Commit 7f5d114c authored by Ralf Bächle's avatar Ralf Bächle Committed by Linus Torvalds

[PATCH] mips: DECstation updates

Update DECstation code.  This still isn't usable but updates the code from
rotten to less rotten and most importantly eleminates the diff between
kernel.org and linux-mips.org tree to easy future work.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent c520e749
......@@ -149,6 +149,7 @@ config MIPS_COBALT
config MACH_DECSTATION
bool "Support for DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
depends on MIPS32 || EXPERIMENTAL
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:11:58 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:03 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -85,6 +85,7 @@ CONFIG_MACH_DECSTATION=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
......@@ -92,7 +93,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=4
# CONFIG_FB is not set
#
# CPU selection
......@@ -128,6 +128,19 @@ CONFIG_CPU_HAS_WB=y
CONFIG_TC=y
CONFIG_MMU=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
#
# PCI Hotplug Support
#
#
# Executable file formats
#
......@@ -144,6 +157,7 @@ CONFIG_TRAD_SIGNALS=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
......@@ -163,9 +177,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -179,6 +195,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -212,6 +229,7 @@ CONFIG_SCSI_CONSTANTS=y
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
......@@ -219,7 +237,6 @@ CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_DECNCR=y
# CONFIG_SCSI_DECSII is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_DEBUG is not set
#
......@@ -382,6 +399,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -434,7 +452,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
......@@ -465,12 +482,14 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -483,11 +502,25 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -589,6 +622,11 @@ CONFIG_ULTRIX_PARTITION=y
#
# CONFIG_NLS is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -608,6 +646,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
/*
* arch/mips/dec/decstation.c
*/
#include <linux/config.h>
#define RELOC
#define INITRD
......
......@@ -21,7 +21,7 @@
#include <asm/dec/ioasic_ints.h>
static spinlock_t ioasic_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_SPINLOCK(ioasic_lock);
static int ioasic_irq_base;
......
......@@ -29,7 +29,7 @@
* There is no default value -- it has to be initialized.
*/
u32 cached_kn02_csr;
spinlock_t kn02_lock = SPIN_LOCK_UNLOCKED;
DEFINE_SPINLOCK(kn02_lock);
static int kn02_irq_base;
......
......@@ -8,7 +8,6 @@
* Copyright (C) 1998 Harald Koerfgen
* Copyright (C) 2000, 2001, 2002, 2003 Maciej W. Rozycki
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/param.h>
......
......@@ -1014,29 +1014,35 @@ config FB_HIT
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
config FB_PMAG_AA
bool "PMAG-AA TURBOchannel framebuffer support"
depends on FB && MACH_DECSTATION && TC
help
Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
used mainly in the MIPS-based DECstation series.
config FB_PMAG_BA
bool "PMAG-BA TURBOchannel framebuffer support"
depends on FB && DECSTATION && TC
depends on FB && MACH_DECSTATION && TC
help
Say Y here to directly support the on-board PMAG-BA framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
to Linux on DECstations at <http://decstation.unix-ag.org/>.
Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
bool "PMAGB-B TURBOchannel framebuffer spport"
depends on FB && DECSTATION && TC
bool "PMAGB-B TURBOchannel framebuffer support"
depends on FB && MACH_DECSTATION && TC
help
Say Y here to directly support the on-board PMAGB-B framebuffer in
the 5000/1xx versions of the DECstation. There is a page dedicated
to Linux on DECstations at <http://decstation.unix-ag.org/>.
Support for the PMAGB-B TURBOchannel framebuffer card used mainly
in the MIPS-based DECstation series. The card is currently only
supported in 1280x1024x8 mode.
config FB_MAXINE
bool "Maxine (Personal DECstation) onboard framebuffer spport"
depends on FB && DECSTATION && TC
bool "Maxine (Personal DECstation) onboard framebuffer support"
depends on FB && MACH_DECSTATION && TC
help
Say Y here to directly support the on-board framebuffer in the
Maxine (5000/20, /25, /33) version of the DECstation. There is a
page dedicated to Linux on DECstations at <http://decstation.unix-ag.org/>.
Support for the onboard framebuffer (1024x768x8) in the Personal
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
config FB_TX3912
bool "TMPTX3912/PR31700 frame buffer support"
......
......@@ -85,9 +85,6 @@ obj-$(CONFIG_FB_HIT) += hitfb.o cfbfillrect.o cfbimgblt.o
obj-$(CONFIG_FB_TX3912) += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_68328) += 68328fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
......@@ -97,6 +94,10 @@ obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgbl
obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
obj-$(CONFIG_FB_W100) += w100fb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_MAXINE) += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
# Platform or fallback drivers go here
obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
......
/*
* linux/drivers/video/bt431.h
*
* Copyright 2003 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*/
#include <linux/types.h>
#include <asm/system.h>
/*
* Bt431 cursor generator registers, 32-bit aligned.
* Two twin Bt431 are used on the DECstation's PMAG-AA.
*/
struct bt431_regs {
volatile u16 addr_lo;
u16 pad0;
volatile u16 addr_hi;
u16 pad1;
volatile u16 addr_cmap;
u16 pad2;
volatile u16 addr_reg;
u16 pad3;
};
static inline u16 bt431_set_value(u8 val)
{
return ((val << 8) | (val & 0xff)) & 0xffff;
}
static inline u8 bt431_get_value(u16 val)
{
return val & 0xff;
}
/*
* Additional registers addressed indirectly.
*/
#define BT431_REG_CMD 0x0000
#define BT431_REG_CXLO 0x0001
#define BT431_REG_CXHI 0x0002
#define BT431_REG_CYLO 0x0003
#define BT431_REG_CYHI 0x0004
#define BT431_REG_WXLO 0x0005
#define BT431_REG_WXHI 0x0006
#define BT431_REG_WYLO 0x0007
#define BT431_REG_WYHI 0x0008
#define BT431_REG_WWLO 0x0009
#define BT431_REG_WWHI 0x000a
#define BT431_REG_WHLO 0x000b
#define BT431_REG_WHHI 0x000c
#define BT431_REG_CRAM_BASE 0x0000
#define BT431_REG_CRAM_END 0x01ff
/*
* Command register.
*/
#define BT431_CMD_CURS_ENABLE 0x40
#define BT431_CMD_XHAIR_ENABLE 0x20
#define BT431_CMD_OR_CURSORS 0x10
#define BT431_CMD_AND_CURSORS 0x00
#define BT431_CMD_1_1_MUX 0x00
#define BT431_CMD_4_1_MUX 0x04
#define BT431_CMD_5_1_MUX 0x08
#define BT431_CMD_xxx_MUX 0x0c
#define BT431_CMD_THICK_1 0x00
#define BT431_CMD_THICK_3 0x01
#define BT431_CMD_THICK_5 0x02
#define BT431_CMD_THICK_7 0x03
static inline void bt431_select_reg(struct bt431_regs *regs, int ir)
{
/*
* The compiler splits the write in two bytes without these
* helper variables.
*/
volatile u16 *lo = &(regs->addr_lo);
volatile u16 *hi = &(regs->addr_hi);
mb();
*lo = bt431_set_value(ir & 0xff);
wmb();
*hi = bt431_set_value((ir >> 8) & 0xff);
}
/* Autoincrement read/write. */
static inline u8 bt431_read_reg_inc(struct bt431_regs *regs)
{
/*
* The compiler splits the write in two bytes without the
* helper variable.
*/
volatile u16 *r = &(regs->addr_reg);
mb();
return bt431_get_value(*r);
}
static inline void bt431_write_reg_inc(struct bt431_regs *regs, u8 value)
{
/*
* The compiler splits the write in two bytes without the
* helper variable.
*/
volatile u16 *r = &(regs->addr_reg);
mb();
*r = bt431_set_value(value);
}
static inline u8 bt431_read_reg(struct bt431_regs *regs, int ir)
{
bt431_select_reg(regs, ir);
return bt431_read_reg_inc(regs);
}
static inline void bt431_write_reg(struct bt431_regs *regs, int ir, u8 value)
{
bt431_select_reg(regs, ir);
bt431_write_reg_inc(regs, value);
}
/* Autoincremented read/write for the cursor map. */
static inline u16 bt431_read_cmap_inc(struct bt431_regs *regs)
{
/*
* The compiler splits the write in two bytes without the
* helper variable.
*/
volatile u16 *r = &(regs->addr_cmap);
mb();
return *r;
}
static inline void bt431_write_cmap_inc(struct bt431_regs *regs, u16 value)
{
/*
* The compiler splits the write in two bytes without the
* helper variable.
*/
volatile u16 *r = &(regs->addr_cmap);
mb();
*r = value;
}
static inline u16 bt431_read_cmap(struct bt431_regs *regs, int cr)
{
bt431_select_reg(regs, cr);
return bt431_read_cmap_inc(regs);
}
static inline void bt431_write_cmap(struct bt431_regs *regs, int cr, u16 value)
{
bt431_select_reg(regs, cr);
bt431_write_cmap_inc(regs, value);
}
static inline void bt431_enable_cursor(struct bt431_regs *regs)
{
bt431_write_reg(regs, BT431_REG_CMD,
BT431_CMD_CURS_ENABLE | BT431_CMD_OR_CURSORS
| BT431_CMD_4_1_MUX | BT431_CMD_THICK_1);
}
static inline void bt431_erase_cursor(struct bt431_regs *regs)
{
bt431_write_reg(regs, BT431_REG_CMD, BT431_CMD_4_1_MUX);
}
static inline void bt431_position_cursor(struct bt431_regs *regs, u16 x, u16 y)
{
/*
* Magic from the MACH sources.
*
* Cx = x + D + H - P
* P = 37 if 1:1, 52 if 4:1, 57 if 5:1
* D = pixel skew between outdata and external data
* H = pixels between HSYNCH falling and active video
*
* Cy = y + V - 32
* V = scanlines between HSYNCH falling, two or more
* clocks after VSYNCH falling, and active video
*/
x += 412 - 52;
y += 68 - 32;
/* Use autoincrement. */
bt431_select_reg(regs, BT431_REG_CXLO);
bt431_write_reg_inc(regs, x & 0xff); /* BT431_REG_CXLO */
bt431_write_reg_inc(regs, (x >> 8) & 0x0f); /* BT431_REG_CXHI */
bt431_write_reg_inc(regs, y & 0xff); /* BT431_REG_CYLO */
bt431_write_reg_inc(regs, (y >> 8) & 0x0f); /* BT431_REG_CYHI */
}
static inline void bt431_set_font(struct bt431_regs *regs, u8 fgc,
u16 width, u16 height)
{
int i;
u16 fgp = fgc ? 0xffff : 0x0000;
u16 bgp = fgc ? 0x0000 : 0xffff;
bt431_select_reg(regs, BT431_REG_CRAM_BASE);
for (i = BT431_REG_CRAM_BASE; i <= BT431_REG_CRAM_END; i++) {
u16 value;
if (height << 6 <= i << 3)
value = bgp;
else if (width <= i % 8 << 3)
value = bgp;
else if (((width >> 3) & 0xffff) > i % 8)
value = fgp;
else
value = fgp & ~(bgp << (width % 8 << 1));
bt431_write_cmap_inc(regs, value);
}
}
static inline void bt431_init_cursor(struct bt431_regs *regs)
{
/* no crosshair window */
bt431_select_reg(regs, BT431_REG_WXLO);
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WXLO */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WXHI */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WYLO */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WYHI */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WWLO */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WWHI */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WHLO */
bt431_write_reg_inc(regs, 0x00); /* BT431_REG_WHHI */
}
/*
* linux/drivers/video/bt455.h
*
* Copyright 2003 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*/
#include <linux/types.h>
#include <asm/system.h>
/*
* Bt455 byte-wide registers, 32-bit aligned.
*/
struct bt455_regs {
volatile u8 addr_cmap;
u8 pad0[3];
volatile u8 addr_cmap_data;
u8 pad1[3];
volatile u8 addr_clr;
u8 pad2[3];
volatile u8 addr_ovly;
u8 pad3[3];
};
static inline void bt455_select_reg(struct bt455_regs *regs, int ir)
{
mb();
regs->addr_cmap = ir & 0x0f;
}
/*
* Read/write to a Bt455 color map register.
*/
static inline void bt455_read_cmap_entry(struct bt455_regs *regs, int cr,
u8* red, u8* green, u8* blue)
{
bt455_select_reg(regs, cr);
mb();
*red = regs->addr_cmap_data & 0x0f;
rmb();
*green = regs->addr_cmap_data & 0x0f;
rmb();
*blue = regs->addr_cmap_data & 0x0f;
}
static inline void bt455_write_cmap_entry(struct bt455_regs *regs, int cr,
u8 red, u8 green, u8 blue)
{
bt455_select_reg(regs, cr);
wmb();
regs->addr_cmap_data = red & 0x0f;
wmb();
regs->addr_cmap_data = green & 0x0f;
wmb();
regs->addr_cmap_data = blue & 0x0f;
}
static inline void bt455_write_ovly_entry(struct bt455_regs *regs, int cr,
u8 red, u8 green, u8 blue)
{
bt455_select_reg(regs, cr);
wmb();
regs->addr_ovly = red & 0x0f;
wmb();
regs->addr_ovly = green & 0x0f;
wmb();
regs->addr_ovly = blue & 0x0f;
}
static inline void bt455_set_cursor(struct bt455_regs *regs)
{
mb();
regs->addr_ovly = 0x0f;
wmb();
regs->addr_ovly = 0x0f;
wmb();
regs->addr_ovly = 0x0f;
}
static inline void bt455_erase_cursor(struct bt455_regs *regs)
{
/* bt455_write_cmap_entry(regs, 8, 0x00, 0x00, 0x00); */
/* bt455_write_cmap_entry(regs, 9, 0x00, 0x00, 0x00); */
bt455_write_ovly_entry(regs, 8, 0x03, 0x03, 0x03);
bt455_write_ovly_entry(regs, 9, 0x07, 0x07, 0x07);
wmb();
regs->addr_ovly = 0x09;
wmb();
regs->addr_ovly = 0x09;
wmb();
regs->addr_ovly = 0x09;
}
......@@ -25,7 +25,7 @@ config LOGO_LINUX_CLUT224
config LOGO_DEC_CLUT224
bool "224-color Digital Equipment Corporation Linux logo"
depends on LOGO && DECSTATION
depends on LOGO && MACH_DECSTATION
default y
config LOGO_MAC_CLUT224
......
......@@ -43,31 +43,25 @@
static struct fb_info fb_info;
static struct fb_var_screeninfo maxinefb_defined = {
.xres = 1024,
.yres = 768,
.xres_virtual = 1024,
.yres_virtual = 768,
.bits_per_pixel = 8,
.red.length = 8,
.green.length = 8,
.blue.length = 8,
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
.vmode = FB_VMODE_NONINTERLACED,
.xres = 1024,
.yres = 768,
.xres_virtual = 1024,
.yres_virtual = 768,
.bits_per_pixel =8,
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
.vmode = FB_VMODE_NONINTERLACED,
};
static struct fb_fix_screeninfo maxinefb_fix = {
.id = "Maxine onboard graphics 1024x768x8",
.smem_len = (1024*768),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1024,
.id = "Maxine onboard graphics 1024x768x8",
.smem_len = (1024*768),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1024,
};
/* Reference to machine type set in arch/mips/dec/prom/identify.c, KM */
extern unsigned long mips_machtype;
/* Handle the funny Inmos RamDAC/video controller ... */
void maxinefb_ims332_write_register(int regno, register unsigned int val)
......@@ -100,12 +94,12 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
/* value to be written into the palette reg. */
unsigned long hw_colorvalue = 0;
red >>= 8; /* The cmap fields are 16 bits */
green >>= 8; /* wide, but the harware colormap */
blue >>= 8; /* registers are only 8 bits wide */
red >>= 8; /* The cmap fields are 16 bits */
green >>= 8; /* wide, but the harware colormap */
blue >>= 8; /* registers are only 8 bits wide */
hw_colorvalue = (blue << 16) + (green << 8) + (red);
maxinefb_ims332_write_register(IMS332_REG_COLOR_PALETTE + regno,
hw_colorvalue);
return 0;
......@@ -113,16 +107,18 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
static struct fb_ops maxinefb_ops = {
.owner = THIS_MODULE,
.fb_setcolreg = maxinefb_setcolreg,
.fb_get_fix = gen_get_fix,
.fb_get_var = gen_get_var,
.fb_setcolreg = maxinefb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_imageblit = cfb_imageblit,
.fb_cursor = soft_cursor,
};
int __init maxinefb_init(void)
{
volatile unsigned char *fboff;
unsigned long fboff;
unsigned long fb_start;
int i;
......@@ -142,7 +138,7 @@ int __init maxinefb_init(void)
/* Clear screen */
for (fboff = fb_start; fboff < fb_start + 0x1ffff; fboff++)
*fboff = 0x0;
*(volatile unsigned char *)fboff = 0x0;
maxinefb_fix.smem_start = fb_start;
......@@ -159,7 +155,7 @@ int __init maxinefb_init(void)
}
fb_info.fbops = &maxinefb_ops;
fb_info.screen_base = (char *) maxinefb_fix.smem_start;
fb_info.screen_base = (char *)maxinefb_fix.smem_start;
fb_info.var = maxinefb_defined;
fb_info.fix = maxinefb_fix;
fb_info.flags = FBINFO_DEFAULT;
......
/*
* linux/drivers/video/pmag-aa-fb.c
* Copyright 2002 Karsten Merker <merker@debian.org>
*
* PMAG-AA TurboChannel framebuffer card support ... derived from
* pmag-ba-fb.c, which is Copyright (C) 1999, 2000, 2001 by
* Michael Engel <engel@unix-ag.org>, Karsten Merker <merker@debian.org>
* and Harald Koerfgen <hkoerfg@web.de>, which itself is derived from
* "HP300 Topcat framebuffer support (derived from macfb of all things)
* Phil Blundell <philb@gnu.org> 1998"
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
* 2002-09-28 Karsten Merker <merker@linuxtag.org>
* Version 0.01: First try to get a PMAG-AA running.
*
* 2003-02-24 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
* Version 0.02: Major code cleanup.
*
* 2003-09-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
* Hardware cursor support.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <asm/bootinfo.h>
#include <asm/dec/machtype.h>
#include <asm/dec/tc.h>
#include <video/fbcon.h>
#include <video/fbcon-cfb8.h>
#include "bt455.h"
#include "bt431.h"
/* Version information */
#define DRIVER_VERSION "0.02"
#define DRIVER_AUTHOR "Karsten Merker <merker@linuxtag.org>"
#define DRIVER_DESCRIPTION "PMAG-AA Framebuffer Driver"
/* Prototypes */
static int aafb_set_var(struct fb_var_screeninfo *var, int con,
struct fb_info *info);
/*
* Bt455 RAM DAC register base offset (rel. to TC slot base address).
*/
#define PMAG_AA_BT455_OFFSET 0x100000
/*
* Bt431 cursor generator offset (rel. to TC slot base address).
*/
#define PMAG_AA_BT431_OFFSET 0x180000
/*
* Begin of PMAG-AA framebuffer memory relative to TC slot address,
* resolution is 1280x1024x1 (8 bits deep, but only LSB is used).
*/
#define PMAG_AA_ONBOARD_FBMEM_OFFSET 0x200000
struct aafb_cursor {
struct timer_list timer;
int enable;
int on;
int vbl_cnt;
int blink_rate;
u16 x, y, width, height;
};
#define CURSOR_TIMER_FREQ (HZ / 50)
#define CURSOR_BLINK_RATE (20)
#define CURSOR_DRAW_DELAY (2)
struct aafb_info {
struct fb_info info;
struct display disp;
struct aafb_cursor cursor;
struct bt455_regs *bt455;
struct bt431_regs *bt431;
unsigned long fb_start;
unsigned long fb_size;
unsigned long fb_line_length;
};
/*
* Max 3 TURBOchannel slots -> max 3 PMAG-AA.
*/
static struct aafb_info my_fb_info[3];
static struct aafb_par {
} current_par;
static int currcon = -1;
static void aafb_set_cursor(struct aafb_info *info, int on)
{
struct aafb_cursor *c = &info->cursor;
if (on) {
bt431_position_cursor(info->bt431, c->x, c->y);
bt431_enable_cursor(info->bt431);
} else
bt431_erase_cursor(info->bt431);
}
static void aafbcon_cursor(struct display *disp, int mode, int x, int y)
{
struct aafb_info *info = (struct aafb_info *)disp->fb_info;
struct aafb_cursor *c = &info->cursor;
x *= fontwidth(disp);
y *= fontheight(disp);
if (c->x == x && c->y == y && (mode == CM_ERASE) == !c->enable)
return;
c->enable = 0;
if (c->on)
aafb_set_cursor(info, 0);
c->x = x - disp->var.xoffset;
c->y = y - disp->var.yoffset;
switch (mode) {
case CM_ERASE:
c->on = 0;
break;
case CM_DRAW:
case CM_MOVE:
if (c->on)
aafb_set_cursor(info, c->on);
else
c->vbl_cnt = CURSOR_DRAW_DELAY;
c->enable = 1;
break;
}
}
static int aafbcon_set_font(struct display *disp, int width, int height)
{
struct aafb_info *info = (struct aafb_info *)disp->fb_info;
struct aafb_cursor *c = &info->cursor;
u8 fgc = ~attr_bgcol_ec(disp, disp->conp);
if (width > 64 || height > 64 || width < 0 || height < 0)
return -EINVAL;
c->height = height;
c->width = width;
bt431_set_font(info->bt431, fgc, width, height);
return 1;
}
static void aafb_cursor_timer_handler(unsigned long data)
{
struct aafb_info *info = (struct aafb_info *)data;
struct aafb_cursor *c = &info->cursor;
if (!c->enable)
goto out;
if (c->vbl_cnt && --c->vbl_cnt == 0) {
c->on ^= 1;
aafb_set_cursor(info, c->on);
c->vbl_cnt = c->blink_rate;
}
out:
c->timer.expires = jiffies + CURSOR_TIMER_FREQ;
add_timer(&c->timer);
}
static void __init aafb_cursor_init(struct aafb_info *info)
{
struct aafb_cursor *c = &info->cursor;
c->enable = 1;
c->on = 1;
c->x = c->y = 0;
c->width = c->height = 0;
c->vbl_cnt = CURSOR_DRAW_DELAY;
c->blink_rate = CURSOR_BLINK_RATE;
init_timer(&c->timer);
c->timer.data = (unsigned long)info;
c->timer.function = aafb_cursor_timer_handler;
mod_timer(&c->timer, jiffies + CURSOR_TIMER_FREQ);
}
static void __exit aafb_cursor_exit(struct aafb_info *info)
{
struct aafb_cursor *c = &info->cursor;
del_timer_sync(&c->timer);
}
static struct display_switch aafb_switch8 = {
.setup = fbcon_cfb8_setup,
.bmove = fbcon_cfb8_bmove,
.clear = fbcon_cfb8_clear,
.putc = fbcon_cfb8_putc,
.putcs = fbcon_cfb8_putcs,
.revc = fbcon_cfb8_revc,
.cursor = aafbcon_cursor,
.set_font = aafbcon_set_font,
.clear_margins = fbcon_cfb8_clear_margins,
.fontwidthmask = FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
};
static void aafb_get_par(struct aafb_par *par)
{
*par = current_par;
}
static int aafb_get_fix(struct fb_fix_screeninfo *fix, int con,
struct fb_info *info)
{
struct aafb_info *ip = (struct aafb_info *)info;
memset(fix, 0, sizeof(struct fb_fix_screeninfo));
strcpy(fix->id, "PMAG-AA");
fix->smem_start = ip->fb_start;
fix->smem_len = ip->fb_size;
fix->type = FB_TYPE_PACKED_PIXELS;
fix->ypanstep = 1;
fix->ywrapstep = 1;
fix->visual = FB_VISUAL_MONO10;
fix->line_length = 1280;
fix->accel = FB_ACCEL_NONE;
return 0;
}
static void aafb_set_disp(struct display *disp, int con,
struct aafb_info *info)
{
struct fb_fix_screeninfo fix;
disp->fb_info = &info->info;
aafb_set_var(&disp->var, con, &info->info);
if (disp->conp && disp->conp->vc_sw && disp->conp->vc_sw->con_cursor)
disp->conp->vc_sw->con_cursor(disp->conp, CM_ERASE);
disp->dispsw = &aafb_switch8;
disp->dispsw_data = 0;
aafb_get_fix(&fix, con, &info->info);
disp->screen_base = (u8 *) fix.smem_start;
disp->visual = fix.visual;
disp->type = fix.type;
disp->type_aux = fix.type_aux;
disp->ypanstep = fix.ypanstep;
disp->ywrapstep = fix.ywrapstep;
disp->line_length = fix.line_length;
disp->next_line = 2048;
disp->can_soft_blank = 1;
disp->inverse = 0;
disp->scrollmode = SCROLL_YREDRAW;
aafbcon_set_font(disp, fontwidth(disp), fontheight(disp));
}
static int aafb_get_cmap(struct fb_cmap *cmap, int kspc, int con,
struct fb_info *info)
{
static u16 color[2] = {0x0000, 0x000f};
static struct fb_cmap aafb_cmap = {0, 2, color, color, color, NULL};
fb_copy_cmap(&aafb_cmap, cmap, kspc ? 0 : 2);
return 0;
}
static int aafb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
struct fb_info *info)
{
u16 color[2] = {0x0000, 0x000f};
if (cmap->start == 0
&& cmap->len == 2
&& memcmp(cmap->red, color, sizeof(color)) == 0
&& memcmp(cmap->green, color, sizeof(color)) == 0
&& memcmp(cmap->blue, color, sizeof(color)) == 0
&& cmap->transp == NULL)
return 0;
else
return -EINVAL;
}
static int aafb_ioctl(struct inode *inode, struct file *file, u32 cmd,
unsigned long arg, int con, struct fb_info *info)
{
/* TODO: Not yet implemented */
return -ENOIOCTLCMD;
}
static int aafb_switch(int con, struct fb_info *info)
{
struct aafb_info *ip = (struct aafb_info *)info;
struct display *old = (currcon < 0) ? &ip->disp : (fb_display + currcon);
struct display *new = (con < 0) ? &ip->disp : (fb_display + con);
if (old->conp && old->conp->vc_sw && old->conp->vc_sw->con_cursor)
old->conp->vc_sw->con_cursor(old->conp, CM_ERASE);
/* Set the current console. */
currcon = con;
aafb_set_disp(new, con, ip);
return 0;
}
static void aafb_encode_var(struct fb_var_screeninfo *var,
struct aafb_par *par)
{
var->xres = 1280;
var->yres = 1024;
var->xres_virtual = 2048;
var->yres_virtual = 1024;
var->xoffset = 0;
var->yoffset = 0;
var->bits_per_pixel = 8;
var->grayscale = 1;
var->red.offset = 0;
var->red.length = 0;
var->red.msb_right = 0;
var->green.offset = 0;
var->green.length = 1;
var->green.msb_right = 0;
var->blue.offset = 0;
var->blue.length = 0;
var->blue.msb_right = 0;
var->transp.offset = 0;
var->transp.length = 0;
var->transp.msb_right = 0;
var->nonstd = 0;
var->activate &= ~FB_ACTIVATE_MASK & FB_ACTIVATE_NOW;
var->accel_flags = 0;
var->sync = FB_SYNC_ON_GREEN;
var->vmode &= ~FB_VMODE_MASK & FB_VMODE_NONINTERLACED;
}
static int aafb_get_var(struct fb_var_screeninfo *var, int con,
struct fb_info *info)
{
if (con < 0) {
struct aafb_par par;
memset(var, 0, sizeof(struct fb_var_screeninfo));
aafb_get_par(&par);
aafb_encode_var(var, &par);
} else
*var = info->var;
return 0;
}
static int aafb_set_var(struct fb_var_screeninfo *var, int con,
struct fb_info *info)
{
struct aafb_par par;
aafb_get_par(&par);
aafb_encode_var(var, &par);
info->var = *var;
return 0;
}
static int aafb_update_var(int con, struct fb_info *info)
{
struct aafb_info *ip = (struct aafb_info *)info;
struct display *disp = (con < 0) ? &ip->disp : (fb_display + con);
if (con == currcon)
aafbcon_cursor(disp, CM_ERASE, ip->cursor.x, ip->cursor.y);
return 0;
}
/* 0 unblanks, any other blanks. */
static void aafb_blank(int blank, struct fb_info *info)
{
struct aafb_info *ip = (struct aafb_info *)info;
u8 val = blank ? 0x00 : 0x0f;
bt455_write_cmap_entry(ip->bt455, 1, val, val, val);
aafbcon_cursor(&ip->disp, CM_ERASE, ip->cursor.x, ip->cursor.y);
}
static struct fb_ops aafb_ops = {
.owner = THIS_MODULE,
.fb_get_fix = aafb_get_fix,
.fb_get_var = aafb_get_var,
.fb_set_var = aafb_set_var,
.fb_get_cmap = aafb_get_cmap,
.fb_set_cmap = aafb_set_cmap,
.fb_ioctl = aafb_ioctl
};
static int __init init_one(int slot)
{
unsigned long base_addr = get_tc_base_addr(slot);
struct aafb_info *ip = &my_fb_info[slot];
memset(ip, 0, sizeof(struct aafb_info));
/*
* Framebuffer display memory base address and friends.
*/
ip->bt455 = (struct bt455_regs *) (base_addr + PMAG_AA_BT455_OFFSET);
ip->bt431 = (struct bt431_regs *) (base_addr + PMAG_AA_BT431_OFFSET);
ip->fb_start = base_addr + PMAG_AA_ONBOARD_FBMEM_OFFSET;
ip->fb_size = 2048 * 1024; /* fb_fix_screeninfo.smem_length
seems to be physical */
ip->fb_line_length = 2048;
/*
* Let there be consoles..
*/
strcpy(ip->info.modename, "PMAG-AA");
ip->info.node = -1;
ip->info.flags = FBINFO_FLAG_DEFAULT;
ip->info.fbops = &aafb_ops;
ip->info.disp = &ip->disp;
ip->info.changevar = NULL;
ip->info.switch_con = &aafb_switch;
ip->info.updatevar = &aafb_update_var;
ip->info.blank = &aafb_blank;
aafb_set_disp(&ip->disp, currcon, ip);
/*
* Configure the RAM DACs.
*/
bt455_erase_cursor(ip->bt455);
/* Init colormap. */
bt455_write_cmap_entry(ip->bt455, 0, 0x00, 0x00, 0x00);
bt455_write_cmap_entry(ip->bt455, 1, 0x0f, 0x0f, 0x0f);
/* Init hardware cursor. */
bt431_init_cursor(ip->bt431);
aafb_cursor_init(ip);
/* Clear the screen. */
memset ((void *)ip->fb_start, 0, ip->fb_size);
if (register_framebuffer(&ip->info) < 0)
return -EINVAL;
printk(KERN_INFO "fb%d: %s frame buffer in TC slot %d\n",
GET_FB_IDX(ip->info.node), ip->info.modename, slot);
return 0;
}
static int __exit exit_one(int slot)
{
struct aafb_info *ip = &my_fb_info[slot];
if (unregister_framebuffer(&ip->info) < 0)
return -EINVAL;
return 0;
}
/*
* Initialise the framebuffer.
*/
int __init pmagaafb_init(void)
{
int sid;
int found = 0;
while ((sid = search_tc_card("PMAG-AA")) >= 0) {
found = 1;
claim_tc_card(sid);
init_one(sid);
}
return found ? 0 : -ENXIO;
}
static void __exit pmagaafb_exit(void)
{
int sid;
while ((sid = search_tc_card("PMAG-AA")) >= 0) {
exit_one(sid);
release_tc_card(sid);
}
}
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
MODULE_LICENSE("GPL");
#ifdef MODULE
module_init(pmagaafb_init);
module_exit(pmagaafb_exit);
#endif
......@@ -52,27 +52,27 @@ struct pmag_ba_ramdac_regs {
static struct fb_info pmagba_fb_info[3];
static struct fb_var_screeninfo pmagbafb_defined = {
.xres = 1024,
.xres = 1024,
.yres = 864,
.xres_virtual = 1024,
.yres_virtual = 864,
.bits_per_pixel = 8,
.xres_virtual = 1024,
.yres_virtual = 864,
.bits_per_pixel = 8,
.red.length = 8,
.green.length = 8,
.blue.length = 8,
.activate = FB_ACTIVATE_NOW,
.height = 274,
.width = 195,
.accel = FB_ACCEL_NONE,
.vmode = FB_VMODE_NONINTERLACED,
.activate = FB_ACTIVATE_NOW,
.height = 274,
.width = 195,
.accel = FB_ACCEL_NONE,
.vmode = FB_VMODE_NONINTERLACED,
};
static struct fb_fix_screeninfo pmagbafb_fix = {
.id = "PMAG-BA",
.smem_len = (1024 * 864),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1024,
.id = "PMAG-BA",
.smem_len = (1024 * 864),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1024,
};
/*
......@@ -89,10 +89,10 @@ void pmagbafb_erase_cursor(struct pmag_ba_ramdac_regs *bt459_regs)
* Set the palette.
*/
static int pmagbafb_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
struct fb_info *info)
unsigned blue, unsigned transp,
struct fb_info *info)
{
struct pmag_ba_ramdac_regs *bt459_regs = (struct pmag_ba_ramdac_regs *) info->par;
struct pmag_ba_ramdac_regs *bt459_regs = (struct pmag_ba_ramdac_regs *) info->par;
if (regno >= info->cmap.len)
return 1;
......@@ -111,6 +111,8 @@ static int pmagbafb_setcolreg(unsigned regno, unsigned red, unsigned green,
static struct fb_ops pmagbafb_ops = {
.owner = THIS_MODULE,
.fb_get_fix = gen_get_fix,
.fb_get_var = gen_get_var,
.fb_setcolreg = pmagbafb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
......@@ -122,6 +124,7 @@ int __init pmagbafb_init_one(int slot)
{
unsigned long base_addr = get_tc_base_addr(slot);
struct fb_info *info = &pmagba_fb_info[slot];
struct display *disp = &pmagba_disp[slot];
printk("PMAG-BA framebuffer in slot %d\n", slot);
/*
......@@ -145,7 +148,7 @@ int __init pmagbafb_init_one(int slot)
info->flags = FBINFO_DEFAULT;
fb_alloc_cmap(&fb_info.cmap, 256, 0);
if (register_framebuffer(info) < 0)
return 1;
return 0;
......
......@@ -55,27 +55,27 @@ struct pmagb_b_ramdac_regs {
static struct fb_info pmagbb_fb_info[3];
static struct fb_var_screeninfo pmagbbfb_defined = {
.xres = 1280,
.yres = 1024,
.xres_virtual = 1280,
.yres_virtual = 1024,
.bits_per_pixel = 8,
.xres = 1280,
.yres = 1024,
.xres_virtual = 1280,
.yres_virtual = 1024,
.bits_per_pixel = 8,
.red.length = 8,
.green.length = 8,
.blue.length = 8,
.activate = FB_ACTIVATE_NOW,
.height = 274,
.width = 195,
.accel_flags = FB_ACCEL_NONE,
.vmode = FB_VMODE_NONINTERLACED,
.activate = FB_ACTIVATE_NOW,
.height = 274,
.width = 195,
.accel_flags = FB_ACCEL_NONE,
.vmode = FB_VMODE_NONINTERLACED,
};
static struct fb_fix_screeninfo pmagbafb_fix = {
.id = "PMAGB-BA",
.smem_len = (1280 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1280,
.id = "PMAGB-BA",
.smem_len = (1280 * 1024),
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_PSEUDOCOLOR,
.line_length = 1280,
}
/*
......
......@@ -195,7 +195,7 @@ config SGI_PARTITION
config ULTRIX_PARTITION
bool "Ultrix partition table support" if PARTITION_ADVANCED
default y if DECSTATION
default y if MACH_DECSTATION
help
Say Y here if you would like to be able to read the hard disk
partition table format used by DEC (now Compaq) Ultrix machines.
......
......@@ -8,17 +8,18 @@
* archive for more details.
*/
#include <asm/addrspace.h>
/*
* IMS332 video controller register base address
*/
#define MAXINEFB_IMS332_ADDRESS 0xbc140000
#define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000)
/*
* Begin of DECstation 5000/xx onboard framebuffer memory, default resolution
* is 1024x768x8
*/
#define DS5000_xx_ONBOARD_FBMEM_START 0xaa000000
#define DS5000_xx_ONBOARD_FBMEM_START KSEG1ADDR(0x0a000000)
/*
* The IMS 332 video controller used in the DECstation 5000/xx series
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment