Commit 81b0287d authored by Sonic Zhang's avatar Sonic Zhang Committed by Jeff Garzik

[libata] pata_bf54x: Support sg list in bmdma transfer.

BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered
in one ATAPI transfer. So, set the max sg_tablesize to 4.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 93272b13
......@@ -251,6 +251,8 @@ static const u32 udma_tenvmin = 20;
static const u32 udma_tackmin = 20;
static const u32 udma_tssmin = 50;
#define BFIN_MAX_SG_SEGMENTS 4
/**
*
* Function: num_clocks_min
......@@ -829,79 +831,61 @@ static void bfin_set_devctl(struct ata_port *ap, u8 ctl)
static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
{
unsigned short config = WDSIZE_16;
struct ata_port *ap = qc->ap;
struct dma_desc_array *dma_desc_cpu = (struct dma_desc_array *)ap->bmdma_prd;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned short config = DMAFLOW_ARRAY | NDSIZE_5 | RESTART | WDSIZE_16 | DMAEN;
struct scatterlist *sg;
unsigned int si;
unsigned int channel;
unsigned int dir;
unsigned int size = 0;
dev_dbg(qc->ap->dev, "in atapi dma setup\n");
/* Program the ATA_CTRL register with dir */
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* fill the ATAPI DMA controller */
set_dma_config(CH_ATAPI_TX, config);
set_dma_x_modify(CH_ATAPI_TX, 2);
for_each_sg(qc->sg, sg, qc->n_elem, si) {
set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg));
set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1);
}
channel = CH_ATAPI_TX;
dir = DMA_TO_DEVICE;
} else {
channel = CH_ATAPI_RX;
dir = DMA_FROM_DEVICE;
config |= WNR;
}
dma_map_sg(ap->dev, qc->sg, qc->n_elem, dir);
/* fill the ATAPI DMA controller */
set_dma_config(CH_ATAPI_RX, config);
set_dma_x_modify(CH_ATAPI_RX, 2);
for_each_sg(qc->sg, sg, qc->n_elem, si) {
set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg));
set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1);
}
dma_desc_cpu[si].start_addr = sg_dma_address(sg);
dma_desc_cpu[si].cfg = config;
dma_desc_cpu[si].x_count = sg_dma_len(sg) >> 1;
dma_desc_cpu[si].x_modify = 2;
size += sg_dma_len(sg);
}
}
/**
* bfin_bmdma_start - Start an IDE DMA transaction
* @qc: Info associated with this ATA transaction.
*
* Note: Original code is ata_bmdma_start().
*/
/* Set the last descriptor to stop mode */
dma_desc_cpu[qc->n_elem - 1].cfg &= ~(DMAFLOW | NDSIZE);
static void bfin_bmdma_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
struct scatterlist *sg;
unsigned int si;
flush_dcache_range((unsigned int)dma_desc_cpu,
(unsigned int)dma_desc_cpu +
qc->n_elem * sizeof(struct dma_desc_array));
dev_dbg(qc->ap->dev, "in atapi dma start\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return;
/* Enable ATA DMA operation*/
set_dma_curr_desc_addr(channel, (unsigned long *)ap->bmdma_prd_dma);
set_dma_x_count(channel, 0);
set_dma_x_modify(channel, 0);
set_dma_config(channel, config);
/* start ATAPI DMA controller*/
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/*
* On blackfin arch, uncacheable memory is not
* allocated with flag GFP_DMA. DMA buffer from
* common kenel code should be flushed if WB
* data cache is enabled. Otherwise, this loop
* is an empty loop and optimized out.
*/
for_each_sg(qc->sg, sg, qc->n_elem, si) {
flush_dcache_range(sg_dma_address(sg),
sg_dma_address(sg) + sg_dma_len(sg));
}
enable_dma(CH_ATAPI_TX);
dev_dbg(qc->ap->dev, "enable udma write\n");
SSYNC();
/* Send ATA DMA write command */
/* Send ATA DMA command */
bfin_exec_command(ap, &qc->tf);
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* set ATA DMA write direction */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
| XFER_DIR));
} else {
enable_dma(CH_ATAPI_RX);
dev_dbg(qc->ap->dev, "enable udma read\n");
/* Send ATA DMA read command */
bfin_exec_command(ap, &qc->tf);
/* set ATA DMA read direction */
ATAPI_SET_CONTROL(base, (ATAPI_GET_CONTROL(base)
& ~XFER_DIR));
......@@ -913,12 +897,28 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
/* Set ATAPI state machine contorl in terminate sequence */
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
/* Set transfer length to buffer len */
for_each_sg(qc->sg, sg, qc->n_elem, si) {
ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
}
/* Set transfer length to the total size of sg buffers */
ATAPI_SET_XFER_LEN(base, size >> 1);
}
/* Enable ATA DMA operation*/
/**
* bfin_bmdma_start - Start an IDE DMA transaction
* @qc: Info associated with this ATA transaction.
*
* Note: Original code is ata_bmdma_start().
*/
static void bfin_bmdma_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
dev_dbg(qc->ap->dev, "in atapi dma start\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return;
/* start ATAPI transfer*/
if (ap->udma_mask)
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base)
| ULTRA_START);
......@@ -935,34 +935,23 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
unsigned int si;
unsigned int dir;
dev_dbg(qc->ap->dev, "in atapi dma stop\n");
if (!(ap->udma_mask || ap->mwdma_mask))
return;
/* stop ATAPI DMA controller*/
if (qc->tf.flags & ATA_TFLAG_WRITE)
if (qc->tf.flags & ATA_TFLAG_WRITE) {
dir = DMA_TO_DEVICE;
disable_dma(CH_ATAPI_TX);
else {
} else {
dir = DMA_FROM_DEVICE;
disable_dma(CH_ATAPI_RX);
if (ap->hsm_task_state & HSM_ST_LAST) {
/*
* On blackfin arch, uncacheable memory is not
* allocated with flag GFP_DMA. DMA buffer from
* common kenel code should be invalidated if
* data cache is enabled. Otherwise, this loop
* is an empty loop and optimized out.
*/
for_each_sg(qc->sg, sg, qc->n_elem, si) {
invalidate_dcache_range(
sg_dma_address(sg),
sg_dma_address(sg)
+ sg_dma_len(sg));
}
}
}
dma_unmap_sg(ap->dev, qc->sg, qc->n_elem, dir);
}
/**
......@@ -1260,6 +1249,11 @@ static void bfin_port_stop(struct ata_port *ap)
{
dev_dbg(ap->dev, "in atapi port stop\n");
if (ap->udma_mask != 0 || ap->mwdma_mask != 0) {
dma_free_coherent(ap->dev,
BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
ap->bmdma_prd,
ap->bmdma_prd_dma);
free_dma(CH_ATAPI_RX);
free_dma(CH_ATAPI_TX);
}
......@@ -1271,14 +1265,29 @@ static int bfin_port_start(struct ata_port *ap)
if (!(ap->udma_mask || ap->mwdma_mask))
return 0;
ap->bmdma_prd = dma_alloc_coherent(ap->dev,
BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
&ap->bmdma_prd_dma,
GFP_KERNEL);
if (ap->bmdma_prd == NULL) {
dev_info(ap->dev, "Unable to allocate DMA descriptor array.\n");
goto out;
}
if (request_dma(CH_ATAPI_RX, "BFIN ATAPI RX DMA") >= 0) {
if (request_dma(CH_ATAPI_TX,
"BFIN ATAPI TX DMA") >= 0)
return 0;
free_dma(CH_ATAPI_RX);
dma_free_coherent(ap->dev,
BFIN_MAX_SG_SEGMENTS * sizeof(struct dma_desc_array),
ap->bmdma_prd,
ap->bmdma_prd_dma);
}
out:
ap->udma_mask = 0;
ap->mwdma_mask = 0;
dev_err(ap->dev, "Unable to request ATAPI DMA!"
......@@ -1400,7 +1409,7 @@ static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance)
static struct scsi_host_template bfin_sht = {
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = SG_NONE,
.sg_tablesize = BFIN_MAX_SG_SEGMENTS,
.dma_boundary = ATA_DMA_BOUNDARY,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment