Commit 81fc3eb2 authored by Linus Walleij's avatar Linus Walleij

mtd: augment the "arm,versatile-flash" bindings

The bindings for the "arm,versatile-flash" device was merged in
commit 3ba7222a
"arm/versatile: Add device tree support" but was never used
for anything.

Versatile flash chips are actually just standard CFI chips,
but they have one or two bits in a system controller to control
VPP and write protection. Let's use this compatible string in
conjunction with "cfi-flash" to indicate that we have a
normal CFI flash with some extra Versatile-specific protection.

Cc: devicetree@vger.kernel.org
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b0afd44b
Flash device on ARM Versatile board
These flash chips are found in the ARM reference designs like Integrator,
Versatile, RealView, Versatile Express etc.
They are regular CFI compatible (Intel or AMD extended) flash chips with
some special write protect/VPP bits that can be controlled by the machine's
system controller.
Required properties:
- compatible : must be "arm,versatile-flash";
- compatible : must be "arm,versatile-flash", "cfi-flash";
- reg : memory address for the flash chip
- bank-width : width in bytes of flash interface.
For the rest of the properties, see mtd-physmap.txt.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.
Example:
flash@34000000 {
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x34000000 0x4000000>;
bank-width = <4>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment