Commit 84db00f2 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by Jakub Kicinski

net: dsa: sja1105: allow SGMII PCS configuration to be per port

The SJA1105 R and S switches have 1 SGMII port (port 4). Because there
is only one such port, there is no "port" parameter in the configuration
code for the SGMII PCS.

However, the SJA1110 can have up to 4 SGMII ports, each with its own
SGMII register map. So we need to generalize the logic.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 15074a36
......@@ -898,36 +898,43 @@ static int sja1105_parse_dt(struct sja1105_private *priv,
return rc;
}
static int sja1105_sgmii_read(struct sja1105_private *priv, int pcs_reg)
static int sja1105_sgmii_read(struct sja1105_private *priv, int port,
int pcs_reg)
{
const struct sja1105_regs *regs = priv->info->regs;
u32 val;
int rc;
rc = sja1105_xfer_u32(priv, SPI_READ, regs->sgmii + pcs_reg, &val,
NULL);
if (port != SJA1105_SGMII_PORT)
return -ENODEV;
rc = sja1105_xfer_u32(priv, SPI_READ, regs->sgmii + pcs_reg,
&val, NULL);
if (rc < 0)
return rc;
return val;
}
static int sja1105_sgmii_write(struct sja1105_private *priv, int pcs_reg,
u16 pcs_val)
static int sja1105_sgmii_write(struct sja1105_private *priv, int port,
int pcs_reg, u16 pcs_val)
{
const struct sja1105_regs *regs = priv->info->regs;
u32 val = pcs_val;
int rc;
rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->sgmii + pcs_reg, &val,
NULL);
if (port != SJA1105_SGMII_PORT)
return -ENODEV;
rc = sja1105_xfer_u32(priv, SPI_WRITE, regs->sgmii + pcs_reg,
&val, NULL);
if (rc < 0)
return rc;
return val;
}
static void sja1105_sgmii_pcs_config(struct sja1105_private *priv,
static void sja1105_sgmii_pcs_config(struct sja1105_private *priv, int port,
bool an_enabled, bool an_master)
{
u16 ac = SJA1105_AC_AUTONEG_MODE_SGMII;
......@@ -936,27 +943,29 @@ static void sja1105_sgmii_pcs_config(struct sja1105_private *priv,
* stop the clock during LPI mode, make the MAC reconfigure
* autonomously after PCS autoneg is done, flush the internal FIFOs.
*/
sja1105_sgmii_write(priv, SJA1105_DC1, SJA1105_DC1_EN_VSMMD1 |
sja1105_sgmii_write(priv, port, SJA1105_DC1,
SJA1105_DC1_EN_VSMMD1 |
SJA1105_DC1_CLOCK_STOP_EN |
SJA1105_DC1_MAC_AUTO_SW |
SJA1105_DC1_INIT);
/* DIGITAL_CONTROL_2: No polarity inversion for TX and RX lanes */
sja1105_sgmii_write(priv, SJA1105_DC2, SJA1105_DC2_TX_POL_INV_DISABLE);
sja1105_sgmii_write(priv, port, SJA1105_DC2,
SJA1105_DC2_TX_POL_INV_DISABLE);
/* AUTONEG_CONTROL: Use SGMII autoneg */
if (an_master)
ac |= SJA1105_AC_PHY_MODE | SJA1105_AC_SGMII_LINK;
sja1105_sgmii_write(priv, SJA1105_AC, ac);
sja1105_sgmii_write(priv, port, SJA1105_AC, ac);
/* BASIC_CONTROL: enable in-band AN now, if requested. Otherwise,
* sja1105_sgmii_pcs_force_speed must be called later for the link
* to become operational.
*/
if (an_enabled)
sja1105_sgmii_write(priv, MII_BMCR,
sja1105_sgmii_write(priv, port, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
}
static void sja1105_sgmii_pcs_force_speed(struct sja1105_private *priv,
int speed)
