ppc/sandpoint: remove ppc_ide_md hooks

* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-Sandpoint platform
  to sl82c105 host driver.

* Disable ide_generic host driver in arch/ppc/configs/sandpoint_defconfig
  and enable sl82c105 one.

* Remove ppc_ide_md hooks from arch/ppc/platforms/sandpoint.c - no need for
  them (sl82c105 host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include.

* Also update arch/ppc/platforms/sandpoint.h.

Unfortunately (unlike lopec's case) sl82c105 host driver was not enabled
in defconfing so there is a funcionality change.

[ Not a big deal since sl82c105 is superior over ide_generic. ]

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 5510b125
...@@ -189,7 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y ...@@ -189,7 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y
# #
# IDE chipset support/bugfixes # IDE chipset support/bugfixes
# #
CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_IDEPCI is not set # CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set # CONFIG_IDEDMA_AUTO is not set
......
...@@ -71,7 +71,6 @@ ...@@ -71,7 +71,6 @@
#include <linux/initrd.h> #include <linux/initrd.h>
#include <linux/console.h> #include <linux/console.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/ide.h>
#include <linux/seq_file.h> #include <linux/seq_file.h>
#include <linux/root_dev.h> #include <linux/root_dev.h>
#include <linux/serial.h> #include <linux/serial.h>
...@@ -559,93 +558,6 @@ sandpoint_show_cpuinfo(struct seq_file *m) ...@@ -559,93 +558,6 @@ sandpoint_show_cpuinfo(struct seq_file *m)
return 0; return 0;
} }
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
/*
* IDE support.
*/
static int sandpoint_ide_ports_known = 0;
static unsigned long sandpoint_ide_regbase[MAX_HWIFS];
static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS];
static unsigned long sandpoint_idedma_regbase;
static void
sandpoint_ide_probe(void)
{
struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
PCI_DEVICE_ID_WINBOND_82C105, NULL);
if (pdev) {
sandpoint_ide_regbase[0]=pdev->resource[0].start;
sandpoint_ide_regbase[1]=pdev->resource[2].start;
sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
sandpoint_idedma_regbase=pdev->resource[4].start;
pci_dev_put(pdev);
}
sandpoint_ide_ports_known = 1;
}
static int
sandpoint_ide_default_irq(unsigned long base)
{
if (sandpoint_ide_ports_known == 0)
sandpoint_ide_probe();
if (base == sandpoint_ide_regbase[0])
return SANDPOINT_IDE_INT0;
else if (base == sandpoint_ide_regbase[1])
return SANDPOINT_IDE_INT1;
else
return 0;
}
static unsigned long
sandpoint_ide_default_io_base(int index)
{
if (sandpoint_ide_ports_known == 0)
sandpoint_ide_probe();
return sandpoint_ide_regbase[index];
}
static void __init
sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
unsigned long ctrl_port, int *irq)
{
unsigned long reg = data_port;
uint alt_status_base;
int i;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hw->io_ports[i] = reg++;
}
if (data_port == sandpoint_ide_regbase[0]) {
alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
hw->irq = 14;
}
else if (data_port == sandpoint_ide_regbase[1]) {
alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
hw->irq = 15;
}
else {
alt_status_base = 0;
hw->irq = 0;
}
if (ctrl_port) {
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
} else {
hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
}
if (irq != NULL) {
*irq = hw->irq;
}
}
#endif
/* /*
* Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
*/ */
...@@ -736,10 +648,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ...@@ -736,10 +648,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
#ifdef CONFIG_SERIAL_TEXT_DEBUG #ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress; ppc_md.progress = gen550_progress;
#endif #endif
#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
ppc_ide_md.default_irq = sandpoint_ide_default_irq;
ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
#endif
} }
...@@ -28,9 +28,6 @@ ...@@ -28,9 +28,6 @@
*/ */
#define SANDPOINT_IDE_INT0 23 /* EPIC 7 */ #define SANDPOINT_IDE_INT0 23 /* EPIC 7 */
#define SANDPOINT_IDE_INT1 24 /* EPIC 8 */ #define SANDPOINT_IDE_INT1 24 /* EPIC 8 */
#else
#define SANDPOINT_IDE_INT0 14 /* 8259 Test */
#define SANDPOINT_IDE_INT1 15 /* 8259 Test */
#endif #endif
/* /*
......
...@@ -329,7 +329,7 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = { ...@@ -329,7 +329,7 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = {
.host_flags = IDE_HFLAG_IO_32BIT | .host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_UNMASK_IRQS | IDE_HFLAG_UNMASK_IRQS |
/* FIXME: check for Compatibility mode in generic IDE PCI code */ /* FIXME: check for Compatibility mode in generic IDE PCI code */
#ifdef CONFIG_LOPEC #if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
IDE_HFLAG_FORCE_LEGACY_IRQS | IDE_HFLAG_FORCE_LEGACY_IRQS |
#endif #endif
IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_NO_AUTODMA |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment