Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (152 commits)
  powerpc: Fix hard CPU IDs detection
  powerpc/pmac: Update via-pmu to new syscore_ops
  powerpc/kvm: Fix the build for 32-bit Book 3S (classic) processors
  powerpc/kvm: Fix kvmppc_core_pending_dec
  powerpc: Remove last piece of GEMINI
  powerpc: Fix for Pegasos keyboard and mouse
  powerpc: Make early memory scan more resilient to out of order nodes
  powerpc/pseries/iommu: Cleanup ddw naming
  powerpc/pseries/iommu: Find windows after kexec during boot
  powerpc/pseries/iommu: Remove ddw property when destroying window
  powerpc/pseries/iommu: Add additional checks when changing iommu mask
  powerpc/pseries/iommu: Use correct return type in dupe_ddw_if_already_created
  powerpc: Remove unused/obsolete CONFIG_XICS
  misc: Add CARMA DATA-FPGA Programmer support
  misc: Add CARMA DATA-FPGA Access Driver
  powerpc: Make IRQ_NOREQUEST last to clear, first to set
  powerpc: Integrated Flash controller device tree bindings
  powerpc/85xx: Create dts of each core in CAMP mode for P1020RDB
  powerpc/85xx: Fix PCIe IDSEL for Px020RDB
  powerpc/85xx: P2020 DTS: re-organize dts files
  ...

Documentation/devicetree/bindings/net/can/fsl-flexcan.txt

+CAN Device Tree Bindings
+------------------------
+2011 Freescale Semiconductor, Inc.
+
+fsl,flexcan-v1.0 nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller.
+
+CPI Clock- Can Protocol Interface Clock
+	This CLK_SRC bit of CTRL(control register) selects the clock source to
+	the CAN Protocol Interface(CPI) to be either the peripheral clock
+	(driven by the PLL) or the crystal oscillator clock. The selected clock
+	is the one fed to the prescaler to generate the Serial Clock (Sclock).
+	The PRESDIV field of CTRL(control register) controls a prescaler that
+	generates the Serial Clock (Sclock), whose period defines the
+	time quantum used to compose the CAN waveform.
+
+Can Engine Clock Source
+	There are two sources for CAN clock
+	- Platform Clock  It represents the bus clock
+	- Oscillator Clock
+
+	Peripheral Clock (PLL)
+	--------------
+		     |
+		    ---------		      -------------
+		    |       |CPI Clock	      | Prescaler |       Sclock
+		    |       |---------------->| (1.. 256) |------------>
+		    ---------		      -------------
+                     |  |
+	--------------  ---------------------CLK_SRC
+	Oscillator Clock
+
+- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects
+			     the peripheral clock. PLL clock is fed to the
+			     prescaler to generate the Serial Clock (Sclock).
+			     Valid values are "oscillator" and "platform"
+			     "oscillator": CAN engine clock source is oscillator clock.
+			     "platform" The CAN engine clock source is the bus clock
+		             (platform clock).
+
+- fsl,flexcan-clock-divider : for the reference and system clock, an additional
+			      clock divider can be specified.
+- clock-frequency: frequency required to calculate the bitrate for FlexCAN.
+
+Note:
+	- v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC.
+	- P1010 does not have oscillator as the Clock Source.So the default
+	  Clock Source is platform clock.
+Examples:
+
+	can0@1c000 {
+		compatible = "fsl,flexcan-v1.0";
+		reg = <0x1c000 0x1000>;
+		interrupts = <48 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,flexcan-clock-source = "platform";
+		fsl,flexcan-clock-divider = <2>;
+		clock-frequency = <fixed by u-boot>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/ifc.txt

+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+               flash controller can be found in the IFC_REV register at
+               offset zero.
+
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- reg : Offset and length of the register set for the device
+- interrupts : IFC has two interrupts. The first one is the "common"
+               interrupt(CM_EVTER_STAT), and second is the NAND interrupt
+               (NAND_EVTER_STAT).
+
+- ranges : Each range corresponds to a single chipselect, and covers
+           the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+	ifc@ffe1e000 {
+		compatible = "fsl,ifc", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x0 0xffe1e000 0 0x2000>;
+		interrupts = <16 2 19 2>;
+
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00010000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 32MB for user data */
+				reg = <0x0 0x02000000>;
+				label = "NOR Data";
+			};
+		};
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1010rdb-cpld";
+			reg = <0x3 0x0 0x000001f>;
+		};
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt

+* Freescale MPIC timers
+
+Required properties:
+- compatible: "fsl,mpic-global-timer"
+
+- reg : Contains two regions.  The first is the main timer register bank
+  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+  register (TCRx) for the group.
+
+- fsl,available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If timer-available-ranges is present, only the
+  interrupts that correspond to available timers shall be present.
+
+Example:
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer0: timer@41100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x41100 0x100 0x41300 4>;
+
+		/* Another AMP partition is using timers 0 and 1 */
+		fsl,available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+	timer1: timer@42100 {
+		compatible = "fsl,mpic-global-timer";
+		reg = <0x42100 0x100 0x42300 4>;
+		interrupts = <4 0 3 0
+		              5 0 3 0
+		              6 0 3 0
+		              7 0 3 0>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic.txt

@@ -190,7 +190,7 @@ EXAMPLE 4
 	 */
 	timer0: timer@41100 {
 		compatible = "fsl,mpic-global-timer";
-		reg = <0x41100 0x100>;
+		reg = <0x41100 0x100 0x41300 4>;
 		interrupts = <0 0 3 0
 		              1 0 3 0
 		              2 0 3 0

arch/powerpc/Kconfig

@@ -193,6 +193,12 @@ config SYS_SUPPORTS_APM_EMULATION
 	default y if PMAC_APM_EMU
 	bool
 
+config EPAPR_BOOT
+	bool
+	help
+	  Used to allow a board to specify it wants an ePAPR compliant wrapper.
+	default n
+
 config DEFAULT_UIMAGE
 	bool
 	help

arch/powerpc/Kconfig.debug

@@ -267,6 +267,11 @@ config PPC_EARLY_DEBUG_USBGECKO
 	  Select this to enable early debugging for Nintendo GameCube/Wii
 	  consoles via an external USB Gecko adapter.
 
+config PPC_EARLY_DEBUG_WSP
+	bool "Early debugging via WSP's internal UART"
+	depends on PPC_WSP
+	select PPC_UDBG_16550
+
 endchoice
 
 config PPC_EARLY_DEBUG_44x_PHYSLOW

arch/powerpc/boot/Makefile

@@ -69,7 +69,8 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c ugecon.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c epapr.c treeboot-ebony.c \
+		prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -127,7 +128,7 @@ quiet_cmd_bootas = BOOTAS  $@
       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
 quiet_cmd_bootar = BOOTAR  $@
-      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+      cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
 	$(call if_changed_dep,bootcc)
@@ -182,6 +183,7 @@ image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 
 #
 # Targets which embed a device tree blob

arch/powerpc/boot/crt0.S

@@ -6,16 +6,28 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
+ * NOTE: this code runs in 32 bit mode, is position-independent,
+ * and is packaged as ELF32.
  */
 
 #include "ppc_asm.h"
 
 	.text
-	/* a procedure descriptor used when booting this as a COFF file */
+	/* A procedure descriptor used when booting this as a COFF file.
+	 * When making COFF, this comes first in the link and we're
+	 * linked at 0x500000.
+	 */
 	.globl	_zimage_start_opd
 _zimage_start_opd:
-	.long	_zimage_start, 0, 0, 0
+	.long	0x500000, 0, 0, 0
+
+p_start:	.long	_start
+p_etext:	.long	_etext
+p_bss_start:	.long	__bss_start
+p_end:		.long	_end
+
+	.weak	_platform_stack_top
+p_pstack:	.long	_platform_stack_top
 
 	.weak	_zimage_start
 	.globl	_zimage_start
@@ -24,37 +36,65 @@ _zimage_start:
 _zimage_start_lib:
 	/* Work out the offset between the address we were linked at
 	   and the address where we're running. */
-	bl	1f
-1:	mflr	r0
-	lis	r9,1b@ha
-	addi	r9,r9,1b@l
-	subf.	r0,r9,r0
-	beq	3f		/* if running at same address as linked */
+	bl	.+4
+p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
+	/* grab the link address of the dynamic section in r11 */
+	addis	r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
+	lwz	r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
+	cmpwi	r11,0
+	beq	3f		/* if not linked -pie */
+	/* get the runtime address of the dynamic section in r12 */
+	.weak	__dynamic_start
+	addis	r12,r10,(__dynamic_start-p_base)@ha
+	addi	r12,r12,(__dynamic_start-p_base)@l
+	subf	r11,r11,r12	/* runtime - linktime offset */
+
+	/* The dynamic section contains a series of tagged entries.
+	 * We need the RELA and RELACOUNT entries. */
+RELA = 7
+RELACOUNT = 0x6ffffff9
+	li	r9,0
+	li	r0,0
+9:	lwz	r8,0(r12)	/* get tag */
+	cmpwi	r8,0
+	beq	10f		/* end of list */
+	cmpwi	r8,RELA
+	bne	11f
+	lwz	r9,4(r12)	/* get RELA pointer in r9 */
+	b	12f
+11:	addis	r8,r8,(-RELACOUNT)@ha
+	cmpwi	r8,RELACOUNT@l
+	bne	12f
+	lwz	r0,4(r12)	/* get RELACOUNT value in r0 */
+12:	addi	r12,r12,8
+	b	9b
 
-	/* The .got2 section contains a list of addresses, so add
-	   the address offset onto each entry. */
-	lis	r9,__got2_start@ha
-	addi	r9,r9,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf.	r8,r9,r8
+	/* The relocation section contains a list of relocations.
+	 * We now do the R_PPC_RELATIVE ones, which point to words
+	 * which need to be initialized with addend + offset.
+	 * The R_PPC_RELATIVE ones come first and there are RELACOUNT
+	 * of them. */
+10:	/* skip relocation if we don't have both */
+	cmpwi	r0,0
 	beq	3f
-	srwi.	r8,r8,2
-	mtctr	r8
-	add	r9,r0,r9
-2:	lwz	r8,0(r9)
-	add	r8,r8,r0
-	stw	r8,0(r9)
-	addi	r9,r9,4
+	cmpwi	r9,0
+	beq	3f
+
+	add	r9,r9,r11	/* Relocate RELA pointer */
+	mtctr	r0
+2:	lbz	r0,4+3(r9)	/* ELF32_R_INFO(reloc->r_info) */
+	cmpwi	r0,22		/* R_PPC_RELATIVE */
+	bne	3f
+	lwz	r12,0(r9)	/* reloc->r_offset */
+	lwz	r0,8(r9)	/* reloc->r_addend */
+	add	r0,r0,r11
+	stwx	r0,r11,r12
+	addi	r9,r9,12
 	bdnz	2b
 
 	/* Do a cache flush for our text, in case the loader didn't */
-3:	lis	r9,_start@ha
-	addi	r9,r9,_start@l
-	add	r9,r0,r9
-	lis	r8,_etext@ha
-	addi	r8,r8,_etext@l
-	add	r8,r0,r8
+3:	lwz	r9,p_start-p_base(r10)	/* note: these are relocated now */
+	lwz	r8,p_etext-p_base(r10)
 4:	dcbf	r0,r9
 	icbi	r0,r9
 	addi	r9,r9,0x20
@@ -64,27 +104,19 @@ _zimage_start_lib:
 	isync
 
 	/* Clear the BSS */
-	lis	r9,__bss_start@ha
-	addi	r9,r9,__bss_start@l
-	add	r9,r0,r9
-	lis	r8,_end@ha
-	addi	r8,r8,_end@l
-	add	r8,r0,r8
-	li	r10,0
-5:	stw	r10,0(r9)
+	lwz	r9,p_bss_start-p_base(r10)
+	lwz	r8,p_end-p_base(r10)
+	li	r0,0
+5:	stw	r0,0(r9)
 	addi	r9,r9,4
 	cmplw	cr0,r9,r8
 	blt	5b
 
 	/* Possibly set up a custom stack */
-.weak	_platform_stack_top
-	lis	r8,_platform_stack_top@ha
-	addi	r8,r8,_platform_stack_top@l
+	lwz	r8,p_pstack-p_base(r10)
 	cmpwi	r8,0
 	beq	6f
-	add	r8,r0,r8
 	lwz	r1,0(r8)
-	add	r1,r0,r1
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6:

arch/powerpc/boot/dts/p1020rdb.dts

@@ -9,12 +9,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p1020si.dtsi"
+
 / {
-	model = "fsl,P1020";
+	model = "fsl,P1020RDB";
 	compatible = "fsl,P1020RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		serial0 = &serial0;
@@ -26,34 +25,11 @@ aliases {
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
 	memory {
 		device_type = "memory";
 	};
 
 	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -165,88 +141,14 @@ L2switch@2,0 {
 	};
 
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p1020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p1020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p1020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -294,66 +196,7 @@ partition@900000 {
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p1020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>; // L2,256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
 		mdio@24000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-mdio";
-			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -369,10 +212,6 @@ phy1: ethernet-phy@1 {
 		};
 
 		mdio@25000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,etsec2-tbi";
-			reg = <0x25000 0x1000 0xb1030 0x4>;
 
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
@@ -381,97 +220,25 @@ tbi0: tbi-phy@11 {
 		};
 
 		enet0: ethernet@b0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
-			};
 		};
 
 		enet1: ethernet@b1000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			tbi-handle = <&tbi0>;
 			phy-connection-type = "sgmii";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
-			};
 		};
 
 		enet2: ethernet@b2000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "fsl,etsec2";
-			fsl,num_rx_queues = <0x8>;
-			fsl,num_tx_queues = <0x8>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 
-			queue-group@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb2000 0x1000>;
-				interrupts = <31 2 32 2 33 2>;
-			};
-
-			queue-group@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xb6000 0x1000>;
-				interrupts = <25 2 26 2 27 2>;
-			};
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
@@ -481,82 +248,23 @@ since U-Boot doesn't clear the status property when
 		   it enables USB2. OTOH, U-Boot does create a new node
 		   when there isn't any. So, just comment it out.
 		usb@23000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <46 0x2>;
 			phy_type = "ulpi";
 		};
 		*/
 
-		sdhci@2e000 {
-			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,p1020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
 	};
 
 	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -573,18 +281,16 @@ pcie@0 {
 	};
 
 	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;

arch/powerpc/boot/dts/p1020rdb_camp_core0.dts

+/*
+ * P1020 RDB  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		i2c@3000 {
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		mdio@24000 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+		};
+
+		enet2: ethernet@b2000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			phy_type = "ulpi";
+		};
+		*/
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};

arch/powerpc/boot/dts/p1020rdb_camp_core1.dts

+/*
+ * P1020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020si.dtsi"
+
+/ {
+	model = "fsl,P1020RDB";
+	compatible = "fsl,P1020RDB", "fsl,MPC85XXRDB-CAMP";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+		status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};

arch/powerpc/boot/dts/p1020si.dtsi

+/*
+ * P1020si Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P1020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+
+		};
+
+		enet0: ethernet@b0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@b1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@b2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
+		usb@23000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+		*/
+
+		sdhci@2e000 {
+			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1020-guts","fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+	};
+};

arch/powerpc/boot/dts/p1022ds.dts

@@ -52,7 +52,7 @@ localbus@fffe05000 {
 		#size-cells = <1>;
 		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
 		reg = <0 0xffe05000 0 0x1000>;
-		interrupts = <19 2>;
+		interrupts = <19 2 0 0>;
 
 		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
 			  0x1 0x0 0xf 0xe0000000 0x08000000
@@ -157,7 +157,7 @@ board-control@3,0 {
 			 * IRQ8 is generated if the "EVENT" switch is pressed
 			 * and PX_CTL[EVESEL] is set to 00.
 			 */
-			interrupts = <8 8>;
+			interrupts = <8 8 0 0>;
 		};
 	};
 
@@ -178,13 +178,13 @@ ecm-law@0 {
 		ecm@1000 {
 			compatible = "fsl,p1022-ecm", "fsl,ecm";
 			reg = <0x1000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		memory-controller@2000 {
 			compatible = "fsl,p1022-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		i2c@3000 {
@@ -193,7 +193,7 @@ i2c@3000 {
 			cell-index = <0>;
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 		};
 
@@ -203,7 +203,7 @@ i2c@3100 {
 			cell-index = <1>;
 			compatible = "fsl-i2c";
 			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
+			interrupts = <43 2 0 0>;
 			dfsrr;
 
 			wm8776:codec@1a {
@@ -220,7 +220,7 @@ serial0: serial@4500 {
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		serial1: serial@4600 {
@@ -229,7 +229,7 @@ serial1: serial@4600 {
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <42 2 0 0>;
 		};
 
 		spi@7000 {
@@ -238,7 +238,7 @@ spi@7000 {
 			#size-cells = <0>;
 			compatible = "fsl,espi";
 			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
+			interrupts = <59 0x2 0 0>;
 			espi,num-ss-bits = <4>;
 			mode = "cpu";
 
@@ -275,7 +275,7 @@ ssi@15000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
 			reg = <0x15000 0x100>;
-			interrupts = <75 2>;
+			interrupts = <75 2 0 0>;
 			fsl,mode = "i2s-slave";
 			codec-handle = <&wm8776>;
 			fsl,playback-dma = <&dma00>;
@@ -294,25 +294,25 @@ dma00: dma-channel@0 {
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <76 2>;
+				interrupts = <76 2 0 0>;
 			};
 			dma01: dma-channel@80 {
 				compatible = "fsl,ssi-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <77 2>;
+				interrupts = <77 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <78 2>;
+				interrupts = <78 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <79 2>;
+				interrupts = <79 2 0 0>;
 			};
 		};
 
@@ -320,7 +320,7 @@ gpio: gpio-controller@f000 {
 			#gpio-cells = <2>;
 			compatible = "fsl,mpc8572-gpio";
 			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
+			interrupts = <47 0x2 0 0>;
 			gpio-controller;
 		};
 
@@ -329,7 +329,7 @@ L2: l2-cache-controller@20000 {
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>; // L2, 256K
-			interrupts = <16 2>;
+			interrupts = <16 2 0 0>;
 		};
 
 		dma@21300 {
@@ -343,25 +343,25 @@ dma-channel@0 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
-				interrupts = <20 2>;
+				interrupts = <20 2 0 0>;
 			};
 			dma-channel@80 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
-				interrupts = <21 2>;
+				interrupts = <21 2 0 0>;
 			};
 			dma-channel@100 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
-				interrupts = <22 2>;
+				interrupts = <22 2 0 0>;
 			};
 			dma-channel@180 {
 				compatible = "fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
-				interrupts = <23 2>;
+				interrupts = <23 2 0 0>;
 			};
 		};
 
@@ -370,7 +370,7 @@ usb@22000 {
 			#size-cells = <0>;
 			compatible = "fsl-usb2-dr";
 			reg = <0x22000 0x1000>;
-			interrupts = <28 0x2>;
+			interrupts = <28 0x2 0 0>;
 			phy_type = "ulpi";
 		};
 
@@ -381,11 +381,11 @@ mdio@24000 {
 			reg = <0x24000 0x1000 0xb0030 0x4>;
 
 			phy0: ethernet-phy@0 {
-				interrupts = <3 1>;
+				interrupts = <3 1 0 0>;
 				reg = <0x1>;
 			};
 			phy1: ethernet-phy@1 {
-				interrupts = <9 1>;
+				interrupts = <9 1 0 0>;
 				reg = <0x2>;
 			};
 		};
@@ -416,13 +416,13 @@ queue-group@0{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB0000 0x1000>;
-				interrupts = <29 2 30 2 34 2>;
+				interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB4000 0x1000>;
-				interrupts = <17 2 18 2 24 2>;
+				interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
 			};
 		};
 
@@ -443,20 +443,20 @@ queue-group@0{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB1000 0x1000>;
-				interrupts = <35 2 36 2 40 2>;
+				interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 			};
 			queue-group@1{
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0xB5000 0x1000>;
-				interrupts = <51 2 52 2 67 2>;
+				interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
 			};
 		};
 
 		sdhci@2e000 {
 			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
 			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
+			interrupts = <72 0x2 0 0>;
 			fsl,sdhci-auto-cmd12;
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
@@ -467,7 +467,7 @@ crypto@30000 {
 				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
 				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
+			interrupts = <45 2 0 0 58 2 0 0>;
 			fsl,num-channels = <4>;
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x97c>;
@@ -478,14 +478,14 @@ sata@18000 {
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x18000 0x1000>;
 			cell-index = <1>;
-			interrupts = <74 0x2>;
+			interrupts = <74 0x2 0 0>;
 		};
 
 		sata@19000 {
 			compatible = "fsl,p1022-sata", "fsl,pq-sata-v2";
 			reg = <0x19000 0x1000>;
 			cell-index = <2>;
-			interrupts = <41 0x2>;
+			interrupts = <41 0x2 0 0>;
 		};
 
 		power@e0070{
@@ -496,21 +496,33 @@ power@e0070{
 		display@10000 {
 			compatible = "fsl,diu", "fsl,p1022-diu";
 			reg = <0x10000 1000>;
-			interrupts = <64 2>;
+			interrupts = <64 2 0 0>;
 		};
 
 		timer@41100 {
 			compatible = "fsl,mpic-global-timer";
-			reg = <0x41100 0x204>;
-			interrupts = <0xf7 0x2>;
+			reg = <0x41100 0x100 0x41300 4>;
+			interrupts = <0 0 3 0
+			              1 0 3 0
+			              2 0 3 0
+			              3 0 3 0>;
+		};
+
+		timer@42100 {
+			compatible = "fsl,mpic-global-timer";
+			reg = <0x42100 0x100 0x42300 4>;
+			interrupts = <4 0 3 0
+			              5 0 3 0
+			              6 0 3 0
+			              7 0 3 0>;
 		};
 
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <4>;
 			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
+			compatible = "fsl,mpic";
 			device_type = "open-pic";
 		};
 
@@ -519,14 +531,14 @@ msi@41600 {
 			reg = <0x41600 0x80>;
 			msi-available-ranges = <0 0x100>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
+				0xe0 0 0 0
+				0xe1 0 0 0
+				0xe2 0 0 0
+				0xe3 0 0 0
+				0xe4 0 0 0
+				0xe5 0 0 0
+				0xe6 0 0 0
+				0xe7 0 0 0>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
@@ -547,7 +559,7 @@ pci0: pcie@fffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -582,7 +594,7 @@ pci1: pcie@fffe0a000 {
 		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -618,7 +630,7 @@ pci2: pcie@fffe0b000 {
 		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
 		clock-frequency = <33333333>;
-		interrupts = <16 2>;
+		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */

arch/powerpc/boot/dts/p2020rdb_camp_core0.dts

@@ -14,12 +14,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet1 = &enet1;
@@ -29,91 +28,33 @@ aliases {
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@1 {
+		status = "disabled";
 		};
+
 	};
 
 	memory {
 		device_type = "memory";
 	};
 
-	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,p2020-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,p2020-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
+	localbus@ffe05000 {
+		status = "disabled";
 	};
 
+	soc@ffe00000 {
 		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+		serial1: serial@4600 {
+			status = "disabled";
 		};
 
 		spi@7000 {
-			cell-index = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,espi";
-			reg = <0x7000 0x1000>;
-			interrupts = <59 0x2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
 
 			fsl_m25p80@0 {
 				#address-cells = <1>;
@@ -161,76 +102,15 @@ partition@900000 {
 			};
 		};
 
-		gpio: gpio-controller@f000 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x100>;
-			interrupts = <47 0x2>;
-			interrupt-parent = <&mpic>;
-			gpio-controller;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,p2020-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>; // L2,512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
+		dma@c300 {
+			status = "disabled";
 		};
 
 		usb@22000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-usb2-dr";
-			reg = <0x22000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <28 0x2>;
 			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
@@ -245,29 +125,21 @@ phy1: ethernet-phy@1 {
 		};
 
 		mdio@25520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-tbi";
-			reg = <0x26520 0x20>;
-
 			tbi0: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
 		};
 
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			status = "disabled";
+		};
+
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "sgmii";
@@ -275,49 +147,12 @@ enet1: ethernet@25000 {
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
-		sdhci@2e000 {
-			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <72 0x2>;
-			interrupt-parent = <&mpic>;
-			/* Filled in by U-Boot */
-			clock-frequency = <0>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
-				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xbfe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
 
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			42 76 77 78 79 /* serial1 , dma2 */
 			29 30 34 26 /* enet0, pci1 */
@@ -326,26 +161,28 @@ mpic: pic@40000 {
 			>;
 		};
 
-		global-utilities@e0000 {
-			compatible = "fsl,p2020-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
+		msi@41600 {
+			status = "disabled";
+		};
+
+
 	};
+
+	pci0: pcie@ffe08000 {
+		status = "disabled";
 	};
 
-	pci0: pcie@ffe09000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe09000 0 0x1000>;
-		bus-range = <0 255>;
+	pci1: pcie@ffe09000 {
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
@@ -360,4 +197,8 @@ pcie@0 {
 				  0x0 0x100000>;
 		};
 	};
+
+	pci2: pcie@ffe0a000 {
+		status = "disabled";
+	};
 };

arch/powerpc/boot/dts/p2020rdb_camp_core1.dts

@@ -15,27 +15,21 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "p2020si.dtsi"
+
 / {
-	model = "fsl,P2020";
+	model = "fsl,P2020RDB";
 	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
-	#address-cells = <2>;
-	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
-		serial0 = &serial0;
+		serial0 = &serial1;
 		pci1 = &pci1;
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
+		PowerPC,P2020@0 {
+		status = "disabled";
 		};
 	};
 
@@ -43,20 +37,37 @@ memory {
 		device_type = "memory";
 	};
 
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
 	soc@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,p2020-immr", "simple-bus";
-		ranges = <0x0  0x0 0xffe00000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
+		ecm-law@0 {
+			status = "disabled";
+		};
 
-		serial0: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
 		};
 
 		dma@c300 {
@@ -96,6 +107,10 @@ dma-channel@180 {
 			};
 		};
 
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
 		L2: l2-cache-controller@20000 {
 			compatible = "fsl,p2020-l2-cache-controller";
 			reg = <0x20000 0x1000>;
@@ -104,31 +119,49 @@ L2: l2-cache-controller@20000 {
 			interrupt-parent = <&mpic>;
 		};
 
+		dma@21300 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		mdio@24520 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
 
 		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
 			fixed-link = <1 1 1000 0 0>;
 			phy-connection-type = "rgmii-id";
 
 		};
 
+		enet1: ethernet@25000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		crypto@30000 {
+			status = "disabled";
+		};
+
 		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
 			protected-sources = <
 			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
 			16 20 21 22 23 28 	/* L2, dma1, USB */
@@ -152,21 +185,32 @@ msi@41600 {
 				0xe7 0>;
 			interrupt-parent = <&mpic>;
 		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
 		};
 
-	pci1: pcie@ffe0a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		bus-range = <0 255>;
+	};
+
+	pci0: pcie@ffe08000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe0a000 {
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;

arch/powerpc/boot/dts/p2020si.dtsi

+/*
+ * P2020 Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	compatible = "fsl,P2020";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x520 0x20>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+	};
+};

arch/powerpc/boot/epapr.c

+/*
+ * Bootwrapper for ePAPR compliant firmwares
+ *
+ * Copyright 2010 David Gibson <david@gibson.dropbear.id.au>, IBM Corporation.
+ *
+ * Based on earlier bootwrappers by:
+ * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\
+ *   and
+ * Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "io.h"
+#include <libfdt.h>
+
+BSS_STACK(4096);
+
+#define EPAPR_SMAGIC	0x65504150
+#define EPAPR_EMAGIC	0x45504150
+
+static unsigned epapr_magic;
+static unsigned long ima_size;
+static unsigned long fdt_addr;
+
+static void platform_fixups(void)
+{
+	if ((epapr_magic != EPAPR_EMAGIC)
+	    && (epapr_magic != EPAPR_SMAGIC))
+		fatal("r6 contained 0x%08x instead of ePAPR magic number\n",
+		      epapr_magic);
+
+	if (ima_size < (unsigned long)_end)
+		printf("WARNING: Image loaded outside IMA!"
+		       " (_end=%p, ima_size=0x%lx)\n", _end, ima_size);
+	if (ima_size < fdt_addr)
+		printf("WARNING: Device tree address is outside IMA!"
+		       "(fdt_addr=0x%lx, ima_size=0x%lx)\n", fdt_addr,
+		       ima_size);
+	if (ima_size < fdt_addr + fdt_totalsize((void *)fdt_addr))
+		printf("WARNING: Device tree extends outside IMA!"
+		       " (fdt_addr=0x%lx, size=0x%x, ima_size=0x%lx\n",
+		       fdt_addr, fdt_totalsize((void *)fdt_addr), ima_size);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	epapr_magic = r6;
+	ima_size = r7;
+	fdt_addr = r3;
+
+	/* FIXME: we should process reserve entries */
+
+	simple_alloc_init(_end, ima_size - (unsigned long)_end, 32, 64);
+
+	fdt_init((void *)fdt_addr);
+
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}

arch/powerpc/boot/wrapper

@@ -39,6 +39,7 @@ dts=
 cacheit=
 binary=
 gzip=.gz
+pie=
 
 # cross-compilation prefix
 CROSS=
@@ -157,9 +158,10 @@ pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
-    platformo=$object/of.o
+    platformo="$object/crt0.o $object/of.o"
     lds=$object/zImage.coff.lds
     link_address='0x500000'
+    pie=
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -208,6 +210,7 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     link_address=''
+    pie=
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -244,6 +247,10 @@ gamecube|wii)
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
+epapr)
+    link_address='0x20000000'
+    pie=-pie
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -251,7 +258,7 @@ if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
 
     if [ -n "$gzip" ]; then
-        gzip -f -9 "$vmz.$$"
+        gzip -n -f -9 "$vmz.$$"
     fi
 
     if [ -n "$cacheit" ]; then
@@ -310,9 +317,9 @@ fi
 
 if [ "$platform" != "miboot" ]; then
     if [ -n "$link_address" ] ; then
-        text_start="-Ttext $link_address --defsym _start=$link_address"
+        text_start="-Ttext $link_address"
     fi
-    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
+    ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
@@ -336,7 +343,7 @@ coff)
     $objbin/hack-coff "$ofile"
     ;;
 cuboot*)
-    gzip -f -9 "$ofile"
+    gzip -n -f -9 "$ofile"
     ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
             $uboot_version -d "$ofile".gz "$ofile"
     ;;
@@ -383,6 +390,6 @@ ps3)
 
     odir="$(dirname "$ofile.bin")"
     rm -f "$odir/otheros.bld"
-    gzip --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
+    gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
     ;;
 esac

arch/powerpc/boot/zImage.coff.lds.S

@@ -3,13 +3,13 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
-  }
     _etext = .;
+  }
   . = ALIGN(4096);
   .data    :
   {
@@ -17,9 +17,7 @@ SECTIONS
     *(.data*)
     *(__builtin_*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
 
     _dtb_start = .;
     *(.kernel:dtb)

arch/powerpc/boot/zImage.lds.S

@@ -3,49 +3,64 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  _start = .;
   .text      :
   {
+    _start = .;
     *(.text)
     *(.fixup)
-  }
     _etext = .;
+  }
   . = ALIGN(4096);
   .data    :
   {
     *(.rodata*)
     *(.data*)
     *(.sdata*)
-    __got2_start = .;
     *(.got2)
-    __got2_end = .;
   }
+  .dynsym : { *(.dynsym) }
+  .dynstr : { *(.dynstr) }
+  .dynamic :
+  {
+    __dynamic_start = .;
+    *(.dynamic)
+  }
+  .hash : { *(.hash) }
+  .interp : { *(.interp) }
+  .rela.dyn : { *(.rela*) }
 
   . = ALIGN(8);
+  .kernel:dtb :
+  {
     _dtb_start = .;
-  .kernel:dtb : { *(.kernel:dtb) }
+    *(.kernel:dtb)
     _dtb_end = .;
+  }
 
   . = ALIGN(4096);
+  .kernel:vmlinux.strip :
+  {
     _vmlinux_start =  .;
-  .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) }
+    *(.kernel:vmlinux.strip)
     _vmlinux_end =  .;
+  }
 
   . = ALIGN(4096);
+  .kernel:initrd :
+  {
     _initrd_start =  .;
-  .kernel:initrd : { *(.kernel:initrd) }
+    *(.kernel:initrd)
     _initrd_end =  .;
+  }
 
   . = ALIGN(4096);
-  _edata  =  .;
-
-  . = ALIGN(4096);
-  __bss_start = .;
   .bss       :
   {
+    _edata  =  .;
+    __bss_start = .;
     *(.sbss)
     *(.bss)
-  }
-  . = ALIGN(4096);
+    *(COMMON)
     _end = . ;
+  }
 }

arch/powerpc/configs/83xx/mpc8313_rdb_defconfig

@@ -104,7 +104,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/83xx/mpc8315_rdb_defconfig

@@ -101,7 +101,6 @@ CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/85xx/mpc8540_ads_defconfig

@@ -58,7 +58,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/85xx/mpc8560_ads_defconfig

@@ -59,7 +59,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/85xx/mpc85xx_cds_defconfig

@@ -63,7 +63,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig

@@ -168,7 +168,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/c2k_defconfig

@@ -132,8 +132,8 @@ CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_IND=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/e55xx_smp_defconfig

@@ -6,10 +6,10 @@ CONFIG_NR_CPUS=2
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
@@ -25,8 +25,32 @@ CONFIG_P5020_DS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BINFMT_MISC=m
-CONFIG_SPARSE_IRQ=y
 # CONFIG_PCI is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -34,6 +58,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_LEGACY=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
@@ -64,22 +91,14 @@ CONFIG_NLS=y
 CONFIG_NLS_UTF8=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=m
 CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_TALITOS=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -204,7 +204,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -206,7 +206,6 @@ CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/mpc86xx_defconfig

@@ -171,7 +171,6 @@ CONFIG_MAC_PARTITION=y
 CONFIG_CRC_T10DIF=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y

arch/powerpc/configs/pmac32_defconfig

@@ -112,8 +112,8 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRTTY_SIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/ppc6xx_defconfig

@@ -351,8 +351,8 @@ CONFIG_VLSI_FIR=m
 CONFIG_VIA_FIR=m
 CONFIG_MCS_FIR=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/ps3_defconfig

@@ -52,8 +52,8 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6=y
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m

arch/powerpc/configs/pseries_defconfig

@@ -146,12 +146,18 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
 CONFIG_ATA=y
 # CONFIG_ATA_SFF is not set
@@ -197,6 +203,8 @@ CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_MLX4_EN=m
+CONFIG_QLGE=m
+CONFIG_BE2NET=m
 CONFIG_PPP=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m

arch/powerpc/include/asm/cputable.h

@@ -157,6 +157,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_476_DD2			ASM_CONST(0x0000000000010000)
 #define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
 #define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_DEBUG_LVL_EXC		ASM_CONST(0x0000000000080000)
 #define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
 #define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
 #define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
@@ -178,22 +179,18 @@ extern const char *powerpc_base_platform;
 #define LONG_ASM_CONST(x)		0
 #endif
 
-#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
-#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
-#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+
+#define CPU_FTR_HVMODE_206		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_CFAR			LONG_ASM_CONST(0x0000001000000000)
 #define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
 #define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
 #define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
 #define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
-#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
-#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
 #define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
-#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
-#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
 #define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
 #define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
 #define CPU_FTR_CP_USE_DCBTZ		LONG_ASM_CONST(0x0040000000000000)
@@ -202,12 +199,14 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_STCX_CHECKS_ADDRESS	LONG_ASM_CONST(0x0200000000000000)
 #define CPU_FTR_POPCNTB			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_POPCNTD			LONG_ASM_CONST(0x0800000000000000)
+#define CPU_FTR_ICSWX			LONG_ASM_CONST(0x1000000000000000)
 
 #ifndef __ASSEMBLY__
 
-#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
-				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
-				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
+#define MMU_FTR_PPCAS_ARCH_V2 	(MMU_FTR_SLB | MMU_FTR_TLBIEL | \
+				 MMU_FTR_16M_PAGE)
 
 /* We only set the altivec features if the kernel was compiled with altivec
  * support
@@ -387,7 +386,8 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_DBELL)
 #define CPU_FTRS_E5500	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \
 	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \
-	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+	    CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_DEBUG_LVL_EXC)
 #define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
 
 /* 64-bit CPUs */
@@ -407,44 +407,45 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_STCX_CHECKS_ADDRESS | \
-	    CPU_FTR_POPCNTB)
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
 #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR)
 #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_HVMODE_206 |\
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
-	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD)
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
+	    CPU_FTR_PAUSE_ZERO  | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
 	    CPU_FTR_UNALIGNED_LD_STD)
 #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
-	    CPU_FTR_PPCAS_ARCH_V2 | \
-	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE)
 #define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
 
+#define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \
+		     CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN)
+
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500)
+#define CPU_FTRS_POSSIBLE	(CPU_FTRS_E5500 | CPU_FTRS_A2)
 #else
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
 	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
 	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+	    CPU_FTR_VSX)
 #endif
 #else
 enum {
@@ -487,7 +488,7 @@ enum {
 
 #ifdef __powerpc64__
 #ifdef CONFIG_PPC_BOOK3E
-#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500)
+#define CPU_FTRS_ALWAYS		(CPU_FTRS_E5500 & CPU_FTRS_A2)
 #else
 #define CPU_FTRS_ALWAYS		\
 	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\

arch/powerpc/include/asm/cputhreads.h

@@ -37,16 +37,16 @@ extern cpumask_t threads_core_mask;
  * This can typically be used for things like IPI for tlb invalidations
  * since those need to be done only once per core/TLB
  */
-static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
 {
 	cpumask_t	tmp, res;
 	int		i;
 
-	res = CPU_MASK_NONE;
+	cpumask_clear(&res);
 	for (i = 0; i < NR_CPUS; i += threads_per_core) {
-		cpus_shift_left(tmp, threads_core_mask, i);
-		if (cpus_intersects(threads, tmp))
-			cpu_set(i, res);
+		cpumask_shift_left(&tmp, &threads_core_mask, i);
+		if (cpumask_intersects(threads, &tmp))
+			cpumask_set_cpu(i, &res);
 	}
 	return res;
 }
@@ -58,7 +58,7 @@ static inline int cpu_nr_cores(void)
 
 static inline cpumask_t cpu_online_cores_map(void)
 {
-	return cpu_thread_mask_to_cores(cpu_online_map);
+	return cpu_thread_mask_to_cores(cpu_online_mask);
 }
 
 #ifdef CONFIG_SMP

arch/powerpc/include/asm/dbell.h

@@ -27,9 +27,8 @@ enum ppc_dbell {
 	PPC_G_DBELL_MC = 4,	/* guest mcheck doorbell */
 };
 
-extern void doorbell_message_pass(int target, int msg);
+extern void doorbell_cause_ipi(int cpu, unsigned long data);
 extern void doorbell_exception(struct pt_regs *regs);
-extern void doorbell_check_self(void);
 extern void doorbell_setup_this_cpu(void);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)

arch/powerpc/include/asm/emulated_ops.h

@@ -52,6 +52,10 @@ extern struct ppc_emulated {
 #ifdef CONFIG_VSX
 	struct ppc_emulated_entry vsx;
 #endif
+#ifdef CONFIG_PPC64
+	struct ppc_emulated_entry mfdscr;
+	struct ppc_emulated_entry mtdscr;
+#endif
 } ppc_emulated;
 
 extern u32 ppc_warn_emulated;

arch/powerpc/include/asm/exception-64s.h

@@ -46,6 +46,7 @@
 #define EX_CCR		60
 #define EX_R3		64
 #define EX_LR		72
+#define EX_CFAR		80
 
 /*
  * We're short on space and time in the exception prolog, so we can't
@@ -56,30 +57,40 @@
 #define LOAD_HANDLER(reg, label)					\
 	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
+/* Exception register prefixes */
+#define EXC_HV	H
+#define EXC_STD
+
 #define EXCEPTION_PROLOG_1(area)					\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+	GET_PACA(r13);							\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG_SCRATCH0;					\
+	BEGIN_FTR_SECTION_NESTED(66);					\
+	mfspr	r10,SPRN_CFAR;						\
+	std	r10,area+EX_CFAR(r13);					\
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		\
+	GET_SCRATCH0(r9);						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-#define EXCEPTION_PROLOG_PSERIES_1(label)				\
+#define __EXCEPTION_PROLOG_PSERIES_1(label, h)				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define EXCEPTION_PROLOG_PSERIES_1(label, h) \
+	__EXCEPTION_PROLOG_PSERIES_1(label, h)
 
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+#define EXCEPTION_PROLOG_PSERIES(area, label, h)			\
 	EXCEPTION_PROLOG_1(area);					\
-	EXCEPTION_PROLOG_PSERIES_1(label);
+	EXCEPTION_PROLOG_PSERIES_1(label, h);
 
 /*
  * The common exception prolog is used for all except a few exceptions
@@ -98,10 +109,11 @@
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
 1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
+	blt+	cr1,3f;			/* abort if it is		*/ \
+	li	r1,(n);			/* will be reloaded later	*/ \
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	std	r3,area+EX_R3(r13);					   \
+	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@@ -123,6 +135,10 @@
 	std	r9,GPR11(r1);						   \
 	std	r10,GPR12(r1);						   \
 	std	r11,GPR13(r1);						   \
+	BEGIN_FTR_SECTION_NESTED(66);					   \
+	ld	r10,area+EX_CFAR(r13);					   \
+	std	r10,ORIG_GPR3(r1);					   \
+	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
@@ -143,57 +159,62 @@
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
+#define STD_EXCEPTION_PSERIES(loc, vec, label)		\
+	. = loc;					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	DO_KVM	n;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);		/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_STD)
 
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
+#define STD_EXCEPTION_HV(loc, vec, label)		\
+	. = loc;					\
+	.globl label##_hv;				\
+label##_hv:						\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG_SCRATCH0,r20;	/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG_SCRATCH0;	/* restore r20 */ \
-	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+	DO_KVM	vec;					\
+	SET_SCRATCH0(r13);	/* save r13 */		\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, EXC_HV)
 
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
+#define __MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
 	HMT_MEDIUM;							\
-	DO_KVM	n;							\
-	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
-	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
+	DO_KVM	vec;							\
+	SET_SCRATCH0(r13);    /* save r13 */				\
+	GET_PACA(r13);							\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG_SCRATCH0;					\
+	beq	masked_##h##interrupt;					\
+	GET_SCRATCH0(r10);						\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
 	LOAD_HANDLER(r12,label##_common)				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
+	mtspr	SPRN_##h##SRR0,r12;					\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	mtspr	SPRN_##h##SRR1,r10;					\
+	h##rfid;							\
 	b	.	/* prevent speculative execution */
+#define _MASKABLE_EXCEPTION_PSERIES(vec, label, h)			\
+	__MASKABLE_EXCEPTION_PSERIES(vec, label, h)
+
+#define MASKABLE_EXCEPTION_PSERIES(loc, vec, label)			\
+	. = loc;							\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_STD)
+
+#define MASKABLE_EXCEPTION_HV(loc, vec, label)				\
+	. = loc;							\
+	.globl label##_hv;						\
+label##_hv:								\
+	_MASKABLE_EXCEPTION_PSERIES(vec, label, EXC_HV)
 
 #ifdef CONFIG_PPC_ISERIES
 #define DISABLE_INTS				\

arch/powerpc/include/asm/feature-fixups.h

@@ -49,7 +49,7 @@ label##5:							\
 	FTR_ENTRY_OFFSET label##2b-label##5b;			\
 	FTR_ENTRY_OFFSET label##3b-label##5b;			\
 	FTR_ENTRY_OFFSET label##4b-label##5b;			\
-	.ifgt (label##4b-label##3b)-(label##2b-label##1b);	\
+	.ifgt (label##4b- label##3b)-(label##2b- label##1b);	\
 	.error "Feature section else case larger than body";	\
 	.endif;							\
 	.popsection;
@@ -146,6 +146,19 @@ label##5:							\
 
 #ifndef __ASSEMBLY__
 
+#define ASM_FTR_IF(section_if, section_else, msk, val)	\
+	stringify_in_c(BEGIN_FTR_SECTION)			\
+	section_if "; "						\
+	stringify_in_c(FTR_SECTION_ELSE)			\
+	section_else "; "					\
+	stringify_in_c(ALT_FTR_SECTION_END((msk), (val)))
+
+#define ASM_FTR_IFSET(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), (msk))
+
+#define ASM_FTR_IFCLR(section_if, section_else, msk)	\
+	ASM_FTR_IF(section_if, section_else, (msk), 0)
+
 #define ASM_MMU_FTR_IF(section_if, section_else, msk, val)	\
 	stringify_in_c(BEGIN_MMU_FTR_SECTION)			\
 	section_if "; "						\

arch/powerpc/include/asm/firmware.h

@@ -47,6 +47,7 @@
 #define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
 #define FW_FEATURE_CMO		ASM_CONST(0x0000000002000000)
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 
 #ifndef __ASSEMBLY__
 
@@ -60,7 +61,7 @@ enum {
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
 		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
-		FW_FEATURE_CMO | FW_FEATURE_VPHN,
+		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
 	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,

arch/powerpc/include/asm/hvcall.h

@@ -102,6 +102,7 @@
 #define H_ANDCOND		(1UL<<(63-33))
 #define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
 #define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_COALESCE_CAND	(1UL<<(63-42))	/* page is a good candidate for coalescing */
 #define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
 #define H_COPY_PAGE		(1UL<<(63-49))
 #define H_N			(1UL<<(63-61))
@@ -234,6 +235,7 @@
 #define H_GET_MPP		0x2D4
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
 #define H_BEST_ENERGY		0x2F4
+#define H_GET_MPP_X		0x314
 #define MAX_HCALL_OPCODE	H_BEST_ENERGY
 
 #ifndef __ASSEMBLY__
@@ -312,6 +314,16 @@ struct hvcall_mpp_data {
 
 int h_get_mpp(struct hvcall_mpp_data *);
 
+struct hvcall_mpp_x_data {
+	unsigned long coalesced_bytes;
+	unsigned long pool_coalesced_bytes;
+	unsigned long pool_purr_cycles;
+	unsigned long pool_spurr_cycles;
+	unsigned long reserved[3];
+};
+
+int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);
+
 #ifdef CONFIG_PPC_PSERIES
 extern int CMO_PrPSP;
 extern int CMO_SecPSP;

arch/powerpc/platforms/cell/io-workarounds.h → arch/powerpc/include/asm/io-workarounds.h

@@ -31,7 +31,6 @@ struct iowa_bus {
 	void   *private;
 };
 
-void __devinit io_workaround_init(void);
 void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
 				 int (*)(struct iowa_bus *, void *), void *);
 struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);

arch/powerpc/include/asm/io.h

@@ -2,6 +2,8 @@
 #define _ASM_POWERPC_IO_H
 #ifdef __KERNEL__
 
+#define ARCH_HAS_IOREMAP_WC
+
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -481,10 +483,16 @@ __do_out_asm(_rec_outl, "stwbrx")
 				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
 #endif /* !CONFIG_EEH */
 
-#ifdef CONFIG_PPC_INDIRECT_IO
-#define DEF_PCI_HOOK(x)		x
+#ifdef CONFIG_PPC_INDIRECT_PIO
+#define DEF_PCI_HOOK_pio(x)	x
+#else
+#define DEF_PCI_HOOK_pio(x)	NULL
+#endif
+
+#ifdef CONFIG_PPC_INDIRECT_MMIO
+#define DEF_PCI_HOOK_mem(x)	x
 #else
-#define DEF_PCI_HOOK(x)		NULL
+#define DEF_PCI_HOOK_mem(x)	NULL
 #endif
 
 /* Structure containing all the hooks */
@@ -504,7 +512,7 @@ extern struct ppc_pci_io {
 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
 static inline ret name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)	\
 		return ppc_pci_io.name al;			\
 	return __do_##name al;					\
 }
@@ -512,7 +520,7 @@ static inline ret name at					\
 #define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
 static inline void name at					\
 {								\
-	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+	if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL)		\
 		ppc_pci_io.name al;				\
 	else							\
 		__do_##name al;					\
@@ -616,12 +624,13 @@ static inline void iosync(void)
  * * ioremap is the standard one and provides non-cacheable guarded mappings
  *   and can be hooked by the platform via ppc_md
  *
- * * ioremap_flags allows to specify the page flags as an argument and can
- *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
- *   same thing as ioremap_flags.
+ * * ioremap_prot allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md.
  *
  * * ioremap_nocache is identical to ioremap
  *
+ * * ioremap_wc enables write combining
+ *
  * * iounmap undoes such a mapping and can be hooked
  *
  * * __ioremap_at (and the pending __iounmap_at) are low level functions to
@@ -629,7 +638,7 @@ static inline void iosync(void)
  *   currently be hooked. Must be page aligned.
  *
  * * __ioremap is the low level implementation used by ioremap and
- *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   ioremap_prot and cannot be hooked (but can be used by a hook on one
  *   of the previous ones)
  *
  * * __ioremap_caller is the same as above but takes an explicit caller
@@ -640,10 +649,10 @@ static inline void iosync(void)
  *
  */
 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
+extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
 				  unsigned long flags);
+extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
 #define ioremap_nocache(addr, size)	ioremap((addr), (size))
-#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
 
 extern void iounmap(volatile void __iomem *addr);
 

arch/powerpc/include/asm/io_event_irq.h

+/*
+ * Copyright 2010, 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_IO_EVENT_IRQ_H
+#define _ASM_POWERPC_IO_EVENT_IRQ_H
+
+#include <linux/types.h>
+#include <linux/notifier.h>
+
+#define PSERIES_IOEI_RPC_MAX_LEN 216
+
+#define PSERIES_IOEI_TYPE_ERR_DETECTED		0x01
+#define PSERIES_IOEI_TYPE_ERR_RECOVERED		0x02
+#define PSERIES_IOEI_TYPE_EVENT			0x03
+#define PSERIES_IOEI_TYPE_RPC_PASS_THRU		0x04
+
+#define PSERIES_IOEI_SUBTYPE_NOT_APP		0x00
+#define PSERIES_IOEI_SUBTYPE_REBALANCE_REQ	0x01
+#define PSERIES_IOEI_SUBTYPE_NODE_ONLINE	0x03
+#define PSERIES_IOEI_SUBTYPE_NODE_OFFLINE	0x04
+#define PSERIES_IOEI_SUBTYPE_DUMP_SIZE_CHANGE	0x05
+#define PSERIES_IOEI_SUBTYPE_TORRENT_IRV_UPDATE	0x06
+#define PSERIES_IOEI_SUBTYPE_TORRENT_HFI_CFGED	0x07
+
+#define PSERIES_IOEI_SCOPE_NOT_APP		0x00
+#define PSERIES_IOEI_SCOPE_RIO_HUB		0x36
+#define PSERIES_IOEI_SCOPE_RIO_BRIDGE		0x37
+#define PSERIES_IOEI_SCOPE_PHB			0x38
+#define PSERIES_IOEI_SCOPE_EADS_GLOBAL		0x39
+#define PSERIES_IOEI_SCOPE_EADS_SLOT		0x3A
+#define PSERIES_IOEI_SCOPE_TORRENT_HUB		0x3B
+#define PSERIES_IOEI_SCOPE_SERVICE_PROC		0x51
+
+/* Platform Event Log Format, Version 6, data portition of IO event section */
+struct pseries_io_event {
+	uint8_t event_type;		/* 0x00 IO-Event Type		*/
+	uint8_t rpc_data_len;		/* 0x01 RPC data length		*/
+	uint8_t scope;			/* 0x02 Error/Event Scope	*/
+	uint8_t event_subtype;		/* 0x03 I/O-Event Sub-Type	*/
+	uint32_t drc_index;		/* 0x04 DRC Index		*/
+	uint8_t rpc_data[PSERIES_IOEI_RPC_MAX_LEN];
+					/* 0x08 RPC Data (0-216 bytes,	*/
+					/* padded to 4 bytes alignment)	*/
+};
+
+extern struct atomic_notifier_head pseries_ioei_notifier_list;
+
+#endif /* _ASM_POWERPC_IO_EVENT_IRQ_H */

arch/powerpc/include/asm/irq.h

@@ -88,9 +88,6 @@ struct irq_host_ops {
 	/* Dispose of such a mapping */
 	void (*unmap)(struct irq_host *h, unsigned int virq);
 
-	/* Update of such a mapping  */
-	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
-
 	/* Translate device-tree interrupt specifier from raw format coming
 	 * from the firmware to a irq_hw_number_t (interrupt line number) and
 	 * type (sense) that can be passed to set_irq_type(). In the absence
@@ -128,19 +125,10 @@ struct irq_host {
 	struct device_node	*of_node;
 };
 
-/* The main irq map itself is an array of NR_IRQ entries containing the
- * associate host and irq number. An entry with a host of NULL is free.
- * An entry can be allocated if it's free, the allocator always then sets
- * hwirq first to the host's invalid irq number and then fills ops.
- */
-struct irq_map_entry {
-	irq_hw_number_t	hwirq;
-	struct irq_host	*host;
-};
-
-extern struct irq_map_entry irq_map[NR_IRQS];
-
+struct irq_data;
+extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
 extern irq_hw_number_t virq_to_hw(unsigned int virq);
+extern bool virq_is_host(unsigned int virq, struct irq_host *host);
 
 /**
  * irq_alloc_host - Allocate a new irq_host data structure

arch/powerpc/include/asm/kexec.h

@@ -76,7 +76,7 @@ extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
 extern cpumask_t cpus_in_sr;
 static inline int kexec_sr_activated(int cpu)
 {
-	return cpu_isset(cpu,cpus_in_sr);
+	return cpumask_test_cpu(cpu, &cpus_in_sr);
 }
 
 struct kimage;

arch/powerpc/include/asm/kvm_asm.h

@@ -59,6 +59,7 @@
 #define BOOK3S_INTERRUPT_INST_SEGMENT	0x480
 #define BOOK3S_INTERRUPT_EXTERNAL	0x500
 #define BOOK3S_INTERRUPT_EXTERNAL_LEVEL	0x501
+#define BOOK3S_INTERRUPT_EXTERNAL_HV	0x502
 #define BOOK3S_INTERRUPT_ALIGNMENT	0x600
 #define BOOK3S_INTERRUPT_PROGRAM	0x700
 #define BOOK3S_INTERRUPT_FP_UNAVAIL	0x800

arch/powerpc/include/asm/kvm_book3s_asm.h

@@ -34,6 +34,7 @@
 	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL_HV) || \
 	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
 	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
 	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \

arch/powerpc/include/asm/lppaca.h

@@ -210,6 +210,8 @@ struct dtl_entry {
 #define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
 #define N_DISPATCH_LOG		(DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
 
+extern struct kmem_cache *dtl_cache;
+
 /*
  * When CONFIG_VIRT_CPU_ACCOUNTING = y, the cpu accounting code controls
  * reading from the dispatch trace log.  If other code wants to consume

arch/powerpc/include/asm/machdep.h

@@ -29,21 +29,6 @@ struct file;
 struct pci_controller;
 struct kimage;
 
-#ifdef CONFIG_SMP
-struct smp_ops_t {
-	void  (*message_pass)(int target, int msg);
-	int   (*probe)(void);
-	void  (*kick_cpu)(int nr);
-	void  (*setup_cpu)(int nr);
-	void  (*bringup_done)(void);
-	void  (*take_timebase)(void);
-	void  (*give_timebase)(void);
-	int   (*cpu_disable)(void);
-	void  (*cpu_die)(unsigned int nr);
-	int   (*cpu_bootable)(unsigned int nr);
-};
-#endif
-
 struct machdep_calls {
 	char		*name;
 #ifdef CONFIG_PPC64
@@ -267,6 +252,7 @@ struct machdep_calls {
 
 extern void e500_idle(void);
 extern void power4_idle(void);
+extern void power7_idle(void);
 extern void ppc6xx_idle(void);
 extern void book3e_idle(void);
 
@@ -311,12 +297,6 @@ extern sys_ctrler_t sys_ctrler;
 
 #endif /* CONFIG_PPC_PMAC */
 
-#ifdef CONFIG_SMP
-/* Poor default implementations */
-extern void __devinit smp_generic_give_timebase(void);
-extern void __devinit smp_generic_take_timebase(void);
-#endif /* CONFIG_SMP */
-
 
 /* Functions to produce codes on the leds.
  * The SRC code should be unique for the message category and should

arch/powerpc/include/asm/mmu-book3e.h

@@ -43,6 +43,7 @@
 #define MAS0_TLBSEL(x)		(((x) << 28) & 0x30000000)
 #define MAS0_ESEL(x)		(((x) << 16) & 0x0FFF0000)
 #define MAS0_NV(x)		((x) & 0x00000FFF)
+#define MAS0_ESEL_MASK		0x0FFF0000
 #define MAS0_HES		0x00004000
 #define MAS0_WQ_ALLWAYS		0x00000000
 #define MAS0_WQ_COND		0x00001000
@@ -137,6 +138,21 @@
 #define MMUCSR0_TLB2PS	0x00078000	/* TLB2 Page Size */
 #define MMUCSR0_TLB3PS	0x00780000	/* TLB3 Page Size */
 
+/* MMUCFG bits */
+#define MMUCFG_MAVN_NASK	0x00000003
+#define MMUCFG_MAVN_V1_0	0x00000000
+#define MMUCFG_MAVN_V2_0	0x00000001
+#define MMUCFG_NTLB_MASK	0x0000000c
+#define MMUCFG_NTLB_SHIFT	2
+#define MMUCFG_PIDSIZE_MASK	0x000007c0
+#define MMUCFG_PIDSIZE_SHIFT	6
+#define MMUCFG_TWC		0x00008000
+#define MMUCFG_LRAT		0x00010000
+#define MMUCFG_RASIZE_MASK	0x00fe0000
+#define MMUCFG_RASIZE_SHIFT	17
+#define MMUCFG_LPIDSIZE_MASK	0x0f000000
+#define MMUCFG_LPIDSIZE_SHIFT	24
+
 /* TLBnCFG encoding */
 #define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
 #define TLBnCFG_HES		0x00002000	/* HW select supported */
@@ -229,6 +245,10 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 extern int mmu_linear_psize;
 extern int mmu_vmemmap_psize;
 
+#ifdef CONFIG_PPC64
+extern unsigned long linear_map_top;
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */

arch/powerpc/include/asm/mmu-hash64.h

@@ -408,6 +408,7 @@ static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
 
 typedef unsigned long mm_context_id_t;
+struct spinlock;
 
 typedef struct {
 	mm_context_id_t id;
@@ -423,6 +424,11 @@ typedef struct {
 #ifdef CONFIG_PPC_SUBPAGE_PROT
 	struct subpage_prot_table spt;
 #endif /* CONFIG_PPC_SUBPAGE_PROT */
+#ifdef CONFIG_PPC_ICSWX
+	struct spinlock *cop_lockp; /* guard acop and cop_pid */
+	unsigned long acop;	/* mask of enabled coprocessor types */
+	unsigned int cop_pid;	/* pid value used with coprocessors */
+#endif /* CONFIG_PPC_ICSWX */
 } mm_context_t;
 
 

arch/powerpc/include/asm/mmu.h

@@ -56,11 +56,6 @@
  */
 #define MMU_FTR_NEED_DTLB_SW_LRU	ASM_CONST(0x00200000)
 
-/* This indicates that the processor uses the ISA 2.06 server tlbie
- * mnemonics
- */
-#define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
-
 /* Enable use of TLB reservation.  Processor should support tlbsrx.
  * instruction and MAS0[WQ].
  */
@@ -70,6 +65,53 @@
  */
 #define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
 
+/* MMU is SLB-based
+ */
+#define MMU_FTR_SLB			ASM_CONST(0x02000000)
+
+/* Support 16M large pages
+ */
+#define MMU_FTR_16M_PAGE		ASM_CONST(0x04000000)
+
+/* Supports TLBIEL variant
+ */
+#define MMU_FTR_TLBIEL			ASM_CONST(0x08000000)
+
+/* Supports tlbies w/o locking
+ */
+#define MMU_FTR_LOCKLESS_TLBIE		ASM_CONST(0x10000000)
+
+/* Large pages can be marked CI
+ */
+#define MMU_FTR_CI_LARGE_PAGE		ASM_CONST(0x20000000)
+
+/* 1T segments available
+ */
+#define MMU_FTR_1T_SEGMENT		ASM_CONST(0x40000000)
+
+/* Doesn't support the B bit (1T segment) in SLBIE
+ */
+#define MMU_FTR_NO_SLBIE_B		ASM_CONST(0x80000000)
+
+/* MMU feature bit sets for various CPUs */
+#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2	\
+	MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2
+#define MMU_FTRS_POWER4		MMU_FTRS_DEFAULT_HPTE_ARCH_V2
+#define MMU_FTRS_PPC970		MMU_FTRS_POWER4
+#define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE
+#define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
+				MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
+#define MMU_FTRS_A2		MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX | \
+				MMU_FTR_USE_TLBIVAX_BCAST | \
+				MMU_FTR_LOCK_BCAST_INVAL | \
+				MMU_FTR_USE_TLBRSRV | \
+				MMU_FTR_USE_PAIRED_MAS | \
+				MMU_FTR_TLBIEL | \
+				MMU_FTR_16M_PAGE
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 

arch/powerpc/include/asm/mmu_context.h

@@ -32,6 +32,10 @@ extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
+extern void switch_cop(struct mm_struct *next);
+extern int use_cop(unsigned long acop, struct mm_struct *mm);
+extern void drop_cop(unsigned long acop, struct mm_struct *mm);
+
 /*
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched.c
@@ -55,6 +59,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	if (prev == next)
 		return;
 
+#ifdef CONFIG_PPC_ICSWX
+	/* Switch coprocessor context only if prev or next uses a coprocessor */
+	if (prev->context.acop || next->context.acop)
+		switch_cop(next);
+#endif /* CONFIG_PPC_ICSWX */
+
 	/* We must stop all altivec streams before changing the HW
 	 * context
 	 */
@@ -67,7 +77,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * sub architectures.
 	 */
 #ifdef CONFIG_PPC_STD_MMU_64
-	if (cpu_has_feature(CPU_FTR_SLB))
+	if (mmu_has_feature(MMU_FTR_SLB))
 		switch_slb(tsk, next);
 	else
 		switch_stab(tsk, next);

arch/powerpc/include/asm/mpic.h

@@ -262,6 +262,7 @@ struct mpic
 #ifdef CONFIG_SMP
 	struct irq_chip		hc_ipi;
 #endif
+	struct irq_chip		hc_tm;
 	const char		*name;
 	/* Flags */
 	unsigned int		flags;
@@ -280,7 +281,7 @@ struct mpic
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
-	unsigned int		timer_vecs[4];
+	unsigned int		timer_vecs[8];
 
 	/* Spurious vector to program into unused sources */
 	unsigned int		spurious_vec;
@@ -368,6 +369,8 @@ struct mpic
  * NOTE: This flag trumps MPIC_WANTS_RESET.
  */
 #define MPIC_NO_RESET			0x00004000
+/* Freescale MPIC (compatible includes "fsl,mpic") */
+#define MPIC_FSL			0x00008000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000

arch/powerpc/include/asm/pSeries_reconfig.h

@@ -18,13 +18,18 @@
 extern int pSeries_reconfig_notifier_register(struct notifier_block *);
 extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
 extern struct blocking_notifier_head pSeries_reconfig_chain;
+/* Not the best place to put this, will be fixed when we move some
+ * of the rtas suspend-me stuff to pseries */
+extern void pSeries_coalesce_init(void);
 #else /* !CONFIG_PPC_PSERIES */
 static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
 {
 	return 0;
 }
 static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+static inline void pSeries_coalesce_init(void) { }
 #endif /* CONFIG_PPC_PSERIES */
 
+
 #endif /* __KERNEL__ */
 #endif /* _PPC64_PSERIES_RECONFIG_H */

arch/powerpc/include/asm/paca.h

@@ -92,9 +92,9 @@ struct paca_struct {
 	 * Now, starting in cacheline 2, the exception save areas
 	 */
 	/* used for most interrupts/exceptions */
-	u64 exgen[10] __attribute__((aligned(0x80)));
-	u64 exmc[10];		/* used for machine checks */
-	u64 exslb[10];		/* used for SLB/segment table misses
+	u64 exgen[11] __attribute__((aligned(0x80)));
+	u64 exmc[11];		/* used for machine checks */
+	u64 exslb[11];		/* used for SLB/segment table misses
  				 * on the linear mapping */
 	/* SLB related definitions */
 	u16 vmalloc_sllp;
@@ -106,7 +106,8 @@ struct paca_struct {
 	pgd_t *pgd;			/* Current PGD */
 	pgd_t *kernel_pgd;		/* Kernel PGD */
 	u64 exgen[8] __attribute__((aligned(0x80)));
-	u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+	/* We can have up to 3 levels of reentrancy in the TLB miss handler */
+	u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80)));
 	u64 exmc[8];		/* used for machine checks */
 	u64 excrit[8];		/* used for crit interrupts */
 	u64 exdbg[8];		/* used for debug interrupts */
@@ -125,7 +126,7 @@ struct paca_struct {
 	struct task_struct *__current;	/* Pointer to current */
 	u64 kstack;			/* Saved Kernel stack addr */
 	u64 stab_rr;			/* stab/slb round-robin counter */
-	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_r1;			/* r1 save for RTAS calls or PM */
 	u64 saved_msr;			/* MSR saved here by enter_rtas */
 	u16 trap_save;			/* Used when bad stack is encountered */
 	u8 soft_enabled;		/* irq soft-enable flag */