int port, int speed)
{
int pcs_speed;
......@@ -974,7 +983,7 @@ static void sja1105_sgmii_pcs_force_speed(struct sja1105_private *priv,
dev_err(priv->ds->dev, "Invalid speed %d\n", speed);
return;
}
sja1105_sgmii_write(priv, MII_BMCR, pcs_speed | BMCR_FULLDPLX);
sja1105_sgmii_write(priv, port, MII_BMCR, pcs_speed | BMCR_FULLDPLX);
}
/* Convert link speed from SJA1105 to ethtool encoding */
......@@ -1115,7 +1124,8 @@ static void sja1105_mac_config(struct dsa_switch *ds, int port,
}
if (is_sgmii)
sja1105_sgmii_pcs_config(priv, phylink_autoneg_inband(mode),
sja1105_sgmii_pcs_config(priv, port,
phylink_autoneg_inband(mode),
false);
}
......@@ -1138,7 +1148,7 @@ static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
sja1105_adjust_port_config(priv, port, speed);
if (sja1105_supports_sgmii(priv, port) && !phylink_autoneg_inband(mode))
sja1105_sgmii_pcs_force_speed(priv, speed);
sja1105_sgmii_pcs_force_speed(priv, port, speed);
sja1105_inhibit_tx(priv, BIT(port), false);
}
......@@ -1191,7 +1201,7 @@ static int sja1105_mac_pcs_get_state(struct dsa_switch *ds, int port,
int ais;
/* Read the vendor-specific AUTONEG_INTR_STATUS register */
ais = sja1105_sgmii_read(priv, SJA1105_AIS);
ais = sja1105_sgmii_read(priv, port, SJA1105_AIS);
if (ais < 0)
return ais;
......@@ -1873,11 +1883,11 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
struct ptp_system_timestamp ptp_sts_before;
struct ptp_system_timestamp ptp_sts_after;
int speed_mbps[SJA1105_MAX_NUM_PORTS];
u16 bmcr[SJA1105_MAX_NUM_PORTS] = {0};
struct sja1105_mac_config_entry *mac;
struct dsa_switch *ds = priv->ds;
s64 t1, t2, t3, t4;
s64 t12, t34;
u16 bmcr = 0;
int rc, i;
s64 now;
......@@ -1893,10 +1903,10 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
for (i = 0; i < ds->num_ports; i++) {
speed_mbps[i] = sja1105_speed[mac[i].speed];
mac[i].speed = SJA1105_SPEED_AUTO;
}
if (sja1105_supports_sgmii(priv, SJA1105_SGMII_PORT))
bmcr = sja1105_sgmii_read(priv, MII_BMCR);
if (sja1105_supports_sgmii(priv, i))
bmcr[i] = sja1105_sgmii_read(priv, i, MII_BMCR);
}
/* No PTP operations can run right now */
mutex_lock(&priv->ptp_data.lock);
......@@ -1943,27 +1953,30 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
goto out;
for (i = 0; i < ds->num_ports; i++) {
bool an_enabled;
rc = sja1105_adjust_port_config(priv, i, speed_mbps[i]);
if (rc < 0)
goto out;
}
if (sja1105_supports_sgmii(priv, SJA1105_SGMII_PORT)) {
bool an_enabled = !!(bmcr & BMCR_ANENABLE);
if (!sja1105_supports_sgmii(priv, i))
continue;
an_enabled = !!(bmcr[i] & BMCR_ANENABLE);
sja1105_sgmii_pcs_config(priv, an_enabled, false);
sja1105_sgmii_pcs_config(priv, i, an_enabled, false);
if (!an_enabled) {
int speed = SPEED_UNKNOWN;
if (bmcr & BMCR_SPEED1000)
if (bmcr[i] & BMCR_SPEED1000)
speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
else if (bmcr[i] & BMCR_SPEED100)
speed = SPEED_100;
else
speed = SPEED_10;
sja1105_sgmii_pcs_force_speed(priv, speed);
sja1105_sgmii_pcs_force_speed(priv, i, speed);
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment