
+
+	/* Start monitoring */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	/* Try to clear LOCK, Set START, save everything else */
+	value = (value & ~ 0x02) | 0x01 ;
+	if (lm85debug) {
+		printk("lm85(%d): Setting CONFIG to: 0x%02x\n", client->id, value );
+	}
+	lm85_write_value(client, LM85_REG_CONFIG, value);
+
+}
+
+void lm85_update_client(struct i2c_client *client)
+{
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if ( !data->valid ||
+	     (jiffies - data->last_reading > LM85_DATA_INTERVAL ) ) {
+		/* Things that change quickly */
+
+		if (lm85debug) {
+			printk("lm85(%d): Reading sensor values\n", client->id);
+		}
+		/* Have to read extended bits first to "freeze" the
+		 * more significant bits that are read later.
+		 */
+		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+			data->extend_adc =
+			    lm85_read_value(client, ADM1027_REG_EXTEND_ADC1);
+		}
+
+		for (i = 0; i <= 4; ++i) {
+			data->in[i] =
+			    lm85_read_value(client, LM85_REG_IN(i));
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp[i] =
+			    lm85_read_value(client, LM85_REG_TEMP(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->pwm[i] =
+			    lm85_read_value(client, LM85_REG_PWM(i));
+		}
+
+		if ( data->type == adt7463 ) {
+			if( data->therm_total < ULONG_MAX - 256 ) {
+			    data->therm_total +=
+				lm85_read_value(client, ADT7463_REG_THERM );
+			}
+		}
+
+		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+		data->last_reading = jiffies ;
+	};  /* last_reading */
+
+	if ( !data->valid ||
+	     (jiffies - data->last_config > LM85_CONFIG_INTERVAL) ) {
+		/* Things that don't change often */
+
+		if (lm85debug) {
+			printk("lm85(%d): Reading config values\n", client->id);
+		}
+		for (i = 0; i <= 4; ++i) {
+			data->in_min[i] =
+			    lm85_read_value(client, LM85_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp_min[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+			data->temp_max[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+		}
+
+		data->vid = lm85_read_value(client, LM85_REG_VID);
+
+		for (i = 0; i <= 2; ++i) {
+			int val ;
+			data->autofan[i].config =
+			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+			data->autofan[i].freq = val & 0x07 ;
+			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].min_pwm =
+			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+			data->zone[i].limit =
+			    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+			data->zone[i].critical =
+			    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+		}
+
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+		data->smooth[0] = i & 0x0f ;
+		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
+		data->autofan[0].min_off = (i & 0x20) != 0 ;
+		data->autofan[1].min_off = (i & 0x40) != 0 ;
+		data->autofan[2].min_off = (i & 0x80) != 0 ;
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
+		data->smooth[1] = (i>>4) & 0x0f ;
+		data->smooth[2] = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+		data->zone[0].hyst = (i>>4) & 0x0f ;
+		data->zone[1].hyst = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+		data->zone[2].hyst = (i>>4) & 0x0f ;
+
+		if ( (data->type == lm85b) || (data->type == lm85c) ) {
+			data->tach_mode = lm85_read_value(client,
+				LM85_REG_TACH_MODE );
+			data->spinup_ctl = lm85_read_value(client,
+				LM85_REG_SPINUP_CTL );
+		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
+			if ( data->type == adt7463 ) {
+				for (i = 0; i <= 2; ++i) {
+				    data->oppoint[i] = lm85_read_value(client,
+					ADT7463_REG_OPPOINT(i) );
+				}
+				data->tmin_ctl = lm85_read_value(client,
+					ADT7463_REG_TMIN_CTL1 );
+				data->therm_limit = lm85_read_value(client,
+					ADT7463_REG_THERM_LIMIT );
+			}
+			for (i = 0; i <= 2; ++i) {
+			    data->temp_offset[i] = lm85_read_value(client,
+				ADM1027_REG_TEMP_OFFSET(i) );
+			}
+			data->tach_mode = lm85_read_value(client,
+				ADM1027_REG_CONFIG3 );
+			data->fan_ppr = lm85_read_value(client,
+				ADM1027_REG_FAN_PPR );
+		}
+	
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	data->valid = 1;
+
+	up(&data->update_lock);
+}
+
+
+static int __init sm_lm85_init(void)
+{
+	return i2c_add_driver(&lm85_driver);
+}
+
+static void  __exit sm_lm85_exit(void)
+{
+	i2c_del_driver(&lm85_driver);
+}
+
+/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
+ * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
+ *     post 2.7.0 CVS changes
+ */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>");
+MODULE_DESCRIPTION("LM85-B, LM85-C driver");
+MODULE_PARM(lm85debug, "i");
+MODULE_PARM_DESC(lm85debug, "Enable debugging statements");
+
+module_init(sm_lm85_init);
+module_exit(sm_lm85_exit);

drivers/i2c/i2c-core.c

@@ -510,7 +510,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
 		msg.addr   = client->addr;
 		msg.flags = client->flags & I2C_M_TEN;
 		msg.len = count;
-		(const char *)msg.buf = buf;
+		msg.buf = (char *)buf;
 	
 		DEB2(dev_dbg(&client->adapter->dev, "master_send: writing %d bytes.\n",
 				count));
@@ -861,13 +861,13 @@ int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
 	return 0;	
 }
 
-extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value)
+s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
 {
 	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
  	                      value,0,I2C_SMBUS_QUICK,NULL);
 }
 
-extern s32 i2c_smbus_read_byte(struct i2c_client * client)
+s32 i2c_smbus_read_byte(struct i2c_client *client)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -877,14 +877,14 @@ extern s32 i2c_smbus_read_byte(struct i2c_client * client)
 		return 0x0FF & data.byte;
 }
 
-extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value)
+s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
 {
 	union i2c_smbus_data data;	/* only for PEC */
 	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
 	                      I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
 }
 
-extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command)
+s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -894,8 +894,7 @@ extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command)
 		return 0x0FF & data.byte;
 }
 
-extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command,
-                                     u8 value)
+s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
 {
 	union i2c_smbus_data data;
 	data.byte = value;
@@ -904,7 +903,7 @@ extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command,
 	                      I2C_SMBUS_BYTE_DATA,&data);
 }
 
-extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command)
+s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -914,8 +913,7 @@ extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command)
 		return 0x0FFFF & data.word;
 }
 
-extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
-                                     u8 command, u16 value)
+s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
@@ -924,8 +922,7 @@ extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
 	                      I2C_SMBUS_WORD_DATA,&data);
 }
 
-extern s32 i2c_smbus_process_call(struct i2c_client * client,
-                                  u8 command, u16 value)
+s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
@@ -938,8 +935,7 @@ extern s32 i2c_smbus_process_call(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
-                                     u8 command, u8 *values)
+s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -954,8 +950,7 @@ extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
 	}
 }
 
-extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
-                                      u8 command, u8 length, u8 *values)
+s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -970,8 +965,7 @@ extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_block_process_call(struct i2c_client * client,
-                                        u8 command, u8 length, u8 *values)
+s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -990,8 +984,7 @@ extern s32 i2c_smbus_block_process_call(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
-                                         u8 command, u8 *values)
+s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -1006,8 +999,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
 	}
 }
 
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
-                                          u8 command, u8 length, u8 *values)
+s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;

drivers/i2c/i2c-dev.c

@@ -122,7 +122,7 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf)
 }
 static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
 
-static ssize_t i2cdev_read (struct file *file, char *buf, size_t count,
+static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
                             loff_t *offset)
 {
 	char *tmp;
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char *buf, size_t count,
 	return ret;
 }
 
-static ssize_t i2cdev_write (struct file *file, const char *buf, size_t count,
+static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t count,
                              loff_t *offset)
 {
 	int ret;
@@ -211,12 +211,12 @@ int i2cdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
 		return 0;
 	case I2C_FUNCS:
 		funcs = i2c_get_functionality(client->adapter);
-		return (copy_to_user((unsigned long *)arg,&funcs,
+		return (copy_to_user((unsigned long __user *)arg, &funcs,
 		                     sizeof(unsigned long)))?-EFAULT:0;
 
         case I2C_RDWR:
 		if (copy_from_user(&rdwr_arg, 
-				   (struct i2c_rdwr_ioctl_data *)arg, 
+				   (struct i2c_rdwr_ioctl_data __user *)arg, 
 				   sizeof(rdwr_arg)))
 			return -EFAULT;
 
