drm/i915: Move VLV PHY CRI clock enable into intel_init_dpio()

The CRI clock is related to the display PHY, so the setup belongs
in intel_init_dpio().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -1367,6 +1367,10 @@ static void intel_init_dpio(struct drm_device *dev)
 	if (!IS_VALLEYVIEW(dev))
 		return;
 
+	/* Enable the CRI clock source so we can get at the display */
+	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+		   DPLL_INTEGRATED_CRI_CLK_VLV);
+
 	DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
 	/*
 	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
@@ -10788,17 +10792,10 @@ static void i915_disable_vga(struct drm_device *dev)
 
 void intel_modeset_init_hw(struct drm_device *dev)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
 	intel_prepare_ddi(dev);
 
 	intel_init_clock_gating(dev);
 
-	/* Enable the CRI clock source so we can get at the display */
-	if (IS_VALLEYVIEW(dev))
-		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-			   DPLL_INTEGRATED_CRI_CLK_VLV);
-
 	intel_init_dpio(dev);
 
 	mutex_lock(&dev->struct_mutex);