Merge tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull generic phy updates from Vinod Koul:
 "New HW Support:
   - Support for Embedded DisplayPort and DisplayPort submodes and
     driver support on Qualcomm X1E80100 edp driver
   - Qualcomm QMP UFS PHY for SM8475, QMP USB phy for QDU1000/QRU1000
     and eusb2-repeater for SMB2360
   - Samsung HDMI PHY for i.MX8MP, gs101 UFS phy
   - Mediatek XFI T-PHY support for mt7988
   - Rockchip usbdp combo phy driver

  Updates:
   - Qualcomm x4 lane EP support for sa8775p, v4 ad v6 support for
     X1E80100, SM8650 tables for UFS Gear 4 & 5 and correct voltage
     swing tables
   - Freescale imx8m-pci pcie link-up updates
   - Rockchip rx-common-refclk-mode support
   - More platform remove callback returning void conversions"

* tag 'phy-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  dt-bindings: phy: qcom,usb-snps-femto-v2: use correct fallback for sc8180x
  dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: fix msm899[68] power-domains
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: fix x1e80100-gen3x2 schema
  phy: qcpm-qmp-usb: Add support for QDU1000/QRU1000
  dt-bindings: phy: qcom,qmp-usb: Add QDU1000 USB3 PHY
  dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for QDU1000
  phy: qcom-qmp-pcie: add x4 lane EP support for sa8775p
  phy: samsung-ufs: ufs: exit on first reported error
  phy: samsung-ufs: ufs: remove superfluous mfd/syscon.h header
  phy: rockchip: fix CONFIG_TYPEC dependency
  phy: rockchip: usbdp: fix uninitialized variable
  phy: rockchip-snps-pcie3: add support for rockchip,rx-common-refclk-mode
  dt-bindings: phy: rockchip,pcie3-phy: add rockchip,rx-common-refclk-mode
  phy: rockchip: add usbdp combo phy driver
  dt-bindings: phy: add rockchip usbdp combo phy document
  phy: add driver for MediaTek XFI T-PHY
  dt-bindings: phy: mediatek,mt7988-xfi-tphy: add new bindings
  phy: freescale: fsl-samsung-hdmi: Convert to platform remove callback returning void
  phy: qcom: qmp-ufs: update SM8650 tables for Gear 4 & 5
  MAINTAINERS: Add phy-gs101-ufs file to Tensor GS101.
  ...

Documentation/devicetree/bindings/phy/fsl,imx8mp-hdmi-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8mp-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI PHY
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: apb
+      - const: ref
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    phy@32fdff00 {
+        compatible = "fsl,imx8mp-hdmi-phy";
+        reg = <0x32fdff00 0x100>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_24M>;
+        clock-names = "apb", "ref";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+        #clock-cells = <0>;
+        #phy-cells = <0>;
+    };

Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt7988-xfi-tphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7988 XFI T-PHY
+
+maintainers:
+  - Daniel Golle <daniel@makrotopia.org>
+
+description:
+  The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
+  used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
+  MediaTek's 10G-capabale MT7988 SoC.
+  In MediaTek's SDK sources, this unit is referred to as "pextp".
+
+properties:
+  compatible:
+    const: mediatek,mt7988-xfi-tphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XFI PHY clock
+      - description: XFI register clock
+
+  clock-names:
+    items:
+      - const: xfipll
+      - const: topxtal
+
+  resets:
+    items:
+      - description: Reset controller corresponding to the phy instance.
+
+  mediatek,usxgmii-performance-errata:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      One instance of the T-PHY on MT7988 suffers from a performance
+      problem in 10GBase-R mode which needs a work-around in the driver.
+      This flag enables a work-around ajusting an analog phy setting and
+      is required for XFI Port0 of the MT7988 SoC to be in compliance with
+      the SFP specification.
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mediatek,mt7988-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      phy@11f20000 {
+        compatible = "mediatek,mt7988-xfi-tphy";
+        reg = <0 0x11f20000 0 0x10000>;
+        clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+                 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+        clock-names = "xfipll", "topxtal";
+        resets = <&watchdog 14>;
+        mediatek,usxgmii-performance-errata;
+        #phy-cells = <0>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USBDP Combo PHY with Samsung IP block
+
+maintainers:
+  - Frank Wang <frank.wang@rock-chips.com>
+  - Zhang Yubing <yubing.zhang@rock-chips.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-usbdp-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    description: |
+      Cell allows setting the type of the PHY. Possible values are:
+      - PHY_TYPE_USB3
+      - PHY_TYPE_DP
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: immortal
+      - const: pclk
+      - const: utmi
+
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: init
+      - const: cmn
+      - const: lane
+      - const: pcs_apb
+      - const: pma_apb
+
+  rockchip,dp-lane-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 4
+    items:
+      maximum: 3
+    description:
+      An array of physical Type-C lanes indexes. Position of an entry
+      determines the DisplayPort (DP) lane index, while the value of an entry
+      indicates physical Type-C lane. The supported DP lanes number are 2 or 4.
+      e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2,
+      3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy
+      lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux =
+      <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C
+      phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If
+      DP lanes are mapped by DisplayPort Alt mode, this property is not needed.
+
+  rockchip,u2phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb2 phy general register files'.
+
+  rockchip,usb-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usb general register files'.
+
+  rockchip,usbdpphy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'usbdp phy general register files'.
+
+  rockchip,vo-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the 'video output general register files'.
+      When select the DP lane mapping will request its phandle.
+
+  sbu1-dc-gpios:
+    description:
+      GPIO connected to the SBU1 line of the USB-C connector via a big resistor
+      (~100K) to apply a DC offset for signalling the connector orientation.
+    maxItems: 1
+
+  sbu2-dc-gpios:
+    description:
+      GPIO connected to the SBU2 line of the USB-C connector via a big resistor
+      (~100K) to apply a DC offset for signalling the connector orientation.
+    maxItems: 1
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  mode-switch:
+    description: Flag the port as possible handler of altmode switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the PHY to a TypeC controller for the purpose of
+      handling orientation switching.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    usbdp_phy0: phy@fed80000 {
+      compatible = "rockchip,rk3588-usbdp-phy";
+      reg = <0xfed80000 0x10000>;
+      #phy-cells = <1>;
+      clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+               <&cru CLK_USBDP_PHY0_IMMORTAL>,
+               <&cru PCLK_USBDPPHY0>,
+               <&u2phy0>;
+      clock-names = "refclk", "immortal", "pclk", "utmi";
+      resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>,
+               <&cru SRST_USBDP_COMBO_PHY0_CMN>,
+               <&cru SRST_USBDP_COMBO_PHY0_LANE>,
+               <&cru SRST_USBDP_COMBO_PHY0_PCS>,
+               <&cru SRST_P_USBDPPHY0>;
+      reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+      rockchip,u2phy-grf = <&usb2phy0_grf>;
+      rockchip,usb-grf = <&usb_grf>;
+      rockchip,usbdpphy-grf = <&usbdpphy0_grf>;
+      rockchip,vo-grf = <&vo0_grf>;
+    };

Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml

@@ -21,6 +21,7 @@ properties:
       - qcom,sc8180x-edp-phy
       - qcom,sc8280xp-dp-phy
       - qcom,sc8280xp-edp-phy
+      - qcom,x1e80100-dp-phy
 
   reg:
     items:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -88,11 +88,11 @@ properties:
           - description: offset of PCIe 4-lane configuration register
           - description: offset of configuration bit for this PHY
 
-  "#clock-cells":
-    const: 0
+  "#clock-cells": true
 
   clock-output-names:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   "#phy-cells":
     const: 0
@@ -198,7 +198,6 @@ allOf:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
               - qcom,sm8650-qmp-gen4x2-pcie-phy
-              - qcom,x1e80100-qmp-gen3x2-pcie-phy
               - qcom,x1e80100-qmp-gen4x2-pcie-phy
     then:
       properties:
@@ -213,6 +212,27 @@ allOf:
         reset-names:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+              - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clock-output-names:
+          minItems: 2
+        "#clock-cells":
+          const: 1
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 1
+        "#clock-cells":
+          const: 0
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -32,6 +32,7 @@ properties:
       - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8450-qmp-ufs-phy
+      - qcom,sm8475-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
       - qcom,sm8650-qmp-ufs-phy
 
@@ -71,7 +72,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -86,6 +86,7 @@ allOf:
             enum:
               - qcom,msm8998-qmp-ufs-phy
               - qcom,sa8775p-qmp-ufs-phy
+              - qcom,sc7180-qmp-ufs-phy
               - qcom,sc7280-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
               - qcom,sc8280xp-qmp-ufs-phy
@@ -98,6 +99,7 @@ allOf:
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
               - qcom,sm8450-qmp-ufs-phy
+              - qcom,sm8475-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
               - qcom,sm8650-qmp-ufs-phy
     then:
@@ -127,6 +129,21 @@ allOf:
             - const: ref
             - const: qref
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,msm8998-qmp-ufs-phy
+    then:
+      properties:
+        power-domains:
+          false
+    else:
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -20,6 +20,7 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
+      - com,qdu1000-qmp-usb3-uni-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
       - qcom,sdm845-qmp-usb3-uni-phy
@@ -109,6 +110,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-qmp-usb3-uni-phy
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy

Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml

@@ -20,7 +20,9 @@ properties:
           - enum:
               - qcom,pm7550ba-eusb2-repeater
           - const: qcom,pm8550b-eusb2-repeater
-      - const: qcom,pm8550b-eusb2-repeater
+      - enum:
+          - qcom,pm8550b-eusb2-repeater
+          - qcom,smb2360-eusb2-repeater
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml

@@ -15,9 +15,6 @@ description: |
 properties:
   compatible:
     oneOf:
-      - enum:
-          - qcom,sc8180x-usb-hs-phy
-          - qcom,usb-snps-femto-v2-phy
       - items:
           - enum:
               - qcom,sa8775p-usb-hs-phy
@@ -25,7 +22,9 @@ properties:
           - const: qcom,usb-snps-hs-5nm-phy
       - items:
           - enum:
+              - qcom,qdu1000-usb-hs-phy
               - qcom,sc7280-usb-hs-phy
+              - qcom,sc8180x-usb-hs-phy
               - qcom,sdx55-usb-hs-phy
               - qcom,sdx65-usb-hs-phy
               - qcom,sm6375-usb-hs-phy

Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml

@@ -54,6 +54,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle to the syscon managing the pipe "general register files"
 
+  rockchip,rx-common-refclk-mode:
+    description: which lanes (by position) should be configured to run in
+      RX common reference clock mode. 0 means disabled, 1 means enabled.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml

@@ -15,6 +15,7 @@ properties:
 
   compatible:
     enum:
+      - google,gs101-ufs-phy
       - samsung,exynos7-ufs-phy
       - samsung,exynosautov9-ufs-phy
       - tesla,fsd-ufs-phy

MAINTAINERS

@@ -9312,6 +9312,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
 F:	arch/arm64/boot/dts/exynos/google/
 F:	drivers/clk/samsung/clk-gs101.c
+F:	drivers/phy/samsung/phy-gs101-ufs.c
 F:	include/dt-bindings/clock/google,gs101.h
 K:	[gG]oogle.?[tT]ensor
 
@@ -13987,6 +13988,7 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/phy/mediatek-ge-soc.c
 F:	drivers/net/phy/mediatek-ge.c
+F:	drivers/phy/mediatek/phy-mtk-xfi-tphy.c
 
 MEDIATEK I2C CONTROLLER DRIVER
 M:	Qii Wang <qii.wang@mediatek.com>

drivers/phy/freescale/Kconfig

@@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
 	  Enable this to add support for the PCIE PHY as found on
 	  i.MX8M family of SOCs.
 
+config PHY_FSL_SAMSUNG_HDMI_PHY
+	tristate "Samsung HDMI PHY support"
+	depends on OF && HAS_IOMEM && COMMON_CLK
+	help
+	  Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+
 endif
 
 config PHY_FSL_LYNX_28G

drivers/phy/freescale/Makefile

@@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
 obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
 obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
 obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
+obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)	+= phy-fsl-samsung-hdmi.o

drivers/phy/freescale/phy-fsl-samsung-hdmi.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define PHY_REG_00		0x00
+#define PHY_REG_01		0x04
+#define PHY_REG_02		0x08
+#define PHY_REG_08		0x20
+#define PHY_REG_09		0x24
+#define PHY_REG_10		0x28
+#define PHY_REG_11		0x2c
+
+#define PHY_REG_12		0x30
+#define  REG12_CK_DIV_MASK	GENMASK(5, 4)
+
+#define PHY_REG_13		0x34
+#define  REG13_TG_CODE_LOW_MASK	GENMASK(7, 0)
+
+#define PHY_REG_14		0x38
+#define  REG14_TOL_MASK		GENMASK(7, 4)
+#define  REG14_RP_CODE_MASK	GENMASK(3, 1)
+#define  REG14_TG_CODE_HIGH_MASK	GENMASK(0, 0)
+
+#define PHY_REG_15		0x3c
+#define PHY_REG_16		0x40
+#define PHY_REG_17		0x44
+#define PHY_REG_18		0x48
+#define PHY_REG_19		0x4c
+#define PHY_REG_20		0x50
+
+#define PHY_REG_21		0x54
+#define  REG21_SEL_TX_CK_INV	BIT(7)
+#define  REG21_PMS_S_MASK	GENMASK(3, 0)
+
+#define PHY_REG_22		0x58
+#define PHY_REG_23		0x5c
+#define PHY_REG_24		0x60
+#define PHY_REG_25		0x64
+#define PHY_REG_26		0x68
+#define PHY_REG_27		0x6c
+#define PHY_REG_28		0x70
+#define PHY_REG_29		0x74
+#define PHY_REG_30		0x78
+#define PHY_REG_31		0x7c
+#define PHY_REG_32		0x80
+
+/*
+ * REG33 does not match the ref manual. According to Sandor Yu from NXP,
+ * "There is a doc issue on the i.MX8MP latest RM"
+ * REG33 is being used per guidance from Sandor
+ */
+
+#define PHY_REG_33		0x84
+#define  REG33_MODE_SET_DONE	BIT(7)
+#define  REG33_FIX_DA		BIT(1)
+
+#define PHY_REG_34		0x88
+#define  REG34_PHY_READY	BIT(7)
+#define  REG34_PLL_LOCK		BIT(6)
+#define  REG34_PHY_CLK_READY	BIT(5)
+
+#define PHY_REG_35		0x8c
+#define PHY_REG_36		0x90
+#define PHY_REG_37		0x94
+#define PHY_REG_38		0x98
+#define PHY_REG_39		0x9c
+#define PHY_REG_40		0xa0
+#define PHY_REG_41		0xa4
+#define PHY_REG_42		0xa8
+#define PHY_REG_43		0xac
+#define PHY_REG_44		0xb0
+#define PHY_REG_45		0xb4
+#define PHY_REG_46		0xb8
+#define PHY_REG_47		0xbc
+
+#define PHY_PLL_DIV_REGS_NUM 6
+
+struct phy_config {
+	u32	pixclk;
+	u8	pll_div_regs[PHY_PLL_DIV_REGS_NUM];
+};
+
+static const struct phy_config phy_pll_cfg[] = {
+	{
+		.pixclk = 22250000,
+		.pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 23750000,
+		.pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
+	}, {
+		.pixclk = 24000000,
+		.pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 24024000,
+		.pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
+	}, {
+		.pixclk = 25175000,
+		.pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
+	}, {
+		.pixclk = 25200000,
+		.pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 26750000,
+		.pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 27000000,
+		.pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 27027000,
+		.pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 29500000,
+		.pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 30750000,
+		.pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 30888000,
+		.pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
+	}, {
+		.pixclk = 33750000,
+		.pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 35000000,
+		.pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 36000000,
+		.pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 36036000,
+		.pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 40000000,
+		.pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 43200000,
+		.pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 43243200,
+		.pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 44500000,
+		.pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
+	}, {
+		.pixclk = 47000000,
+		.pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
+	}, {
+		.pixclk = 47500000,
+		.pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
+	}, {
+		.pixclk = 50349650,
+		.pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
+	}, {
+		.pixclk = 50400000,
+		.pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 53250000,
+		.pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 53500000,
+		.pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 54000000,
+		.pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 54054000,
+		.pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 59000000,
+		.pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 59340659,
+		.pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
+	}, {
+		.pixclk = 59400000,
+		.pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 61500000,
+		.pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 63500000,
+		.pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 67500000,
+		.pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
+	}, {
+		.pixclk = 70000000,
+		.pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 72000000,
+		.pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 72072000,
+		.pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 74176000,
+		.pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
+	}, {
+		.pixclk = 74250000,
+		.pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
+	}, {
+		.pixclk = 78500000,
+		.pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 80000000,
+		.pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 82000000,
+		.pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 82500000,
+		.pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
+	}, {
+		.pixclk = 89000000,
+		.pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
+	}, {
+		.pixclk = 90000000,
+		.pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 94000000,
+		.pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
+	}, {
+		.pixclk = 95000000,
+		.pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
+	}, {
+		.pixclk = 98901099,
+		.pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
+	}, {
+		.pixclk = 99000000,
+		.pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
+	}, {
+		.pixclk = 100699300,
+		.pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
+	}, {
+		.pixclk = 100800000,
+		.pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 102500000,
+		.pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
+	}, {
+		.pixclk = 104750000,
+		.pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
+	}, {
+		.pixclk = 106500000,
+		.pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 107000000,
+		.pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 108000000,
+		.pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 108108000,
+		.pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 118000000,
+		.pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 118800000,
+		.pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 123000000,
+		.pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 127000000,
+		.pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 135000000,
+		.pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 135580000,
+		.pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
+	}, {
+		.pixclk = 137520000,
+		.pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
+	}, {
+		.pixclk = 138750000,
+		.pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
+	}, {
+		.pixclk = 140000000,
+		.pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
+	}, {
+		.pixclk = 144000000,
+		.pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 148352000,
+		.pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
+	}, {
+		.pixclk = 148500000,
+		.pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
+	}, {
+		.pixclk = 154000000,
+		.pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+	}, {
+		.pixclk = 157000000,
+		.pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
+	}, {
+		.pixclk = 160000000,
+		.pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
+	}, {
+		.pixclk = 162000000,
+		.pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
+	}, {
+		.pixclk = 164000000,
+		.pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
+	}, {
+		.pixclk = 165000000,
+		.pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
+	}, {
+		.pixclk = 180000000,
+		.pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 185625000,
+		.pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
+	}, {
+		.pixclk = 188000000,
+		.pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
+	}, {
+		.pixclk = 198000000,
+		.pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
+	}, {
+		.pixclk = 205000000,
+		.pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
+	}, {
+		.pixclk = 209500000,
+		.pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
+	}, {
+		.pixclk = 213000000,
+		.pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 216000000,
+		.pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 216216000,
+		.pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 237600000,
+		.pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 254000000,
+		.pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 277500000,
+		.pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
+	}, {
+		.pixclk = 288000000,
+		.pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 297000000,
+		.pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
+	},
+};
+
+struct reg_settings {
+	u8 reg;
+	u8 val;
+};
+
+static const struct reg_settings common_phy_cfg[] = {
+	{ PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
+	{ PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
+	{ PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+	/* REG12 pixclk specific */
+	/* REG13 pixclk specific */
+	/* REG14 pixclk specific */
+	{ PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
+	{ PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
+	{ PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+	/* REG21 pixclk specific */
+	{ PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
+	{ PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
+	{ PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
+	{ PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
+	{ PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
+	{ PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
+	{ PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
+	{ PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
+	{ PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
+	{ PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
+	{ PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
+	{ PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
+	{ PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+};
+
+struct fsl_samsung_hdmi_phy {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *apbclk;
+	struct clk *refclk;
+
+	/* clk provider */
+	struct clk_hw hw;
+	const struct phy_config *cur_cfg;
+};
+
+static inline struct fsl_samsung_hdmi_phy *
+to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
+				      const struct phy_config *cfg)
+{
+	u8 div = 0x1;
+
+	switch (cfg->pixclk) {
+	case  22250000 ...  33750000:
+		div = 0xf;
+		break;
+	case  35000000 ...  40000000:
+		div = 0xb;
+		break;
+	case  43200000 ...  47500000:
+		div = 0x9;
+		break;
+	case  50349650 ...  63500000:
+		div = 0x7;
+		break;
+	case  67500000 ...  90000000:
+		div = 0x5;
+		break;
+	case  94000000 ... 148500000:
+		div = 0x3;
+		break;
+	case 154000000 ... 297000000:
+		div = 0x1;
+		break;
+	}
+
+	writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
+	       phy->regs + PHY_REG_21);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
+					    const struct phy_config *cfg)
+{
+	u32 pclk = cfg->pixclk;
+	u32 fld_tg_code;
+	u32 pclk_khz;
+	u8 div = 1;
+
+	switch (cfg->pixclk) {
+	case  22250000 ...  47500000:
+		div = 1;
+		break;
+	case  50349650 ...  99000000:
+		div = 2;
+		break;
+	case 100699300 ... 198000000:
+		div = 4;
+		break;
+	case 205000000 ... 297000000:
+		div = 8;
+		break;
+	}
+
+	writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+
+	/*
+	 * Calculation for the frequency lock detector target code (fld_tg_code)
+	 * is based on reference manual register description of PHY_REG13
+	 * (13.10.3.1.14.2):
+	 *   1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
+	 *   2nd) Increase resolution to avoid rounding issues
+	 *   3th) Do the div (256 / Freq. of int_pllclk) * 24
+	 *   4th) Reduce the resolution and always round up since the NXP
+	 *        settings rounding up always too. TODO: Check if that is
+	 *        correct.
+	 */
+	pclk /= div;
+	pclk_khz = pclk / 1000;
+	fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
+	fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
+
+	/* FLD_TOL and FLD_RP_CODE taken from downstream driver */
+	writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
+	       phy->regs + PHY_REG_13);
+	writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
+	       FIELD_PREP(REG14_RP_CODE_MASK, 2) |
+	       FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
+	       phy->regs + PHY_REG_14);
+}
+
+static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
+					  const struct phy_config *cfg)
+{
+	int i, ret;
+	u8 val;
+
+	/* HDMI PHY init */
+	writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+
+	/* common PHY registers */
+	for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
+		writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
+
+	/* set individual PLL registers PHY_REG2 ... PHY_REG7 */
+	for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
+		writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+
+	fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+	fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
+
+	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+
+	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+				 val & REG34_PLL_LOCK, 50, 20000);
+	if (ret)
+		dev_err(phy->dev, "PLL failed to lock\n");
+
+	return ret;
+}
+
+static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+
+	if (!phy->cur_cfg)
+		return 74250000;
+
+	return phy->cur_cfg->pixclk;
+}
+
+static long phy_clk_round_rate(struct clk_hw *hw,
+			       unsigned long rate, unsigned long *parent_rate)
+{
+	int i;
+
+	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+		if (phy_pll_cfg[i].pixclk <= rate)
+			return phy_pll_cfg[i].pixclk;
+
+	return -EINVAL;
+}
+
+static int phy_clk_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long parent_rate)
+{
+	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+	int i;
+
+	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+		if (phy_pll_cfg[i].pixclk <= rate)
+			break;
+
+	if (i < 0)
+		return -EINVAL;
+
+	phy->cur_cfg = &phy_pll_cfg[i];
+
+	return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+}
+
+static const struct clk_ops phy_clk_ops = {
+	.recalc_rate = phy_clk_recalc_rate,
+	.round_rate = phy_clk_round_rate,
+	.set_rate = phy_clk_set_rate,
+};
+
+static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
+{
+	struct device *dev = phy->dev;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct clk *phyclk;
+	int ret;
+
+	parent_name = __clk_get_name(phy->refclk);
+
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = 0;
+	init.name = "hdmi_pclk";
+	init.ops = &phy_clk_ops;
+
+	phy->hw.init = &init;
+
+	phyclk = devm_clk_register(dev, &phy->hw);
+	if (IS_ERR(phyclk))
+		return dev_err_probe(dev, PTR_ERR(phyclk),
+				     "failed to register clock\n");
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, phyclk);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to register clock provider\n");
+
+	return 0;
+}
+
+static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct fsl_samsung_hdmi_phy *phy;
+	int ret;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, phy);
+	phy->dev = &pdev->dev;
+
+	phy->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(phy->regs))
+		return PTR_ERR(phy->regs);
+
+	phy->apbclk = devm_clk_get(phy->dev, "apb");
+	if (IS_ERR(phy->apbclk))
+		return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
+				     "failed to get apb clk\n");
+
+	phy->refclk = devm_clk_get(phy->dev, "ref");
+	if (IS_ERR(phy->refclk))
+		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
+				     "failed to get ref clk\n");
+
+	ret = clk_prepare_enable(phy->apbclk);
+	if (ret) {
+		dev_err(phy->dev, "failed to enable apbclk\n");
+		return ret;
+	}
+
+	pm_runtime_get_noresume(phy->dev);
+	pm_runtime_set_active(phy->dev);
+	pm_runtime_enable(phy->dev);
+
+	ret = phy_clk_register(phy);
+	if (ret) {
+		dev_err(&pdev->dev, "register clk failed\n");
+		goto register_clk_failed;
+	}
+
+	pm_runtime_put(phy->dev);
+
+	return 0;
+
+register_clk_failed:
+	clk_disable_unprepare(phy->apbclk);
+
+	return ret;
+}
+
+static void fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
+{
+	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(phy->apbclk);
+
+	return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
+{
+	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(phy->apbclk);
+	if (ret) {
+		dev_err(phy->dev, "failed to enable apbclk\n");
+		return ret;
+	}
+
+	if (phy->cur_cfg)
+		ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+
+	return ret;
+
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
+				 fsl_samsung_hdmi_phy_suspend,
+				 fsl_samsung_hdmi_phy_resume, NULL);
+
+static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
+	{
+		.compatible = "fsl,imx8mp-hdmi-phy",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
+
+static struct platform_driver fsl_samsung_hdmi_phy_driver = {
+	.probe  = fsl_samsung_hdmi_phy_probe,
+	.remove_new = fsl_samsung_hdmi_phy_remove,
+	.driver = {
+		.name = "fsl-samsung-hdmi-phy",
+		.of_match_table = fsl_samsung_hdmi_phy_of_match,
+		.pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
+	},
+};
+module_platform_driver(fsl_samsung_hdmi_phy_driver);
+
+MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
+MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL");

drivers/phy/mediatek/Kconfig

@@ -13,6 +13,17 @@ config PHY_MTK_PCIE
 	  callback for PCIe GEN3 port, it supports software efuse
 	  initialization.
 
+config PHY_MTK_XFI_TPHY
+	tristate "MediaTek 10GE SerDes XFI T-PHY driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek XFI T-PHY driver.
+	  The driver provides access to the Ethernet SerDes T-PHY supporting
+	  1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
+	  via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
+
 config PHY_MTK_TPHY
 	tristate "MediaTek T-PHY Driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/phy/mediatek/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-pcie.o
 obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
 obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
 obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_XFI_TPHY)		+= phy-mtk-xfi-tphy.o
 
 phy-mtk-hdmi-drv-y			:= phy-mtk-hdmi.o
 phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-mt2701.o

drivers/phy/mediatek/phy-mtk-xfi-tphy.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MediaTek 10GE SerDes XFI T-PHY driver
+ *
+ * Copyright (c) 2024 Daniel Golle <daniel@makrotopia.org>
+ *                    Bc-bocun Chen <bc-bocun.chen@mediatek.com>
+ * based on mtk_usxgmii.c and mtk_sgmii.c found in MediaTek's SDK (GPL-2.0)
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Henry Yen <henry.yen@mediatek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+
+#include "phy-mtk-io.h"
+
+#define MTK_XFI_TPHY_NUM_CLOCKS		2
+
+#define REG_DIG_GLB_70			0x0070
+#define  XTP_PCS_RX_EQ_IN_PROGRESS(x)	FIELD_PREP(GENMASK(25, 24), (x))
+#define  XTP_PCS_MODE_MASK		GENMASK(17, 16)
+#define  XTP_PCS_MODE(x)		FIELD_PREP(GENMASK(17, 16), (x))
+#define  XTP_PCS_RST_B			BIT(15)
+#define  XTP_FRC_PCS_RST_B		BIT(14)
+#define  XTP_PCS_PWD_SYNC_MASK		GENMASK(13, 12)
+#define  XTP_PCS_PWD_SYNC(x)		FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
+#define  XTP_PCS_PWD_ASYNC_MASK		GENMASK(11, 10)
+#define  XTP_PCS_PWD_ASYNC(x)		FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
+#define  XTP_FRC_PCS_PWD_ASYNC		BIT(8)
+#define  XTP_PCS_UPDT			BIT(4)
+#define  XTP_PCS_IN_FR_RG		BIT(0)
+
+#define REG_DIG_GLB_F4			0x00f4
+#define  XFI_DPHY_PCS_SEL		BIT(0)
+#define   XFI_DPHY_PCS_SEL_SGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
+#define   XFI_DPHY_PCS_SEL_USXGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
+#define  XFI_DPHY_AD_SGDT_FRC_EN	BIT(5)
+
+#define REG_DIG_LN_TRX_40		0x3040
+#define  XTP_LN_FRC_TX_DATA_EN		BIT(29)
+#define  XTP_LN_TX_DATA_EN		BIT(28)
+
+#define REG_DIG_LN_TRX_B0		0x30b0
+#define  XTP_LN_FRC_TX_MACCK_EN		BIT(5)
+#define  XTP_LN_TX_MACCK_EN		BIT(4)
+
+#define REG_ANA_GLB_D0			0x90d0
+#define  XTP_GLB_USXGMII_SEL_MASK	GENMASK(3, 1)
+#define  XTP_GLB_USXGMII_SEL(x)		FIELD_PREP(GENMASK(3, 1), (x))
+#define  XTP_GLB_USXGMII_EN		BIT(0)
+
+/**
+ * struct mtk_xfi_tphy - run-time data of the XFI phy instance
+ * @base: IO memory area to access phy registers.
+ * @dev: Kernel device used to output prefixed debug info.
+ * @reset: Reset control corresponding to the phy instance.
+ * @clocks: All clocks required for the phy to operate.
+ * @da_war: Enables work-around for 10GBase-R mode.
+ */
+struct mtk_xfi_tphy {
+	void __iomem		*base;
+	struct device		*dev;
+	struct reset_control	*reset;
+	struct clk_bulk_data	clocks[MTK_XFI_TPHY_NUM_CLOCKS];
+	bool			da_war;
+};
+
+/**
+ * mtk_xfi_tphy_setup() - Setup phy for specified interface mode.
+ * @xfi_tphy: XFI phy instance.
+ * @interface: Ethernet interface mode
+ *
+ * The setup function is the condensed result of combining the 5 functions which
+ * setup the phy in MediaTek's GPL licensed public SDK sources. They can be found
+ * in mtk_sgmii.c[1] as well as mtk_usxgmii.c[2].
+ *
+ * Many magic values have been replaced by register and bit definitions, however,
+ * that has not been possible in all cases. While the vendor driver uses a
+ * sequence of 32-bit writes, here we try to only modify the actually required
+ * bits.
+ *
+ * [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/b72d6cba92bf9e29fb035c03052fa1e86664a25b/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_sgmii.c
+ *
+ * [2]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/dec96a1d9b82cdcda4a56453fd0b453d4cab4b85/21.02/files/target/linux/mediatek/files-5.4/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+ */
+static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
+			       phy_interface_t interface)
+{
+	bool is_1g, is_2p5g, is_5g, is_10g, da_war, use_lynxi_pcs;
+
+	/* shorthands for specific clock speeds depending on interface mode */
+	is_1g = interface == PHY_INTERFACE_MODE_1000BASEX ||
+		interface == PHY_INTERFACE_MODE_SGMII;
+	is_2p5g = interface == PHY_INTERFACE_MODE_2500BASEX;
+	is_5g = interface == PHY_INTERFACE_MODE_5GBASER;
+	is_10g = interface == PHY_INTERFACE_MODE_10GBASER ||
+		 interface == PHY_INTERFACE_MODE_USXGMII;
+
+	/* Is overriding 10GBase-R tuning value required? */
+	da_war = xfi_tphy->da_war && (interface == PHY_INTERFACE_MODE_10GBASER);
+
+	/* configure input mux to either
+	 *  - USXGMII PCS (64b/66b coding) for 5G/10G
+	 *  - LynxI PCS (8b/10b coding) for 1G/2.5G
+	 */
+	use_lynxi_pcs = is_1g || is_2p5g;
+
+	dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
+
+	/* Setup PLL setting */
+	mtk_phy_update_bits(xfi_tphy->base + 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
+	mtk_phy_update_bits(xfi_tphy->base + 0x2030, 0x500, is_1g ? 0x0 : 0x500);
+	mtk_phy_update_bits(xfi_tphy->base + 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
+	mtk_phy_update_bits(xfi_tphy->base + 0x2040, 0x340000, is_1g ? 0x200000 : 0x140000);
+
+	/* Setup RXFE BW setting */
+	mtk_phy_update_bits(xfi_tphy->base + 0x50f0, 0xc10, is_1g ? 0x410 : is_5g ? 0x800 : 0x400);
+	mtk_phy_update_bits(xfi_tphy->base + 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
+
+	/* Setup RX CDR setting */
+	mtk_phy_update_bits(xfi_tphy->base + 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5078, 0xf000400, is_5g ? 0x8000000 :
+									0x7000400);
+	mtk_phy_update_bits(xfi_tphy->base + 0x507c, 0x5000500, is_5g ? 0x4000400 :
+									0x1000100);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5080, 0x1410, is_1g ? 0x400 : is_5g ? 0x1010 : 0x0);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5084, 0x30300, is_1g ? 0x30300 :
+							      is_5g ? 0x30100 :
+								      0x100);
+	mtk_phy_update_bits(xfi_tphy->base + 0x5088, 0x60200, is_1g ? 0x20200 :
+							      is_5g ? 0x40000 :
+								      0x20000);
+
+	/* Setting RXFE adaptation range setting */
+	mtk_phy_update_bits(xfi_tphy->base + 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
+	mtk_phy_update_bits(xfi_tphy->base + 0x50a8, 0xee0000, is_5g ? 0x800000 :
+								       0x6e0000);
+	mtk_phy_update_bits(xfi_tphy->base + 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
+
+	if (is_10g)
+		writel(0x01423342, xfi_tphy->base + 0x00f8);
+	else if (is_5g)
+		writel(0x00a132a1, xfi_tphy->base + 0x00f8);
+	else if (is_2p5g)
+		writel(0x009c329c, xfi_tphy->base + 0x00f8);
+	else
+		writel(0x00fa32fa, xfi_tphy->base + 0x00f8);
+
+	/* Force SGDT_OUT off and select PCS */
+	mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_F4,
+			    XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
+			    XFI_DPHY_AD_SGDT_FRC_EN |
+			    (use_lynxi_pcs ? XFI_DPHY_PCS_SEL_SGMII :
+					     XFI_DPHY_PCS_SEL_USXGMII));
+
+	/* Force GLB_CKDET_OUT */
+	mtk_phy_set_bits(xfi_tphy->base + 0x0030, 0xc00);
+
+	/* Force AEQ on */
+	writel(XTP_PCS_RX_EQ_IN_PROGRESS(2) | XTP_PCS_PWD_SYNC(2) | XTP_PCS_PWD_ASYNC(2),
+	       xfi_tphy->base + REG_DIG_GLB_70);
+
+	usleep_range(1, 5);
+	writel(XTP_LN_FRC_TX_DATA_EN, xfi_tphy->base + REG_DIG_LN_TRX_40);
+
+	/* Setup TX DA default value */
+	mtk_phy_update_bits(xfi_tphy->base + 0x30b0, 0x30, 0x20);
+	writel(0x00008a01, xfi_tphy->base + 0x3028);
+	writel(0x0000a884, xfi_tphy->base + 0x302c);
+	writel(0x00083002, xfi_tphy->base + 0x3024);
+
+	/* Setup RG default value */
+	if (use_lynxi_pcs) {
+		writel(0x00011110, xfi_tphy->base + 0x3010);
+		writel(0x40704000, xfi_tphy->base + 0x3048);
+	} else {
+		writel(0x00022220, xfi_tphy->base + 0x3010);
+		writel(0x0f020a01, xfi_tphy->base + 0x5064);
+		writel(0x06100600, xfi_tphy->base + 0x50b4);
+		if (interface == PHY_INTERFACE_MODE_USXGMII)
+			writel(0x40704000, xfi_tphy->base + 0x3048);
+		else
+			writel(0x47684100, xfi_tphy->base + 0x3048);
+	}
+
+	if (is_1g)
+		writel(0x0000c000, xfi_tphy->base + 0x3064);
+
+	/* Setup RX EQ initial value */
+	mtk_phy_update_bits(xfi_tphy->base + 0x3050, 0xa8000000,
+			    (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xa8000000 : 0x0);
+	mtk_phy_update_bits(xfi_tphy->base + 0x3054, 0xaa,
+			    (interface != PHY_INTERFACE_MODE_10GBASER) ? 0xaa : 0x0);
+
+	if (!use_lynxi_pcs)
+		writel(0x00000f00, xfi_tphy->base + 0x306c);
+	else if (is_2p5g)
+		writel(0x22000f00, xfi_tphy->base + 0x306c);
+	else
+		writel(0x20200f00, xfi_tphy->base + 0x306c);
+
+	mtk_phy_update_bits(xfi_tphy->base + 0xa008, 0x10000, da_war ? 0x10000 : 0x0);
+
+	mtk_phy_update_bits(xfi_tphy->base + 0xa060, 0x50000, use_lynxi_pcs ? 0x50000 : 0x40000);
+
+	/* Setup PHYA speed */
+	mtk_phy_update_bits(xfi_tphy->base + REG_ANA_GLB_D0,
+			    XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
+			    is_10g ?  XTP_GLB_USXGMII_SEL(0) :
+			    is_5g ?   XTP_GLB_USXGMII_SEL(1) :
+			    is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
+				      XTP_GLB_USXGMII_SEL(3));
+	mtk_phy_set_bits(xfi_tphy->base + REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
+
+	/* Release reset */
+	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_GLB_70,
+			 XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
+	usleep_range(150, 500);
+
+	/* Switch to P0 */
+	mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+			    XTP_PCS_IN_FR_RG |
+			    XTP_FRC_PCS_PWD_ASYNC |
+			    XTP_PCS_PWD_ASYNC_MASK |
+			    XTP_PCS_PWD_SYNC_MASK |
+			    XTP_PCS_UPDT,
+			    XTP_PCS_IN_FR_RG |
+			    XTP_FRC_PCS_PWD_ASYNC |
+			    XTP_PCS_UPDT);
+	usleep_range(1, 5);
+
+	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
+	usleep_range(15, 50);
+
+	if (use_lynxi_pcs) {
+		/* Switch to Gen2 */
+		mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+				    XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+				    XTP_PCS_MODE(1) | XTP_PCS_UPDT);
+	} else {
+		/* Switch to Gen3 */
+		mtk_phy_update_bits(xfi_tphy->base + REG_DIG_GLB_70,
+				    XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
+				    XTP_PCS_MODE(2) | XTP_PCS_UPDT);
+	}
+	usleep_range(1, 5);
+
+	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_70, XTP_PCS_UPDT);
+
+	usleep_range(100, 500);
+
+	/* Enable MAC CK */
+	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
+	mtk_phy_clear_bits(xfi_tphy->base + REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
+
+	/* Enable TX data */
+	mtk_phy_set_bits(xfi_tphy->base + REG_DIG_LN_TRX_40,
+			 XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
+	usleep_range(400, 1000);
+}
+
+/**
+ * mtk_xfi_tphy_set_mode() - Setup phy for specified interface mode.
+ *
+ * @phy: Phy instance.
+ * @mode: Only PHY_MODE_ETHERNET is supported.
+ * @submode: An Ethernet interface mode.
+ *
+ * Validate selected mode and call function mtk_xfi_tphy_setup().
+ *
+ * Return:
+ * * %0 - OK
+ * * %-EINVAL - invalid mode
+ */
+static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
+				 submode)
+{
+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EINVAL;
+
+	switch (submode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_2500BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_5GBASER:
+	case PHY_INTERFACE_MODE_10GBASER:
+	case PHY_INTERFACE_MODE_USXGMII:
+		mtk_xfi_tphy_setup(xfi_tphy, submode);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/**
+ * mtk_xfi_tphy_reset() - Reset the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Reset the phy using the external reset controller.
+ *
+ * Return:
+ * %0 - OK
+ */
+static int mtk_xfi_tphy_reset(struct phy *phy)
+{
+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+	reset_control_assert(xfi_tphy->reset);
+	usleep_range(100, 500);
+	reset_control_deassert(xfi_tphy->reset);
+	usleep_range(1, 10);
+
+	return 0;
+}
+
+/**
+ * mtk_xfi_tphy_power_on() - Power-on the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Prepare and enable all clocks required for the phy to operate.
+ *
+ * Return:
+ * See clk_bulk_prepare_enable().
+ */
+static int mtk_xfi_tphy_power_on(struct phy *phy)
+{
+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+	return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+}
+
+/**
+ * mtk_xfi_tphy_power_off() - Power-off the phy.
+ *
+ * @phy: Phy instance.
+ *
+ * Disable and unprepare all clocks previously enabled.
+ *
+ * Return:
+ * See clk_bulk_prepare_disable().
+ */
+static int mtk_xfi_tphy_power_off(struct phy *phy)
+{
+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+
+	return 0;
+}
+
+static const struct phy_ops mtk_xfi_tphy_ops = {
+	.power_on	= mtk_xfi_tphy_power_on,
+	.power_off	= mtk_xfi_tphy_power_off,
+	.set_mode	= mtk_xfi_tphy_set_mode,
+	.reset		= mtk_xfi_tphy_reset,
+	.owner		= THIS_MODULE,
+};
+
+/**
+ * mtk_xfi_tphy_probe() - Probe phy instance from Device Tree.
+ * @pdev: Matching platform device.
+ *
+ * The probe function gets IO resource, clocks, reset controller and
+ * whether the DA work-around for 10GBase-R is required from Device Tree and
+ * allocates memory for holding that information in a struct mtk_xfi_tphy.
+ *
+ * Return:
+ * * %0       - OK
+ * * %-ENODEV - Missing associated Device Tree node (should never happen).
+ * * %-ENOMEM - Out of memory.
+ * * Any error value which devm_platform_ioremap_resource(),
+ *   devm_clk_bulk_get(), devm_reset_control_get_exclusive(),
+ *   devm_phy_create() or devm_of_phy_provider_register() may return.
+ */
+static int mtk_xfi_tphy_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct phy_provider *phy_provider;
+	struct mtk_xfi_tphy *xfi_tphy;
+	struct phy *phy;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
+	if (!xfi_tphy)
+		return -ENOMEM;
+
+	xfi_tphy->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(xfi_tphy->base))
+		return PTR_ERR(xfi_tphy->base);
+
+	xfi_tphy->dev = &pdev->dev;
+	xfi_tphy->clocks[0].id = "topxtal";
+	xfi_tphy->clocks[1].id = "xfipll";
+	ret = devm_clk_bulk_get(&pdev->dev, MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
+	if (ret)
+		return ret;
+
+	xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(xfi_tphy->reset))
+		return PTR_ERR(xfi_tphy->reset);
+
+	xfi_tphy->da_war = of_property_read_bool(np, "mediatek,usxgmii-performance-errata");
+
+	phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, xfi_tphy);
+	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id mtk_xfi_tphy_match[] = {
+	{ .compatible = "mediatek,mt7988-xfi-tphy", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
+
+static struct platform_driver mtk_xfi_tphy_driver = {
+	.probe = mtk_xfi_tphy_probe,
+	.driver = {
+		.name = "mtk-xfi-tphy",
+		.of_match_table = mtk_xfi_tphy_match,
+	},
+};
+module_platform_driver(mtk_xfi_tphy_driver);
+
+MODULE_DESCRIPTION("MediaTek 10GE SerDes XFI T-PHY driver");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen@mediatek.com>");
+MODULE_LICENSE("GPL");

drivers/phy/phy-core.c

@@ -20,7 +20,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
-static struct class *phy_class;
+static void phy_release(struct device *dev);
+static const struct class phy_class = {
+	.name = "phy",
+	.dev_release = phy_release,
+};
+
 static struct dentry *phy_debugfs_root;
 static DEFINE_MUTEX(phy_provider_mutex);
 static LIST_HEAD(phy_provider_list);
@@ -753,7 +758,7 @@ struct phy *of_phy_simple_xlate(struct device *dev,
 	struct phy *phy;
 	struct class_dev_iter iter;
 
-	class_dev_iter_init(&iter, phy_class, NULL, NULL);
+	class_dev_iter_init(&iter, &phy_class, NULL, NULL);
 	while ((dev = class_dev_iter_next(&iter))) {
 		phy = to_phy(dev);
 		if (args->np != phy->dev.of_node)
@@ -1016,7 +1021,7 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
 	device_initialize(&phy->dev);
 	mutex_init(&phy->mutex);
 
-	phy->dev.class = phy_class;
+	phy->dev.class = &phy_class;
 	phy->dev.parent = dev;
 	phy->dev.of_node = node ?: dev->of_node;
 	phy->id = id;
@@ -1285,14 +1290,13 @@ static void phy_release(struct device *dev)
 
 static int __init phy_core_init(void)
 {
-	phy_class = class_create("phy");
-	if (IS_ERR(phy_class)) {
-		pr_err("failed to create phy class --> %ld\n",
-			PTR_ERR(phy_class));
-		return PTR_ERR(phy_class);
-	}
+	int err;
 
-	phy_class->dev_release = phy_release;
+	err = class_register(&phy_class);
+	if (err) {
+		pr_err("failed to register phy class");
+		return err;
+	}
 
 	phy_debugfs_root = debugfs_create_dir("phy", NULL);
 
@@ -1303,6 +1307,6 @@ device_initcall(phy_core_init);
 static void __exit phy_core_exit(void)
 {
 	debugfs_remove_recursive(phy_debugfs_root);
-	class_destroy(phy_class);
+	class_unregister(&phy_class);
 }
 module_exit(phy_core_exit);

drivers/phy/qualcomm/phy-qcom-edp.c

@@ -24,6 +24,7 @@
 
 #include "phy-qcom-qmp-dp-phy.h"
 #include "phy-qcom-qmp-qserdes-com-v4.h"
+#include "phy-qcom-qmp-qserdes-com-v6.h"
 
 /* EDP_PHY registers */
 #define DP_PHY_CFG                              0x0010
@@ -77,9 +78,20 @@ struct qcom_edp_swing_pre_emph_cfg {
 	const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
 };
 
+struct qcom_edp;
+
+struct phy_ver_ops {
+	int (*com_power_on)(const struct qcom_edp *edp);
+	int (*com_resetsm_cntrl)(const struct qcom_edp *edp);
+	int (*com_bias_en_clkbuflr)(const struct qcom_edp *edp);
+	int (*com_configure_pll)(const struct qcom_edp *edp);
+	int (*com_configure_ssc)(const struct qcom_edp *edp);
+};
+
 struct qcom_edp_phy_cfg {
 	bool is_edp;
 	const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
+	const struct phy_ver_ops *ver_ops;
 };
 
 struct qcom_edp {
@@ -174,18 +186,6 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
 };
 
-static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
-};
-
-static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
-	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
-};
-
-static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
-	.is_edp = true,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
-};
-
 static int qcom_edp_phy_init(struct phy *phy)
 {
 	struct qcom_edp *edp = phy_get_drvdata(phy);
@@ -204,8 +204,9 @@ static int qcom_edp_phy_init(struct phy *phy)
 	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
 	       edp->edp + DP_PHY_PD_CTL);
 
-	/* Turn on BIAS current for PHY/PLL */
-	writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+	ret = edp->cfg->ver_ops->com_bias_en_clkbuflr(edp);
+	if (ret)
+		return ret;
 
 	writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
 	msleep(20);
@@ -312,6 +313,84 @@ static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opt
 }
 
 static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
+{
+	return edp->cfg->ver_ops->com_configure_ssc(edp);
+}
+
+static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+{
+	return edp->cfg->ver_ops->com_configure_pll(edp);
+}
+
+static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 vco_div;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		vco_div = 0x1;
+		*pixel_freq = 1620000000UL / 2;
+		break;
+
+	case 2700:
+		vco_div = 0x1;
+		*pixel_freq = 2700000000UL / 2;
+		break;
+
+	case 5400:
+		vco_div = 0x2;
+		*pixel_freq = 5400000000UL / 4;
+		break;
+
+	case 8100:
+		vco_div = 0x0;
+		*pixel_freq = 8100000000UL / 6;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+	return 0;
+}
+
+static int qcom_edp_phy_power_on_v4(const struct qcom_edp *edp)
+{
+	u32 val;
+
+	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+	       edp->edp + DP_PHY_PD_CTL);
+	writel(0xfc, edp->edp + DP_PHY_MODE);
+
+	return readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+				     val, val & BIT(7), 5, 200);
+}
+
+static int qcom_edp_phy_com_resetsm_cntrl_v4(const struct qcom_edp *edp)
+{
+	u32 val;
+
+	writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+	return readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+				     val, val & BIT(0), 500, 10000);
+}
+
+static int qcom_edp_com_bias_en_clkbuflr_v4(const struct qcom_edp *edp)
+{
+	/* Turn on BIAS current for PHY/PLL */
+	writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+	return 0;
+}
+
+static int qcom_edp_com_configure_ssc_v4(const struct qcom_edp *edp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
 	u32 step1;
@@ -345,7 +424,7 @@ static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
 	return 0;
 }
 
-static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
 	u32 div_frac_start2_mode0;
@@ -431,30 +510,150 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
 	return 0;
 }
 
-static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
+	.com_power_on		= qcom_edp_phy_power_on_v4,
+	.com_resetsm_cntrl	= qcom_edp_phy_com_resetsm_cntrl_v4,
+	.com_bias_en_clkbuflr	= qcom_edp_com_bias_en_clkbuflr_v4,
+	.com_configure_pll	= qcom_edp_com_configure_pll_v4,
+	.com_configure_ssc	= qcom_edp_com_configure_ssc_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
+	.ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
+	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
+	.is_edp = true,
+	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+	.ver_ops = &qcom_edp_phy_ops_v4,
+};
+
+static int qcom_edp_phy_power_on_v6(const struct qcom_edp *edp)
+{
+	u32 val;
+
+	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+	       edp->edp + DP_PHY_PD_CTL);
+	writel(0xfc, edp->edp + DP_PHY_MODE);
+
+	return readl_poll_timeout(edp->pll + QSERDES_V6_COM_CMN_STATUS,
+				     val, val & BIT(7), 5, 200);
+}
+
+static int qcom_edp_phy_com_resetsm_cntrl_v6(const struct qcom_edp *edp)
+{
+	u32 val;
+
+	writel(0x20, edp->pll + QSERDES_V6_COM_RESETSM_CNTRL);
+
+	return readl_poll_timeout(edp->pll + QSERDES_V6_COM_C_READY_STATUS,
+				     val, val & BIT(0), 500, 10000);
+}
+
+static int qcom_edp_com_bias_en_clkbuflr_v6(const struct qcom_edp *edp)
+{
+	/* Turn on BIAS current for PHY/PLL */
+	writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+
+	return 0;
+}
+
+static int qcom_edp_com_configure_ssc_v6(const struct qcom_edp *edp)
 {
 	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
-	u32 vco_div;
+	u32 step1;
+	u32 step2;
 
 	switch (dp_opts->link_rate) {
 	case 1620:
-		vco_div = 0x1;
-		*pixel_freq = 1620000000UL / 2;
+	case 2700:
+	case 8100:
+		step1 = 0x92;
+		step2 = 0x01;
+		break;
+
+	case 5400:
+		step1 = 0x18;
+		step2 = 0x02;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(0x01, edp->pll + QSERDES_V6_COM_SSC_EN_CENTER);
+	writel(0x00, edp->pll + QSERDES_V6_COM_SSC_ADJ_PER1);
+	writel(0x36, edp->pll + QSERDES_V6_COM_SSC_PER1);
+	writel(0x01, edp->pll + QSERDES_V6_COM_SSC_PER2);
+	writel(step1, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0);
+	writel(step2, edp->pll + QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0);
+
+	return 0;
+}
+
+static int qcom_edp_com_configure_pll_v6(const struct qcom_edp *edp)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 div_frac_start2_mode0;
+	u32 div_frac_start3_mode0;
+	u32 dec_start_mode0;
+	u32 lock_cmp1_mode0;
+	u32 lock_cmp2_mode0;
+	u32 code1_mode0;
+	u32 code2_mode0;
+	u32 hsclk_sel;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		hsclk_sel = 0x5;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x37;
+		lock_cmp2_mode0 = 0x04;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0c;
 		break;
 
 	case 2700:
-		vco_div = 0x1;
-		*pixel_freq = 2700000000UL / 2;
+		hsclk_sel = 0x3;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x07;
+		lock_cmp2_mode0 = 0x07;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0c;
 		break;
 
 	case 5400:
-		vco_div = 0x2;
-		*pixel_freq = 5400000000UL / 4;
+		hsclk_sel = 0x1;
+		dec_start_mode0 = 0x46;
+		div_frac_start2_mode0 = 0x00;
+		div_frac_start3_mode0 = 0x05;
+		lock_cmp1_mode0 = 0x0f;
+		lock_cmp2_mode0 = 0x0e;
+		code1_mode0 = 0x97;
+		code2_mode0 = 0x10;
 		break;
 
 	case 8100:
-		vco_div = 0x0;
-		*pixel_freq = 8100000000UL / 6;
+		hsclk_sel = 0x0;
+		dec_start_mode0 = 0x34;
+		div_frac_start2_mode0 = 0xc0;
+		div_frac_start3_mode0 = 0x0b;
+		lock_cmp1_mode0 = 0x17;
+		lock_cmp2_mode0 = 0x15;
+		code1_mode0 = 0x71;
+		code2_mode0 = 0x0c;
 		break;
 
 	default:
@@ -462,33 +661,69 @@ static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel
 		return -EINVAL;
 	}
 
-	writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+	writel(0x01, edp->pll + QSERDES_V6_COM_SVS_MODE_CLK_SEL);
+	writel(0x0b, edp->pll + QSERDES_V6_COM_SYSCLK_EN_SEL);
+	writel(0x02, edp->pll + QSERDES_V6_COM_SYS_CLK_CTRL);
+	writel(0x0c, edp->pll + QSERDES_V6_COM_CLK_ENABLE1);
+	writel(0x06, edp->pll + QSERDES_V6_COM_SYSCLK_BUF_ENABLE);
+	writel(0x30, edp->pll + QSERDES_V6_COM_CLK_SELECT);
+	writel(hsclk_sel, edp->pll + QSERDES_V6_COM_HSCLK_SEL_1);
+	writel(0x07, edp->pll + QSERDES_V6_COM_PLL_IVCO);
+	writel(0x08, edp->pll + QSERDES_V6_COM_LOCK_CMP_EN);
+	writel(0x36, edp->pll + QSERDES_V6_COM_PLL_CCTRL_MODE0);
+	writel(0x16, edp->pll + QSERDES_V6_COM_PLL_RCTRL_MODE0);
+	writel(0x06, edp->pll + QSERDES_V6_COM_CP_CTRL_MODE0);
+	writel(dec_start_mode0, edp->pll + QSERDES_V6_COM_DEC_START_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_DIV_FRAC_START1_MODE0);
+	writel(div_frac_start2_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START2_MODE0);
+	writel(div_frac_start3_mode0, edp->pll + QSERDES_V6_COM_DIV_FRAC_START3_MODE0);
+	writel(0x12, edp->pll + QSERDES_V6_COM_CMN_CONFIG_1);
+	writel(0x3f, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_MAP);
+	writel(lock_cmp1_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP1_MODE0);
+	writel(lock_cmp2_mode0, edp->pll + QSERDES_V6_COM_LOCK_CMP2_MODE0);
+
+	writel(0x0a, edp->pll + QSERDES_V6_COM_BG_TIMER);
+	writel(0x14, edp->pll + QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0);
+	writel(0x00, edp->pll + QSERDES_V6_COM_VCO_TUNE_CTRL);
+	writel(0x1f, edp->pll + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN);
+	writel(0x0f, edp->pll + QSERDES_V6_COM_CORE_CLK_EN);
+	writel(0xa0, edp->pll + QSERDES_V6_COM_VCO_TUNE1_MODE0);
+	writel(0x03, edp->pll + QSERDES_V6_COM_VCO_TUNE2_MODE0);
+
+	writel(code1_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0);
+	writel(code2_mode0, edp->pll + QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0);
 
 	return 0;
 }
 
+static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
+	.com_power_on		= qcom_edp_phy_power_on_v6,
+	.com_resetsm_cntrl	= qcom_edp_phy_com_resetsm_cntrl_v6,
+	.com_bias_en_clkbuflr	= qcom_edp_com_bias_en_clkbuflr_v6,
+	.com_configure_pll	= qcom_edp_com_configure_pll_v6,
+	.com_configure_ssc	= qcom_edp_com_configure_ssc_v6,
+};
+
+static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
+	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+	.ver_ops = &qcom_edp_phy_ops_v6,
+};
+
 static int qcom_edp_phy_power_on(struct phy *phy)
 {
 	const struct qcom_edp *edp = phy_get_drvdata(phy);
 	u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
 	unsigned long pixel_freq;
 	u8 ldo_config = 0x0;
-	int timeout;
 	int ret;
 	u32 val;
 	u8 cfg1;
 
-	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
-	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
-	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
-	       edp->edp + DP_PHY_PD_CTL);
-	writel(0xfc, edp->edp + DP_PHY_MODE);
-
-	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
-				     val, val & BIT(7), 5, 200);
-	if (timeout)
-		return timeout;
-
+	ret = edp->cfg->ver_ops->com_power_on(edp);
+	if (ret)
+		return ret;
 
 	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
 		ldo_config = 0x1;
@@ -535,12 +770,9 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	writel(0x01, edp->edp + DP_PHY_CFG);
 	writel(0x09, edp->edp + DP_PHY_CFG);
 
-	writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
-
-	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
-				     val, val & BIT(0), 500, 10000);
-	if (timeout)
-		return timeout;
+	ret = edp->cfg->ver_ops->com_resetsm_cntrl(edp);
+	if (ret)
+		return ret;
 
 	writel(0x19, edp->edp + DP_PHY_CFG);
 	writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
@@ -880,6 +1112,7 @@ static const struct of_device_id qcom_edp_phy_match_table[] = {
 	{ .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, },
 	{ .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, },
 	{ .compatible = "qcom,sc8280xp-edp-phy", .data = &sc8280xp_edp_phy_cfg, },
+	{ .compatible = "qcom,x1e80100-dp-phy", .data = &x1e80100_phy_cfg, },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);

drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c

@@ -88,6 +88,12 @@ static const u32 pm8550b_init_tbl[NUM_TUNE_FIELDS] = {
 	[TUNE_USB2_PREEM] = 0x5,
 };
 
+static const u32 smb2360_init_tbl[NUM_TUNE_FIELDS] = {
+	[TUNE_IUSB2] = 0x5,
+	[TUNE_SQUELCH_U] = 0x3,
+	[TUNE_USB2_PREEM] = 0x2,
+};
+
 static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
 	.init_tbl	= pm8550b_init_tbl,
 	.init_tbl_num	= ARRAY_SIZE(pm8550b_init_tbl),
@@ -95,6 +101,13 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
 	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),
 };
 
+static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = {
+	.init_tbl	= smb2360_init_tbl,
+	.init_tbl_num	= ARRAY_SIZE(smb2360_init_tbl),
+	.vreg_list	= pm8550b_vreg_l,
+	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),
+};
+
 static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
 {
 	int num = rptr->cfg->num_vregs;
@@ -271,6 +284,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = {
 		.compatible = "qcom,pm8550b-eusb2-repeater",
 		.data = &pm8550b_eusb2_cfg,
 	},
+	{
+		.compatible = "qcom,smb2360-eusb2-repeater",
+		.data = &smb2360_eusb2_cfg,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table);

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -1382,6 +1382,13 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
 	{ 0x3f, 0xff, 0xff, 0xff }
 };
 
+static const u8 qmp_dp_v6_voltage_swing_hbr_rbr[4][4] = {
+	{ 0x27, 0x2f, 0x36, 0x3f },
+	{ 0x31, 0x3e, 0x3f, 0xff },
+	{ 0x36, 0x3f, 0xff, 0xff },
+	{ 0x3f, 0xff, 0xff, 0xff }
+};
+
 static const u8 qmp_dp_v6_pre_emphasis_hbr_rbr[4][4] = {
 	{ 0x20, 0x2d, 0x34, 0x3a },
 	{ 0x20, 0x2e, 0x35, 0xff },
@@ -2001,6 +2008,51 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 };
 
+static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
+	.serdes_tbl		= sm8550_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8550_usb3_serdes_tbl),
+	.tx_tbl			= sm8550_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8550_usb3_tx_tbl),
+	.rx_tbl			= sm8550_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8550_usb3_rx_tbl),
+	.pcs_tbl		= sm8550_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8550_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8550_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
+
+	.dp_serdes_tbl		= qmp_v6_dp_serdes_tbl,
+	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl),
+	.dp_tx_tbl		= qmp_v6_dp_tx_tbl,
+	.dp_tx_tbl_num		= ARRAY_SIZE(qmp_v6_dp_tx_tbl),
+
+	.serdes_tbl_rbr		= qmp_v6_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v6_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v6_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v6_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3),
+
+	.swing_hbr_rbr		= &qmp_dp_v6_voltage_swing_hbr_rbr,
+	.pre_emphasis_hbr_rbr	= &qmp_dp_v6_pre_emphasis_hbr_rbr,
+	.swing_hbr3_hbr2	= &qmp_dp_v5_voltage_swing_hbr3_hbr2,
+	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
+
+	.dp_aux_init		= qmp_v4_dp_aux_init,
+	.configure_dp_tx	= qmp_v4_configure_dp_tx,
+	.configure_dp_phy	= qmp_v4_configure_dp_phy,
+	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
+
+	.regs			= qmp_v6_usb3phy_regs_layout,
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+};
+
 static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2437,8 +2489,6 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
 	writel(0x20, qmp->dp_tx2 + cfg->regs[QPHY_TX_TX_EMP_POST1_LVL]);
 
 	return 0;
-
-	return 0;
 }
 
 /*
@@ -3631,7 +3681,7 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
 	},
 	{
 		.compatible = "qcom,sm8650-qmp-usb3-dp-phy",
-		.data = &sm8550_usb3dpphy_cfg,
+		.data = &sm8650_usb3dpphy_cfg,
 	},
 	{
 		.compatible = "qcom,x1e80100-qmp-usb3-dp-phy",

drivers/phy/qualcomm/phy-qcom-qmp-pcie.c

@@ -22,6 +22,8 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
@@ -2246,6 +2248,7 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_pcs_alt_tbl[] = {
 };
 
 static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_serdes_alt_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
@@ -2272,7 +2275,6 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0x97),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
@@ -2389,6 +2391,9 @@ struct qmp_phy_cfg {
 
 	/* QMP PHY pipe clock interface rate */
 	unsigned long pipe_clock_rate;
+
+	/* QMP PHY AUX clock interface rate */
+	unsigned long aux_clock_rate;
 };
 
 struct qmp_pcie {
@@ -2420,6 +2425,7 @@ struct qmp_pcie {
 	int mode;
 
 	struct clk_fixed_rate pipe_clk_fixed;
+	struct clk_fixed_rate aux_clk_fixed;
 };
 
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
@@ -3135,6 +3141,9 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
 
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 	.phy_status		= PHYSTATUS_4_20,
+
+	/* 20MHz PHY AUX Clock */
+	.aux_clock_rate		= 20000000,
 };
 
 static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = {
@@ -3192,6 +3201,9 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 	.phy_status		= PHYSTATUS_4_20,
 	.has_nocsr_reset	= true,
+
+	/* 20MHz PHY AUX Clock */
+	.aux_clock_rate		= 20000000,
 };
 
 static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
@@ -3222,6 +3234,9 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
 	.phy_status		= PHYSTATUS_4_20,
 	.has_nocsr_reset	= true,
+
+	/* 20MHz PHY AUX Clock */
+	.aux_clock_rate		= 20000000,
 };
 
 static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
@@ -3291,6 +3306,13 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x4_pciephy_cfg = {
 		.pcs_misc_num	= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
 	},
 
+	.tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+		.serdes		= sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
+		.serdes_num	= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
+		.pcs_misc	= sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl),
+	},
+
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -3664,7 +3686,7 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
 	struct clk_init_data init = { };
 	int ret;
 
-	ret = of_property_read_string(np, "clock-output-names", &init.name);
+	ret = of_property_read_string_index(np, "clock-output-names", 0, &init.name);
 	if (ret) {
 		dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np);
 		return ret;
@@ -3683,14 +3705,87 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
 
 	fixed->hw.init = &init;
 
-	ret = devm_clk_hw_register(qmp->dev, &fixed->hw);
+	return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
+
+/*
+ * Register a fixed rate PHY aux clock.
+ *
+ * The <s>_phy_aux_clksrc generated by PHY goes to the GCC that gate
+ * controls it. The <s>_phy_aux_clk coming out of the GCC is requested
+ * by the PHY driver for its operations.
+ * We register the <s>_phy_aux_clksrc here. The gcc driver takes care
+ * of assigning this <s>_phy_aux_clksrc as parent to <s>_phy_aux_clk.
+ * Below picture shows this relationship.
+ *
+ *         +---------------+
+ *         |   PHY block   |<<---------------------------------------------+
+ *         |               |                                               |
+ *         |   +-------+   |                      +-----+                  |
+ *   I/P---^-->|  PLL  |---^--->phy_aux_clksrc--->| GCC |--->phy_aux_clk---+
+ *    clk  |   +-------+   |                      +-----+
+ *         +---------------+
+ */
+static int phy_aux_clk_register(struct qmp_pcie *qmp, struct device_node *np)
+{
+	struct clk_fixed_rate *fixed = &qmp->aux_clk_fixed;
+	struct clk_init_data init = { };
+	int ret;
+
+	ret = of_property_read_string_index(np, "clock-output-names", 1, &init.name);
+	if (ret) {
+		dev_err(qmp->dev, "%pOFn: No clock-output-names index 1\n", np);
+		return ret;
+	}
+
+	init.ops = &clk_fixed_rate_ops;
+
+	fixed->fixed_rate = qmp->cfg->aux_clock_rate;
+	fixed->hw.init = &init;
+
+	return devm_clk_hw_register(qmp->dev, &fixed->hw);
+}
+
+static struct clk_hw *qmp_pcie_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct qmp_pcie *qmp = data;
+
+	/* Support legacy bindings */
+	if (!clkspec->args_count)
+		return &qmp->pipe_clk_fixed.hw;
+
+	switch (clkspec->args[0]) {
+	case QMP_PCIE_PIPE_CLK:
+		return &qmp->pipe_clk_fixed.hw;
+	case QMP_PCIE_PHY_AUX_CLK:
+		return &qmp->aux_clk_fixed.hw;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int qmp_pcie_register_clocks(struct qmp_pcie *qmp, struct device_node *np)
+{
+	int ret;
+
+	ret = phy_pipe_clk_register(qmp, np);
 	if (ret)
 		return ret;
 
-	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw);
+	if (qmp->cfg->aux_clock_rate) {
+		ret = phy_aux_clk_register(qmp, np);
 		if (ret)
 			return ret;
 
+		ret = of_clk_add_hw_provider(np, qmp_pcie_clk_hw_get, qmp);
+		if (ret)
+			return ret;
+	} else {
+		ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &qmp->pipe_clk_fixed.hw);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * Roll a devm action because the clock provider is the child node, but
 	 * the child node is not actually a device.
@@ -3899,7 +3994,7 @@ static int qmp_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_node_put;
 
-	ret = phy_pipe_clk_register(qmp, np);
+	ret = qmp_pcie_register_clocks(qmp, np);
 	if (ret)
 		goto err_node_put;
 

drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h

@@ -30,5 +30,9 @@
 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1		0x1f4
 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1		0x1fc
 #define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME		0x220
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4		0x240
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5		0x244
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6		0x248
+#define QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7		0x24c
 
 #endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h

@@ -25,12 +25,15 @@
 #define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4			0xf0
 #define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS			0xf4
 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL			0x178
+#define QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4			0x1ac
 #define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x1bc
 #define QSERDES_UFS_V6_RX_INTERFACE_MODE			0x1e0
 #define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3			0x1c4
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0			0x208
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1			0x20c
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2			0x210
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3			0x214
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4			0x218
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6			0x220
 #define QSERDES_UFS_V6_RX_MODE_RATE2_B3				0x238
 #define QSERDES_UFS_V6_RX_MODE_RATE2_B6				0x244
@@ -38,6 +41,9 @@
 #define QSERDES_UFS_V6_RX_MODE_RATE3_B4				0x260
 #define QSERDES_UFS_V6_RX_MODE_RATE3_B5				0x264
 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8				0x270
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B0				0x274
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B1				0x278
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B2				0x27c
 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3				0x280
 #define QSERDES_UFS_V6_RX_MODE_RATE4_B4				0x284
 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6				0x28c

drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

@@ -722,6 +722,38 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a),
 };
 
+static const struct qmp_phy_init_tbl sm8475_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x98),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x32),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x0f),
+};
+
+static const struct qmp_phy_init_tbl sm8475_ufsphy_g4_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x0b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+};
+
 static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
@@ -830,17 +862,20 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO_MODE1, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
@@ -848,17 +883,28 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = {
 };
 
 static const struct qmp_phy_init_tbl sm8650_ufsphy_tx[] = {
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x01),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
 };
 
 static const struct qmp_phy_init_tbl sm8650_ufsphy_rx[] = {
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x3e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xce),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B2, 0x18),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B4, 0x0f),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
@@ -866,23 +912,41 @@ static const struct qmp_phy_init_tbl sm8650_ufsphy_rx[] = {
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B0, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B1, 0x24),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B2, 0x20),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_SATURATION, 0x1f),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CTRL1, 0x94),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0, 0xfa),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30),
 };
 
 static const struct qmp_phy_init_tbl sm8650_ufsphy_pcs[] = {
-	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0xc1),
-	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S5, 0x12),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S6, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S7, 0x19),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_g4_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x13),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
-	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
-	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
-	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_g5_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x05),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4d),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e),
 };
 
 struct qmp_ufs_offsets {
@@ -1346,6 +1410,42 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
 	.regs			= ufsphy_v5_regs_layout,
 };
 
+static const struct qmp_phy_cfg sm8475_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets_v6,
+	.max_supported_gear	= UFS_HS_G4,
+
+	.tbls = {
+		.serdes		= sm8475_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8475_ufsphy_serdes),
+		.tx		= sm8550_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8550_ufsphy_tx),
+		.rx		= sm8550_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8550_ufsphy_rx),
+		.pcs		= sm8550_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8550_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8550_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_overlay[0] = {
+		.serdes		= sm8475_ufsphy_g4_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8475_ufsphy_g4_serdes),
+		.tx		= sm8550_ufsphy_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8550_ufsphy_g4_tx),
+		.rx		= sm8550_ufsphy_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8550_ufsphy_g4_rx),
+		.pcs		= sm8475_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8475_ufsphy_g4_pcs),
+		.max_gear	= UFS_HS_G4,
+	},
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= ufsphy_v6_regs_layout,
+};
+
 static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1407,6 +1507,17 @@ static const struct qmp_phy_cfg sm8650_ufsphy_cfg = {
 		.pcs		= sm8650_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_pcs),
 	},
+	.tbls_hs_overlay[0] = {
+		.pcs		= sm8650_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_g4_pcs),
+		.max_gear	= UFS_HS_G4,
+	},
+	.tbls_hs_overlay[1] = {
+		.pcs		= sm8650_ufsphy_g5_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_g5_pcs),
+		.max_gear	= UFS_HS_G5,
+	},
+
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= ufsphy_v6_regs_layout,
@@ -1941,6 +2052,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8450-qmp-ufs-phy",
 		.data = &sm8450_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sm8475-qmp-ufs-phy",
+		.data = &sm8475_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sm8550-qmp-ufs-phy",
 		.data = &sm8550_ufsphy_cfg,

drivers/phy/qualcomm/phy-qcom-qmp-usb.c

@@ -337,6 +337,29 @@ static const struct qmp_phy_init_tbl msm8996_usb3_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V2_PCS_POWER_STATE_CONFIG2, 0x08),
 };
 
+static const struct qmp_phy_init_tbl qdu1000_usb3_uniphy_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
+static const struct qmp_phy_init_tbl qdu1000_usb3_uniphy_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1, 0x6f),
+};
+
 static const struct qmp_phy_init_tbl qmp_v3_usb3_uniphy_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
 	QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
@@ -1400,6 +1423,27 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.regs			= qmp_v2_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg qdu1000_usb3_uniphy_cfg = {
+	.offsets		= &qmp_usb_offsets_v5,
+
+	.serdes_tbl		= sm8150_usb3_uniphy_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+	.tx_tbl			= sm8350_usb3_uniphy_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_tx_tbl),
+	.rx_tbl			= sm8350_usb3_uniphy_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
+	.pcs_tbl		= qdu1000_usb3_uniphy_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(qdu1000_usb3_uniphy_pcs_tbl),
+	.pcs_usb_tbl		= qdu1000_usb3_uniphy_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(qdu1000_usb3_uniphy_pcs_usb_tbl),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v4_usb3phy_regs_layout,
+	.pcs_usb_offset		= 0x1000,
+
+	.has_pwrdn_delay	= true,
+};
+
 static const struct qmp_phy_cfg sa8775p_usb3_uniphy_cfg = {
 	.offsets		= &qmp_usb_offsets_v5,
 
@@ -2202,6 +2246,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,qdu1000-qmp-usb3-uni-phy",
+		.data = &qdu1000_usb3_uniphy_cfg,
 	}, {
 		.compatible = "qcom,sa8775p-qmp-usb3-uni-phy",
 		.data = &sa8775p_usb3_uniphy_cfg,

drivers/phy/rockchip/Kconfig

@@ -116,3 +116,15 @@ config PHY_ROCKCHIP_USB
 	select GENERIC_PHY
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
+
+config PHY_ROCKCHIP_USBDP
+	tristate "Rockchip USBDP COMBO PHY Driver"
+	depends on ARCH_ROCKCHIP && OF
+	depends on TYPEC
+	select GENERIC_PHY
+	help
+	  Enable this to support the Rockchip USB3.0/DP combo PHY with
+	  Samsung IP block. This is required for USB3 support on RK3588.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-rockchip-usbdp

drivers/phy/rockchip/Makefile

@@ -12,3 +12,4 @@ obj-$(CONFIG_PHY_ROCKCHIP_SAMSUNG_HDPTX)	+= phy-rockchip-samsung-hdptx.o
 obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_USBDP)	+= phy-rockchip-usbdp.o

drivers/phy/rockchip/phy-rockchip-naneng-combphy.c

@@ -248,7 +248,7 @@ static int rockchip_combphy_exit(struct phy *phy)
 	return 0;
 }
 
-static const struct phy_ops rochchip_combphy_ops = {
+static const struct phy_ops rockchip_combphy_ops = {
 	.init = rockchip_combphy_init,
 	.exit = rockchip_combphy_exit,
 	.owner = THIS_MODULE,
@@ -364,7 +364,7 @@ static int rockchip_combphy_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+	priv->phy = devm_phy_create(dev, NULL, &rockchip_combphy_ops);
 	if (IS_ERR(priv->phy)) {
 		dev_err(dev, "failed to create combphy\n");
 		return PTR_ERR(priv->phy);

drivers/phy/rockchip/phy-rockchip-snps-pcie3.c

@@ -35,11 +35,17 @@
 #define RK3588_PCIE3PHY_GRF_CMN_CON0		0x0
 #define RK3588_PCIE3PHY_GRF_PHY0_STATUS1	0x904
 #define RK3588_PCIE3PHY_GRF_PHY1_STATUS1	0xa04
+#define RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1	0x1004
+#define RK3588_PCIE3PHY_GRF_PHY0_LN1_CON1	0x1104
+#define RK3588_PCIE3PHY_GRF_PHY1_LN0_CON1	0x2004
+#define RK3588_PCIE3PHY_GRF_PHY1_LN1_CON1	0x2104
 #define RK3588_SRAM_INIT_DONE(reg)		(reg & BIT(0))
 
 #define RK3588_BIFURCATION_LANE_0_1		BIT(0)
 #define RK3588_BIFURCATION_LANE_2_3		BIT(1)
 #define RK3588_LANE_AGGREGATION		BIT(2)
+#define RK3588_RX_CMN_REFCLK_MODE_EN		((BIT(7) << 16) |  BIT(7))
+#define RK3588_RX_CMN_REFCLK_MODE_DIS		(BIT(7) << 16)
 #define RK3588_PCIE1LN_SEL_EN			(GENMASK(1, 0) << 16)
 #define RK3588_PCIE30_PHY_MODE_EN		(GENMASK(2, 0) << 16)
 
@@ -60,6 +66,7 @@ struct rockchip_p3phy_priv {
 	int num_clks;
 	int num_lanes;
 	u32 lanes[4];
+	u32 rx_cmn_refclk_mode[4];
 };
 
 struct rockchip_p3phy_ops {
@@ -137,6 +144,19 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
 	u8 mode = RK3588_LANE_AGGREGATION; /* default */
 	int ret;
 
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY0_LN0_CON1,
+		     priv->rx_cmn_refclk_mode[0] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+		     RK3588_RX_CMN_REFCLK_MODE_DIS);
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY0_LN1_CON1,
+		     priv->rx_cmn_refclk_mode[1] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+		     RK3588_RX_CMN_REFCLK_MODE_DIS);
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY1_LN0_CON1,
+		     priv->rx_cmn_refclk_mode[2] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+		     RK3588_RX_CMN_REFCLK_MODE_DIS);
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_PHY1_LN1_CON1,
+		     priv->rx_cmn_refclk_mode[3] ? RK3588_RX_CMN_REFCLK_MODE_EN :
+		     RK3588_RX_CMN_REFCLK_MODE_DIS);
+
 	/* Deassert PCIe PMA output clamp mode */
 	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
 
@@ -182,7 +202,7 @@ static const struct rockchip_p3phy_ops rk3588_ops = {
 	.phy_init = rockchip_p3phy_rk3588_init,
 };
 
-static int rochchip_p3phy_init(struct phy *phy)
+static int rockchip_p3phy_init(struct phy *phy)
 {
 	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
 	int ret;
@@ -205,7 +225,7 @@ static int rochchip_p3phy_init(struct phy *phy)
 	return ret;
 }
 
-static int rochchip_p3phy_exit(struct phy *phy)
+static int rockchip_p3phy_exit(struct phy *phy)
 {
 	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
 
@@ -214,9 +234,9 @@ static int rochchip_p3phy_exit(struct phy *phy)
 	return 0;
 }
 
-static const struct phy_ops rochchip_p3phy_ops = {
-	.init = rochchip_p3phy_init,
-	.exit = rochchip_p3phy_exit,
+static const struct phy_ops rockchip_p3phy_ops = {
+	.init = rockchip_p3phy_init,
+	.exit = rockchip_p3phy_exit,
 	.set_mode = rockchip_p3phy_set_mode,
 	.owner = THIS_MODULE,
 };
@@ -275,7 +295,24 @@ static int rockchip_p3phy_probe(struct platform_device *pdev)
 		return priv->num_lanes;
 	}
 
-	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	ret = of_property_read_variable_u32_array(dev->of_node,
+						  "rockchip,rx-common-refclk-mode",
+						  priv->rx_cmn_refclk_mode, 1,
+						  ARRAY_SIZE(priv->rx_cmn_refclk_mode));
+	/*
+	 * if no rockchip,rx-common-refclk-mode, assume enabled for all lanes in
+	 * order to be DT backwards compatible. (Since HW reset val is enabled.)
+	 */
+	if (ret == -EINVAL) {
+		for (int i = 0; i < ARRAY_SIZE(priv->rx_cmn_refclk_mode); i++)
+			priv->rx_cmn_refclk_mode[i] = 1;
+	} else if (ret < 0) {
+		dev_err(dev, "failed to read rockchip,rx-common-refclk-mode property %d\n",
+			ret);
+		return ret;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rockchip_p3phy_ops);
 	if (IS_ERR(priv->phy)) {
 		dev_err(dev, "failed to create combphy\n");
 		return PTR_ERR(priv->phy);

drivers/phy/rockchip/phy-rockchip-usbdp.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USBDP Combo PHY with Samsung IP block driver
+ *
+ * Copyright (C) 2021-2024 Rockchip Electronics Co., Ltd
+ * Copyright (C) 2024 Collabora Ltd
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+/* USBDP PHY Register Definitions */
+#define UDPHY_PCS				0x4000
+#define UDPHY_PMA				0x8000
+
+/* VO0 GRF Registers */
+#define DP_SINK_HPD_CFG				BIT(11)
+#define DP_SINK_HPD_SEL				BIT(10)
+#define DP_AUX_DIN_SEL				BIT(9)
+#define DP_AUX_DOUT_SEL				BIT(8)
+#define DP_LANE_SEL_N(n)			GENMASK(2 * (n) + 1, 2 * (n))
+#define DP_LANE_SEL_ALL				GENMASK(7, 0)
+
+/* PMA CMN Registers */
+#define CMN_LANE_MUX_AND_EN_OFFSET		0x0288	/* cmn_reg00A2 */
+#define CMN_DP_LANE_MUX_N(n)			BIT((n) + 4)
+#define CMN_DP_LANE_EN_N(n)			BIT(n)
+#define CMN_DP_LANE_MUX_ALL			GENMASK(7, 4)
+#define CMN_DP_LANE_EN_ALL			GENMASK(3, 0)
+
+#define CMN_DP_LINK_OFFSET			0x28c	/* cmn_reg00A3 */
+#define CMN_DP_TX_LINK_BW			GENMASK(6, 5)
+#define CMN_DP_TX_LANE_SWAP_EN			BIT(2)
+
+#define CMN_SSC_EN_OFFSET			0x2d0	/* cmn_reg00B4 */
+#define CMN_ROPLL_SSC_EN			BIT(1)
+#define CMN_LCPLL_SSC_EN			BIT(0)
+
+#define CMN_ANA_LCPLL_DONE_OFFSET		0x0350	/* cmn_reg00D4 */
+#define CMN_ANA_LCPLL_LOCK_DONE			BIT(7)
+#define CMN_ANA_LCPLL_AFC_DONE			BIT(6)
+
+#define CMN_ANA_ROPLL_DONE_OFFSET		0x0354	/* cmn_reg00D5 */
+#define CMN_ANA_ROPLL_LOCK_DONE			BIT(1)
+#define CMN_ANA_ROPLL_AFC_DONE			BIT(0)
+
+#define CMN_DP_RSTN_OFFSET			0x038c	/* cmn_reg00E3 */
+#define CMN_DP_INIT_RSTN			BIT(3)
+#define CMN_DP_CMN_RSTN				BIT(2)
+#define CMN_CDR_WTCHDG_EN			BIT(1)
+#define CMN_CDR_WTCHDG_MSK_CDR_EN		BIT(0)
+
+#define TRSV_ANA_TX_CLK_OFFSET_N(n)		(0x854 + (n) * 0x800)	/* trsv_reg0215 */
+#define LN_ANA_TX_SER_TXCLK_INV			BIT(1)
+
+#define TRSV_LN0_MON_RX_CDR_DONE_OFFSET		0x0b84	/* trsv_reg02E1 */
+#define TRSV_LN0_MON_RX_CDR_LOCK_DONE		BIT(0)
+
+#define TRSV_LN2_MON_RX_CDR_DONE_OFFSET		0x1b84	/* trsv_reg06E1 */
+#define TRSV_LN2_MON_RX_CDR_LOCK_DONE		BIT(0)
+
+#define BIT_WRITEABLE_SHIFT			16
+#define PHY_AUX_DP_DATA_POL_NORMAL		0
+#define PHY_AUX_DP_DATA_POL_INVERT		1
+#define PHY_LANE_MUX_USB			0
+#define PHY_LANE_MUX_DP				1
+
+enum {
+	DP_BW_RBR,
+	DP_BW_HBR,
+	DP_BW_HBR2,
+	DP_BW_HBR3,
+};
+
+enum {
+	UDPHY_MODE_NONE		= 0,
+	UDPHY_MODE_USB		= BIT(0),
+	UDPHY_MODE_DP		= BIT(1),
+	UDPHY_MODE_DP_USB	= BIT(1) | BIT(0),
+};
+
+struct rk_udphy_grf_reg {
+	unsigned int	offset;
+	unsigned int	disable;
+	unsigned int	enable;
+};
+
+#define _RK_UDPHY_GEN_GRF_REG(offset, mask, disable, enable) \
+{\
+	offset, \
+	FIELD_PREP_CONST(mask, disable) | (mask << BIT_WRITEABLE_SHIFT), \
+	FIELD_PREP_CONST(mask, enable) | (mask << BIT_WRITEABLE_SHIFT), \
+}
+
+#define RK_UDPHY_GEN_GRF_REG(offset, bitend, bitstart, disable, enable) \
+	_RK_UDPHY_GEN_GRF_REG(offset, GENMASK(bitend, bitstart), disable, enable)
+
+struct rk_udphy_grf_cfg {
+	/* u2phy-grf */
+	struct rk_udphy_grf_reg	bvalid_phy_con;
+	struct rk_udphy_grf_reg	bvalid_grf_con;
+
+	/* usb-grf */
+	struct rk_udphy_grf_reg	usb3otg0_cfg;
+	struct rk_udphy_grf_reg	usb3otg1_cfg;
+
+	/* usbdpphy-grf */
+	struct rk_udphy_grf_reg	low_pwrn;
+	struct rk_udphy_grf_reg	rx_lfps;
+};
+
+struct rk_udphy_vogrf_cfg {
+	/* vo-grf */
+	struct rk_udphy_grf_reg hpd_trigger;
+	u32 dp_lane_reg;
+};
+
+struct rk_udphy_dp_tx_drv_ctrl {
+	u32 trsv_reg0204;
+	u32 trsv_reg0205;
+	u32 trsv_reg0206;
+	u32 trsv_reg0207;
+};
+
+struct rk_udphy_cfg {
+	unsigned int num_phys;
+	unsigned int phy_ids[2];
+	/* resets to be requested */
+	const char * const *rst_list;
+	int num_rsts;
+
+	struct rk_udphy_grf_cfg grfcfg;
+	struct rk_udphy_vogrf_cfg vogrfcfg[2];
+	const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg[4])[4];
+	const struct rk_udphy_dp_tx_drv_ctrl (*dp_tx_ctrl_cfg_typec[4])[4];
+};
+
+struct rk_udphy {
+	struct device *dev;
+	struct regmap *pma_regmap;
+	struct regmap *u2phygrf;
+	struct regmap *udphygrf;
+	struct regmap *usbgrf;
+	struct regmap *vogrf;
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+	struct mutex mutex; /* mutex to protect access to individual PHYs */
+
+	/* clocks and rests */
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct clk *refclk;
+	int num_rsts;
+	struct reset_control_bulk_data *rsts;
+
+	/* PHY status management */
+	bool flip;
+	bool mode_change;
+	u8 mode;
+	u8 status;
+
+	/* utilized for USB */
+	bool hs; /* flag for high-speed */
+
+	/* utilized for DP */
+	struct gpio_desc *sbu1_dc_gpio;
+	struct gpio_desc *sbu2_dc_gpio;
+	u32 lane_mux_sel[4];
+	u32 dp_lane_sel[4];
+	u32 dp_aux_dout_sel;
+	u32 dp_aux_din_sel;
+	bool dp_sink_hpd_sel;
+	bool dp_sink_hpd_cfg;
+	u8 bw;
+	int id;
+
+	bool dp_in_use;
+
+	/* PHY const config */
+	const struct rk_udphy_cfg *cfgs;
+
+	/* PHY devices */
+	struct phy *phy_dp;
+	struct phy *phy_u3;
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr[4][4] = {
+	/* voltage swing 0, pre-emphasis 0->3 */
+	{
+		{ 0x20, 0x10, 0x42, 0xe5 },
+		{ 0x26, 0x14, 0x42, 0xe5 },
+		{ 0x29, 0x18, 0x42, 0xe5 },
+		{ 0x2b, 0x1c, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 1, pre-emphasis 0->2 */
+	{
+		{ 0x23, 0x10, 0x42, 0xe7 },
+		{ 0x2a, 0x17, 0x43, 0xe7 },
+		{ 0x2b, 0x1a, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 2, pre-emphasis 0->1 */
+	{
+		{ 0x27, 0x10, 0x42, 0xe7 },
+		{ 0x2b, 0x17, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 3, pre-emphasis 0 */
+	{
+		{ 0x29, 0x10, 0x43, 0xe7 },
+	},
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_rbr_hbr_typec[4][4] = {
+	/* voltage swing 0, pre-emphasis 0->3 */
+	{
+		{ 0x20, 0x10, 0x42, 0xe5 },
+		{ 0x26, 0x14, 0x42, 0xe5 },
+		{ 0x29, 0x18, 0x42, 0xe5 },
+		{ 0x2b, 0x1c, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 1, pre-emphasis 0->2 */
+	{
+		{ 0x23, 0x10, 0x42, 0xe7 },
+		{ 0x2a, 0x17, 0x43, 0xe7 },
+		{ 0x2b, 0x1a, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 2, pre-emphasis 0->1 */
+	{
+		{ 0x27, 0x10, 0x43, 0x67 },
+		{ 0x2b, 0x17, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 3, pre-emphasis 0 */
+	{
+		{ 0x29, 0x10, 0x43, 0xe7 },
+	},
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr2[4][4] = {
+	/* voltage swing 0, pre-emphasis 0->3 */
+	{
+		{ 0x21, 0x10, 0x42, 0xe5 },
+		{ 0x26, 0x14, 0x42, 0xe5 },
+		{ 0x26, 0x16, 0x43, 0xe5 },
+		{ 0x2a, 0x19, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 1, pre-emphasis 0->2 */
+	{
+		{ 0x24, 0x10, 0x42, 0xe7 },
+		{ 0x2a, 0x17, 0x43, 0xe7 },
+		{ 0x2b, 0x1a, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 2, pre-emphasis 0->1 */
+	{
+		{ 0x28, 0x10, 0x42, 0xe7 },
+		{ 0x2b, 0x17, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 3, pre-emphasis 0 */
+	{
+		{ 0x28, 0x10, 0x43, 0xe7 },
+	},
+};
+
+static const struct rk_udphy_dp_tx_drv_ctrl rk3588_dp_tx_drv_ctrl_hbr3[4][4] = {
+	/* voltage swing 0, pre-emphasis 0->3 */
+	{
+		{ 0x21, 0x10, 0x42, 0xe5 },
+		{ 0x26, 0x14, 0x42, 0xe5 },
+		{ 0x26, 0x16, 0x43, 0xe5 },
+		{ 0x29, 0x18, 0x43, 0xe7 },
+	},
+
+	/* voltage swing 1, pre-emphasis 0->2 */
+	{
+		{ 0x24, 0x10, 0x42, 0xe7 },
+		{ 0x2a, 0x18, 0x43, 0xe7 },
+		{ 0x2b, 0x1b, 0x43, 0xe7 }
+	},
+
+	/* voltage swing 2, pre-emphasis 0->1 */
+	{
+		{ 0x27, 0x10, 0x42, 0xe7 },
+		{ 0x2b, 0x18, 0x43, 0xe7 }
+	},
+
+	/* voltage swing 3, pre-emphasis 0 */
+	{
+		{ 0x28, 0x10, 0x43, 0xe7 },
+	},
+};
+
+static const struct reg_sequence rk_udphy_24m_refclk_cfg[] = {
+	{0x0090, 0x68}, {0x0094, 0x68},
+	{0x0128, 0x24}, {0x012c, 0x44},
+	{0x0130, 0x3f}, {0x0134, 0x44},
+	{0x015c, 0xa9}, {0x0160, 0x71},
+	{0x0164, 0x71}, {0x0168, 0xa9},
+	{0x0174, 0xa9}, {0x0178, 0x71},
+	{0x017c, 0x71}, {0x0180, 0xa9},
+	{0x018c, 0x41}, {0x0190, 0x00},
+	{0x0194, 0x05}, {0x01ac, 0x2a},
+	{0x01b0, 0x17}, {0x01b4, 0x17},
+	{0x01b8, 0x2a}, {0x01c8, 0x04},
+	{0x01cc, 0x08}, {0x01d0, 0x08},
+	{0x01d4, 0x04}, {0x01d8, 0x20},
+	{0x01dc, 0x01}, {0x01e0, 0x09},
+	{0x01e4, 0x03}, {0x01f0, 0x29},
+	{0x01f4, 0x02}, {0x01f8, 0x02},
+	{0x01fc, 0x29}, {0x0208, 0x2a},
+	{0x020c, 0x17}, {0x0210, 0x17},
+	{0x0214, 0x2a}, {0x0224, 0x20},
+	{0x03f0, 0x0a}, {0x03f4, 0x07},
+	{0x03f8, 0x07}, {0x03fc, 0x0c},
+	{0x0404, 0x12}, {0x0408, 0x1a},
+	{0x040c, 0x1a}, {0x0410, 0x3f},
+	{0x0ce0, 0x68}, {0x0ce8, 0xd0},
+	{0x0cf0, 0x87}, {0x0cf8, 0x70},
+	{0x0d00, 0x70}, {0x0d08, 0xa9},
+	{0x1ce0, 0x68}, {0x1ce8, 0xd0},
+	{0x1cf0, 0x87}, {0x1cf8, 0x70},
+	{0x1d00, 0x70}, {0x1d08, 0xa9},
+	{0x0a3c, 0xd0}, {0x0a44, 0xd0},
+	{0x0a48, 0x01}, {0x0a4c, 0x0d},
+	{0x0a54, 0xe0}, {0x0a5c, 0xe0},
+	{0x0a64, 0xa8}, {0x1a3c, 0xd0},
+	{0x1a44, 0xd0}, {0x1a48, 0x01},
+	{0x1a4c, 0x0d}, {0x1a54, 0xe0},
+	{0x1a5c, 0xe0}, {0x1a64, 0xa8}
+};
+
+static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
+	{0x0830, 0x07}, {0x085c, 0x80},
+	{0x1030, 0x07}, {0x105c, 0x80},
+	{0x1830, 0x07}, {0x185c, 0x80},
+	{0x2030, 0x07}, {0x205c, 0x80},
+	{0x0228, 0x38}, {0x0104, 0x44},
+	{0x0248, 0x44}, {0x038c, 0x02},
+	{0x0878, 0x04}, {0x1878, 0x04},
+	{0x0898, 0x77}, {0x1898, 0x77},
+	{0x0054, 0x01}, {0x00e0, 0x38},
+	{0x0060, 0x24}, {0x0064, 0x77},
+	{0x0070, 0x76}, {0x0234, 0xe8},
+	{0x0af4, 0x15}, {0x1af4, 0x15},
+	{0x081c, 0xe5}, {0x181c, 0xe5},
+	{0x099c, 0x48}, {0x199c, 0x48},
+	{0x09a4, 0x07}, {0x09a8, 0x22},
+	{0x19a4, 0x07}, {0x19a8, 0x22},
+	{0x09b8, 0x3e}, {0x19b8, 0x3e},
+	{0x09e4, 0x02}, {0x19e4, 0x02},
+	{0x0a34, 0x1e}, {0x1a34, 0x1e},
+	{0x0a98, 0x2f}, {0x1a98, 0x2f},
+	{0x0c30, 0x0e}, {0x0c48, 0x06},
+	{0x1c30, 0x0e}, {0x1c48, 0x06},
+	{0x028c, 0x18}, {0x0af0, 0x00},
+	{0x1af0, 0x00}
+};
+
+static const struct reg_sequence rk_udphy_init_sequence[] = {
+	{0x0104, 0x44}, {0x0234, 0xe8},
+	{0x0248, 0x44}, {0x028c, 0x18},
+	{0x081c, 0xe5}, {0x0878, 0x00},
+	{0x0994, 0x1c}, {0x0af0, 0x00},
+	{0x181c, 0xe5}, {0x1878, 0x00},
+	{0x1994, 0x1c}, {0x1af0, 0x00},
+	{0x0428, 0x60}, {0x0d58, 0x33},
+	{0x1d58, 0x33}, {0x0990, 0x74},
+	{0x0d64, 0x17}, {0x08c8, 0x13},
+	{0x1990, 0x74}, {0x1d64, 0x17},
+	{0x18c8, 0x13}, {0x0d90, 0x40},
+	{0x0da8, 0x40}, {0x0dc0, 0x40},
+	{0x0dd8, 0x40}, {0x1d90, 0x40},
+	{0x1da8, 0x40}, {0x1dc0, 0x40},
+	{0x1dd8, 0x40}, {0x03c0, 0x30},
+	{0x03c4, 0x06}, {0x0e10, 0x00},
+	{0x1e10, 0x00}, {0x043c, 0x0f},
+	{0x0d2c, 0xff}, {0x1d2c, 0xff},
+	{0x0d34, 0x0f}, {0x1d34, 0x0f},
+	{0x08fc, 0x2a}, {0x0914, 0x28},
+	{0x0a30, 0x03}, {0x0e38, 0x03},
+	{0x0ecc, 0x27}, {0x0ed0, 0x22},
+	{0x0ed4, 0x26}, {0x18fc, 0x2a},
+	{0x1914, 0x28}, {0x1a30, 0x03},
+	{0x1e38, 0x03}, {0x1ecc, 0x27},
+	{0x1ed0, 0x22}, {0x1ed4, 0x26},
+	{0x0048, 0x0f}, {0x0060, 0x3c},
+	{0x0064, 0xf7}, {0x006c, 0x20},
+	{0x0070, 0x7d}, {0x0074, 0x68},
+	{0x0af4, 0x1a}, {0x1af4, 0x1a},
+	{0x0440, 0x3f}, {0x10d4, 0x08},
+	{0x20d4, 0x08}, {0x00d4, 0x30},
+	{0x0024, 0x6e},
+};
+
+static inline int rk_udphy_grfreg_write(struct regmap *base,
+					const struct rk_udphy_grf_reg *reg, bool en)
+{
+	return regmap_write(base, reg->offset, en ? reg->enable : reg->disable);
+}
+
+static int rk_udphy_clk_init(struct rk_udphy *udphy, struct device *dev)
+{
+	int i;
+
+	udphy->num_clks = devm_clk_bulk_get_all(dev, &udphy->clks);
+	if (udphy->num_clks < 1)
+		return -ENODEV;
+
+	/* used for configure phy reference clock frequency */
+	for (i = 0; i < udphy->num_clks; i++) {
+		if (!strncmp(udphy->clks[i].id, "refclk", 6)) {
+			udphy->refclk = udphy->clks[i].clk;
+			break;
+		}
+	}
+
+	if (!udphy->refclk)
+		return dev_err_probe(udphy->dev, -EINVAL, "no refclk found\n");
+
+	return 0;
+}
+
+static int rk_udphy_reset_assert_all(struct rk_udphy *udphy)
+{
+	return reset_control_bulk_assert(udphy->num_rsts, udphy->rsts);
+}
+
+static int rk_udphy_reset_deassert_all(struct rk_udphy *udphy)
+{
+	return reset_control_bulk_deassert(udphy->num_rsts, udphy->rsts);
+}
+
+static int rk_udphy_reset_deassert(struct rk_udphy *udphy, char *name)
+{
+	struct reset_control_bulk_data *list = udphy->rsts;
+	int idx;
+
+	for (idx = 0; idx < udphy->num_rsts; idx++) {
+		if (!strcmp(list[idx].id, name))
+			return reset_control_deassert(list[idx].rstc);
+	}
+
+	return -EINVAL;
+}
+
+static int rk_udphy_reset_init(struct rk_udphy *udphy, struct device *dev)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+	int idx;
+
+	udphy->num_rsts = cfg->num_rsts;
+	udphy->rsts = devm_kcalloc(dev, udphy->num_rsts,
+				   sizeof(*udphy->rsts), GFP_KERNEL);
+	if (!udphy->rsts)
+		return -ENOMEM;
+
+	for (idx = 0; idx < cfg->num_rsts; idx++)
+		udphy->rsts[idx].id = cfg->rst_list[idx];
+
+	return devm_reset_control_bulk_get_exclusive(dev, cfg->num_rsts,
+						     udphy->rsts);
+}
+
+static void rk_udphy_u3_port_disable(struct rk_udphy *udphy, u8 disable)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+	const struct rk_udphy_grf_reg *preg;
+
+	preg = udphy->id ? &cfg->grfcfg.usb3otg1_cfg : &cfg->grfcfg.usb3otg0_cfg;
+	rk_udphy_grfreg_write(udphy->usbgrf, preg, disable);
+}
+
+static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+
+	rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_phy_con, enable);
+	rk_udphy_grfreg_write(udphy->u2phygrf, &cfg->grfcfg.bvalid_grf_con, enable);
+}
+
+/*
+ * In usb/dp combo phy driver, here are 2 ways to mapping lanes.
+ *
+ * 1 Type-C Mapping table (DP_Alt_Mode V1.0b remove ABF pin mapping)
+ * ---------------------------------------------------------------------------
+ * Type-C Pin   B11-B10       A2-A3       A11-A10       B2-B3
+ * PHY Pad      ln0(tx/rx)    ln1(tx)     ln2(tx/rx)    ln3(tx)
+ * C/E(Normal)  dpln3         dpln2       dpln0         dpln1
+ * C/E(Flip  )  dpln0         dpln1       dpln3         dpln2
+ * D/F(Normal)  usbrx         usbtx       dpln0         dpln1
+ * D/F(Flip  )  dpln0         dpln1       usbrx         usbtx
+ * A(Normal  )  dpln3         dpln1       dpln2         dpln0
+ * A(Flip    )  dpln2         dpln0       dpln3         dpln1
+ * B(Normal  )  usbrx         usbtx       dpln1         dpln0
+ * B(Flip    )  dpln1         dpln0       usbrx         usbtx
+ * ---------------------------------------------------------------------------
+ *
+ * 2 Mapping the lanes in dtsi
+ * if all 4 lane assignment for dp function, define rockchip,dp-lane-mux = <x x x x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ *                        B11-B10       A2-A3       A11-A10       B2-B3
+ * rockchip,dp-lane-mux   ln0(tx/rx)    ln1(tx)     ln2(tx/rx)    ln3(tx)
+ * <0 1 2 3>              dpln0         dpln1       dpln2         dpln3
+ * <2 3 0 1>              dpln2         dpln3       dpln0         dpln1
+ * ---------------------------------------------------------------------------
+ * if 2 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = <x x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ *                        B11-B10       A2-A3       A11-A10       B2-B3
+ * rockchip,dp-lane-mux   ln0(tx/rx)    ln1(tx)     ln2(tx/rx)    ln3(tx)
+ * <0 1>                  dpln0         dpln1       usbrx         usbtx
+ * <2 3>                  usbrx         usbtx       dpln0         dpln1
+ * ---------------------------------------------------------------------------
+ */
+
+static void rk_udphy_dplane_select(struct rk_udphy *udphy)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+	u32 value = 0;
+
+	switch (udphy->mode) {
+	case UDPHY_MODE_DP:
+		value |= 2 << udphy->dp_lane_sel[2] * 2;
+		value |= 3 << udphy->dp_lane_sel[3] * 2;
+		fallthrough;
+
+	case UDPHY_MODE_DP_USB:
+		value |= 0 << udphy->dp_lane_sel[0] * 2;
+		value |= 1 << udphy->dp_lane_sel[1] * 2;
+		break;
+
+	case UDPHY_MODE_USB:
+		break;
+
+	default:
+		break;
+	}
+
+	regmap_write(udphy->vogrf, cfg->vogrfcfg[udphy->id].dp_lane_reg,
+		     ((DP_AUX_DIN_SEL | DP_AUX_DOUT_SEL | DP_LANE_SEL_ALL) << 16) |
+		     FIELD_PREP(DP_AUX_DIN_SEL, udphy->dp_aux_din_sel) |
+		     FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
+}
+
+static int rk_udphy_dplane_get(struct rk_udphy *udphy)
+{
+	int dp_lanes;
+
+	switch (udphy->mode) {
+	case UDPHY_MODE_DP:
+		dp_lanes = 4;
+		break;
+
+	case UDPHY_MODE_DP_USB:
+		dp_lanes = 2;
+		break;
+
+	case UDPHY_MODE_USB:
+	default:
+		dp_lanes = 0;
+		break;
+	}
+
+	return dp_lanes;
+}
+
+static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
+{
+	u32 val = 0;
+	int i;
+
+	for (i = 0; i < dp_lanes; i++)
+		val |= BIT(udphy->dp_lane_sel[i]);
+
+	regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, CMN_DP_LANE_EN_ALL,
+			   FIELD_PREP(CMN_DP_LANE_EN_ALL, val));
+
+	if (!dp_lanes)
+		regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+				   CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0));
+}
+
+static void rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+
+	udphy->dp_sink_hpd_sel = true;
+	udphy->dp_sink_hpd_cfg = hpd;
+
+	if (!udphy->dp_in_use)
+		return;
+
+	rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd);
+}
+
+static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
+{
+	if (udphy->flip) {
+		udphy->dp_lane_sel[0] = 0;
+		udphy->dp_lane_sel[1] = 1;
+		udphy->dp_lane_sel[2] = 3;
+		udphy->dp_lane_sel[3] = 2;
+		udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+		udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+		udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT;
+		udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT;
+		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1);
+		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
+	} else {
+		udphy->dp_lane_sel[0] = 2;
+		udphy->dp_lane_sel[1] = 3;
+		udphy->dp_lane_sel[2] = 1;
+		udphy->dp_lane_sel[3] = 0;
+		udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+		udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+		udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL;
+		udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL;
+		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
+		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
+	}
+
+	udphy->mode = UDPHY_MODE_DP_USB;
+}
+
+static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
+				 enum typec_orientation orien)
+{
+	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
+
+	mutex_lock(&udphy->mutex);
+
+	if (orien == TYPEC_ORIENTATION_NONE) {
+		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
+		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
+		/* unattached */
+		rk_udphy_usb_bvalid_enable(udphy, false);
+		goto unlock_ret;
+	}
+
+	udphy->flip = (orien == TYPEC_ORIENTATION_REVERSE) ? true : false;
+	rk_udphy_set_typec_default_mapping(udphy);
+	rk_udphy_usb_bvalid_enable(udphy, true);
+
+unlock_ret:
+	mutex_unlock(&udphy->mutex);
+	return 0;
+}
+
+static void rk_udphy_orien_switch_unregister(void *data)
+{
+	struct rk_udphy *udphy = data;
+
+	typec_switch_unregister(udphy->sw);
+}
+
+static int rk_udphy_setup_orien_switch(struct rk_udphy *udphy)
+{
+	struct typec_switch_desc sw_desc = { };
+
+	sw_desc.drvdata = udphy;
+	sw_desc.fwnode = dev_fwnode(udphy->dev);
+	sw_desc.set = rk_udphy_orien_sw_set;
+
+	udphy->sw = typec_switch_register(udphy->dev, &sw_desc);
+	if (IS_ERR(udphy->sw)) {
+		dev_err(udphy->dev, "Error register typec orientation switch: %ld\n",
+			PTR_ERR(udphy->sw));
+		return PTR_ERR(udphy->sw);
+	}
+
+	return devm_add_action_or_reset(udphy->dev,
+					rk_udphy_orien_switch_unregister, udphy);
+}
+
+static int rk_udphy_refclk_set(struct rk_udphy *udphy)
+{
+	unsigned long rate;
+	int ret;
+
+	/* configure phy reference clock */
+	rate = clk_get_rate(udphy->refclk);
+	dev_dbg(udphy->dev, "refclk freq %ld\n", rate);
+
+	switch (rate) {
+	case 24000000:
+		ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_24m_refclk_cfg,
+					     ARRAY_SIZE(rk_udphy_24m_refclk_cfg));
+		if (ret)
+			return ret;
+		break;
+
+	case 26000000:
+		/* register default is 26MHz */
+		ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_26m_refclk_cfg,
+					     ARRAY_SIZE(rk_udphy_26m_refclk_cfg));
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		dev_err(udphy->dev, "unsupported refclk freq %ld\n", rate);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk_udphy_status_check(struct rk_udphy *udphy)
+{
+	unsigned int val;
+	int ret;
+
+	/* LCPLL check */
+	if (udphy->mode & UDPHY_MODE_USB) {
+		ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_LCPLL_DONE_OFFSET,
+					       val, (val & CMN_ANA_LCPLL_AFC_DONE) &&
+					       (val & CMN_ANA_LCPLL_LOCK_DONE), 200, 100000);
+		if (ret) {
+			dev_err(udphy->dev, "cmn ana lcpll lock timeout\n");
+			/*
+			 * If earlier software (U-Boot) enabled USB once already
+			 * the PLL may have problems locking on the first try.
+			 * It will be successful on the second try, so for the
+			 * time being a -EPROBE_DEFER will solve the issue.
+			 *
+			 * This requires further investigation to understand the
+			 * root cause, especially considering that the driver is
+			 * asserting all reset lines at probe time.
+			 */
+			return -EPROBE_DEFER;
+		}
+
+		if (!udphy->flip) {
+			ret = regmap_read_poll_timeout(udphy->pma_regmap,
+						       TRSV_LN0_MON_RX_CDR_DONE_OFFSET, val,
+						       val & TRSV_LN0_MON_RX_CDR_LOCK_DONE,
+						       200, 100000);
+			if (ret)
+				dev_err(udphy->dev, "trsv ln0 mon rx cdr lock timeout\n");
+		} else {
+			ret = regmap_read_poll_timeout(udphy->pma_regmap,
+						       TRSV_LN2_MON_RX_CDR_DONE_OFFSET, val,
+						       val & TRSV_LN2_MON_RX_CDR_LOCK_DONE,
+						       200, 100000);
+			if (ret)
+				dev_err(udphy->dev, "trsv ln2 mon rx cdr lock timeout\n");
+		}
+	}
+
+	return 0;
+}
+
+static int rk_udphy_init(struct rk_udphy *udphy)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+	int ret;
+
+	rk_udphy_reset_assert_all(udphy);
+	usleep_range(10000, 11000);
+
+	/* enable rx lfps for usb */
+	if (udphy->mode & UDPHY_MODE_USB)
+		rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.rx_lfps, true);
+
+	/* Step 1: power on pma and deassert apb rstn */
+	rk_udphy_grfreg_write(udphy->udphygrf, &cfg->grfcfg.low_pwrn, true);
+
+	rk_udphy_reset_deassert(udphy, "pma_apb");
+	rk_udphy_reset_deassert(udphy, "pcs_apb");
+
+	/* Step 2: set init sequence and phy refclk */
+	ret = regmap_multi_reg_write(udphy->pma_regmap, rk_udphy_init_sequence,
+				     ARRAY_SIZE(rk_udphy_init_sequence));
+	if (ret) {
+		dev_err(udphy->dev, "init sequence set error %d\n", ret);
+		goto assert_resets;
+	}
+
+	ret = rk_udphy_refclk_set(udphy);
+	if (ret) {
+		dev_err(udphy->dev, "refclk set error %d\n", ret);
+		goto assert_resets;
+	}
+
+	/* Step 3: configure lane mux */
+	regmap_update_bits(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET,
+			   CMN_DP_LANE_MUX_ALL | CMN_DP_LANE_EN_ALL,
+			   FIELD_PREP(CMN_DP_LANE_MUX_N(3), udphy->lane_mux_sel[3]) |
+			   FIELD_PREP(CMN_DP_LANE_MUX_N(2), udphy->lane_mux_sel[2]) |
+			   FIELD_PREP(CMN_DP_LANE_MUX_N(1), udphy->lane_mux_sel[1]) |
+			   FIELD_PREP(CMN_DP_LANE_MUX_N(0), udphy->lane_mux_sel[0]) |
+			   FIELD_PREP(CMN_DP_LANE_EN_ALL, 0));
+
+	/* Step 4: deassert init rstn and wait for 200ns from datasheet */
+	if (udphy->mode & UDPHY_MODE_USB)
+		rk_udphy_reset_deassert(udphy, "init");
+
+	if (udphy->mode & UDPHY_MODE_DP) {
+		regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+				   CMN_DP_INIT_RSTN,
+				   FIELD_PREP(CMN_DP_INIT_RSTN, 0x1));
+	}
+
+	udelay(1);
+
+	/*  Step 5: deassert cmn/lane rstn */
+	if (udphy->mode & UDPHY_MODE_USB) {
+		rk_udphy_reset_deassert(udphy, "cmn");
+		rk_udphy_reset_deassert(udphy, "lane");
+	}
+
+	/*  Step 6: wait for lock done of pll */
+	ret = rk_udphy_status_check(udphy);
+	if (ret)
+		goto assert_resets;
+
+	return 0;
+
+assert_resets:
+	rk_udphy_reset_assert_all(udphy);
+	return ret;
+}
+
+static int rk_udphy_setup(struct rk_udphy *udphy)
+{
+	int ret;
+
+	ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
+	if (ret) {
+		dev_err(udphy->dev, "failed to enable clk\n");
+		return ret;
+	}
+
+	ret = rk_udphy_init(udphy);
+	if (ret) {
+		dev_err(udphy->dev, "failed to init combophy\n");
+		clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rk_udphy_disable(struct rk_udphy *udphy)
+{
+	clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
+	rk_udphy_reset_assert_all(udphy);
+}
+
+static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
+{
+	int ret, i, num_lanes;
+
+	num_lanes = device_property_count_u32(udphy->dev, "rockchip,dp-lane-mux");
+	if (num_lanes < 0) {
+		dev_dbg(udphy->dev, "no dp-lane-mux, following dp alt mode\n");
+		udphy->mode = UDPHY_MODE_USB;
+		return 0;
+	}
+
+	if (num_lanes != 2 && num_lanes != 4)
+		return dev_err_probe(udphy->dev, -EINVAL,
+				     "invalid number of lane mux\n");
+
+	ret = device_property_read_u32_array(udphy->dev, "rockchip,dp-lane-mux",
+					     udphy->dp_lane_sel, num_lanes);
+	if (ret)
+		return dev_err_probe(udphy->dev, ret, "get dp lane mux failed\n");
+
+	for (i = 0; i < num_lanes; i++) {
+		int j;
+
+		if (udphy->dp_lane_sel[i] > 3)
+			return dev_err_probe(udphy->dev, -EINVAL,
+					     "lane mux between 0 and 3, exceeding the range\n");
+
+		udphy->lane_mux_sel[udphy->dp_lane_sel[i]] = PHY_LANE_MUX_DP;
+
+		for (j = i + 1; j < num_lanes; j++) {
+			if (udphy->dp_lane_sel[i] == udphy->dp_lane_sel[j])
+				return dev_err_probe(udphy->dev, -EINVAL,
+						"set repeat lane mux value\n");
+		}
+	}
+
+	udphy->mode = UDPHY_MODE_DP;
+	if (num_lanes == 2) {
+		udphy->mode |= UDPHY_MODE_USB;
+		udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP);
+	}
+
+	return 0;
+}
+
+static int rk_udphy_get_initial_status(struct rk_udphy *udphy)
+{
+	int ret;
+	u32 value;
+
+	ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
+	if (ret) {
+		dev_err(udphy->dev, "failed to enable clk\n");
+		return ret;
+	}
+
+	rk_udphy_reset_deassert_all(udphy);
+
+	regmap_read(udphy->pma_regmap, CMN_LANE_MUX_AND_EN_OFFSET, &value);
+	if (FIELD_GET(CMN_DP_LANE_MUX_ALL, value) && FIELD_GET(CMN_DP_LANE_EN_ALL, value))
+		udphy->status = UDPHY_MODE_DP;
+	else
+		rk_udphy_disable(udphy);
+
+	return 0;
+}
+
+static int rk_udphy_parse_dt(struct rk_udphy *udphy)
+{
+	struct device *dev = udphy->dev;
+	struct device_node *np = dev_of_node(dev);
+	enum usb_device_speed maximum_speed;
+	int ret;
+
+	udphy->u2phygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,u2phy-grf");
+	if (IS_ERR(udphy->u2phygrf))
+		return dev_err_probe(dev, PTR_ERR(udphy->u2phygrf), "failed to get u2phy-grf\n");
+
+	udphy->udphygrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbdpphy-grf");
+	if (IS_ERR(udphy->udphygrf))
+		return dev_err_probe(dev, PTR_ERR(udphy->udphygrf), "failed to get usbdpphy-grf\n");
+
+	udphy->usbgrf = syscon_regmap_lookup_by_phandle(np, "rockchip,usb-grf");
+	if (IS_ERR(udphy->usbgrf))
+		return dev_err_probe(dev, PTR_ERR(udphy->usbgrf), "failed to get usb-grf\n");
+
+	udphy->vogrf = syscon_regmap_lookup_by_phandle(np, "rockchip,vo-grf");
+	if (IS_ERR(udphy->vogrf))
+		return dev_err_probe(dev, PTR_ERR(udphy->vogrf), "failed to get vo-grf\n");
+
+	ret = rk_udphy_parse_lane_mux_data(udphy);
+	if (ret)
+		return ret;
+
+	udphy->sbu1_dc_gpio = devm_gpiod_get_optional(dev, "sbu1-dc", GPIOD_OUT_LOW);
+	if (IS_ERR(udphy->sbu1_dc_gpio))
+		return PTR_ERR(udphy->sbu1_dc_gpio);
+
+	udphy->sbu2_dc_gpio = devm_gpiod_get_optional(dev, "sbu2-dc", GPIOD_OUT_LOW);
+	if (IS_ERR(udphy->sbu2_dc_gpio))
+		return PTR_ERR(udphy->sbu2_dc_gpio);
+
+	if (device_property_present(dev, "maximum-speed")) {
+		maximum_speed = usb_get_maximum_speed(dev);
+		udphy->hs = maximum_speed <= USB_SPEED_HIGH ? true : false;
+	}
+
+	ret = rk_udphy_clk_init(udphy, dev);
+	if (ret)
+		return ret;
+
+	return rk_udphy_reset_init(udphy, dev);
+}
+
+static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
+{
+	int ret;
+
+	if (!(udphy->mode & mode)) {
+		dev_info(udphy->dev, "mode 0x%02x is not support\n", mode);
+		return 0;
+	}
+
+	if (udphy->status == UDPHY_MODE_NONE) {
+		udphy->mode_change = false;
+		ret = rk_udphy_setup(udphy);
+		if (ret)
+			return ret;
+
+		if (udphy->mode & UDPHY_MODE_USB)
+			rk_udphy_u3_port_disable(udphy, false);
+	} else if (udphy->mode_change) {
+		udphy->mode_change = false;
+		udphy->status = UDPHY_MODE_NONE;
+		if (udphy->mode == UDPHY_MODE_DP)
+			rk_udphy_u3_port_disable(udphy, true);
+
+		rk_udphy_disable(udphy);
+		ret = rk_udphy_setup(udphy);
+		if (ret)
+			return ret;
+	}
+
+	udphy->status |= mode;
+
+	return 0;
+}
+
+static void rk_udphy_power_off(struct rk_udphy *udphy, u8 mode)
+{
+	if (!(udphy->mode & mode)) {
+		dev_info(udphy->dev, "mode 0x%02x is not support\n", mode);
+		return;
+	}
+
+	if (!udphy->status)
+		return;
+
+	udphy->status &= ~mode;
+
+	if (udphy->status == UDPHY_MODE_NONE)
+		rk_udphy_disable(udphy);
+}
+
+static int rk_udphy_dp_phy_init(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+	mutex_lock(&udphy->mutex);
+
+	udphy->dp_in_use = true;
+	rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg);
+
+	mutex_unlock(&udphy->mutex);
+
+	return 0;
+}
+
+static int rk_udphy_dp_phy_exit(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+	mutex_lock(&udphy->mutex);
+	udphy->dp_in_use = false;
+	mutex_unlock(&udphy->mutex);
+	return 0;
+}
+
+static int rk_udphy_dp_phy_power_on(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+	int ret, dp_lanes;
+
+	mutex_lock(&udphy->mutex);
+
+	dp_lanes = rk_udphy_dplane_get(udphy);
+	phy_set_bus_width(phy, dp_lanes);
+
+	ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
+	if (ret)
+		goto unlock;
+
+	rk_udphy_dplane_enable(udphy, dp_lanes);
+
+	rk_udphy_dplane_select(udphy);
+
+unlock:
+	mutex_unlock(&udphy->mutex);
+	/*
+	 * If data send by aux channel too fast after phy power on,
+	 * the aux may be not ready which will cause aux error. Adding
+	 * delay to avoid this issue.
+	 */
+	usleep_range(10000, 11000);
+	return ret;
+}
+
+static int rk_udphy_dp_phy_power_off(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+	mutex_lock(&udphy->mutex);
+	rk_udphy_dplane_enable(udphy, 0);
+	rk_udphy_power_off(udphy, UDPHY_MODE_DP);
+	mutex_unlock(&udphy->mutex);
+
+	return 0;
+}
+
+static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate)
+{
+	switch (link_rate) {
+	case 1620:
+	case 2700:
+	case 5400:
+	case 8100:
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rk_udphy_dp_phy_verify_config(struct rk_udphy *udphy,
+					 struct phy_configure_opts_dp *dp)
+{
+	int i, ret;
+
+	/* If changing link rate was required, verify it's supported. */
+	ret = rk_udphy_dp_phy_verify_link_rate(dp->link_rate);
+	if (ret)
+		return ret;
+
+	/* Verify lane count. */
+	switch (dp->lanes) {
+	case 1:
+	case 2:
+	case 4:
+		/* valid lane count. */
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * If changing voltages is required, check swing and pre-emphasis
+	 * levels, per-lane.
+	 */
+	if (dp->set_voltages) {
+		/* Lane count verified previously. */
+		for (i = 0; i < dp->lanes; i++) {
+			if (dp->voltage[i] > 3 || dp->pre[i] > 3)
+				return -EINVAL;
+
+			/*
+			 * Sum of voltage swing and pre-emphasis levels cannot
+			 * exceed 3.
+			 */
+			if (dp->voltage[i] + dp->pre[i] > 3)
+				return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void rk_udphy_dp_set_voltage(struct rk_udphy *udphy, u8 bw,
+				    u32 voltage, u32 pre, u32 lane)
+{
+	const struct rk_udphy_cfg *cfg = udphy->cfgs;
+	const struct rk_udphy_dp_tx_drv_ctrl (*dp_ctrl)[4];
+	u32 offset = 0x800 * lane;
+	u32 val;
+
+	if (udphy->mux)
+		dp_ctrl = cfg->dp_tx_ctrl_cfg_typec[bw];
+	else
+		dp_ctrl = cfg->dp_tx_ctrl_cfg[bw];
+
+	val = dp_ctrl[voltage][pre].trsv_reg0204;
+	regmap_write(udphy->pma_regmap, 0x0810 + offset, val);
+
+	val = dp_ctrl[voltage][pre].trsv_reg0205;
+	regmap_write(udphy->pma_regmap, 0x0814 + offset, val);
+
+	val = dp_ctrl[voltage][pre].trsv_reg0206;
+	regmap_write(udphy->pma_regmap, 0x0818 + offset, val);
+
+	val = dp_ctrl[voltage][pre].trsv_reg0207;
+	regmap_write(udphy->pma_regmap, 0x081c + offset, val);
+}
+
+static int rk_udphy_dp_phy_configure(struct phy *phy,
+				     union phy_configure_opts *opts)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+	struct phy_configure_opts_dp *dp = &opts->dp;
+	u32 i, val, lane;
+	int ret;
+
+	ret = rk_udphy_dp_phy_verify_config(udphy, dp);
+	if (ret)
+		return ret;
+
+	if (dp->set_rate) {
+		regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
+				   CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0));
+
+		switch (dp->link_rate) {
+		case 1620:
+			udphy->bw = DP_BW_RBR;
+			break;
+
+		case 2700:
+			udphy->bw = DP_BW_HBR;
+			break;
+
+		case 5400:
+			udphy->bw = DP_BW_HBR2;
+			break;
+
+		case 8100:
+			udphy->bw = DP_BW_HBR3;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+		regmap_update_bits(udphy->pma_regmap, CMN_DP_LINK_OFFSET, CMN_DP_TX_LINK_BW,
+				   FIELD_PREP(CMN_DP_TX_LINK_BW, udphy->bw));
+		regmap_update_bits(udphy->pma_regmap, CMN_SSC_EN_OFFSET, CMN_ROPLL_SSC_EN,
+				   FIELD_PREP(CMN_ROPLL_SSC_EN, dp->ssc));
+		regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET, CMN_DP_CMN_RSTN,
+				   FIELD_PREP(CMN_DP_CMN_RSTN, 0x1));
+
+		ret = regmap_read_poll_timeout(udphy->pma_regmap, CMN_ANA_ROPLL_DONE_OFFSET, val,
+					       FIELD_GET(CMN_ANA_ROPLL_LOCK_DONE, val) &&
+					       FIELD_GET(CMN_ANA_ROPLL_AFC_DONE, val),
+					       0, 1000);
+		if (ret) {
+			dev_err(udphy->dev, "ROPLL is not lock, set_rate failed\n");
+			return ret;
+		}
+	}
+
+	if (dp->set_voltages) {
+		for (i = 0; i < dp->lanes; i++) {
+			lane = udphy->dp_lane_sel[i];
+			switch (dp->link_rate) {
+			case 1620:
+			case 2700:
+				regmap_update_bits(udphy->pma_regmap,
+						   TRSV_ANA_TX_CLK_OFFSET_N(lane),
+						   LN_ANA_TX_SER_TXCLK_INV,
+						   FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV,
+						   udphy->lane_mux_sel[lane]));
+				break;
+
+			case 5400:
+			case 8100:
+				regmap_update_bits(udphy->pma_regmap,
+						   TRSV_ANA_TX_CLK_OFFSET_N(lane),
+						   LN_ANA_TX_SER_TXCLK_INV,
+						   FIELD_PREP(LN_ANA_TX_SER_TXCLK_INV, 0x0));
+				break;
+			}
+
+			rk_udphy_dp_set_voltage(udphy, udphy->bw, dp->voltage[i],
+						dp->pre[i], lane);
+		}
+	}
+
+	return 0;
+}
+
+static const struct phy_ops rk_udphy_dp_phy_ops = {
+	.init		= rk_udphy_dp_phy_init,
+	.exit		= rk_udphy_dp_phy_exit,
+	.power_on	= rk_udphy_dp_phy_power_on,
+	.power_off	= rk_udphy_dp_phy_power_off,
+	.configure	= rk_udphy_dp_phy_configure,
+	.owner		= THIS_MODULE,
+};
+
+static int rk_udphy_usb3_phy_init(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+	int ret = 0;
+
+	mutex_lock(&udphy->mutex);
+	/* DP only or high-speed, disable U3 port */
+	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) {
+		rk_udphy_u3_port_disable(udphy, true);
+		goto unlock;
+	}
+
+	ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB);
+
+unlock:
+	mutex_unlock(&udphy->mutex);
+	return ret;
+}
+
+static int rk_udphy_usb3_phy_exit(struct phy *phy)
+{
+	struct rk_udphy *udphy = phy_get_drvdata(phy);
+
+	mutex_lock(&udphy->mutex);
+	/* DP only or high-speed */
+	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs)
+		goto unlock;
+
+	rk_udphy_power_off(udphy, UDPHY_MODE_USB);
+
+unlock:
+	mutex_unlock(&udphy->mutex);
+	return 0;
+}
+
+static const struct phy_ops rk_udphy_usb3_phy_ops = {
+	.init		= rk_udphy_usb3_phy_init,
+	.exit		= rk_udphy_usb3_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
+				  struct typec_mux_state *state)
+{
+	struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
+	u8 mode;
+
+	mutex_lock(&udphy->mutex);
+
+	switch (state->mode) {
+	case TYPEC_DP_STATE_C:
+	case TYPEC_DP_STATE_E:
+		udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+		mode = UDPHY_MODE_DP;
+		break;
+
+	case TYPEC_DP_STATE_D:
+	default:
+		if (udphy->flip) {
+			udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+		} else {
+			udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+		}
+		mode = UDPHY_MODE_DP_USB;
+		break;
+	}
+
+	if (state->alt && state->alt->svid == USB_TYPEC_DP_SID) {
+		struct typec_displayport_data *data = state->data;
+
+		if (!data) {
+			rk_udphy_dp_hpd_event_trigger(udphy, false);
+		} else if (data->status & DP_STATUS_IRQ_HPD) {
+			rk_udphy_dp_hpd_event_trigger(udphy, false);
+			usleep_range(750, 800);
+			rk_udphy_dp_hpd_event_trigger(udphy, true);
+		} else if (data->status & DP_STATUS_HPD_STATE) {
+			if (udphy->mode != mode) {
+				udphy->mode = mode;
+				udphy->mode_change = true;
+			}
+			rk_udphy_dp_hpd_event_trigger(udphy, true);
+		} else {
+			rk_udphy_dp_hpd_event_trigger(udphy, false);
+		}
+	}
+
+	mutex_unlock(&udphy->mutex);
+	return 0;
+}
+
+static void rk_udphy_typec_mux_unregister(void *data)
+{
+	struct rk_udphy *udphy = data;
+
+	typec_mux_unregister(udphy->mux);
+}
+
+static int rk_udphy_setup_typec_mux(struct rk_udphy *udphy)
+{
+	struct typec_mux_desc mux_desc = {};
+
+	mux_desc.drvdata = udphy;
+	mux_desc.fwnode = dev_fwnode(udphy->dev);
+	mux_desc.set = rk_udphy_typec_mux_set;
+
+	udphy->mux = typec_mux_register(udphy->dev, &mux_desc);
+	if (IS_ERR(udphy->mux)) {
+		dev_err(udphy->dev, "Error register typec mux: %ld\n",
+			PTR_ERR(udphy->mux));
+		return PTR_ERR(udphy->mux);
+	}
+
+	return devm_add_action_or_reset(udphy->dev, rk_udphy_typec_mux_unregister,
+					udphy);
+}
+
+static const struct regmap_config rk_udphy_pma_regmap_cfg = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+	.max_register = 0x20dc,
+};
+
+static struct phy *rk_udphy_phy_xlate(struct device *dev, const struct of_phandle_args *args)
+{
+	struct rk_udphy *udphy = dev_get_drvdata(dev);
+
+	if (args->args_count == 0)
+		return ERR_PTR(-EINVAL);
+
+	switch (args->args[0]) {
+	case PHY_TYPE_USB3:
+		return udphy->phy_u3;
+	case PHY_TYPE_DP:
+		return udphy->phy_dp;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int rk_udphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	struct rk_udphy *udphy;
+	void __iomem *base;
+	int id, ret;
+
+	udphy = devm_kzalloc(dev, sizeof(*udphy), GFP_KERNEL);
+	if (!udphy)
+		return -ENOMEM;
+
+	udphy->cfgs = device_get_match_data(dev);
+	if (!udphy->cfgs)
+		return dev_err_probe(dev, -EINVAL, "missing match data\n");
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	/* find the phy-id from the io address */
+	udphy->id = -ENODEV;
+	for (id = 0; id < udphy->cfgs->num_phys; id++) {
+		if (res->start == udphy->cfgs->phy_ids[id]) {
+			udphy->id = id;
+			break;
+		}
+	}
+
+	if (udphy->id < 0)
+		return dev_err_probe(dev, -ENODEV, "no matching device found\n");
+
+	udphy->pma_regmap = devm_regmap_init_mmio(dev, base + UDPHY_PMA,
+						  &rk_udphy_pma_regmap_cfg);
+	if (IS_ERR(udphy->pma_regmap))
+		return PTR_ERR(udphy->pma_regmap);
+
+	udphy->dev = dev;
+	ret = rk_udphy_parse_dt(udphy);
+	if (ret)
+		return ret;
+
+	ret = rk_udphy_get_initial_status(udphy);
+	if (ret)
+		return ret;
+
+	mutex_init(&udphy->mutex);
+	platform_set_drvdata(pdev, udphy);
+
+	if (device_property_present(dev, "orientation-switch")) {
+		ret = rk_udphy_setup_orien_switch(udphy);
+		if (ret)
+			return ret;
+	}
+
+	if (device_property_present(dev, "mode-switch")) {
+		ret = rk_udphy_setup_typec_mux(udphy);
+		if (ret)
+			return ret;
+	}
+
+	udphy->phy_u3 = devm_phy_create(dev, dev->of_node, &rk_udphy_usb3_phy_ops);
+	if (IS_ERR(udphy->phy_u3)) {
+		ret = PTR_ERR(udphy->phy_u3);
+		return dev_err_probe(dev, ret, "failed to create USB3 phy\n");
+	}
+	phy_set_drvdata(udphy->phy_u3, udphy);
+
+	udphy->phy_dp = devm_phy_create(dev, dev->of_node, &rk_udphy_dp_phy_ops);
+	if (IS_ERR(udphy->phy_dp)) {
+		ret = PTR_ERR(udphy->phy_dp);
+		return dev_err_probe(dev, ret, "failed to create DP phy\n");
+	}
+	phy_set_bus_width(udphy->phy_dp, rk_udphy_dplane_get(udphy));
+	udphy->phy_dp->attrs.max_link_rate = 8100;
+	phy_set_drvdata(udphy->phy_dp, udphy);
+
+	phy_provider = devm_of_phy_provider_register(dev, rk_udphy_phy_xlate);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		return dev_err_probe(dev, ret, "failed to register phy provider\n");
+	}
+
+	return 0;
+}
+
+static int __maybe_unused rk_udphy_resume(struct device *dev)
+{
+	struct rk_udphy *udphy = dev_get_drvdata(dev);
+
+	if (udphy->dp_sink_hpd_sel)
+		rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rk_udphy_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, rk_udphy_resume)
+};
+
+static const char * const rk_udphy_rst_list[] = {
+	"init", "cmn", "lane", "pcs_apb", "pma_apb"
+};
+
+static const struct rk_udphy_cfg rk3588_udphy_cfgs = {
+	.num_phys = 2,
+	.phy_ids = {
+		0xfed80000,
+		0xfed90000,
+	},
+	.num_rsts = ARRAY_SIZE(rk_udphy_rst_list),
+	.rst_list = rk_udphy_rst_list,
+	.grfcfg	= {
+		/* u2phy-grf */
+		.bvalid_phy_con		= RK_UDPHY_GEN_GRF_REG(0x0008, 1, 0, 0x2, 0x3),
+		.bvalid_grf_con		= RK_UDPHY_GEN_GRF_REG(0x0010, 3, 2, 0x2, 0x3),
+
+		/* usb-grf */
+		.usb3otg0_cfg		= RK_UDPHY_GEN_GRF_REG(0x001c, 15, 0, 0x1100, 0x0188),
+		.usb3otg1_cfg		= RK_UDPHY_GEN_GRF_REG(0x0034, 15, 0, 0x1100, 0x0188),
+
+		/* usbdpphy-grf */
+		.low_pwrn		= RK_UDPHY_GEN_GRF_REG(0x0004, 13, 13, 0, 1),
+		.rx_lfps		= RK_UDPHY_GEN_GRF_REG(0x0004, 14, 14, 0, 1),
+	},
+	.vogrfcfg = {
+		{
+			.hpd_trigger	= RK_UDPHY_GEN_GRF_REG(0x0000, 11, 10, 1, 3),
+			.dp_lane_reg	= 0x0000,
+		},
+		{
+			.hpd_trigger	= RK_UDPHY_GEN_GRF_REG(0x0008, 11, 10, 1, 3),
+			.dp_lane_reg	= 0x0008,
+		},
+	},
+	.dp_tx_ctrl_cfg = {
+		rk3588_dp_tx_drv_ctrl_rbr_hbr,
+		rk3588_dp_tx_drv_ctrl_rbr_hbr,
+		rk3588_dp_tx_drv_ctrl_hbr2,
+		rk3588_dp_tx_drv_ctrl_hbr3,
+	},
+	.dp_tx_ctrl_cfg_typec = {
+		rk3588_dp_tx_drv_ctrl_rbr_hbr_typec,
+		rk3588_dp_tx_drv_ctrl_rbr_hbr_typec,
+		rk3588_dp_tx_drv_ctrl_hbr2,
+		rk3588_dp_tx_drv_ctrl_hbr3,
+	},
+};
+
+static const struct of_device_id rk_udphy_dt_match[] = {
+	{
+		.compatible = "rockchip,rk3588-usbdp-phy",
+		.data = &rk3588_udphy_cfgs
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rk_udphy_dt_match);
+
+static struct platform_driver rk_udphy_driver = {
+	.probe		= rk_udphy_probe,
+	.driver		= {
+		.name	= "rockchip-usbdp-phy",
+		.of_match_table = rk_udphy_dt_match,
+		.pm = &rk_udphy_pm_ops,
+	},
+};
+module_platform_driver(rk_udphy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_AUTHOR("Zhang Yubing <yubing.zhang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USBDP Combo PHY driver");
+MODULE_LICENSE("GPL");

drivers/phy/samsung/Makefile

@@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_EXYNOS_PCIE)		+= phy-exynos-pcie.o
 obj-$(CONFIG_PHY_SAMSUNG_UFS)		+= phy-exynos-ufs.o
+phy-exynos-ufs-y			+= phy-gs101-ufs.o
 phy-exynos-ufs-y			+= phy-samsung-ufs.o
 phy-exynos-ufs-y			+= phy-exynos7-ufs.o
 phy-exynos-ufs-y			+= phy-exynosautov9-ufs.o

drivers/phy/samsung/phy-exynos7-ufs.c

@@ -82,4 +82,5 @@ const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
 	.clk_list = exynos7_ufs_phy_clks,
 	.num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks),
 	.cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+	.wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
 };

drivers/phy/samsung/phy-exynosautov9-ufs.c

@@ -71,4 +71,5 @@ const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = {
 	.clk_list = exynosautov9_ufs_phy_clks,
 	.num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks),
 	.cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+	.wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
 };

drivers/phy/samsung/phy-fsd-ufs.c

@@ -60,4 +60,5 @@ const struct samsung_ufs_phy_drvdata fsd_ufs_phy = {
 	.clk_list = fsd_ufs_phy_clks,
 	.num_clks = ARRAY_SIZE(fsd_ufs_phy_clks),
 	.cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+	.wait_for_cdr = samsung_ufs_phy_wait_for_lock_acq,
 };

drivers/phy/samsung/phy-gs101-ufs.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for Google Tensor gs101 SoC
+ *
+ * Copyright (C) 2024 Linaro Ltd
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ */
+
+#include "phy-samsung-ufs.h"
+
+#define TENSOR_GS101_PHY_CTRL		0x3ec8
+#define TENSOR_GS101_PHY_CTRL_MASK	0x1
+#define TENSOR_GS101_PHY_CTRL_EN	BIT(0)
+#define PHY_GS101_LANE_OFFSET		0x200
+#define TRSV_REG338			0x338
+#define LN0_MON_RX_CAL_DONE		BIT(3)
+#define TRSV_REG339			0x339
+#define LN0_MON_RX_CDR_FLD_CK_MODE_DONE BIT(3)
+#define TRSV_REG222			0x222
+#define LN0_OVRD_RX_CDR_EN		BIT(4)
+#define LN0_RX_CDR_EN			BIT(3)
+
+#define PHY_PMA_TRSV_ADDR(reg, lane)	(PHY_APB_ADDR((reg) + \
+					((lane) * PHY_GS101_LANE_OFFSET)))
+
+#define PHY_TRSV_REG_CFG_GS101(o, v, d) \
+	PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_GS101_LANE_OFFSET)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg tensor_gs101_pre_init_cfg[] = {
+	PHY_COMN_REG_CFG(0x43, 0x10,  PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x3C, 0x14,  PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x46, 0x48,  PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x200, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x201, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x202, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x203, 0x0a, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x204, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x205, 0x11, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x207, 0x0c, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2E1, 0xc0, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x22D, 0xb8, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x234, 0x60, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x238, 0x13, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x239, 0x48, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23A, 0x01, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23B, 0x25, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23C, 0x2a, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23D, 0x01, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23E, 0x13, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x23F, 0x13, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x240, 0x4a, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x243, 0x40, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x244, 0x02, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x25D, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x25E, 0x3f, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x25F, 0xff, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x273, 0x33, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x274, 0x50, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x284, 0x02, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x285, 0x02, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2A2, 0x04, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x25D, 0x01, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2FA, 0x01, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x286, 0x03, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x287, 0x03, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x288, 0x03, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x289, 0x03, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2B3, 0x04, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2B6, 0x0b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2B7, 0x0b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2B8, 0x0b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2B9, 0x0b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2BA, 0x0b, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2BB, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2BC, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2BD, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x29E, 0x06, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2E4, 0x1a, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2ED, 0x25, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x269, 0x1a, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x2F4, 0x2f, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x34B, 0x01, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x34C, 0x23, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x34D, 0x23, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x34E, 0x45, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x34F, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x350, 0x31, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x351, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x352, 0x02, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x353, 0x00, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x354, 0x01, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x43, 0x18, PWR_MODE_ANY),
+	PHY_COMN_REG_CFG(0x43, 0x00, PWR_MODE_ANY),
+	END_UFS_PHY_CFG,
+};
+
+static const struct samsung_ufs_phy_cfg tensor_gs101_pre_pwr_hs_config[] = {
+	PHY_TRSV_REG_CFG_GS101(0x369, 0x11, PWR_MODE_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x246, 0x03, PWR_MODE_ANY),
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg tensor_gs101_post_pwr_hs_config[] = {
+	PHY_COMN_REG_CFG(0x8, 0x60, PWR_MODE_PWM_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x222, 0x08, PWR_MODE_PWM_ANY),
+	PHY_TRSV_REG_CFG_GS101(0x246, 0x01, PWR_MODE_ANY),
+	END_UFS_PHY_CFG,
+};
+
+static const struct samsung_ufs_phy_cfg *tensor_gs101_ufs_phy_cfgs[CFG_TAG_MAX] = {
+	[CFG_PRE_INIT]		= tensor_gs101_pre_init_cfg,
+	[CFG_PRE_PWR_HS]	= tensor_gs101_pre_pwr_hs_config,
+	[CFG_POST_PWR_HS]	= tensor_gs101_post_pwr_hs_config,
+};
+
+static const char * const tensor_gs101_ufs_phy_clks[] = {
+	"ref_clk",
+};
+
+static int gs101_phy_wait_for_calibration(struct phy *phy, u8 lane)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	const unsigned int timeout_us = 40000;
+	const unsigned int sleep_us = 40;
+	u32 val;
+	u32 off;
+	int err;
+
+	off = PHY_PMA_TRSV_ADDR(TRSV_REG338, lane);
+
+	err = readl_poll_timeout(ufs_phy->reg_pma + off,
+				 val, (val & LN0_MON_RX_CAL_DONE),
+				 sleep_us, timeout_us);
+
+	if (err) {
+		dev_err(ufs_phy->dev,
+			"failed to get phy cal done %d\n", err);
+	}
+
+	return err;
+}
+
+#define DELAY_IN_US	40
+#define RETRY_CNT	100
+static int gs101_phy_wait_for_cdr_lock(struct phy *phy, u8 lane)
+{
+	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+	u32 val;
+	int i;
+
+	for (i = 0; i < RETRY_CNT; i++) {
+		udelay(DELAY_IN_US);
+		val = readl(ufs_phy->reg_pma +
+			    PHY_PMA_TRSV_ADDR(TRSV_REG339, lane));
+
+		if (val & LN0_MON_RX_CDR_FLD_CK_MODE_DONE)
+			return 0;
+
+		udelay(DELAY_IN_US);
+		/* Override and enable clock data recovery */
+		writel(LN0_OVRD_RX_CDR_EN, ufs_phy->reg_pma +
+		       PHY_PMA_TRSV_ADDR(TRSV_REG222, lane));
+		writel(LN0_OVRD_RX_CDR_EN | LN0_RX_CDR_EN,
+		       ufs_phy->reg_pma + PHY_PMA_TRSV_ADDR(TRSV_REG222, lane));
+	}
+	dev_err(ufs_phy->dev, "failed to get cdr lock\n");
+	return -ETIMEDOUT;
+}
+
+const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy = {
+	.cfgs = tensor_gs101_ufs_phy_cfgs,
+	.isol = {
+		.offset = TENSOR_GS101_PHY_CTRL,
+		.mask = TENSOR_GS101_PHY_CTRL_MASK,
+		.en = TENSOR_GS101_PHY_CTRL_EN,
+	},
+	.clk_list = tensor_gs101_ufs_phy_clks,
+	.num_clks = ARRAY_SIZE(tensor_gs101_ufs_phy_clks),
+	.wait_for_cal = gs101_phy_wait_for_calibration,
+	.wait_for_cdr = gs101_phy_wait_for_cdr_lock,
+};

drivers/phy/samsung/phy-samsung-ufs.c

@@ -13,11 +13,11 @@
 #include <linux/of.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
-#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-pmu.h>
 
 #include "phy-samsung-ufs.h"
 
@@ -45,7 +45,7 @@ static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
 	}
 }
 
-static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane)
 {
 	struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
 	const unsigned int timeout_us = 100000;
@@ -97,8 +97,21 @@ static int samsung_ufs_phy_calibrate(struct phy *phy)
 		}
 	}
 
-	if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
-		err = samsung_ufs_phy_wait_for_lock_acq(phy);
+	for_each_phy_lane(ufs_phy, i) {
+		if (ufs_phy->ufs_phy_state == CFG_PRE_INIT &&
+		    ufs_phy->drvdata->wait_for_cal) {
+			err = ufs_phy->drvdata->wait_for_cal(phy, i);
+			if (err)
+				goto out;
+		}
+
+		if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS &&
+		    ufs_phy->drvdata->wait_for_cdr) {
+			err = ufs_phy->drvdata->wait_for_cdr(phy, i);
+			if (err)
+				goto out;
+		}
+	}
 
 	/**
 	 * In Samsung ufshci, PHY need to be calibrated at different
@@ -255,8 +268,8 @@ static int samsung_ufs_phy_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	phy->reg_pmu = syscon_regmap_lookup_by_phandle(
-				dev->of_node, "samsung,pmu-syscon");
+	phy->reg_pmu = exynos_get_pmu_regmap_by_phandle(dev->of_node,
+							"samsung,pmu-syscon");
 	if (IS_ERR(phy->reg_pmu)) {
 		err = PTR_ERR(phy->reg_pmu);
 		dev_err(dev, "failed syscon remap for pmu\n");
@@ -302,6 +315,9 @@ static int samsung_ufs_phy_probe(struct platform_device *pdev)
 
 static const struct of_device_id samsung_ufs_phy_match[] = {
 	{
+		.compatible = "google,gs101-ufs-phy",
+		.data = &tensor_gs101_ufs_phy,
+	}, {
 		.compatible = "samsung,exynos7-ufs-phy",
 		.data = &exynos7_ufs_phy,
 	}, {

drivers/phy/samsung/phy-samsung-ufs.h

@@ -112,6 +112,9 @@ struct samsung_ufs_phy_drvdata {
 	const char * const *clk_list;
 	int num_clks;
 	u32 cdr_lock_status_offset;
+	/* SoC's specific operations */
+	int (*wait_for_cal)(struct phy *phy, u8 lane);
+	int (*wait_for_cdr)(struct phy *phy, u8 lane);
 };
 
 struct samsung_ufs_phy {
@@ -139,8 +142,11 @@ static inline void samsung_ufs_phy_ctrl_isol(
 			   phy->isol.mask, isol ? 0 : phy->isol.en);
 }
 
+int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy, u8 lane);
+
 extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy;
 extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy;
 extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy;
+extern const struct samsung_ufs_phy_drvdata tensor_gs101_ufs_phy;
 
 #endif /* _PHY_SAMSUNG_UFS_ */

drivers/phy/xilinx/phy-zynqmp.c

@@ -995,15 +995,13 @@ static int xpsgtr_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int xpsgtr_remove(struct platform_device *pdev)
+static void xpsgtr_remove(struct platform_device *pdev)
 {
 	struct xpsgtr_dev *gtr_dev = platform_get_drvdata(pdev);
 
 	pm_runtime_disable(gtr_dev->dev);
 	pm_runtime_put_noidle(gtr_dev->dev);
 	pm_runtime_set_suspended(gtr_dev->dev);
-
-	return 0;
 }
 
 static const struct of_device_id xpsgtr_of_match[] = {
@@ -1015,7 +1013,7 @@ MODULE_DEVICE_TABLE(of, xpsgtr_of_match);
 
 static struct platform_driver xpsgtr_driver = {
 	.probe = xpsgtr_probe,
-	.remove	= xpsgtr_remove,
+	.remove_new = xpsgtr_remove,
 	.driver = {
 		.name = "xilinx-psgtr",
 		.of_match_table	= xpsgtr_of_match,

include/dt-bindings/phy/phy-qcom-qmp.h

@@ -17,4 +17,8 @@
 #define QMP_USB43DP_USB3_PHY		0
 #define QMP_USB43DP_DP_PHY		1
 
+/* QMP PCIE PHYs */
+#define QMP_PCIE_PIPE_CLK		0
+#define QMP_PCIE_PHY_AUX_CLK		1
+
 #endif /* _DT_BINDINGS_PHY_QMP */