@@ -284,7 +284,7 @@ int i2cdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
 
 	case I2C_SMBUS:
 		if (copy_from_user(&data_arg,
-		                   (struct i2c_smbus_ioctl_data *) arg,
+		                   (struct i2c_smbus_ioctl_data __user *) arg,
 		                   sizeof(struct i2c_smbus_ioctl_data)))
 			return -EFAULT;
 		if ((data_arg.size != I2C_SMBUS_BYTE) && 

drivers/i2c/i2c-iop3xx.c

+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx                */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+/*
+   With acknowledgements to i2c-algo-ibm_ocp.c by 
+   Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com
+
+   And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund:
+
+     Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
+   
+   And which acknowledged Kysti Mlkki <kmalkki@cc.hut.fi>,
+   Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
+
+  ---------------------------------------------------------------------------*/
+
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+
+
+#include <asm/arch-iop3xx/iop321.h>
+#include <asm/arch-iop3xx/iop321-irqs.h>
+#include "i2c-iop3xx.h"
+
+
+/* ----- global defines ----------------------------------------------- */
+#define PASSERT(x) do { if (!(x) ) \
+		printk(KERN_CRIT "PASSERT %s in %s:%d\n", #x, __FILE__, __LINE__ );\
+	} while (0)
+
+
+/* ----- global variables ---------------------------------------------	*/
+
+
+static inline unsigned char iic_cook_addr(struct i2c_msg *msg) 
+{
+	unsigned char addr;
+
+	addr = (msg->addr << 1);
+
+	if (msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	/* PGM: what is M_REV_DIR_ADDR - do we need it ?? */
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
+	return addr;   
+}
+
+
+static inline void iop3xx_adap_reset(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	/* Follows devman 9.3 */
+	*iop3xx_adap->biu->CR = IOP321_ICR_UNIT_RESET;
+	*iop3xx_adap->biu->SR = IOP321_ISR_CLEARBITS;
+	*iop3xx_adap->biu->CR = 0;
+} 
+
+static inline void iop3xx_adap_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	*iop3xx_adap->biu->SAR = MYSAR;
+}
+
+static inline void iop3xx_adap_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	u32 cr = IOP321_ICR_GCD|IOP321_ICR_SCLEN|IOP321_ICR_UE;
+
+	/* NB SR bits not same position as CR IE bits :-( */
+	iop3xx_adap->biu->SR_enabled = 
+		IOP321_ISR_ALD | IOP321_ISR_BERRD |
+		IOP321_ISR_RXFULL | IOP321_ISR_TXEMPTY;
+
+	cr |= IOP321_ICR_ALDIE | IOP321_ICR_BERRIE |
+		IOP321_ICR_RXFULLIE | IOP321_ICR_TXEMPTYIE;
+
+	*iop3xx_adap->biu->CR = cr;
+}
+
+static void iop3xx_adap_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	
+	cr &= ~(IOP321_ICR_MSTART | IOP321_ICR_TBYTE | 
+		IOP321_ICR_MSTOP | IOP321_ICR_SCLEN);
+	*iop3xx_adap->biu->CR = cr;
+}
+
+static void iop3xx_adap_final_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	
+	cr &= ~(IOP321_ICR_ALDIE | IOP321_ICR_BERRIE |
+		IOP321_ICR_RXFULLIE | IOP321_ICR_TXEMPTYIE);
+	iop3xx_adap->biu->SR_enabled = 0;
+	*iop3xx_adap->biu->CR = cr;
+}
+
+/* 
+ * NB: the handler has to clear the source of the interrupt! 
+ * Then it passes the SR flags of interest to BH via adap data
+ */
+static void iop3xx_i2c_handler(int this_irq, 
+				void *dev_id, 
+				struct pt_regs *regs) 
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id;
+
+	u32 sr = *iop3xx_adap->biu->SR;
+
+	if ((sr &= iop3xx_adap->biu->SR_enabled)) {
+		*iop3xx_adap->biu->SR = sr;
+		iop3xx_adap->biu->SR_received |= sr;
+		wake_up_interruptible(&iop3xx_adap->waitq);
+	}
+}
+
+/* check all error conditions, clear them , report most important */
+static int iop3xx_adap_error(u32 sr)
+{
+	int rc = 0;
+
+	if ((sr&IOP321_ISR_BERRD)) {
+		if ( !rc ) rc = -I2C_ERR_BERR;
+	}
+	if ((sr&IOP321_ISR_ALD)) {
+		if ( !rc ) rc = -I2C_ERR_ALD;		
+	}
+	return rc;	
+}
+
+static inline u32 get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	unsigned long flags;
+	u32 sr;
+
+	spin_lock_irqsave(&iop3xx_adap->lock, flags);
+	sr = iop3xx_adap->biu->SR_received;
+	iop3xx_adap->biu->SR_received = 0;
+	spin_unlock_irqrestore(&iop3xx_adap->lock, flags);
+
+	return sr;
+}
+
+/*
+ * sleep until interrupted, then recover and analyse the SR
+ * saved by handler
+ */
+typedef int (* compare_func)(unsigned test, unsigned mask);
+/* returns 1 on correct comparison */
+
+static int iop3xx_adap_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, 
+				  unsigned flags, unsigned* status,
+				  compare_func compare)
+{
+	unsigned sr = 0;
+	int interrupted;
+	int done;
+	int rc;
+
+	do {
+		interrupted = wait_event_interruptible_timeout (
+			iop3xx_adap->waitq,
+			(done = compare( sr = get_srstat(iop3xx_adap),flags )),
+			iop3xx_adap->timeout
+			);
+		if ((rc = iop3xx_adap_error(sr)) < 0) {
+			*status = sr;
+			return rc;
+		}else if (!interrupted) {
+			*status = sr;
+			return rc = -ETIMEDOUT;
+		}
+	} while(!done);
+
+	*status = sr;
+
+	return rc = 0;
+}
+
+/*
+ * Concrete compare_funcs 
+ */
+static int all_bits_clear(unsigned test, unsigned mask)
+{
+	return (test & mask) == 0;
+}
+static int any_bits_set(unsigned test, unsigned mask)
+{
+	return (test & mask) != 0;
+}
+
+static int iop3xx_adap_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, 
+	        IOP321_ISR_TXEMPTY|IOP321_ISR_ALD|IOP321_ISR_BERRD,
+		status, any_bits_set);
+}
+
+static int iop3xx_adap_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, 
+		IOP321_ISR_RXFULL|IOP321_ISR_ALD|IOP321_ISR_BERRD,
+		status,	any_bits_set);
+}
+
+static int iop3xx_adap_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status)
+{
+	return iop3xx_adap_wait_event( 
+		iop3xx_adap, IOP321_ISR_UNITBUSY, status, all_bits_clear);
+}
+
+/*
+ * Description: This performs the IOP3xx initialization sequence
+ * Valid for IOP321. Maybe valid for IOP310?.
+ */
+static int iop3xx_adap_init (struct i2c_algo_iop3xx_data *iop3xx_adap)
+{
+	*IOP321_GPOD &= ~(iop3xx_adap->channel==0 ?
+			  IOP321_GPOD_I2C0:
+			  IOP321_GPOD_I2C1);
+
+	iop3xx_adap_reset(iop3xx_adap);
+	iop3xx_adap_set_slave_addr(iop3xx_adap);
+	iop3xx_adap_enable(iop3xx_adap);
+	
+        return 0;
+}
+
+static int iop3xx_adap_send_target_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap,
+					      struct i2c_msg* msg)
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	*iop3xx_adap->biu->DBR = iic_cook_addr(msg);
+	
+	cr &= ~(IOP321_ICR_MSTOP | IOP321_ICR_NACK);
+	cr |= IOP321_ICR_MSTART | IOP321_ICR_TBYTE;
+
+	*iop3xx_adap->biu->CR = cr;
+	rc = iop3xx_adap_wait_tx_done(iop3xx_adap, &status);
+	/* this assert fires every time, contrary to IOP manual	
+	PASSERT((status&IOP321_ISR_UNITBUSY)!=0);
+	*/
+	PASSERT((status&IOP321_ISR_RXREAD)==0);
+	     
+	return rc;
+}
+
+static int iop3xx_adap_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, int stop)
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	*iop3xx_adap->biu->DBR = byte;
+	cr &= ~IOP321_ICR_MSTART;
+	if (stop) {
+		cr |= IOP321_ICR_MSTOP;
+	} else {
+		cr &= ~IOP321_ICR_MSTOP;
+	}
+	*iop3xx_adap->biu->CR = cr |= IOP321_ICR_TBYTE;
+	rc = iop3xx_adap_wait_tx_done(iop3xx_adap, &status);
+
+	return rc;
+} 
+
+static int iop3xx_adap_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap,
+				 char* byte, int stop)
+{
+	unsigned cr = *iop3xx_adap->biu->CR;
+	int status;
+	int rc;
+
+	cr &= ~IOP321_ICR_MSTART;
+
+	if (stop) {
+		cr |= IOP321_ICR_MSTOP|IOP321_ICR_NACK;
+	} else {
+		cr &= ~(IOP321_ICR_MSTOP|IOP321_ICR_NACK);
+	}
+	*iop3xx_adap->biu->CR = cr |= IOP321_ICR_TBYTE;
+
+	rc = iop3xx_adap_wait_rx_done(iop3xx_adap, &status);
+
+	*byte = *iop3xx_adap->biu->DBR;
+
+	return rc;
+}
+
+static int iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, 
+				 const char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii) {
+		rc = iop3xx_adap_write_byte(iop3xx_adap, buf[ii], ii==count-1);
+	}
+	return rc;
+}
+
+static int iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, 
+				char *buf, int count)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int ii;
+	int rc = 0;
+
+	for (ii = 0; rc == 0 && ii != count; ++ii) {
+		rc = iop3xx_adap_read_byte(iop3xx_adap, &buf[ii], ii==count-1);
+	}
+	return rc;
+}
+
+/*
+ * Description:  This function implements combined transactions.  Combined
+ * transactions consist of combinations of reading and writing blocks of data.
+ * FROM THE SAME ADDRESS
+ * Each transfer (i.e. a read or a write) is separated by a repeated start
+ * condition.
+ */
+static int iop3xx_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) 
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int rc;
+
+	rc = iop3xx_adap_send_target_slave_addr(iop3xx_adap, pmsg);
+	if (rc < 0) {
+		return rc;
+	}
+
+	if ((pmsg->flags&I2C_M_RD)) {
+		return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len);
+	} else {
+		return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len);
+	}
+}
+
+/*
+ * master_xfer() - main read/write entry
+ */
+static int iop3xx_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data;
+	int im = 0;
+	int ret = 0;
+	int status;
+
+	iop3xx_adap_wait_idle(iop3xx_adap, &status);
+	iop3xx_adap_reset(iop3xx_adap);
+	iop3xx_adap_enable(iop3xx_adap);
+
+	for (im = 0; ret == 0 && im != num; ++im) {
+		ret = iop3xx_handle_msg(i2c_adap, &msgs[im]);
+	}
+
+	iop3xx_adap_transaction_cleanup(iop3xx_adap);
+
+	return ret;   
+}
+
+static int algo_control(struct i2c_adapter *adapter, unsigned int cmd,
+			unsigned long arg)
+{
+	return 0;
+}
+
+static u32 iic_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm iic_algo = {
+	.name		= "IOP3xx I2C algorithm",
+	.id		= I2C_ALGO_OCP_IOP3XX,
+	.master_xfer	= iop3xx_master_xfer,
+	.algo_control	= algo_control,
+	.functionality	= iic_func,
+};
+
+/* 
+ * registering functions to load algorithms at runtime 
+ */
+static int i2c_iop3xx_add_bus(struct i2c_adapter *iic_adap)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = iic_adap->algo_data;
+
+	if (!request_region( REGION_START(iop3xx_adap), 
+			      REGION_LENGTH(iop3xx_adap),
+			      iic_adap->name)) {
+		return -ENODEV;
+	}
+
+	init_waitqueue_head(&iop3xx_adap->waitq);
+	spin_lock_init(&iop3xx_adap->lock);
+
+	if (request_irq( 
+		     iop3xx_adap->biu->irq,
+		     iop3xx_i2c_handler,
+		     /* SA_SAMPLE_RANDOM */ 0,
+		     iic_adap->name,
+		     iop3xx_adap)) {
+		return -ENODEV;
+	}			  
+
+	/* register new iic_adapter to i2c module... */
+	iic_adap->id |= iic_algo.id;
+	iic_adap->algo = &iic_algo;
+
+	iic_adap->timeout = 100;	/* default values, should */
+	iic_adap->retries = 3;		/* be replaced by defines */
+
+	iop3xx_adap_init(iic_adap->algo_data);
+	i2c_add_adapter(iic_adap);
+	return 0;
+}
+
+static int i2c_iop3xx_del_bus(struct i2c_adapter *iic_adap)
+{
+	struct i2c_algo_iop3xx_data *iop3xx_adap = iic_adap->algo_data;
+
+	iop3xx_adap_final_cleanup(iop3xx_adap);
+	free_irq(iop3xx_adap->biu->irq, iop3xx_adap);
+
+	release_region(REGION_START(iop3xx_adap), REGION_LENGTH(iop3xx_adap));
+
+	return i2c_del_adapter(iic_adap);
+}
+
+#ifdef CONFIG_ARCH_IOP321
+
+static struct iop3xx_biu biu0 = {
+	.CR	= IOP321_ICR0,
+	.SR	= IOP321_ISR0,
+	.SAR	= IOP321_ISAR0,
+	.DBR	= IOP321_IDBR0,
+	.BMR	= IOP321_IBMR0,
+	.irq	= IRQ_IOP321_I2C_0,
+};
+
+static struct iop3xx_biu biu1 = {
+	.CR	= IOP321_ICR1,
+	.SR	= IOP321_ISR1,
+	.SAR	= IOP321_ISAR1,
+	.DBR	= IOP321_IDBR1,
+	.BMR	= IOP321_IBMR1,
+	.irq	= IRQ_IOP321_I2C_1,
+};
+
+#define ADAPTER_NAME_ROOT "IOP321 i2c biu adapter "
+#else
+#error Please define the BIU struct iop3xx_biu for your processor arch
+#endif
+
+static struct i2c_algo_iop3xx_data algo_iop3xx_data0 = {
+	.channel		= 0,
+	.biu			= &biu0,
+	.timeout		= 1*HZ,
+};
+static struct i2c_algo_iop3xx_data algo_iop3xx_data1 = {
+	.channel		= 1,
+	.biu			= &biu1,
+	.timeout		= 1*HZ,
+};
+
+static struct i2c_adapter iop3xx_ops0 = {
+	.owner			= THIS_MODULE,
+	.name			= ADAPTER_NAME_ROOT "0",
+	.id			= I2C_HW_IOP321,
+	.algo_data		= &algo_iop3xx_data0,
+};
+static struct i2c_adapter iop3xx_ops1 = {
+	.owner			= THIS_MODULE,
+	.name			= ADAPTER_NAME_ROOT "1",
+	.id			= I2C_HW_IOP321,
+	.algo_data		= &algo_iop3xx_data1,
+};
+
+static int __init i2c_iop3xx_init (void)
+{
+	return i2c_iop3xx_add_bus(&iop3xx_ops0) ||
+		i2c_iop3xx_add_bus(&iop3xx_ops1);
+}
+
+static void __exit i2c_iop3xx_exit (void)
+{
+	i2c_iop3xx_del_bus(&iop3xx_ops0);
+	i2c_iop3xx_del_bus(&iop3xx_ops1);
+}
+
+module_init (i2c_iop3xx_init);
+module_exit (i2c_iop3xx_exit);
+
+MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>");
+MODULE_DESCRIPTION("IOP3xx iic algorithm and driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(i2c_debug,"i");
+
+MODULE_PARM_DESC(i2c_debug, "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol");
+

drivers/i2c/i2c-iop3xx.h

+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c         */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP321_ICR_FAST_MODE	0x8000	/* 1=400kBps, 0=100kBps */
+#define IOP321_ICR_UNIT_RESET	0x4000	/* 1=RESET */
+#define IOP321_ICR_SADIE	0x2000	/* 1=Slave Detect Interrupt Enable */
+#define IOP321_ICR_ALDIE	0x1000	/* 1=Arb Loss Detect Interrupt Enable */
+#define IOP321_ICR_SSDIE	0x0800	/* 1=Slave STOP Detect Interrupt Enable */
+#define IOP321_ICR_BERRIE	0x0400	/* 1=Bus Error Interrupt Enable */
+#define IOP321_ICR_RXFULLIE	0x0200	/* 1=Receive Full Interrupt Enable */
+#define IOP321_ICR_TXEMPTYIE	0x0100	/* 1=Transmit Empty Interrupt Enable */
+#define IOP321_ICR_GCD		0x0080	/* 1=General Call Disable */
+/*
+ * IOP321_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP321_ICR_UE		0x0040	/* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems, 
+ * the user needs to ensure that the GPIO Output Data Register - 
+ * GPOD bits associated with an I2C port are cleared prior to setting 
+ * the enable bit for that I2C serial port. 
+ * The user prepares to enable I2C port 0 and 
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */
+#define IOP321_ICR_SCLEN	0x0020	/* 1=SCL enable for master mode */
+#define IOP321_ICR_MABORT	0x0010	/* 1=Send a STOP with no data 
+					 * NB TBYTE must be clear */
+#define IOP321_ICR_TBYTE	0x0008	/* 1=Send/Receive a byte. i2c clears */
+#define IOP321_ICR_NACK		0x0004	/* 1=reply with NACK */
+#define IOP321_ICR_MSTOP	0x0002	/* 1=send a STOP after next data byte */
+#define IOP321_ICR_MSTART	0x0001	/* 1=initiate a START */
+
+
+#define IOP321_ISR_BERRD	0x0400	/* 1=BUS ERROR Detected */
+#define IOP321_ISR_SAD		0x0200	/* 1=Slave ADdress Detected */
+#define IOP321_ISR_GCAD		0x0100	/* 1=General Call Address Detected */
+#define IOP321_ISR_RXFULL	0x0080	/* 1=Receive Full */
+#define IOP321_ISR_TXEMPTY	0x0040	/* 1=Transmit Empty */
+#define IOP321_ISR_ALD		0x0020	/* 1=Arbitration Loss Detected */
+#define IOP321_ISR_SSD		0x0010	/* 1=Slave STOP Detected */
+#define IOP321_ISR_BBUSY	0x0008	/* 1=Bus BUSY */
+#define IOP321_ISR_UNITBUSY	0x0004	/* 1=Unit Busy */
+#define IOP321_ISR_NACK		0x0002	/* 1=Unit Rx or Tx a NACK */
+#define IOP321_ISR_RXREAD	0x0001	/* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP321_ISR_CLEARBITS	0x07f0
+
+#define IOP321_ISAR_SAMASK	0x007f
+
+#define IOP321_IDBR_MASK	0x00ff
+
+#define IOP321_IBMR_SCL		0x0002
+#define IOP321_IBMR_SDA		0x0001
+
+#define IOP321_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
+#define IOP321_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
+
+#define MYSAR			0x02	/* SWAG a suitable slave address */
+
+#define I2C_ERR			321
+#define I2C_ERR_BERR		(I2C_ERR+0)
+#define I2C_ERR_ALD		(I2C_ERR+1)
+
+
+struct iop3xx_biu {                /* Bus Interface Unit - the hardware */
+/* physical hardware defs - regs*/
+	u32 *CR;
+	u32 *SR;
+	u32 *SAR;
+	u32 *DBR;
+	u32 *BMR;
+/* irq bit vector */
+	u32 irq;
+/* stored flags */
+	u32 SR_enabled, SR_received;
+};
+
+struct i2c_algo_iop3xx_data {
+	int channel;
+
+	wait_queue_head_t waitq;
+	spinlock_t lock;
+	int timeout;
+	struct iop3xx_biu* biu;
+};
+
+#define REGION_START(adap)	((u32)((adap)->biu->CR))
+#define REGION_END(adap)	((u32)((adap)->biu->BMR+1))
+#define REGION_LENGTH(adap)	(REGION_END(adap)-REGION_START(adap))
+
+#define IRQ_STATUS_MASK(adap)	(1<<adap->biu->irq)
+
+#endif /* I2C_IOP3XX_H */

include/linux/i2c-dev.h

@@ -34,12 +34,12 @@ struct i2c_smbus_ioctl_data {
 	__u8 read_write;
 	__u8 command;
 	__u32 size;
-	union i2c_smbus_data *data;
+	union i2c_smbus_data __user *data;
 };
 
 /* This is the structure as used in the I2C_RDWR ioctl call */
 struct i2c_rdwr_ioctl_data {
-	struct i2c_msg *msgs;	/* pointers to i2c_msgs */
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
 	__u32 nmsgs;			/* number of i2c_msgs */
 };
 

include/linux/i2c.h

@@ -176,7 +176,7 @@ static inline void *i2c_get_clientdata (struct i2c_client *dev)
 
 static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
 {
-	return dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata (&dev->dev, data);
 }
 
 #define I2C_DEVNAME(str)   .dev = { .name = str }
@@ -261,7 +261,7 @@ static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
 
 static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
 {
-	return dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata (&dev->dev, data);
 }
 
 /*flags for the driver struct: */