Skip to content

L
linux
Commit 8113ba91 authored by Shiraz Hashim's avatar Shiraz Hashim Committed by Viresh Kumar
Browse files
Options

ARM: SPEAr: DT: Update device nodes 

This patch adds multiple device nodes for SPEAr machines and boards.
Signed-off-by: default avatarBhavna Yadav <bhavna.yadav@st.com>
Signed-off-by: default avatarDeepak Sikri <deepak.sikri@st.com>
Signed-off-by: default avatarRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: default avatarShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: default avatarVijay Kumar Mishra <vijay.kumar@st.com>
Signed-off-by: default avatarVipin Kumar <vipin.kumar@st.com>
Signed-off-by: default avatarVipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
parent 7bceba83
Show whitespace changes
Inline Side-by-side
Showing with 385 additions and 0 deletions
arch/arm/boot/dts/spear1310-evb.dts
View file @ 8113ba91
......@@ -147,6 +147,20 @@ partition@E40000 {
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "wakeup";
linux,code = <0x100>;
gpios = <&gpio0 7 0x4>;
debounce-interval = <20>;
gpio-key,wakeup = <1>;
};
};
gmac0: eth@e2000000 {
phy-mode = "gmii";
status = "okay";
......@@ -330,6 +344,75 @@ serial@e0000000 {
spi0: spi@e0100000 {
status = "okay";
num-cs = <3>;
cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
stmpe610@0 {
compatible = "st,stmpe610";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <1000000>;
spi-cpha;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x7>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
interrupts = <6 0x4>;
interrupt-parent = <&gpio1>;
irq-trigger = <0x2>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
ts,adc-freq = <1>;
ts,ave-ctrl = <1>;
ts,touch-det-delay = <2>;
ts,settling = <2>;
ts,fraction-z = <7>;
ts,i-drive = <1>;
};
};
m25p80@1 {
compatible = "st,m25p80";
reg = <1>;
spi-max-frequency = <12000000>;
spi-cpol;
spi-cpha;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x11>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
spidev@2 {
compatible = "spidev";
reg = <2>;
spi-max-frequency = <25000000>;
spi-cpha;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x11>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
};
wdt@ec800620 {
......
arch/arm/boot/dts/spear1310.dtsi
View file @ 8113ba91
......@@ -160,6 +160,8 @@ spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
......
arch/arm/boot/dts/spear1340-evb.dts
View file @ 8113ba91
......@@ -118,6 +118,10 @@ pcie {
};
};
ahci@b1000000 {
status = "okay";
};
dma@ea800000 {
status = "okay";
};
......@@ -205,10 +209,37 @@ ehci@e4800000 {
status = "okay";
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "wakeup";
linux,code = <0x100>;
gpios = <&gpio1 1 0x4>;
debounce-interval = <20>;
gpio-key,wakeup = <1>;
};
};
ehci@e5800000 {
status = "okay";
};
i2s0: i2s-play@b2400000 {
status = "okay";
};
i2s1: i2s-rec@b2000000 {
status = "okay";
};
incodec: dir-hifi {
compatible = "dummy,dir-hifi";
status = "okay";
};
ohci@e4000000 {
status = "okay";
};
......@@ -217,11 +248,43 @@ ohci@e5000000 {
status = "okay";
};
outcodec: dit-hifi {
compatible = "dummy,dit-hifi";
status = "okay";
};
sound {
compatible = "spear,spear-evb";
audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
audio-codecs = <&incodec &outcodec &sta529 &sta529>;
codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
nr_controllers = <4>;
status = "okay";
};
spdif0: spdif-in@d0100000 {
status = "okay";
};
spdif1: spdif-out@d0000000 {
status = "okay";
};
apb {
adc@e0080000 {
status = "okay";
};
i2s-play@b2400000 {
status = "okay";
};
i2s-rec@b2000000 {
status = "okay";
};
gpio0: gpio@e0600000 {
status = "okay";
};
......@@ -236,10 +299,36 @@ gpio@e2800000 {
i2c0: i2c@e0280000 {
status = "okay";
sta529: sta529@1a {
compatible = "st,sta529";
reg = <0x1a>;
};
};
i2c1: i2c@b4000000 {
status = "okay";
eeprom0@56 {
compatible = "st,eeprom";
reg = <0x56>;
};
stmpe801@41 {
compatible = "st,stmpe801";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
interrupts = <4 0x4>;
interrupt-parent = <&gpio0>;
irq-trigger = <0x2>;
stmpegpio: stmpe_gpio {
compatible = "st,stmpe-gpio";
gpio-controller;
#gpio-cells = <2>;
};
};
};
kbd@e0300000 {
......@@ -348,6 +437,80 @@ serial@b4100000 {
spi0: spi@e0100000 {
status = "okay";
num-cs = <3>;
cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
<&gpiopinctrl 85 0>;
m25p80@0 {
compatible = "m25p80";
reg = <0>;
spi-max-frequency = <12000000>;
spi-cpol;
spi-cpha;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x11>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
stmpe610@1 {
compatible = "st,stmpe610";
spi-max-frequency = <1000000>;
spi-cpha;
reg = <1>;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x7>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
interrupts = <100 0>;
interrupt-parent = <&gpiopinctrl>;
irq-trigger = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
ts,adc-freq = <1>;
ts,ave-ctrl = <1>;
ts,touch-det-delay = <2>;
ts,settling = <2>;
ts,fraction-z = <7>;
ts,i-drive = <1>;
};
};
spidev@2 {
compatible = "spidev";
reg = <2>;
spi-max-frequency = <25000000>;
spi-cpha;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,slave-tx-disable;
pl022,com-mode = <0x2>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
pl022,ctrl-len = <0x11>;
pl022,wait-state = <0>;
pl022,duplex = <0>;
};
};
timer@ec800600 {
status = "okay";
};
wdt@ec800620 {
......
arch/arm/boot/dts/spear1340.dtsi
View file @ 8113ba91
......@@ -38,15 +38,61 @@ ahci@b1000000 {
status = "disabled";
};
i2s-play@b2400000 {
compatible = "snps,designware-i2s";
reg = <0xb2400000 0x10000>;
interrupt-names = "play_irq";
interrupts = <0 98 0x4
0 99 0x4>;
play;
channel = <8>;
status = "disabled";
};
i2s-rec@b2000000 {
compatible = "snps,designware-i2s";
reg = <0xb2000000 0x10000>;
interrupt-names = "record_irq";
interrupts = <0 100 0x4
0 101 0x4>;
record;
channel = <8>;
status = "disabled";
};
pinmux: pinmux@e0700000 {
compatible = "st,spear1340-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
};
pwm: pwm@e0180000 {
compatible ="st,spear13xx-pwm";
reg = <0xe0180000 0x1000>;
#pwm-cells = <2>;
status = "disabled";
};
spdif-in@d0100000 {
compatible = "st,spdif-in";
reg = < 0xd0100000 0x20000
0xd0110000 0x10000 >;
interrupts = <0 84 0x4>;
status = "disabled";
};
spdif-out@d0000000 {
compatible = "st,spdif-out";
reg = <0xd0000000 0x20000>;
interrupts = <0 85 0x4>;
status = "disabled";
};
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 99 0x4>;
status = "disabled";
};
......
arch/arm/boot/dts/spear13xx.dtsi
View file @ 8113ba91
......@@ -64,6 +64,18 @@ chosen {
bootargs = "console=ttyAMA0,115200";
};
cpufreq {
compatible = "st,cpufreq-spear";
cpufreq_tbl = < 166000
200000
250000
300000
400000
500000
600000 >;
status = "disable";
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
......@@ -128,6 +140,13 @@ gmac0: eth@e2000000 {
status = "disabled";
};
pcm {
compatible = "st,pcm-audio";
#address-cells = <0>;
#size-cells = <0>;
status = "disable";
};
smi: flash@ea000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
......@@ -217,9 +236,29 @@ i2c0: i2c@e0280000 {
status = "disabled";
};
i2s@e0180000 {
compatible = "st,designware-i2s";
reg = <0xe0180000 0x1000>;
interrupt-names = "play_irq", "record_irq";
interrupts = <0 10 0x4
0 11 0x4 >;
status = "disabled";
};
i2s@e0200000 {
compatible = "st,designware-i2s";
reg = <0xe0200000 0x1000>;
interrupt-names = "play_irq", "record_irq";
interrupts = <0 26 0x4
0 53 0x4>;
status = "disabled";
};
spi0: spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
};
......
arch/arm/boot/dts/spear320.dtsi
View file @ 8113ba91
......@@ -56,12 +56,23 @@ sdhci@70000000 {
spi1: spi@a5000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa5000000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@a6000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa6000000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm: pwm@a8000000 {
compatible ="st,spear-pwm";
reg = <0xa8000000 0x1000>;
#pwm-cells = <2>;
status = "disabled";
};
......
arch/arm/boot/dts/spear3xx.dtsi
View file @ 8113ba91
......@@ -70,6 +70,8 @@ spi0: spi@d0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xd0100000 0x1000>;
interrupts = <20>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
......
arch/arm/boot/dts/spear600-evb.dts
View file @ 8113ba91
......@@ -24,15 +24,35 @@ memory {
};
ahb {
clcd@fc200000 {
status = "okay";
};
dma@fc400000 {
status = "okay";
};
ehci@e1800000 {
status = "okay";
};
ehci@e2000000 {
status = "okay";
};
gmac: ethernet@e0800000 {
phy-mode = "gmii";
status = "okay";
};
ohci@e1900000 {
status = "okay";
};
ohci@e2100000 {
status = "okay";
};
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
......@@ -83,6 +103,10 @@ serial@d0080000 {
pinctrl-0 = <>;
};
rtc@fc900000 {
status = "okay";
};
i2c@d0200000 {
clock-frequency = <400000>;
status = "okay";
......
arch/arm/boot/dts/spear600.dtsi
View file @ 8113ba91
......@@ -45,6 +45,14 @@ vic1: interrupt-controller@f1000000 {
#interrupt-cells = <1>;
};
clcd@fc200000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xfc200000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <12>;
status = "disabled";
};
dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
......@@ -179,6 +187,13 @@ i2c@d0200000 {
status = "disabled";
};
rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
interrupts = <10>;
status = "disabled";
};
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7