Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -46,10 +46,12 @@ PIT Timer required properties:
   shared across all System Controller members.
 
 System Timer (ST) required properties:
-- compatible: Should be "atmel,at91rm9200-st"
+- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+Its subnodes can be:
+- watchdog: compatible should be "atmel,at91rm9200-wdt"
 
 TC/TCLIB Timer required properties:
 - compatible: Should be "atmel,<chip>-tcb".

Documentation/devicetree/bindings/arm/cci.txt

@@ -94,8 +94,11 @@ specific to ARM.
 		- compatible
 			Usage: required
 			Value type: <string>
-			Definition: must be "arm,cci-400-pmu"
-
+			Definition: Must contain one of:
+				 "arm,cci-400-pmu,r0"
+				 "arm,cci-400-pmu,r1"
+				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
+						      secure acces to CCI registers
 		- reg:
 			Usage: required
 			Value type: Integer cells. A register entry, expressed

Documentation/devicetree/bindings/bus/renesas,bsc.txt

+Renesas Bus State Controller (BSC)
+==================================
+
+The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
+Bridge", or "External Bus Interface") can be found in several Renesas ARM SoCs.
+It provides an external bus for connecting multiple external devices to the
+SoC, driving several chip select lines, for e.g. NOR FLASH, Ethernet and USB.
+
+While the BSC is a fairly simple memory-mapped bus, it may be part of a PM
+domain, and may have a gateable functional clock.
+Before a device connected to the BSC can be accessed, the PM domain
+containing the BSC must be powered on, and the functional clock
+driving the BSC must be enabled.
+
+The bindings for the BSC extend the bindings for "simple-pm-bus".
+
+
+Required properties
+  - compatible: Must contain an SoC-specific value, and "renesas,bsc" and
+		"simple-pm-bus" as fallbacks.
+                SoC-specific values can be:
+		"renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4)
+		"renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0)
+  - #address-cells, #size-cells, ranges: Must describe the mapping between
+		parent address and child address spaces.
+  - reg: Must contain the base address and length to access the bus controller.
+
+Optional properties:
+  - interrupts: Must contain a reference to the BSC interrupt, if available.
+  - clocks: Must contain a reference to the functional clock, if available.
+  - power-domains: Must contain a reference to the PM domain, if available.
+
+
+Example:
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x20000000>;
+		reg = <0xfec10000 0x400>;
+		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_a4s>;
+	};

Documentation/devicetree/bindings/bus/simple-pm-bus.txt

+Simple Power-Managed Bus
+========================
+
+A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+driver, as it's typically initialized by the boot loader.
+
+However, its bus controller is part of a PM domain, or under the control of a
+functional clock.  Hence, the bus controller's PM domain and/or clock must be
+enabled for child devices connected to the bus (either on-SoC or externally)
+to function.
+
+While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
+in ePAPR, it is not an extension of "simple-bus".
+
+
+Required properties:
+  - compatible: Must contain at least "simple-pm-bus".
+		Must not contain "simple-bus".
+		It's recommended to let this be preceded by one or more
+		vendor-specific compatible values.
+  - #address-cells, #size-cells, ranges: Must describe the mapping between
+		parent address and child address spaces.
+
+Optional platform-specific properties for clock or PM domain control (at least
+one of them is required):
+  - clocks: Must contain a reference to the functional clock(s),
+  - power-domains: Must contain a reference to the PM domain.
+Please refer to the binding documentation for the clock and/or PM domain
+providers for more details.
+
+
+Example:
+
+	bsc: bus@fec10000 {
+		compatible = "renesas,bsc-sh73a0", "renesas,bsc",
+			     "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x20000000>;
+		reg = <0xfec10000 0x400>;
+		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&zb_clk>;
+		power-domains = <&pd_a4s>;
+	};

Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt

@@ -6,7 +6,8 @@ configuration settings.  The mode setting will govern the input/output mode of
 the 4 GSBI IOs.
 
 Required properties:
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- compatible:	Should contain "qcom,gsbi-v1.0.0"
+- cell-index:	Should contain the GSBI index
 - reg: Address range for GSBI registers
 - clocks: required clock
 - clock-names: must contain "iface" entry
@@ -16,6 +17,8 @@ Required properties:
 Optional properties:
 - qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
   dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
+  dma.
 
 Required properties if child node exists:
 - #address-cells: Must be 1
@@ -39,6 +42,7 @@ Example for APQ8064:
 
 	gsbi4@16300000 {
 		compatible = "qcom,gsbi-v1.0.0";
+		cell-index = <4>;
 		reg = <0x16300000 0x100>;
 		clocks = <&gcc GSBI4_H_CLK>;
 		clock-names = "iface";
@@ -48,6 +52,8 @@ Example for APQ8064:
 		qcom,mode = <GSBI_PROT_I2C_UART>;
 		qcom,crci = <GSBI_CRCI_QUP>;
 
+		syscon-tcsr = <&tcsr>;
+
 		/* child nodes go under here */
 
 		i2c_qup4: i2c@16380000 {
@@ -76,3 +82,7 @@ Example for APQ8064:
 		};
 	};
 
+	tcsr: syscon@1a400000 {
+		compatible = "qcom,apq8064-tcsr", "syscon";
+		reg = <0x1a400000 0x100>;
+	};

MAINTAINERS

@@ -1327,6 +1327,7 @@ F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
 F:	drivers/*/pm8???-*
 F:	drivers/mfd/ssbi.c
+F:	drivers/firmware/qcom_scm.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT

arch/arm/Kconfig

@@ -2146,6 +2146,8 @@ source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+source "drivers/firmware/Kconfig"
+
 source "fs/Kconfig"
 
 source "arch/arm/Kconfig.debug"

arch/arm/boot/dts/at91rm9200.dtsi

@@ -356,9 +356,13 @@ macb0_clk: macb0_clk {
 			};
 
 			st: timer@fffffd00 {
-				compatible = "atmel,at91rm9200-st";
+				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+
+				watchdog {
+					compatible = "atmel,at91rm9200-wdt";
+				};
 			};
 
 			rtc: rtc@fffffe00 {

arch/arm/mach-qcom/scm-boot.c → arch/arm/include/asm/arm-cci.h

-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/*
+ * arch/arm/include/asm/arm-cci.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -10,30 +13,30 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <linux/module.h>
-#include <linux/slab.h>
+#ifndef __ASM_ARM_CCI_H
+#define __ASM_ARM_CCI_H
 
-#include "scm.h"
-#include "scm-boot.h"
+#ifdef CONFIG_MCPM
+#include <asm/mcpm.h>
 
 /*
- * Set the cold/warm boot address for one of the CPU cores.
+ * We don't have a reliable way of detecting whether,
+ * if we have access to secure-only registers, unless
+ * mcpm is registered.
  */
-int scm_set_boot_addr(u32 addr, int flags)
+static inline bool platform_has_secure_cci_access(void)
 {
-	struct {
-		__le32 flags;
-		__le32 addr;
-	} cmd;
+	return mcpm_is_available();
+}
 
-	cmd.addr = cpu_to_le32(addr);
-	cmd.flags = cpu_to_le32(flags);
-	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
-			&cmd, sizeof(cmd), NULL, 0);
+#else
+static inline bool platform_has_secure_cci_access(void)
+{
+	return false;
 }
-EXPORT_SYMBOL(scm_set_boot_addr);
+#endif
+
+#endif

arch/arm/mach-at91/Kconfig

@@ -77,6 +77,7 @@ if SOC_SAM_V4_V5
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select ATMEL_AIC_IRQ
+	select ATMEL_ST
 	select COMMON_CLK_AT91
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS

arch/arm/mach-at91/Makefile

@@ -7,7 +7,7 @@ obj-y		:= soc.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
 
 # CPU-specific support
-obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
 

arch/arm/mach-at91/at91rm9200.c

@@ -15,8 +15,6 @@
 #include <asm/mach/arch.h>
 #include <asm/system_misc.h>
 
-#include <mach/at91_st.h>
-
 #include "generic.h"
 #include "soc.h"
 
@@ -25,21 +23,6 @@ static const struct at91_soc rm9200_socs[] = {
 	{ /* sentinel */ },
 };
 
-static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
-{
-	/*
-	 * Perform a hardware reset with the use of the Watchdog timer.
-	 */
-	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-static void __init at91rm9200_dt_timer_init(void)
-{
-	of_clk_init(NULL);
-	at91rm9200_timer_init();
-}
-
 static void __init at91rm9200_dt_device_init(void)
 {
 	struct soc_device *soc;
@@ -52,7 +35,6 @@ static void __init at91rm9200_dt_device_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
 	arm_pm_idle = at91rm9200_idle;
-	arm_pm_restart = at91rm9200_restart;
 	at91rm9200_pm_init();
 }
 
@@ -62,7 +44,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
-	.init_time      = at91rm9200_dt_timer_init,
 	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END

arch/arm/mach-at91/generic.h

@@ -18,9 +18,6 @@
 extern void __init at91_map_io(void);
 extern void __init at91_alt_map_io(void);
 
- /* Timer */
-extern void at91rm9200_timer_init(void);
-
 /* idle */
 extern void at91rm9200_idle(void);
 extern void at91sam9_idle(void);

arch/arm/mach-at91/include/mach/at91_st.h

-/*
- * arch/arm/mach-at91/include/mach/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_st_base;
-
-#define at91_st_read(field) \
-	__raw_readl(at91_st_base + field)
-
-#define at91_st_write(field, value) \
-	__raw_writel(value, at91_st_base + field)
-#else
-.extern at91_st_base
-#endif
-
-#define	AT91_ST_CR		0x00			/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		0x04			/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		0x08			/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		0x0c			/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		0x10			/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		0x14			/* Interrupt Enable Register */
-#define	AT91_ST_IDR		0x18			/* Interrupt Disable Register */
-#define	AT91_ST_IMR		0x1c			/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		0x20			/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		0x24			/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif

arch/arm/mach-exynos/Kconfig

@@ -123,7 +123,7 @@ config SOC_EXYNOS5800
 config EXYNOS5420_MCPM
 	bool "Exynos5420 Multi-Cluster PM support"
 	depends on MCPM && SOC_EXYNOS5420
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	select ARM_CPU_SUSPEND
 	help
 	  This is needed to provide CPU and cluster power management

arch/arm/mach-mediatek/Kconfig

 menuconfig ARCH_MEDIATEK
 	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
 	select ARM_GIC
+	select PINCTRL
 	select MTK_TIMER
 	help
 	  Support for Mediatek MT65xx & MT81xx SoCs

arch/arm/mach-omap2/gpmc-nand.c

@@ -96,14 +96,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
 	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 
-	if (gpmc_t) {
-		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
-		if (err < 0) {
-			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err);
-			return err;
-		}
-	}
-
 	memset(&s, 0, sizeof(struct gpmc_settings));
 	if (gpmc_nand_data->of_node)
 		gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
@@ -111,6 +103,16 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 		gpmc_set_legacy(gpmc_nand_data, &s);
 
 	s.device_nand = true;
+
+	if (gpmc_t) {
+		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
+		if (err < 0) {
+			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
+			       err);
+			return err;
+		}
+	}
+
 	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
 	if (err < 0)
 		goto out_free_cs;

arch/arm/mach-omap2/gpmc-onenand.c

@@ -293,7 +293,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	if (ret < 0)
 		return ret;
 
-	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async);
 	if (ret < 0)
 		return ret;
 
@@ -331,7 +331,7 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 	if (ret < 0)
 		return ret;
 
-	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
+	ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync);
 	if (ret < 0)
 		return ret;
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -71,7 +71,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
 
 	gpmc_calc_timings(&t, &tusb_async, &dev_t);
 
-	return gpmc_cs_set_timings(async_cs, &t);
+	return gpmc_cs_set_timings(async_cs, &t, &tusb_async);
 }
 
 static int tusb_set_sync_mode(unsigned sysclk_ps)
@@ -98,7 +98,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 
 	gpmc_calc_timings(&t, &tusb_sync, &dev_t);
 
-	return gpmc_cs_set_timings(sync_cs, &t);
+	return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync);
 }
 
 /* tusb driver calls this when it changes the chip's clocking */

arch/arm/mach-qcom/Kconfig

@@ -22,7 +22,4 @@ config ARCH_MSM8974
 	bool "Enable support for MSM8974"
 	select HAVE_ARM_ARCH_TIMER
 
-config QCOM_SCM
-	bool
-
 endif

arch/arm/mach-qcom/Makefile

 obj-y			:= board.o
 obj-$(CONFIG_SMP)	+= platsmp.o
-obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)

arch/arm/mach-qcom/platsmp.c

@@ -17,10 +17,10 @@
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/qcom_scm.h>
 
 #include <asm/smp_plat.h>
 
-#include "scm-boot.h"
 
 #define VDD_SC1_ARRAY_CLAMP_GFS_CTL	0x35a0
 #define SCSS_CPU1CORE_RESET		0x2d80
@@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu, map;
-	unsigned int flags = 0;
-	static const int cold_boot_flags[] = {
-		0,
-		SCM_FLAG_COLDBOOT_CPU1,
-		SCM_FLAG_COLDBOOT_CPU2,
-		SCM_FLAG_COLDBOOT_CPU3,
-	};
+	int cpu;
 
-	for_each_present_cpu(cpu) {
-		map = cpu_logical_map(cpu);
-		if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) {
-			set_cpu_present(cpu, false);
-			continue;
-		}
-		flags |= cold_boot_flags[map];
-	}
-
-	if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
+					cpu_present_mask)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;

arch/arm/mach-vexpress/Kconfig

@@ -54,7 +54,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
 config ARCH_VEXPRESS_DCSCB
 	bool "Dual Cluster System Control Block (DCSCB) support"
 	depends on MCPM
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	help
 	  Support for the Dual Cluster System Configuration Block (DCSCB).
 	  This is needed to provide CPU and cluster power management
@@ -72,7 +72,7 @@ config ARCH_VEXPRESS_SPC
 config ARCH_VEXPRESS_TC2_PM
 	bool "Versatile Express TC2 power management"
 	depends on MCPM
-	select ARM_CCI
+	select ARM_CCI400_PORT_CTRL
 	select ARCH_VEXPRESS_SPC
 	select ARM_CPU_SUSPEND
 	help

arch/arm/mach-qcom/scm.h → arch/arm64/include/asm/arm-cci.h

-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/*
+ * arch/arm64/include/asm/arm-cci.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT			0x1
-#define SCM_SVC_PIL			0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-		void *resp_buf, size_t resp_len);
 
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+#ifndef __ASM_ARM_CCI_H
+#define __ASM_ARM_CCI_H
 
-extern u32 scm_get_version(void);
+static inline bool platform_has_secure_cci_access(void)
+{
+	return false;
+}
 
 #endif

drivers/bus/Kconfig

@@ -4,6 +4,41 @@
 
 menu "Bus devices"
 
+config ARM_CCI
+	bool
+
+config ARM_CCI400_COMMON
+	bool
+	select ARM_CCI
+
+config ARM_CCI400_PMU
+	bool "ARM CCI400 PMU support"
+	default y
+	depends on ARM || ARM64
+	depends on HW_PERF_EVENTS
+	select ARM_CCI400_COMMON
+	help
+	  Support for PMU events monitoring on the ARM CCI cache coherent
+	  interconnect.
+
+	  If unsure, say Y
+
+config ARM_CCI400_PORT_CTRL
+	bool
+	depends on ARM && OF && CPU_V7
+	select ARM_CCI400_COMMON
+	help
+	  Low level power management driver for CCI400 cache coherent
+	  interconnect for ARM platforms.
+
+config ARM_CCN
+	bool "ARM CCN driver support"
+	depends on ARM || ARM64
+	depends on PERF_EVENTS
+	help
+	  PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
+	  interconnect.
+
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
 	depends on ARM || MIPS
@@ -40,15 +75,6 @@ config MVEBU_MBUS
 	  Driver needed for the MBus configuration on Marvell EBU SoCs
 	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
 
-config OMAP_OCP2SCP
-	tristate "OMAP OCP2SCP DRIVER"
-	depends on ARCH_OMAP2PLUS
-	help
-	  Driver to enable ocp2scp module which transforms ocp interface
-	  protocol to scp protocol. In OMAP4, USB PHY is connected via
-	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
-	  OCP2SCP.
-
 config OMAP_INTERCONNECT
 	tristate "OMAP INTERCONNECT DRIVER"
 	depends on ARCH_OMAP2PLUS
@@ -56,20 +82,27 @@ config OMAP_INTERCONNECT
 	help
 	  Driver to enable OMAP interconnect error handling driver.
 
-config ARM_CCI
-	bool "ARM CCI driver support"
-	depends on ARM && OF && CPU_V7
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	depends on ARCH_OMAP2PLUS
 	help
-	  Driver supporting the CCI cache coherent interconnect for ARM
-	  platforms.
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
 
-config ARM_CCN
-	bool "ARM CCN driver support"
-	depends on ARM || ARM64
-	depends on PERF_EVENTS
+config SIMPLE_PM_BUS
+	bool "Simple Power-Managed Bus Driver"
+	depends on OF && PM
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
-	  PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
-	  interconnect.
+	  Driver for transparent busses that don't need a real driver, but
+	  where the bus controller is part of a PM domain, or under the control
+	  of a functional clock, and thus relies on runtime PM for managing
+	  this PM domain and/or clock.
+	  An example of such a bus controller is the Renesas Bus State
+	  Controller (BSC, sometimes called "LBSC within Bus Bridge", or
+	  "External Bus Interface") as found on several Renesas ARM SoCs.
 
 config VEXPRESS_CONFIG
 	bool "Versatile Express configuration bus"

drivers/bus/Makefile

@@ -2,17 +2,18 @@
 # Makefile for the bus drivers.
 #
 
+# Interconnect bus drivers for ARM platforms
+obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
+obj-$(CONFIG_ARM_CCN)		+= arm-ccn.o
+
 obj-$(CONFIG_BRCMSTB_GISB_ARB)	+= brcmstb_gisb.o
 obj-$(CONFIG_IMX_WEIM)		+= imx-weim.o
 obj-$(CONFIG_MIPS_CDMM)		+= mips_cdmm.o
 obj-$(CONFIG_MVEBU_MBUS) 	+= mvebu-mbus.o
-obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 
 # Interconnect bus driver for OMAP SoCs.
 obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 
-# Interconnect bus drivers for ARM platforms
-obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
-obj-$(CONFIG_ARM_CCN)		+= arm-ccn.o
-
+obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
+obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o

drivers/bus/simple-pm-bus.c

+/*
+ * Simple Power-Managed Bus Driver
+ *
+ * Copyright (C) 2014-2015 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+
+static int simple_pm_bus_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	pm_runtime_enable(&pdev->dev);
+
+	if (np)
+		of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+	return 0;
+}
+
+static int simple_pm_bus_remove(struct platform_device *pdev)
+{
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static const struct of_device_id simple_pm_bus_of_match[] = {
+	{ .compatible = "simple-pm-bus", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match);
+
+static struct platform_driver simple_pm_bus_driver = {
+	.probe = simple_pm_bus_probe,
+	.remove = simple_pm_bus_remove,
+	.driver = {
+		.name = "simple-pm-bus",
+		.of_match_table = simple_pm_bus_of_match,
+	},
+};
+
+module_platform_driver(simple_pm_bus_driver);
+
+MODULE_DESCRIPTION("Simple Power-Managed Bus Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_LICENSE("GPL v2");

drivers/clocksource/Kconfig

@@ -143,6 +143,11 @@ config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
 
+config ATMEL_ST
+	bool
+	select CLKSRC_OF
+	select MFD_SYSCON
+
 config CLKSRC_METAG_GENERIC
 	def_bool y if METAG
 	help

drivers/clocksource/Makefile

 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_PIT)		+= timer-atmel-pit.o
+obj-$(CONFIG_ATMEL_ST)		+= timer-atmel-st.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o

arch/arm/mach-at91/at91rm9200_time.c → drivers/clocksource/timer-atmel-st.c

@@ -24,19 +24,17 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/export.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/of_irq.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/at91_st.h>
-#include <mach/hardware.h>
+#include <linux/regmap.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
 static struct clock_event_device clkevt;
+static struct regmap *regmap_st;
 
+#define AT91_SLOW_CLOCK		32768
 #define RM9200_TIMER_LATCH	((AT91_SLOW_CLOCK + HZ/2) / HZ)
 
 /*
@@ -46,11 +44,11 @@ static struct clock_event_device clkevt;
  */
 static inline unsigned long read_CRTR(void)
 {
-	unsigned long x1, x2;
+	unsigned int x1, x2;
 
-	x1 = at91_st_read(AT91_ST_CRTR);
+	regmap_read(regmap_st, AT91_ST_CRTR, &x1);
 	do {
-		x2 = at91_st_read(AT91_ST_CRTR);
+		regmap_read(regmap_st, AT91_ST_CRTR, &x2);
 		if (x1 == x2)
 			break;
 		x1 = x2;
@@ -63,7 +61,10 @@ static inline unsigned long read_CRTR(void)
  */
 static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
-	u32	sr = at91_st_read(AT91_ST_SR) & irqmask;
+	u32 sr;
+
+	regmap_read(regmap_st, AT91_ST_SR, &sr);
+	sr &= irqmask;
 
 	/*
 	 * irqs should be disabled here, but as the irq is shared they are only
@@ -92,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static struct irqaction at91rm9200_timer_irq = {
-	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91rm9200_timer_interrupt,
-	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
 static cycle_t read_clk32k(struct clocksource *cs)
 {
 	return read_CRTR();
@@ -115,23 +109,25 @@ static struct clocksource clk32k = {
 static void
 clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
+	unsigned int val;
+
 	/* Disable and flush pending timer interrupts */
-	at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	last_crtr = read_CRTR();
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* PIT for periodic irqs; fixed rate of 1/HZ */
 		irqmask = AT91_ST_PITS;
-		at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
+		regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* ALM for oneshot irqs, set by next_event()
 		 * before 32 seconds have passed
 		 */
 		irqmask = AT91_ST_ALMS;
-		at91_st_write(AT91_ST_RTAR, last_crtr);
+		regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -139,7 +135,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		irqmask = 0;
 		break;
 	}
-	at91_st_write(AT91_ST_IER, irqmask);
+	regmap_write(regmap_st, AT91_ST_IER, irqmask);
 }
 
 static int
@@ -147,6 +143,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
 	u32		alm;
 	int		status = 0;
+	unsigned int	val;
 
 	BUG_ON(delta < 2);
 
@@ -162,12 +159,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm = read_CRTR();
 
 	/* Cancel any pending alarm; flush any pending IRQ */
-	at91_st_write(AT91_ST_RTAR, alm);
-	at91_st_read(AT91_ST_SR);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
 
 	/* Schedule alarm by writing RTAR. */
 	alm += delta;
-	at91_st_write(AT91_ST_RTAR, alm);
+	regmap_write(regmap_st, AT91_ST_RTAR, alm);
 
 	return status;
 }
@@ -180,66 +177,40 @@ static struct clock_event_device clkevt = {
 	.set_mode	= clkevt32k_mode,
 };
 
-void __iomem *at91_st_base;
-EXPORT_SYMBOL_GPL(at91_st_base);
-
-static const struct of_device_id at91rm9200_st_timer_ids[] = {
-	{ .compatible = "atmel,at91rm9200-st" },
-	{ /* sentinel */ }
-};
-
-static int __init of_at91rm9200_st_init(void)
-{
-	struct device_node *np;
-	int ret;
-
-	np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
-	if (!np)
-		goto err;
-
-	at91_st_base = of_iomap(np, 0);
-	if (!at91_st_base)
-		goto node_err;
-
-	/* Get the interrupts property */
-	ret = irq_of_parse_and_map(np, 0);
-	if (!ret)
-		goto ioremap_err;
-	at91rm9200_timer_irq.irq = ret;
-
-	of_node_put(np);
-
-	return 0;
-
-ioremap_err:
-	iounmap(at91_st_base);
-node_err:
-	of_node_put(np);
-err:
-	return -EINVAL;
-}
-
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
-void __init at91rm9200_timer_init(void)
+static void __init atmel_st_timer_init(struct device_node *node)
 {
-	/* For device tree enabled device: initialize here */
-	of_at91rm9200_st_init();
+	unsigned int val;
+	int irq, ret;
+
+	regmap_st = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap_st))
+		panic(pr_fmt("Unable to get regmap\n"));
 
 	/* Disable all timer interrupts, and clear any pending ones */
-	at91_st_write(AT91_ST_IDR,
+	regmap_write(regmap_st, AT91_ST_IDR,
 		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	at91_st_read(AT91_ST_SR);
+	regmap_read(regmap_st, AT91_ST_SR, &val);
+
+	/* Get the interrupts property */
+	irq  = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic(pr_fmt("Unable to get IRQ from DT\n"));
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
+	ret = request_irq(irq, at91rm9200_timer_interrupt,
+			  IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+			  "at91_tick", regmap_st);
+	if (ret)
+		panic(pr_fmt("Unable to setup IRQ\n"));
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting
 	 * its prescaler from the 1 Hz default.
 	 */
-	at91_st_write(AT91_ST_RTMR, 1);
+	regmap_write(regmap_st, AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
 	clkevt.cpumask = cpumask_of(0);
@@ -249,3 +220,5 @@ void __init at91rm9200_timer_init(void)
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
+CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
+		       atmel_st_timer_init);

drivers/firmware/Kconfig

@@ -132,6 +132,10 @@ config ISCSI_IBFT
 	  detect iSCSI boot parameters dynamically during system boot, say Y.
 	  Otherwise, say N.
 
+config QCOM_SCM
+	bool
+	depends on ARM || ARM64
+
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
 

drivers/firmware/Makefile

@@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID)		+= dmi-id.o
 obj-$(CONFIG_ISCSI_IBFT_FIND)	+= iscsi_ibft_find.o
 obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o
+CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
 
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/

drivers/soc/Kconfig

 menu "SOC (System On Chip) specific Drivers"
 
+source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/versatile/Kconfig"

drivers/soc/Makefile

@@ -2,6 +2,7 @@
 # Makefile for the Linux Kernel SOC specific device drivers.
 #
 
+obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_SOC_TI)		+= ti/

drivers/soc/mediatek/Kconfig

+#
+# MediaTek SoC drivers
+#
+config MTK_PMIC_WRAP
+	tristate "MediaTek PMIC Wrapper Support"
+	depends on ARCH_MEDIATEK
+	select REGMAP
+	help
+	  Say yes here to add support for MediaTek PMIC Wrapper found
+	  on different MediaTek SoCs. The PMIC wrapper is a proprietary
+	  hardware to connect the PMIC.

drivers/soc/mediatek/Makefile

+obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o

drivers/soc/qcom/Kconfig

@@ -4,6 +4,7 @@
 config QCOM_GSBI
         tristate "QCOM General Serial Bus Interface"
         depends on ARCH_QCOM
+        select MFD_SYSCON
         help
           Say y here to enable GSBI support.  The GSBI provides control
           functions for connecting the underlying serial UART, SPI, and I2C

drivers/soc/qcom/qcom_gsbi.c

@@ -18,22 +18,129 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
 
 #define GSBI_CTRL_REG		0x0000
 #define GSBI_PROTOCOL_SHIFT	4
+#define MAX_GSBI		12
+
+#define TCSR_ADM_CRCI_BASE	0x70
+
+struct crci_config {
+	u32 num_rows;
+	const u32 (*array)[MAX_GSBI];
+};
+
+static const u32 crci_ipq8064[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_ipq8064 = {
+	.num_rows = ARRAY_SIZE(crci_ipq8064),
+	.array = crci_ipq8064,
+};
+
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
+	{
+		0x001800, 0x006000, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_apq8064 = {
+	.num_rows = ARRAY_SIZE(crci_apq8064),
+	.array = crci_apq8064,
+};
+
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
+	{
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000400, 0x000000, 0x000000,
+		0x000000, 0x000000, 0x000000, 0x000000
+	},
+	{
+		0x000000, 0x000000, 0x000000, 0x000000,
+		0x000000, 0x000020, 0x0000c0, 0x000300,
+		0x001800, 0x006000, 0x000000, 0x000000
+	},
+};
+
+static const struct crci_config config_msm8960 = {
+	.num_rows = ARRAY_SIZE(crci_msm8960),
+	.array = crci_msm8960,
+};
+
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 0 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - A */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+	{	/* ADM 1 - B */
+		0x000003, 0x00000c, 0x000030, 0x0000c0,
+		0x000300, 0x000c00, 0x003000, 0x00c000,
+		0x030000, 0x0c0000, 0x300000, 0xc00000
+	},
+};
+
+static const struct crci_config config_msm8660 = {
+	.num_rows = ARRAY_SIZE(crci_msm8660),
+	.array = crci_msm8660,
+};
 
 struct gsbi_info {
 	struct clk *hclk;
 	u32 mode;
 	u32 crci;
+	struct regmap *tcsr;
+};
+
+static const struct of_device_id tcsr_dt_match[] = {
+	{ .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
+	{ .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
+	{ .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
+	{ .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
+	{ },
 };
 
 static int gsbi_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
+	struct device_node *tcsr_node;
+	const struct of_device_id *match;
 	struct resource *res;
 	void __iomem *base;
 	struct gsbi_info *gsbi;
+	int i;
+	u32 mask, gsbi_num;
+	const struct crci_config *config = NULL;
 
 	gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
 
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_device *pdev)
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
+	/* get the tcsr node and setup the config and regmap */
+	gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
+
+	if (!IS_ERR(gsbi->tcsr)) {
+		tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
+		if (tcsr_node) {
+			match = of_match_node(tcsr_dt_match, tcsr_node);
+			if (match)
+				config = match->data;
+			else
+				dev_warn(&pdev->dev, "no matching TCSR\n");
+
+			of_node_put(tcsr_node);
+		}
+	}
+
+	if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
+		dev_err(&pdev->dev, "missing cell-index\n");
+		return -EINVAL;
+	}
+
+	if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
+		dev_err(&pdev->dev, "invalid cell-index\n");
+		return -EINVAL;
+	}
+
 	if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
 		dev_err(&pdev->dev, "missing mode configuration\n");
 		return -EINVAL;
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_device *pdev)
 	writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
 				base + GSBI_CTRL_REG);
 
+	/*
+	 * modify tcsr to reflect mode and ADM CRCI mux
+	 * Each gsbi contains a pair of bits, one for RX and one for TX
+	 * SPI mode requires both bits cleared, otherwise they are set
+	 */
+	if (config) {
+		for (i = 0; i < config->num_rows; i++) {
+			mask = config->array[i][gsbi_num - 1];
+
+			if (gsbi->mode == GSBI_PROT_SPI)
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
+			else
+				regmap_update_bits(gsbi->tcsr,
+					TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
+
+		}
+	}
+
 	/* make sure the gsbi control write is not reordered */
 	wmb();
 

drivers/watchdog/Kconfig

@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
 
 config AT91RM9200_WATCHDOG
 	tristate "AT91RM9200 watchdog"
-	depends on SOC_AT91RM9200
+	depends on SOC_AT91RM9200 && MFD_SYSCON
 	help
 	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
 	  system when the timeout is reached.

drivers/watchdog/at91rm9200_wdt.c

@@ -12,27 +12,32 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <mach/at91_st.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
 #define WDT_MAX_TIME		256	/* seconds */
 
 static int wdt_time = WDT_DEFAULT_TIME;
 static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
 
 module_param(wdt_time, int, 0);
 MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -50,12 +55,33 @@ static unsigned long at91wdt_busy;
 
 /* ......................................................................... */
 
+static int at91rm9200_restart(struct notifier_block *this,
+					unsigned long mode, void *cmd)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	regmap_write(regmap_st, AT91_ST_WDMR,
+		     AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+
+	mdelay(2000);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block at91rm9200_restart_nb = {
+	.notifier_call = at91rm9200_restart,
+	.priority = 192,
+};
+
 /*
  * Disable the watchdog.
  */
 static inline void at91_wdt_stop(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
 }
 
 /*
@@ -63,9 +89,9 @@ static inline void at91_wdt_stop(void)
  */
 static inline void at91_wdt_start(void)
 {
-	at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
 				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /*
@@ -73,7 +99,7 @@ static inline void at91_wdt_start(void)
  */
 static inline void at91_wdt_reload(void)
 {
-	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* ......................................................................... */
@@ -203,16 +229,32 @@ static struct miscdevice at91wdt_miscdev = {
 
 static int at91wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
+	struct device *parent;
 	int res;
 
 	if (at91wdt_miscdev.parent)
 		return -EBUSY;
 	at91wdt_miscdev.parent = &pdev->dev;
 
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (!regmap_st)
+		return -ENODEV;
+
 	res = misc_register(&at91wdt_miscdev);
 	if (res)
 		return res;
 
+	res = register_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to register restart handler\n");
+
 	pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n",
 		wdt_time, nowayout ? ", nowayout" : "");
 	return 0;
@@ -220,8 +262,13 @@ static int at91wdt_probe(struct platform_device *pdev)
 
 static int at91wdt_remove(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	int res;
 
+	res = unregister_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to unregister restart handler\n");
+
 	res = misc_deregister(&at91wdt_miscdev);
 	if (!res)
 		at91wdt_miscdev.parent = NULL;
@@ -267,7 +314,7 @@ static struct platform_driver at91wdt_driver = {
 	.suspend	= at91wdt_suspend,
 	.resume		= at91wdt_resume,
 	.driver		= {
-		.name	= "at91_wdt",
+		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
 	},
 };
@@ -296,4 +343,4 @@ module_exit(at91_wdt_exit);
 MODULE_AUTHOR("Andrew Victor");
 MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");

include/linux/arm-cci.h

@@ -24,16 +24,22 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 
+#include <asm/arm-cci.h>
+
 struct device_node;
 
 #ifdef CONFIG_ARM_CCI
 extern bool cci_probed(void);
+#else
+static inline bool cci_probed(void) { return false; }
+#endif
+
+#ifdef CONFIG_ARM_CCI400_PORT_CTRL
 extern int cci_ace_get_port(struct device_node *dn);
 extern int cci_disable_port_by_cpu(u64 mpidr);
 extern int __cci_control_port_by_device(struct device_node *dn, bool enable);
 extern int __cci_control_port_by_index(u32 port, bool enable);
 #else
-static inline bool cci_probed(void) { return false; }
 static inline int cci_ace_get_port(struct device_node *dn)
 {
 	return -ENODEV;
@@ -49,6 +55,7 @@ static inline int __cci_control_port_by_index(u32 port, bool enable)
 	return -ENODEV;
 }
 #endif
+
 #define cci_disable_port_by_device(dev) \
 	__cci_control_port_by_device(dev, false)
 #define cci_enable_port_by_device(dev) \

include/linux/mfd/syscon/atmel-st.h

+/*
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H
+#define _LINUX_MFD_SYSCON_ATMEL_ST_H
+
+#include <linux/bitops.h>
+
+#define AT91_ST_CR	0x00	/* Control Register */
+#define		AT91_ST_WDRST	BIT(0)	/* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR	0x04	/* Period Interval Mode Register */
+#define		AT91_ST_PIV	0xffff	/* Period Interval Value */
+
+#define AT91_ST_WDMR	0x08	/* Watchdog Mode Register */
+#define		AT91_ST_WDV	0xffff	/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN	BIT(16)	/* Reset Enable */
+#define		AT91_ST_EXTEN	BIT(17)	/* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR	0x0c	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES	0xffff	/* Real-time Prescalar Value */
+
+#define AT91_ST_SR	0x10	/* Status Register */
+#define		AT91_ST_PITS	BIT(0)	/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF	BIT(1)	/* Watchdog Overflow */
+#define		AT91_ST_RTTINC	BIT(2)	/* Real-time Timer Increment */
+#define		AT91_ST_ALMS	BIT(3)	/* Alarm Status */
+
+#define AT91_ST_IER	0x14	/* Interrupt Enable Register */
+#define AT91_ST_IDR	0x18	/* Interrupt Disable Register */
+#define AT91_ST_IMR	0x1c	/* Interrupt Mask Register */
+
+#define AT91_ST_RTAR	0x20	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV	0xfffff	/* Alarm Value */
+
+#define AT91_ST_CRTR	0x24	/* Current Real-time Register */
+#define		AT91_ST_CRTV	0xfffff	/* Current Real-Time Value */
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */

include/linux/omap-gpmc.h

@@ -163,7 +163,8 @@ extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
+			       const struct gpmc_settings *s);
 extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);

arch/arm/mach-qcom/scm-boot.h → include/linux/qcom_scm.h

-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -9,18 +10,19 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
+#ifndef __QCOM_SCM_H
+#define __QCOM_SCM_H
 
-#define SCM_BOOT_ADDR			0x1
-#define SCM_FLAG_COLDBOOT_CPU1		0x01
-#define SCM_FLAG_COLDBOOT_CPU2		0x08
-#define SCM_FLAG_COLDBOOT_CPU3		0x20
-#define SCM_FLAG_WARMBOOT_CPU0		0x04
-#define SCM_FLAG_WARMBOOT_CPU1		0x02
-#define SCM_FLAG_WARMBOOT_CPU2		0x10
-#define SCM_FLAG_WARMBOOT_CPU3		0x40
+extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
 
-int scm_set_boot_addr(u32 addr, int flags);
+#define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
+#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1
+
+extern void qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 qcom_scm_get_version(void);
 
 #endif