Commit 8525a235 authored by Shobhit Kumar's avatar Shobhit Kumar Committed by Jani Nikula

drm/i915: vlv_prepare_pll is only needed in case of non DSI interfaces

For MIPI, DSI PLL is configured separately in vlv_configure_dsi_pll
during the DSI enable sequence

Causing WARN dump otherwise in dpio_reads

v2: Add IS_CHERRYVIEW check as suggested by Ville
Signed-off-by: default avatarShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
parent 5b5ffff0
......@@ -4564,6 +4564,9 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
if (intel_crtc->active)
return;
is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
if (!is_dsi && !IS_CHERRYVIEW(dev))
vlv_prepare_pll(intel_crtc);
/* Set up the display plane register */
......@@ -4598,8 +4601,6 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
if (encoder->pre_pll_enable)
encoder->pre_pll_enable(encoder);
is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
if (!is_dsi) {
if (IS_CHERRYVIEW(dev))
chv_enable_pll(intel_crtc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment