Commit 7e6313a2 authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Jani Nikula

drm/i915: Don't use link_bw for PLL setup

Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.

v2: Fix typo in commit message (Sivakumar)
Reviewed-by: default avatarSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 69f92f67
......@@ -1554,17 +1554,14 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
wrpll_params.central_freq;
} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
struct drm_encoder *encoder = &intel_encoder->base;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
switch (crtc_state->port_clock / 2) {
case 81000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
break;
case DP_LINK_BW_2_7:
case 135000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
break;
case DP_LINK_BW_5_4:
case 270000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
break;
}
......
......@@ -48,28 +48,28 @@
#define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
struct dp_link_dpll {
int link_bw;
int clock;
struct dpll dpll;
};
static const struct dp_link_dpll gen4_dpll[] = {
{ DP_LINK_BW_1_62,
{ 162000,
{ .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
{ DP_LINK_BW_2_7,
{ 270000,
{ .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
};
static const struct dp_link_dpll pch_dpll[] = {
{ DP_LINK_BW_1_62,
{ 162000,
{ .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
{ DP_LINK_BW_2_7,
{ 270000,
{ .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
};
static const struct dp_link_dpll vlv_dpll[] = {
{ DP_LINK_BW_1_62,
{ 162000,
{ .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
{ DP_LINK_BW_2_7,
{ 270000,
{ .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
};
......@@ -83,11 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
* m2 is stored in fixed point format using formula below
* (m2_int << 22) | m2_fraction
*/
{ DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */
{ 162000, /* m2_int = 32, m2_fraction = 1677722 */
{ .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
{ DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */
{ 270000, /* m2_int = 27, m2_fraction = 0 */
{ .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
{ DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
{ 540000, /* m2_int = 27, m2_fraction = 0 */
{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
};
......@@ -1130,7 +1130,7 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
}
static void
skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
{
u32 ctrl1;
......@@ -1142,7 +1142,7 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
pipe_config->dpll_hw_state.cfgcr2 = 0;
ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
switch (link_clock / 2) {
switch (pipe_config->port_clock / 2) {
case 81000:
ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
SKL_DPLL0);
......@@ -1176,19 +1176,19 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
}
static void
hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config)
{
memset(&pipe_config->dpll_hw_state, 0,
sizeof(pipe_config->dpll_hw_state));
switch (link_bw) {
case DP_LINK_BW_1_62:
switch (pipe_config->port_clock / 2) {
case 81000:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
case 135000:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
case 270000:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
}
......@@ -1245,7 +1245,7 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config, int link_bw)
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
const struct dp_link_dpll *divisor = NULL;
......@@ -1267,7 +1267,7 @@ intel_dp_set_clock(struct intel_encoder *encoder,
if (divisor && count) {
for (i = 0; i < count; i++) {
if (link_bw == divisor[i].link_bw) {
if (pipe_config->port_clock == divisor[i].clock) {
pipe_config->dpll = divisor[i].dpll;
pipe_config->clock_set = true;
break;
......@@ -1544,13 +1544,13 @@ intel_dp_compute_config(struct intel_encoder *encoder,
}
if (IS_SKYLAKE(dev) && is_edp(intel_dp))
skl_edp_set_pll_config(pipe_config, common_rates[clock]);
skl_edp_set_pll_config(pipe_config);
else if (IS_BROXTON(dev))
/* handled in ddi */;
else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
hsw_dp_set_ddi_pll_sel(pipe_config);
else
intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
intel_dp_set_clock(encoder, pipe_config);
return true;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment