Skip to content

L
linux
Commit 815acebf authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge branch 'ux500/delete-u5500' into next/soc 

Conflicts:
	arch/arm/mach-ux500/cache-l2x0.c
	arch/arm/mach-ux500/clock.c
	arch/arm/mach-ux500/cpu.c
	arch/arm/mach-ux500/mbox-db5500.c
	arch/arm/mach-ux500/platsmp.c
	arch/arm/mach-ux500/timer.c

Resolve lots of identical conflicts between the removal of
u5500 and the addition of u8540.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 417f381c 72fb9220
Expand all Show whitespace changes
Inline Side-by-side
Showing with 56 additions and 5833 deletions
arch/arm/mach-ux500/Kconfig
View file @ 815acebf
......@@ -10,10 +10,6 @@ config UX500_SOC_COMMON
select ARM_ERRATA_764369
select CACHE_L2X0
config UX500_SOC_DB5500
bool
select MFD_DB5500_PRCMU
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
......@@ -45,15 +41,8 @@ config MACH_SNOWBALL
help
Include support for the snowball development platform.
config MACH_U5500
bool "U5500 Development platform"
select UX500_SOC_DB5500
help
Include support for the U5500 development platform.
config UX500_AUTO_PLATFORM
def_bool y
depends on !MACH_U5500
select MACH_MOP500
help
At least one platform needs to be selected in order to build
......@@ -74,18 +63,4 @@ config UX500_DEBUG_UART
Choose the UART on which kernel low-level debug messages should be
output.
config U5500_MODEM_IRQ
bool "Modem IRQ support"
depends on UX500_SOC_DB5500
default y
help
Add support for handling IRQ:s from modem side
config U5500_MBOX
bool "Mailbox support"
depends on U5500_MODEM_IRQ
default y
help
Add support for U5500 mailbox communication with modem side
endif
arch/arm/mach-ux500/Makefile
View file @ 815acebf
......@@ -5,16 +5,11 @@
obj-y := clock.o cpu.o devices.o devices-common.o \
id.o usb.o timer.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o \
board-mop500-pins.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
arch/arm/mach-ux500/board-u5500-sdi.c deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Hanumath Prasad <ulf.hansson@stericsson.com>
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
#include <plat/pincfg.h>
#include <plat/gpio-nomadik.h>
#include <mach/db5500-regs.h>
#include <plat/ste_dma40.h>
#include "pins-db5500.h"
#include "devices-db5500.h"
#include "ste-dma40-db5500.h"
static pin_cfg_t u5500_sdi_pins[] = {
/* SDI0 (POP eMMC) */
GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP,
GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW,
};
#ifdef CONFIG_STE_DMA40
struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif
static struct mmci_platform_data u5500_sdi0_data = {
.ocr_mask = MMC_VDD_165_195,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &u5500_sdi0_dma_cfg_rx,
.dma_tx_param = &u5500_sdi0_dma_cfg_tx,
#endif
};
void __init u5500_sdi_init(struct device *parent)
{
nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
db5500_add_sdi0(parent, &u5500_sdi0_data);
}
arch/arm/mach-ux500/board-u5500.c deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mfd/abx500/ab5500.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/pincfg.h>
#include <plat/i2c.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
#include <mach/setup.h>
#include "pins-db5500.h"
#include "devices-db5500.h"
#include <linux/led-lm3530.h>
/*
* GPIO
*/
static pin_cfg_t u5500_pins[] = {
/* I2C */
GPIO218_I2C2_SCL | PIN_INPUT_PULLUP,
GPIO219_I2C2_SDA | PIN_INPUT_PULLUP,
/* DISPLAY_ENABLE */
GPIO226_GPIO | PIN_OUTPUT_LOW,
/* Backlight Enbale */
GPIO224_GPIO | PIN_OUTPUT_HIGH,
};
/*
* I2C
*/
#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
static struct nmk_i2c_controller u5500_i2c##id##_data = { \
/* \
* slave data setup time, which is \
* 250 ns,100ns,10ns which is 14,6,2 \
* respectively for a 48 Mhz \
* i2c clock \
*/ \
.slsu = _slsu, \
/* Tx FIFO threshold */ \
.tft = _tft, \
/* Rx FIFO threshold */ \
.rft = _rft, \
/* std. mode operation */ \
.clk_freq = clk, \
.sm = _sm, \
}
/*
* The board uses TODO <3> i2c controllers, initialize all of
* them with slave data setup time of 250 ns,
* Tx & Rx FIFO threshold values as 1 and standard
* mode of operation
*/
U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
static struct lm3530_platform_data u5500_als_platform_data = {
.mode = LM3530_BL_MODE_MANUAL,
.als_input_mode = LM3530_INPUT_ALS1,
.max_current = LM3530_FS_CURR_26mA,
.pwm_pol_hi = true,
.als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
.brt_ramp_law = 1, /* Linear */
.brt_ramp_fall = LM3530_RAMP_TIME_8s,
.brt_ramp_rise = LM3530_RAMP_TIME_8s,
.als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
.als2_resistor_sel = LM3530_ALS_IMPD_Z,
.als_vmin = 730, /* mV */
.als_vmax = 1020, /* mV */
.brt_val = 0x7F, /* Max brightness */
};
static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
{
/* Backlight */
I2C_BOARD_INFO("lm3530-led", 0x36),
.platform_data = &u5500_als_platform_data,
},
};
static void __init u5500_i2c_init(struct device *parent)
{
db5500_add_i2c2(parent, &u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
static struct ab5500_platform_data ab5500_plf_data = {
.irq = {
.base = 0,
.count = 0,
},
.init_settings = NULL,
.init_settings_sz = 0,
.pm_power_off = false,
};
static struct platform_device ab5500_device = {
.name = "ab5500-core",
.id = 0,
.dev = {
.platform_data = &ab5500_plf_data,
},
.num_resources = 0,
};
static struct platform_device *u5500_platform_devices[] __initdata = {
&ab5500_device,
};
static void __init u5500_uart_init(struct device *parent)
{
db5500_add_uart0(parent, NULL);
db5500_add_uart1(parent, NULL);
db5500_add_uart2(parent, NULL);
}
static void __init u5500_init_machine(void)
{
struct device *parent = NULL;
int i;
parent = u5500_init_devices();
nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
u5500_i2c_init(parent);
u5500_sdi_init(parent);
u5500_uart_init(parent);
for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
u5500_platform_devices[i]->dev.parent = parent;
platform_add_devices(u5500_platform_devices,
ARRAY_SIZE(u5500_platform_devices));
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
.atag_offset = 0x100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = u5500_init_machine,
MACHINE_END
arch/arm/mach-ux500/cache-l2x0.c
View file @ 815acebf
......@@ -38,9 +38,7 @@ static int __init ux500_l2x0_init(void)
{
u32 aux_val = 0x3e000000;
if (cpu_is_u5500())
l2x0_base = __io_address(U5500_L2CC_BASE);
else if (cpu_is_u8500_family())
if (cpu_is_u8500_family())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
......
arch/arm/mach-ux500/clock.c
View file @ 815acebf
......@@ -149,9 +149,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
unsigned long mturate;
unsigned long retclk;
if (cpu_is_u5500())
addr = __io_address(U5500_PRCMU_BASE);
else if (cpu_is_u8500_family())
if (cpu_is_u8500_family())
addr = __io_address(U8500_PRCMU_BASE);
else
ux500_unknown_soc();
......@@ -705,14 +703,6 @@ late_initcall(clk_init_smp_twd_cpufreq);
int __init clk_init(void)
{
if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
clk_uartclk.rate = 36360000;
clk_sdmmcclk.rate = 99900000;
}
clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
clkdev_add(&clk_smp_twd_lookup);
......
arch/arm/mach-ux500/cpu-db5500.c deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/devices.h>
#include <mach/setup.h>
#include <mach/irqs.h>
#include <mach/usb.h>
#include "devices-db5500.h"
#include "ste-dma40-db5500.h"
static struct map_desc u5500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
};
static struct map_desc u5500_io_desc[] __initdata = {
/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
__IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
};
static struct resource mbox0_resources[] = {
{
.name = "mbox_peer",
.start = U5500_MBOX0_PEER_START,
.end = U5500_MBOX0_PEER_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_local",
.start = U5500_MBOX0_LOCAL_START,
.end = U5500_MBOX0_LOCAL_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_irq",
.start = MBOX_PAIR0_VIRT_IRQ,
.end = MBOX_PAIR0_VIRT_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct resource mbox1_resources[] = {
{
.name = "mbox_peer",
.start = U5500_MBOX1_PEER_START,
.end = U5500_MBOX1_PEER_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_local",
.start = U5500_MBOX1_LOCAL_START,
.end = U5500_MBOX1_LOCAL_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_irq",
.start = MBOX_PAIR1_VIRT_IRQ,
.end = MBOX_PAIR1_VIRT_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct resource mbox2_resources[] = {
{
.name = "mbox_peer",
.start = U5500_MBOX2_PEER_START,
.end = U5500_MBOX2_PEER_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_local",
.start = U5500_MBOX2_LOCAL_START,
.end = U5500_MBOX2_LOCAL_END,
.flags = IORESOURCE_MEM,
},
{
.name = "mbox_irq",
.start = MBOX_PAIR2_VIRT_IRQ,
.end = MBOX_PAIR2_VIRT_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device mbox0_device = {
.id = 0,
.name = "mbox",
.resource = mbox0_resources,
.num_resources = ARRAY_SIZE(mbox0_resources),
};
static struct platform_device mbox1_device = {
.id = 1,
.name = "mbox",
.resource = mbox1_resources,
.num_resources = ARRAY_SIZE(mbox1_resources),
};
static struct platform_device mbox2_device = {
.id = 2,
.name = "mbox",
.resource = mbox2_resources,
.num_resources = ARRAY_SIZE(mbox2_resources),
};
static struct platform_device *db5500_platform_devs[] __initdata = {
&mbox0_device,
&mbox1_device,
&mbox2_device,
};
static resource_size_t __initdata db5500_gpio_base[] = {
U5500_GPIOBANK0_BASE,
U5500_GPIOBANK1_BASE,
U5500_GPIOBANK2_BASE,
U5500_GPIOBANK3_BASE,
U5500_GPIOBANK4_BASE,
U5500_GPIOBANK5_BASE,
U5500_GPIOBANK6_BASE,
U5500_GPIOBANK7_BASE,
};
static void __init db5500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
/* No custom data yet */
};
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
IRQ_DB5500_GPIO0, &pdata);
}
void __init u5500_map_io(void)
{
/*
* Map the UARTs early so that the DEBUG_LL stuff continues to work.
*/
iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
ux500_map_io();
iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
}
static void __init db5500_pmu_init(void)
{
struct resource res[] = {
[0] = {
.start = IRQ_DB5500_PMU0,
.end = IRQ_DB5500_PMU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_DB5500_PMU1,
.end = IRQ_DB5500_PMU1,
.flags = IORESOURCE_IRQ,
},
};
platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
res, ARRAY_SIZE(res));
}
static int usb_db5500_rx_dma_cfg[] = {
DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
DB5500_DMA_DEV38_USB_OTG_IEP_8
};
static int usb_db5500_tx_dma_cfg[] = {
DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
DB5500_DMA_DEV38_USB_OTG_OEP_8
};
static const char *db5500_read_soc_id(void)
{
return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
}
static struct device * __init db5500_soc_device_init(void)
{
const char *soc_id = db5500_read_soc_id();
return ux500_soc_device_init(soc_id);
}
struct device * __init u5500_init_devices(void)
{
struct device *parent;
int i;
parent = db5500_soc_device_init();
db5500_add_gpios(parent);
db5500_pmu_init();
db5500_dma_init(parent);
db5500_add_rtc(parent);
db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
db5500_platform_devs[i]->dev.parent = parent;
platform_add_devices(db5500_platform_devs,
ARRAY_SIZE(db5500_platform_devs));
return parent;
}
arch/arm/mach-ux500/cpu.c
View file @ 815acebf
......@@ -10,7 +10,6 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
#include <linux/err.h>
......@@ -40,10 +39,7 @@ void __init ux500_init_irq(void)
void __iomem *dist_base;
void __iomem *cpu_base;
if (cpu_is_u5500()) {
dist_base = __io_address(U5500_GIC_DIST_BASE);
cpu_base = __io_address(U5500_GIC_CPU_BASE);
} else if (cpu_is_u8500_family()) {
if (cpu_is_u8500_family()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
......@@ -60,8 +56,6 @@ void __init ux500_init_irq(void)
* Init clocks here so that they are available for system timer
* initialization.
*/
if (cpu_is_u5500())
db5500_prcmu_early_init();
if (cpu_is_u8500_family())
db8500_prcmu_early_init();
clk_init();
......
arch/arm/mach-ux500/devices-db5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL), version 2.
*/
#ifndef __DEVICES_DB5500_H
#define __DEVICES_DB5500_H
#include "devices-common.h"
#define db5500_add_i2c1(parent, pdata) \
dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
#define db5500_add_i2c2(parent, pdata) \
dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
#define db5500_add_i2c3(parent, pdata) \
dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
#define db5500_add_msp0_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
IRQ_DB5500_MSP0, pdata)
#define db5500_add_msp1_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
IRQ_DB5500_MSP1, pdata)
#define db5500_add_msp2_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
IRQ_DB5500_MSP2, pdata)
#define db5500_add_msp0_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
IRQ_DB5500_MSP0, pdata)
#define db5500_add_msp1_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
IRQ_DB5500_MSP1, pdata)
#define db5500_add_msp2_spi(parent, pdata) \
dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
IRQ_DB5500_MSP2, pdata)
#define db5500_add_rtc(parent) \
dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
ux500_add_usb(parent, U5500_USBOTG_BASE, \
IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
#define db5500_add_sdi0(parent, pdata) \
dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
IRQ_DB5500_SDMMC0, pdata, \
0x10480180)
#define db5500_add_sdi1(parent, pdata) \
dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
IRQ_DB5500_SDMMC1, pdata, \
0x10480180)
#define db5500_add_sdi2(parent, pdata) \
dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
IRQ_DB5500_SDMMC2, pdata \
0x10480180)
#define db5500_add_sdi3(parent, pdata) \
dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
IRQ_DB5500_SDMMC3, pdata \
0x10480180)
#define db5500_add_sdi4(parent, pdata) \
dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
IRQ_DB5500_SDMMC4, pdata \
0x10480180)
/* This one has a bad peripheral ID in the U5500 silicon */
#define db5500_add_spi0(parent, pdata) \
dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
IRQ_DB5500_SPI0, pdata, \
0x10080023)
#define db5500_add_spi1(parent, pdata) \
dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
IRQ_DB5500_SPI1, pdata, \
0x10080023)
#define db5500_add_spi2(parent, pdata) \
dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
IRQ_DB5500_SPI2, pdata \
0x10080023)
#define db5500_add_spi3(parent, pdata) \
dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
IRQ_DB5500_SPI3, pdata \
0x10080023)
#define db5500_add_uart0(parent, plat) \
dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
IRQ_DB5500_UART0, plat)
#define db5500_add_uart1(parent, plat) \
dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
IRQ_DB5500_UART1, plat)
#define db5500_add_uart2(parent, plat) \
dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
IRQ_DB5500_UART2, plat)
#define db5500_add_uart3(parent, plat) \
dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
IRQ_DB5500_UART3, plat)
#endif
arch/arm/mach-ux500/dma-db5500.c deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
* Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
*
* License terms: GNU General Public License (GPL), version 2
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <plat/ste_dma40.h>
#include <mach/setup.h>
#include <mach/hardware.h>
#include "ste-dma40-db5500.h"
static struct resource dma40_resources[] = {
[0] = {
.start = U5500_DMA_BASE,
.end = U5500_DMA_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
.name = "base",
},
[1] = {
.start = U5500_DMA_LCPA_BASE,
.end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
.flags = IORESOURCE_MEM,
.name = "lcpa",
},
[2] = {
.start = IRQ_DB5500_DMA,
.end = IRQ_DB5500_DMA,
.flags = IORESOURCE_IRQ
}
};
/* Default configuration for physical memcpy */
static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
.mode = STEDMA40_MODE_PHYSICAL,
.dir = STEDMA40_MEM_TO_MEM,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_PHY_1,
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.psize = STEDMA40_PSIZE_PHY_1,
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
};
/* Default configuration for logical memcpy */
static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
.dir = STEDMA40_MEM_TO_MEM,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_LOG_1,
.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
.dst_info.data_width = STEDMA40_BYTE_WIDTH,
.dst_info.psize = STEDMA40_PSIZE_LOG_1,
.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
};
/*
* Mapping between soruce event lines and physical device address This was
* created assuming that the event line is tied to a device and therefore the
* address is constant, however this is not true for at least USB, and the
* values are just placeholders for USB. This table is preserved and used for
* now.
*/
static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
[DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
[DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
[DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
[DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
[DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
[DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
[DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
[DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
};
/* Mapping between destination event lines and physical device address */
static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
[DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
[DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
[DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
[DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
[DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
[DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
[DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
[DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
};
static int dma40_memcpy_event[] = {
DB5500_DMA_MEMCPY_TX_1,
DB5500_DMA_MEMCPY_TX_2,
DB5500_DMA_MEMCPY_TX_3,
DB5500_DMA_MEMCPY_TX_4,
DB5500_DMA_MEMCPY_TX_5,
};
static struct stedma40_platform_data dma40_plat_data = {
.dev_len = ARRAY_SIZE(dma40_rx_map),
.dev_rx = dma40_rx_map,
.dev_tx = dma40_tx_map,
.memcpy = dma40_memcpy_event,
.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
.memcpy_conf_phy = &dma40_memcpy_conf_phy,
.memcpy_conf_log = &dma40_memcpy_conf_log,
.disabled_channels = {-1},
};
static struct platform_device dma40_device = {
.dev = {
.platform_data = &dma40_plat_data,
},
.name = "dma40",
.id = 0,
.num_resources = ARRAY_SIZE(dma40_resources),
.resource = dma40_resources
};
void __init db5500_dma_init(struct device *parent)
{
int ret;
dma40_device.dev.parent = parent;
ret = platform_device_register(&dma40_device);
if (ret)
dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
}
arch/arm/mach-ux500/include/mach/db5500-regs.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef __MACH_DB5500_REGS_H
#define __MACH_DB5500_REGS_H
#define U5500_PER1_BASE 0xA0020000
#define U5500_PER2_BASE 0xA0010000
#define U5500_PER3_BASE 0x80140000
#define U5500_PER4_BASE 0x80150000
#define U5500_PER5_BASE 0x80100000
#define U5500_PER6_BASE 0x80120000
#define U5500_GIC_DIST_BASE 0xA0411000
#define U5500_GIC_CPU_BASE 0xA0410100
#define U5500_DMA_BASE 0x90030000
#define U5500_STM_BASE 0x90020000
#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000)
#define U5500_MCDE_BASE 0xA0400000
#define U5500_MODEM_BASE 0xB0000000
#define U5500_L2CC_BASE 0xA0412000
#define U5500_SCU_BASE 0xA0410000
#define U5500_DSI1_BASE 0xA0401000
#define U5500_DSI2_BASE 0xA0402000
#define U5500_SIA_BASE 0xA0100000
#define U5500_SVA_BASE 0x80200000
#define U5500_HSEM_BASE 0xA0000000
#define U5500_NAND0_BASE 0x60000000
#define U5500_NAND1_BASE 0x70000000
#define U5500_TWD_BASE 0xa0410600
#define U5500_ICN_BASE 0xA0040000
#define U5500_B2R2_BASE 0xa0200000
#define U5500_BOOT_ROM_BASE 0x90000000
#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000)
#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000)
#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000)
#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000)
#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000)
#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000)
#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000)
#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000)
#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000)
#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000)
#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000)
#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000)
#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000)
#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000)
#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000)
#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000)
#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000)
#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000)
#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000)
#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000)
#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000)
#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000)
#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000)
#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000)
#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000)
#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000)
#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000)
#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000)
#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000)
#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000)
#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000)
#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000)
#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000)
#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000)
#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000)
#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000)
#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100)
#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000)
#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000)
#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000)
#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE
#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80)
#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE
#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE
#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE
#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE
#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80)
#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100)
#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000)
#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40)
#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F)
#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60)
#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F)
#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80)
#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F)
#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0)
#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF)
#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00)
#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F)
#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)
#define U5500_ACCCON_BASE_SEC (0xBFFF0000)
#define U5500_ACCCON_BASE (0xBFFF1000)
#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4)
#define U5500_ESRAM_BASE 0x40000000
#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
#define U5500_MCDE_SIZE 0x1000
#define U5500_DSI_LINK_SIZE 0x1000
#define U5500_DSI_LINK_COUNT 0x2
#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE)
#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
#endif
arch/arm/mach-ux500/include/mach/debug-macro.S
View file @ 815acebf
......@@ -20,10 +20,6 @@
* built, so that there's some hint during the build that something is wrong.
*/
#ifdef CONFIG_UX500_SOC_DB5500
#define __UX500_UART(n) U5500_UART##n##_BASE
#endif
#ifdef CONFIG_UX500_SOC_DB8500
#define __UX500_UART(n) U8500_UART##n##_BASE
#endif
......
arch/arm/mach-ux500/include/mach/devices.h
View file @ 815acebf
......@@ -10,7 +10,6 @@
struct platform_device;
struct amba_device;
extern struct platform_device u5500_gpio_devs[];
extern struct platform_device u8500_gpio_devs[];
extern struct amba_device ux500_pl031_device;
......
arch/arm/mach-ux500/include/mach/hardware.h
View file @ 815acebf
......@@ -31,7 +31,6 @@
#define io_p2v(n) __io_address(n)
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
#define MSP_TX_RX_REG_OFFSET 0
......
arch/arm/mach-ux500/include/mach/irqs-board-u5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef __MACH_IRQS_BOARD_U5500_H
#define __MACH_IRQS_BOARD_U5500_H
#define AB5500_NR_IRQS 5
#define IRQ_AB5500_BASE IRQ_BOARD_START
#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS)
#define U5500_IRQ_END IRQ_AB5500_END
#if IRQ_BOARD_END < U5500_IRQ_END
#undef IRQ_BOARD_END
#define IRQ_BOARD_END U5500_IRQ_END
#endif
#endif
arch/arm/mach-ux500/include/mach/irqs-db5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com>
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef __MACH_IRQS_DB5500_H
#define __MACH_IRQS_DB5500_H
#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4)
#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6)
#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7)
#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8)
#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9)
#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10)
#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11)
#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12)
#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13)
#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14)
#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15)
#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16)
#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17)
#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18)
#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19)
#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20)
#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21)
#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22)
#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23)
#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24)
#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25)
#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26)
#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27)
#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28)
#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29)
#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30)
#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31)
#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33)
#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34)
#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35)
#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36)
#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37)
#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38)
#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39)
#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40)
#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41)
#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42)
#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43)
#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44)
#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45)
#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46)
#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47)
#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48)
#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50)
#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52)
#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53)
#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55)
#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56)
#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57)
#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59)
#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60)
#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61)
#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63)
#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65)
#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96)
#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98)
#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101)
#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108)
#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109)
#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110)
#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112)
#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113)
#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114)
#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115)
#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116)
#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118)
#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119)
#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120)
#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121)
#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122)
#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123)
#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124)
#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125)
#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126)
#ifdef CONFIG_UX500_SOC_DB5500
/*
* After the GPIO ones we reserve a range of IRQ:s in which virtual
* IRQ:s representing modem IRQ:s can be allocated
*/
#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START
#define IRQ_MODEM_EVENTS_NBR 72
#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
/* List of virtual IRQ:s that are allocated from the range above */
#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
/*
* We may have several SoCs, but only one will run at a
* time, so the one with most IRQs will bump this ahead,
* but the IRQ_SOC_START remains the same for either SoC.
*/
#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
#undef IRQ_SOC_END
#define IRQ_SOC_END IRQ_MODEM_EVENTS_END
#endif
#endif /* CONFIG_UX500_SOC_DB5500 */
#endif
arch/arm/mach-ux500/include/mach/irqs.h
View file @ 815acebf
......@@ -36,7 +36,6 @@
/* This will be overridden by SoC-specific irq headers */
#define IRQ_SOC_END IRQ_SOC_START
#include <mach/irqs-db5500.h>
#include <mach/irqs-db8500.h>
#define IRQ_BOARD_START IRQ_SOC_END
......@@ -47,10 +46,6 @@
#include <mach/irqs-board-mop500.h>
#endif
#ifdef CONFIG_MACH_U5500
#include <mach/irqs-board-u5500.h>
#endif
#define NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
arch/arm/mach-ux500/include/mach/mbox-db5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
* Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
* License terms: GNU General Public License (GPL), version 2.
*/
#ifndef __INC_STE_MBOX_H
#define __INC_STE_MBOX_H
#define MBOX_BUF_SIZE 16
#define MBOX_NAME_SIZE 8
/**
* mbox_recv_cb_t - Definition of the mailbox callback.
* @mbox_msg: The mailbox message.
* @priv: The clients private data as specified in the call to mbox_setup.
*
* This function will be called upon reception of new mailbox messages.
*/
typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
/**
* struct mbox - Mailbox instance struct
* @list: Linked list head.
* @pdev: Pointer to device struct.
* @cb: Callback function. Will be called
* when new data is received.
* @client_data: Clients private data. Will be sent back
* in the callback function.
* @virtbase_peer: Virtual address for outgoing mailbox.
* @virtbase_local: Virtual address for incoming mailbox.
* @buffer: Then internal queue for outgoing messages.
* @name: Name of this mailbox.
* @buffer_available: Completion variable to achieve "blocking send".
* This variable will be signaled when there is
* internal buffer space available.
* @client_blocked: To keep track if any client is currently
* blocked.
* @lock: Spinlock to protect this mailbox instance.
* @write_index: Index in internal buffer to write to.
* @read_index: Index in internal buffer to read from.
* @allocated: Indicates whether this particular mailbox
* id has been allocated by someone.
*/
struct mbox {
struct list_head list;
struct platform_device *pdev;
mbox_recv_cb_t *cb;
void *client_data;
void __iomem *virtbase_peer;
void __iomem *virtbase_local;
u32 buffer[MBOX_BUF_SIZE];
char name[MBOX_NAME_SIZE];
struct completion buffer_available;
u8 client_blocked;
spinlock_t lock;
u8 write_index;
u8 read_index;
bool allocated;
};
/**
* mbox_setup - Set up a mailbox and return its instance.
* @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU,
* 2 for modem DSP.
* @mbox_cb: Pointer to the callback function to be called when a new message
* is received.
* @priv: Client user data which will be returned in the callback.
*
* Returns a mailbox instance to be specified in subsequent calls to mbox_send.
*/
struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
/**
* mbox_send - Send a mailbox message.
* @mbox: Mailbox instance (returned by mbox_setup)
* @mbox_msg: The mailbox message to send.
* @block: Specifies whether this call will block until send is possible,
* or return an error if the mailbox buffer is full.
*
* Returns 0 on success or a negative error code on error. -ENOMEM indicates
* that the internal buffer is full and you have to try again later (or
* specify "block" in order to block until send is possible).
*/
int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
#endif /*INC_STE_MBOX_H*/
arch/arm/mach-ux500/include/mach/setup.h
View file @ 815acebf
......@@ -15,18 +15,12 @@
#include <linux/init.h>
void __init ux500_map_io(void);
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
extern struct device * __init u5500_init_devices(void);
extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
extern void __init u5500_sdi_init(struct device *parent);
extern void __init db5500_dma_init(struct device *parent);
extern struct device *ux500_soc_device_init(const char *soc_id);
struct amba_device;
......
arch/arm/mach-ux500/include/mach/uncompress.h
View file @ 815acebf
......@@ -50,10 +50,7 @@ static void flush(void)
static inline void arch_decomp_setup(void)
{
/* Check in run time if we run on an U8500 or U5500 */
if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
else
/* Use machine_is_foo() macro if you need to switch base someday */
ux500_uart_base = U8500_UART2_BASE;
}
......
arch/arm/mach-ux500/mbox-db5500.c deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
arch/arm/mach-ux500/modem-irq-db5500.c deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
* Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
* License terms: GNU General Public License (GPL), version 2.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <mach/id.h>
#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
#define MODEM_INTCON_SIZE 0xFFF
#define DEST_IRQ41_OFFSET 0x2A4
#define DEST_IRQ43_OFFSET 0x2AC
#define DEST_IRQ45_OFFSET 0x2B4
#define PRIO_IRQ41_OFFSET 0x6A4
#define PRIO_IRQ43_OFFSET 0x6AC
#define PRIO_IRQ45_OFFSET 0x6B4
#define ALLOW_IRQ_OFFSET 0x104
#define MODEM_INTCON_CPU_NBR 0x1
#define MODEM_INTCON_PRIO_HIGH 0x0
#define MODEM_INTCON_ALLOW_IRQ41 0x0200
#define MODEM_INTCON_ALLOW_IRQ43 0x0800
#define MODEM_INTCON_ALLOW_IRQ45 0x2000
#define MODEM_IRQ_REG_OFFSET 0x4
struct modem_irq {
void __iomem *modem_intcon_base;
};
static void setup_modem_intcon(void __iomem *modem_intcon_base)
{
/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
/* IC_ALLOW_ARRAY - IRQ enable */
writel(MODEM_INTCON_ALLOW_IRQ41 |
MODEM_INTCON_ALLOW_IRQ43 |
MODEM_INTCON_ALLOW_IRQ45,
modem_intcon_base + ALLOW_IRQ_OFFSET);
}
static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
{
int real_irq;
int virt_irq;
struct modem_irq *mi = (struct modem_irq *)data;
/* Read modem side IRQ number from modem IRQ controller */
real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
"which will be 0x%X (%d) which translates to "
"virtual IRQ 0x%X (%d)!\n",
(u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
real_irq,
real_irq & 0xFF,
real_irq & 0xFF,
virt_irq,
virt_irq);
if (virt_irq != 0)
generic_handle_irq(virt_irq);
pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
return IRQ_HANDLED;
}
static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
{
irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
}
static int modem_irq_init(void)
{
int err;
static struct irq_chip modem_irq_chip;
struct modem_irq *mi;
if (!cpu_is_u5500())
return -ENODEV;
pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
IRQ_DB5500_MODEM);
mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
if (!mi) {
pr_err("modem_irq: Could not allocate device\n");
return -ENOMEM;
}
mi->modem_intcon_base =
ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
pr_debug("modem_irq: ioremapped modem_intcon_base from "
"phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
(u32)mi->modem_intcon_base);
setup_modem_intcon(mi->modem_intcon_base);
modem_irq_chip = dummy_irq_chip;
modem_irq_chip.name = "modem_irq";
/* Create the virtual IRQ:s needed */
create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
modem_cpu_irq_handler, IRQF_ONESHOT,
"modem_irq", mi);
if (err)
pr_err("modem_irq: Could not register IRQ %d\n",
IRQ_DB5500_MODEM);
return 0;
}
arch_initcall(modem_irq_init);
arch/arm/mach-ux500/pins-db5500.h deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
arch/arm/mach-ux500/platsmp.c
View file @ 815acebf
......@@ -48,9 +48,7 @@ static void write_pen_release(int val)
static void __iomem *scu_base_addr(void)
{
if (cpu_is_u5500())
return __io_address(U5500_SCU_BASE);
else if (cpu_is_u8500_family())
if (cpu_is_u8500_family())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
......@@ -120,9 +118,7 @@ static void __init wakeup_secondary(void)
{
void __iomem *backupram;
if (cpu_is_u5500())
backupram = __io_address(U5500_BACKUPRAM0_BASE);
else if (cpu_is_u8500_family())
if (cpu_is_u8500_family())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
......
arch/arm/mach-ux500/ste-dma40-db5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*
* DB5500-SoC-specific configuration for DMA40
*/
#ifndef STE_DMA40_DB5500_H
#define STE_DMA40_DB5500_H
#define DB5500_DMA_NR_DEV 64
enum dma_src_dev_type {
DB5500_DMA_DEV0_SPI0_RX = 0,
DB5500_DMA_DEV1_SPI1_RX = 1,
DB5500_DMA_DEV2_SPI2_RX = 2,
DB5500_DMA_DEV3_SPI3_RX = 3,
DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
DB5500_DMA_DEV7_IRDA_RFS = 7,
DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
DB5500_DMA_DEV9_MSP0_RX = 9,
DB5500_DMA_DEV10_MSP1_RX = 10,
DB5500_DMA_DEV11_MSP2_RX = 11,
DB5500_DMA_DEV12_UART0_RX = 12,
DB5500_DMA_DEV13_UART1_RX = 13,
DB5500_DMA_DEV14_UART2_RX = 14,
DB5500_DMA_DEV15_UART3_RX = 15,
DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
DB5500_DMA_DEV24_SDMMC0_RX = 24,
DB5500_DMA_DEV25_SDMMC1_RX = 25,
DB5500_DMA_DEV26_SDMMC2_RX = 26,
DB5500_DMA_DEV27_SDMMC3_RX = 27,
DB5500_DMA_DEV28_SDMMC4_RX = 28,
/* 29 - 32 not used */
DB5500_DMA_DEV33_SDMMC0_RX = 33,
DB5500_DMA_DEV34_SDMMC1_RX = 34,
DB5500_DMA_DEV35_SDMMC2_RX = 35,
DB5500_DMA_DEV36_SDMMC3_RX = 36,
DB5500_DMA_DEV37_SDMMC4_RX = 37,
DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
/* 46 not used */
DB5500_DMA_DEV47_MCDE_RX = 47,
DB5500_DMA_DEV48_CRYPTO1_RX = 48,
/* 49, 50 not used */
DB5500_DMA_DEV49_I2C1_RX = 51,
DB5500_DMA_DEV50_I2C3_RX = 52,
DB5500_DMA_DEV51_I2C2_RX = 53,
/* 54 - 60 not used */
DB5500_DMA_DEV61_CRYPTO0_RX = 61,
/* 62, 63 not used */
};
enum dma_dest_dev_type {
DB5500_DMA_DEV0_SPI0_TX = 0,
DB5500_DMA_DEV1_SPI1_TX = 1,
DB5500_DMA_DEV2_SPI2_TX = 2,
DB5500_DMA_DEV3_SPI3_TX = 3,
DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
DB5500_DMA_DEV7_IRRC_TX = 7,
DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
DB5500_DMA_DEV9_MSP0_TX = 9,
DB5500_DMA_DEV10_MSP1_TX = 10,
DB5500_DMA_DEV11_MSP2_TX = 11,
DB5500_DMA_DEV12_UART0_TX = 12,
DB5500_DMA_DEV13_UART1_TX = 13,
DB5500_DMA_DEV14_UART2_TX = 14,
DB5500_DMA_DEV15_UART3_TX = 15,
DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
DB5500_DMA_DEV24_SDMMC0_TX = 24,
DB5500_DMA_DEV25_SDMMC1_TX = 25,
DB5500_DMA_DEV26_SDMMC2_TX = 26,
DB5500_DMA_DEV27_SDMMC3_TX = 27,
DB5500_DMA_DEV28_SDMMC4_TX = 28,
/* 29 - 31 not used */
DB5500_DMA_DEV32_FSMC_TX = 32,
DB5500_DMA_DEV33_SDMMC0_TX = 33,
DB5500_DMA_DEV34_SDMMC1_TX = 34,
DB5500_DMA_DEV35_SDMMC2_TX = 35,
DB5500_DMA_DEV36_SDMMC3_TX = 36,
DB5500_DMA_DEV37_SDMMC4_TX = 37,
DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
/* 46 not used */
DB5500_DMA_DEV47_STM_TX = 47,
DB5500_DMA_DEV48_CRYPTO1_TX = 48,
DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
DB5500_DMA_DEV50_HASH1_TX = 50,
DB5500_DMA_DEV51_I2C1_TX = 51,
DB5500_DMA_DEV52_I2C3_TX = 52,
DB5500_DMA_DEV53_I2C2_TX = 53,
/* 54, 55 not used */
DB5500_DMA_MEMCPY_TX_1 = 56,
DB5500_DMA_MEMCPY_TX_2 = 57,
DB5500_DMA_MEMCPY_TX_3 = 58,
DB5500_DMA_MEMCPY_TX_4 = 59,
DB5500_DMA_MEMCPY_TX_5 = 60,
DB5500_DMA_DEV61_CRYPTO0_TX = 61,
DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
DB5500_DMA_DEV63_HASH0_TX = 63,
};
#endif
arch/arm/mach-ux500/timer.c
View file @ 815acebf
......@@ -18,8 +18,6 @@
#include <mach/irqs.h>
#ifdef CONFIG_HAVE_ARM_TWD
static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
U5500_TWD_BASE, IRQ_LOCALTIMER);
static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
U8500_TWD_BASE, IRQ_LOCALTIMER);
......@@ -28,8 +26,8 @@ static void __init ux500_twd_init(void)
struct twd_local_timer *twd_local_timer;
int err;
twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
&u8500_twd_local_timer;
/* Use this to switch local timer base if changed in new ASICs */
twd_local_timer = &u8500_twd_local_timer;
if (of_have_populated_dt())
twd_local_timer_of_register();
......@@ -48,10 +46,7 @@ static void __init ux500_timer_init(void)
void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
if (cpu_is_u5500()) {
mtu_timer_base = __io_address(U5500_MTU0_BASE);
prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
} else if (cpu_is_u8500_family()) {
if (cpu_is_u8500_family()) {
mtu_timer_base = __io_address(U8500_MTU0_BASE);
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
} else {
......@@ -70,7 +65,7 @@ static void __init ux500_timer_init(void)
* depending on delay which is not yet calibrated. RTC-RTT is in the
* always-on powerdomain and is used as clockevent instead of twd when
* sleeping.
* The PRCMU timer 4(3 for DB5500) register a clocksource and
* The PRCMU timer 4 register a clocksource and
* sched_clock with higher rating then MTU since is always-on.
*
*/
......
drivers/clocksource/Kconfig
View file @ 815acebf
......@@ -18,7 +18,7 @@ config DW_APB_TIMER
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
depends on UX500_SOC_DB5500 || UX500_SOC_DB8500
depends on UX500_SOC_DB8500
default y
help
Use the always on PRCMU Timer as clocksource
......
drivers/mfd/Kconfig
View file @ 815acebf
......@@ -648,23 +648,6 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
config AB5500_CORE
bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
depends on ABX500_CORE && MFD_DB5500_PRCMU
select MFD_CORE
help
Select this option to enable access to AB5500 power management
chip. This connects to the db5500 chip via the I2C bus via PRCMU.
This chip embeds various other multimedia funtionalities as well.
config AB5500_DEBUG
bool "Enable debug info via debugfs"
depends on AB5500_CORE && DEBUG_FS
default y if DEBUG_FS
help
Select this option if you want debug information from the AB5500
using the debug filesystem, debugfs.
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
......@@ -711,16 +694,6 @@ config MFD_DB8500_PRCMU
system controller running an XP70 microprocessor, which is accessed
through a register map.
config MFD_DB5500_PRCMU
bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
depends on UX500_SOC_DB5500
select MFD_CORE
help
Select this option to enable support for the DB5500 Power Reset
and Control Management Unit. This is basically an autonomous
system controller running an XP70 microprocessor, which is accessed
through a register map.
config MFD_CS5535
tristate "Support for CS5535 and CS5536 southbridge core functions"
select MFD_CORE
......
drivers/mfd/Makefile
View file @ 815acebf
......@@ -87,15 +87,12 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
# ab8500-i2c need to come after db8500-prcmu (which provides the channel)
obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o
obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
......
drivers/mfd/ab5500-core.c deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
drivers/mfd/ab5500-debugfs.c deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
drivers/mfd/ab5500-debugfs.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) 2011 ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
* Debugfs interface to the AB5500 core driver
*/
#ifdef CONFIG_DEBUG_FS
void ab5500_setup_debugfs(struct ab5500 *ab);
void ab5500_remove_debugfs(void);
#else /* !CONFIG_DEBUG_FS */
static inline void ab5500_setup_debugfs(struct ab5500 *ab)
{
}
static inline void ab5500_remove_debugfs(void)
{
}
#endif
drivers/mfd/db5500-prcmu.c deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
include/linux/mfd/abx500.h
View file @ 815acebf
......@@ -6,7 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
* ab3100, ab5500, and ab8500.
* ab3100 and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
......@@ -30,9 +30,6 @@ struct device;
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
#define AB5500_1_0 0x20
#define AB5500_1_1 0x21
#define AB5500_2_0 0x24
/*
* AB3100, EVENTA1, A2 and A3 event register flags
......
include/linux/mfd/abx500/ab5500.h deleted 100644 → 0
View file @ 417f381c
/*
* Copyright (C) ST-Ericsson 2011
*
* License Terms: GNU General Public License v2
*/
#ifndef MFD_AB5500_H
#define MFD_AB5500_H
struct device;
enum ab5500_devid {
AB5500_DEVID_ADC,
AB5500_DEVID_LEDS,
AB5500_DEVID_POWER,
AB5500_DEVID_REGULATORS,
AB5500_DEVID_SIM,
AB5500_DEVID_RTC,
AB5500_DEVID_CHARGER,
AB5500_DEVID_FUELGAUGE,
AB5500_DEVID_VIBRATOR,
AB5500_DEVID_CODEC,
AB5500_DEVID_USB,
AB5500_DEVID_OTP,
AB5500_DEVID_VIDEO,
AB5500_DEVID_DBIECI,
AB5500_DEVID_ONSWA,
AB5500_NUM_DEVICES,
};
enum ab5500_banks {
AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
AB5500_BANK_VDENC = 2,
AB5500_BANK_SIM_USBSIM = 3,
AB5500_BANK_LED = 4,
AB5500_BANK_ADC = 5,
AB5500_BANK_RTC = 6,
AB5500_BANK_STARTUP = 7,
AB5500_BANK_DBI_ECI = 8,
AB5500_BANK_CHG = 9,
AB5500_BANK_FG_BATTCOM_ACC = 10,
AB5500_BANK_USB = 11,
AB5500_BANK_IT = 12,
AB5500_BANK_VIBRA = 13,
AB5500_BANK_AUDIO_HEADSETUSB = 14,
AB5500_NUM_BANKS = 15,
};
enum ab5500_banks_addr {
AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
AB5500_ADDR_VDENC = 0x06,
AB5500_ADDR_SIM_USBSIM = 0x04,
AB5500_ADDR_LED = 0x10,
AB5500_ADDR_ADC = 0x0A,
AB5500_ADDR_RTC = 0x0F,
AB5500_ADDR_STARTUP = 0x03,
AB5500_ADDR_DBI_ECI = 0x07,
AB5500_ADDR_CHG = 0x0B,
AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
AB5500_ADDR_USB = 0x05,
AB5500_ADDR_IT = 0x0E,
AB5500_ADDR_VIBRA = 0x02,
AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
};
/*
* Interrupt register offsets
* Bank : 0x0E
*/
#define AB5500_IT_SOURCE0_REG 0x20
#define AB5500_IT_SOURCE1_REG 0x21
#define AB5500_IT_SOURCE2_REG 0x22
#define AB5500_IT_SOURCE3_REG 0x23
#define AB5500_IT_SOURCE4_REG 0x24
#define AB5500_IT_SOURCE5_REG 0x25
#define AB5500_IT_SOURCE6_REG 0x26
#define AB5500_IT_SOURCE7_REG 0x27
#define AB5500_IT_SOURCE8_REG 0x28
#define AB5500_IT_SOURCE9_REG 0x29
#define AB5500_IT_SOURCE10_REG 0x2A
#define AB5500_IT_SOURCE11_REG 0x2B
#define AB5500_IT_SOURCE12_REG 0x2C
#define AB5500_IT_SOURCE13_REG 0x2D
#define AB5500_IT_SOURCE14_REG 0x2E
#define AB5500_IT_SOURCE15_REG 0x2F
#define AB5500_IT_SOURCE16_REG 0x30
#define AB5500_IT_SOURCE17_REG 0x31
#define AB5500_IT_SOURCE18_REG 0x32
#define AB5500_IT_SOURCE19_REG 0x33
#define AB5500_IT_SOURCE20_REG 0x34
#define AB5500_IT_SOURCE21_REG 0x35
#define AB5500_IT_SOURCE22_REG 0x36
#define AB5500_IT_SOURCE23_REG 0x37
#define AB5500_NUM_IRQ_REGS 23
/**
* struct ab5500
* @access_mutex: lock out concurrent accesses to the AB registers
* @dev: a pointer to the device struct for this chip driver
* @ab5500_irq: the analog baseband irq
* @irq_base: the platform configuration irq base for subdevices
* @chip_name: name of this chip variant
* @chip_id: 8 bit chip ID for this chip variant
* @irq_lock: a lock to protect the mask
* @abb_events: a local bit mask of the prcmu wakeup events
* @event_mask: a local copy of the mask event registers
* @last_event_mask: a copy of the last event_mask written to hardware
* @startup_events: a copy of the first reading of the event registers
* @startup_events_read: whether the first events have been read
*/
struct ab5500 {
struct mutex access_mutex;
struct device *dev;
unsigned int ab5500_irq;
unsigned int irq_base;
char chip_name[32];
u8 chip_id;
struct mutex irq_lock;
u32 abb_events;
u8 mask[AB5500_NUM_IRQ_REGS];
u8 oldmask[AB5500_NUM_IRQ_REGS];
u8 startup_events[AB5500_NUM_IRQ_REGS];
bool startup_events_read;
#ifdef CONFIG_DEBUG_FS
unsigned int debug_bank;
unsigned int debug_address;
#endif
};
struct ab5500_platform_data {
struct {unsigned int base; unsigned int count; } irq;
void *dev_data[AB5500_NUM_DEVICES];
struct abx500_init_settings *init_settings;
unsigned int init_settings_sz;
bool pm_power_off;
};
#endif /* MFD_AB5500_H */
include/linux/mfd/db5500-prcmu.h deleted 100644 → 0
View file @ 417f381c
This diff is collapsed.
include/linux/mfd/dbx500-prcmu.h
View file @ 815acebf
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7