Merge tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

@@ -42,6 +42,7 @@ properties:
       - focaltech,ft5426
       - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8201
       - focaltech,ft8719
 
   reg:

drivers/input/joystick/adc-joystick.c

@@ -182,8 +182,11 @@ static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
 			swap(range[0], range[1]);
 		}
 
-		fwnode_property_read_u32(child, "abs-fuzz", &fuzz);
-		fwnode_property_read_u32(child, "abs-flat", &flat);
+		if (fwnode_property_read_u32(child, "abs-fuzz", &fuzz))
+			fuzz = 0;
+
+		if (fwnode_property_read_u32(child, "abs-flat", &flat))
+			flat = 0;
 
 		input_set_abs_params(joy->input, axes[i].code,
 				     range[0], range[1], fuzz, flat);

drivers/input/misc/uinput.c

@@ -417,6 +417,20 @@ static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code,
 		return -EINVAL;
 	}
 
+	/*
+	 * Limit number of contacts to a reasonable value (100). This
+	 * ensures that we need less than 2 pages for struct input_mt
+	 * (we are not using in-kernel slot assignment so not going to
+	 * allocate memory for the "red" table), and we should have no
+	 * trouble getting this much memory.
+	 */
+	if (code == ABS_MT_SLOT && max > 99) {
+		printk(KERN_DEBUG
+		       "%s: unreasonably large number of slots requested: %d\n",
+		       UINPUT_NAME, max);
+		return -EINVAL;
+	}
+
 	return 0;
 }
 

drivers/input/mouse/synaptics.c

@@ -189,6 +189,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN2054", /* E480 */
 	"LEN2055", /* E580 */
 	"LEN2068", /* T14 Gen 1 */
+	"SYN3015", /* HP EliteBook 840 G2 */
 	"SYN3052", /* HP EliteBook 840 G4 */
 	"SYN3221", /* HP 15-ay000 */
 	"SYN323d", /* HP Spectre X360 13-w013dx */

drivers/input/serio/i8042-acpipnpio.h

@@ -83,6 +83,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_KBDRESET		BIT(12)
 #define SERIO_QUIRK_DRITEK		BIT(13)
 #define SERIO_QUIRK_NOPNP		BIT(14)
+#define SERIO_QUIRK_FORCENORESTORE	BIT(15)
 
 /* Quirk table for different mainboards. Options similar or identical to i8042
  * module parameters.
@@ -626,6 +627,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
 	},
+	{
+		/* Fujitsu Lifebook E756 */
+		/* https://bugzilla.suse.com/show_bug.cgi?id=1229056 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E756"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOMUX)
+	},
 	{
 		/* Fujitsu Lifebook E5411 */
 		.matches = {
@@ -1149,18 +1159,10 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
 	{
-		/*
-		 * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
-		 * the keyboard very laggy for ~5 seconds after boot and
-		 * sometimes also after resume.
-		 * However both are required for the keyboard to not fail
-		 * completely sometimes after boot or resume.
-		 */
 		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "N150CU"),
 		},
-		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
-					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+		.driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
 	},
 	{
 		.matches = {
@@ -1685,6 +1687,8 @@ static void __init i8042_check_quirks(void)
 	if (quirks & SERIO_QUIRK_NOPNP)
 		i8042_nopnp = true;
 #endif
+	if (quirks & SERIO_QUIRK_FORCENORESTORE)
+		i8042_forcenorestore = true;
 }
 #else
 static inline void i8042_check_quirks(void) {}
@@ -1718,7 +1722,7 @@ static int __init i8042_platform_init(void)
 
 	i8042_check_quirks();
 
-	pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+	pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
 		i8042_nokbd ? " nokbd" : "",
 		i8042_noaux ? " noaux" : "",
 		i8042_nomux ? " nomux" : "",
@@ -1738,10 +1742,11 @@ static int __init i8042_platform_init(void)
 		"",
 #endif
 #ifdef CONFIG_PNP
-		i8042_nopnp ? " nopnp" : "");
+		i8042_nopnp ? " nopnp" : "",
 #else
-		"");
+		"",
 #endif
+		i8042_forcenorestore ? " forcenorestore" : "");
 
 	retval = i8042_pnp_init();
 	if (retval)

drivers/input/serio/i8042.c

@@ -115,6 +115,10 @@ module_param_named(nopnp, i8042_nopnp, bool, 0);
 MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
 #endif
 
+static bool i8042_forcenorestore;
+module_param_named(forcenorestore, i8042_forcenorestore, bool, 0);
+MODULE_PARM_DESC(forcenorestore, "Force no restore on s3 resume, copying s2idle behaviour");
+
 #define DEBUG
 #ifdef DEBUG
 static bool i8042_debug;
@@ -1232,7 +1236,7 @@ static int i8042_pm_suspend(struct device *dev)
 {
 	int i;
 
-	if (pm_suspend_via_firmware())
+	if (!i8042_forcenorestore && pm_suspend_via_firmware())
 		i8042_controller_reset(true);
 
 	/* Set up serio interrupts for system wakeup. */
@@ -1248,7 +1252,7 @@ static int i8042_pm_suspend(struct device *dev)
 
 static int i8042_pm_resume_noirq(struct device *dev)
 {
-	if (!pm_resume_via_firmware())
+	if (i8042_forcenorestore || !pm_resume_via_firmware())
 		i8042_interrupt(0, NULL);
 
 	return 0;
@@ -1271,7 +1275,7 @@ static int i8042_pm_resume(struct device *dev)
 	 * not restore the controller state to whatever it had been at boot
 	 * time, so we do not need to do anything.
 	 */
-	if (!pm_suspend_via_firmware())
+	if (i8042_forcenorestore || !pm_suspend_via_firmware())
 		return 0;
 
 	/*

drivers/input/touchscreen/ads7846.c

@@ -824,7 +824,7 @@ static void ads7846_read_state(struct ads7846 *ts)
 		m = &ts->msg[msg_idx];
 		error = spi_sync(ts->spi, m);
 		if (error) {
-			dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
+			dev_err_ratelimited(&ts->spi->dev, "spi_sync --> %d\n", error);
 			packet->ignore = true;
 			return;
 		}

drivers/input/touchscreen/edt-ft5x06.c

@@ -1474,6 +1474,10 @@ static const struct edt_i2c_chip_data edt_ft6236_data = {
 	.max_support_points = 2,
 };
 
+static const struct edt_i2c_chip_data edt_ft8201_data = {
+	.max_support_points = 10,
+};
+
 static const struct edt_i2c_chip_data edt_ft8719_data = {
 	.max_support_points = 10,
 };
@@ -1485,6 +1489,7 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "ft5452", .driver_data = (long)&edt_ft5452_data },
 	/* Note no edt- prefix for compatibility with the ft6236.c driver */
 	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
+	{ .name = "ft8201", .driver_data = (long)&edt_ft8201_data },
 	{ .name = "ft8719", .driver_data = (long)&edt_ft8719_data },
 	{ /* sentinel */ }
 };
@@ -1500,6 +1505,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "focaltech,ft5452", .data = &edt_ft5452_data },
 	/* Note focaltech vendor prefix for compatibility with ft6236.c */
 	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
+	{ .compatible = "focaltech,ft8201", .data = &edt_ft8201_data },
 	{ .compatible = "focaltech,ft8719", .data = &edt_ft8719_data },
 	{ /* sentinel */ }
 };

drivers/input/touchscreen/himax_hx83112b.c

@@ -130,17 +130,6 @@ static int himax_bus_read(struct himax_ts_data *ts, u32 address, void *dst,
 	return 0;
 }
 
-static int himax_read_mcu(struct himax_ts_data *ts, u32 address, u32 *dst)
-{
-	int error;
-
-	error = himax_bus_read(ts, address, dst, sizeof(dst));
-	if (error)
-		return error;
-
-	return 0;
-}
-
 static void himax_reset(struct himax_ts_data *ts)
 {
 	gpiod_set_value_cansleep(ts->gpiod_rst, 1);
@@ -160,7 +149,8 @@ static int himax_read_product_id(struct himax_ts_data *ts, u32 *product_id)
 {
 	int error;
 
-	error = himax_read_mcu(ts, HIMAX_REG_ADDR_ICID, product_id);
+	error = himax_bus_read(ts, HIMAX_REG_ADDR_ICID, product_id,
+			       sizeof(*product_id));
 	if (error)
 		return error;