staging: comedi: ni_daq_700: use comedi_pcmcia_{enable, disable}

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver does not use interrupts and is not an audio device,
remove CONF_ENABLE_IRQ and CONF_AUTO_AUDIO from the link->config_flags.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_daq_700.c

@@ -195,15 +195,6 @@ static void daq700_ai_config(struct comedi_device *dev,
 	inw(iobase + ADFIFO_R);		/* read 16bit junk from FIFO to clear */
 }
 
-static int daq700_pcmcia_config_loop(struct pcmcia_device *p_dev,
-				     void *priv_data)
-{
-	if (p_dev->config_index == 0)
-		return -EINVAL;
-
-	return pcmcia_request_io(p_dev);
-}
-
 static int daq700_auto_attach(struct comedi_device *dev,
 			      unsigned long context)
 {
@@ -213,14 +204,8 @@ static int daq700_auto_attach(struct comedi_device *dev,
 
 	dev->board_name = dev->driver->driver_name;
 
-	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO |
-			      CONF_AUTO_SET_IO;
-
-	ret = pcmcia_loop_config(link, daq700_pcmcia_config_loop, NULL);
-	if (ret)
-		return ret;
-
-	ret = pcmcia_enable_device(link);
+	link->config_flags |= CONF_AUTO_SET_IO;
+	ret = comedi_pcmcia_enable(dev);
 	if (ret)
 		return ret;
 	dev->iobase = link->resource[0]->start;
@@ -262,10 +247,7 @@ static int daq700_auto_attach(struct comedi_device *dev,
 
 static void daq700_detach(struct comedi_device *dev)
 {
-	struct pcmcia_device *link = comedi_to_pcmcia_dev(dev);
-
-	if (dev->iobase)
-		pcmcia_disable_device(link);
+	comedi_pcmcia_disable(dev);
 }
 
 static struct comedi_driver daq700_driver = {