[MIPS] SMTC: Fix SMTC dyntick support.

Rework of SMTC support to make it work with the new clock event system,
allowing "tickless" operation, and to make it compatible with the use of
the "wait_irqoff" idle loop.  The new clocking scheme means that the
previously optional IPI instant replay mechanism is now required, and has
been made more robust.
Signed-off-by: Kevin D. Kissell <kevink@paralogos.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1403,7 +1403,6 @@ config MIPS_MT_SMTC
 	depends on CPU_MIPS32_R2
 	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
-	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -1451,32 +1450,17 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
-config MIPS_MT_SMTC_INSTANT_REPLAY
-	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC && !PREEMPT
-	default y
-	help
-	  SMTC pseudo-interrupts between TCs are deferred and queued
-	  if the target TC is interrupt-inhibited (IXMT). In the first
-	  SMTC prototypes, these queued IPIs were serviced on return
-	  to user mode, or on entry into the kernel idle loop. The
-	  INSTANT_REPLAY option dispatches them as part of local_irq_restore()
-	  processing, which adds runtime overhead (hence the option to turn
-	  it off), but ensures that IPIs are handled promptly even under
-	  heavy I/O interrupt load.
-
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
-	default y
+	default n
 	help
 	  To support multiple TC microthreads acting as "CPUs" within
 	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
 	  during interrupt handling. To support legacy drivers and interrupt
 	  controller management code, SMTC has a "backstop" to track and
 	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead. Disable it only if you know
-	  what you are doing.
+	  impact on interrupt service overhead.
 
 config MIPS_MT_SMTC_IRQAFF
 	bool "Support IRQ affinity API"
@@ -1486,10 +1470,8 @@ config MIPS_MT_SMTC_IRQAFF
 	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
 	  for SMTC Linux kernel. Requires platform support, of which
 	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
-	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
-	  interrupt dispatch, and should be used only if you know what
-	  you are doing.
+	  platform code.  Adds some overhead to interrupt dispatch, and
+	  should be used only if you know what you are doing.
 
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"

arch/mips/kernel/Makefile

@@ -10,6 +10,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o

arch/mips/kernel/cevt-r4k.c

@@ -12,6 +12,14 @@
 
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC
 
 static int mips_next_event(unsigned long delta,
                            struct clock_event_device *evt)
@@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }
 
-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }
 
-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;
 
-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC
 
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@@ -107,65 +78,16 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };
 
-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
-
-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
 
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }
 
@@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }
 
-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */
 
+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;
 
 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;
 
@@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }
 
+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;
 
@@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;
 
 	clockevents_register_device(cd);
@@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)
 
 	cp0_timer_irq_installed = 1;
 
-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif
 
 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */

arch/mips/kernel/cevt-smtc.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register.  The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register.  Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days.  If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	unsigned long timestamp, reference, previous;
+	unsigned long nextcomp = 0L;
+	int vpe = current_cpu_data.vpe_id;
+	int cpu = smp_processor_id();
+	local_irq_save(flags);
+	mtflags = dmt();
+
+	/*
+	 * Maintain the per-TC virtual timer
+	 * and program the per-VPE shared Count register
+	 * as appropriate here...
+	 */
+	reference = (unsigned long)read_c0_count();
+	timestamp = MAKEVALID(reference + delta);
+	/*
+	 * To really model the clock, we have to catch the case
+	 * where the current next-in-VPE timestamp is the old
+	 * timestamp for the calling CPE, but the new value is
+	 * in fact later.  In that case, we have to do a full
+	 * scan and discover the new next-in-VPE CPU id and
+	 * timestamp.
+	 */
+	previous = smtc_nexttime[vpe][cpu];
+	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+	    && IS_SOONER(previous, timestamp, reference)) {
+		int i;
+		int soonest = cpu;
+
+		/*
+		 * Update timestamp array here, so that new
+		 * value gets considered along with those of
+		 * other virtual CPUs on the VPE.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+		for_each_online_cpu(i) {
+			if (ISVALID(smtc_nexttime[vpe][i])
+			    && IS_SOONER(smtc_nexttime[vpe][i],
+				smtc_nexttime[vpe][soonest], reference)) {
+				    soonest = i;
+			}
+		}
+		smtc_nextinvpe[vpe] = soonest;
+		nextcomp = smtc_nexttime[vpe][soonest];
+	/*
+	 * Otherwise, we don't have to process the whole array rank,
+	 * we just have to see if the event horizon has gotten closer.
+	 */
+	} else {
+		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+		    IS_SOONER(timestamp,
+			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+			    smtc_nextinvpe[vpe] = cpu;
+			    nextcomp = timestamp;
+		}
+		/*
+		 * Since next-in-VPE may me the same as the executing
+		 * virtual CPU, we update the array *after* checking
+		 * its value.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+	}
+
+	/*
+	 * It may be that, in fact, we don't need to update Compare,
+	 * but if we do, we want to make sure we didn't fall into
+	 * a crack just behind Count.
+	 */
+	if (ISVALID(nextcomp)) {
+		write_c0_compare(nextcomp);
+		ehb();
+		/*
+		 * We never return an error, we just make sure
+		 * that we trigger the handlers as quickly as
+		 * we can if we fell behind.
+		 */
+		while ((nextcomp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX) {
+			nextcomp += CATCHUP_INCREMENT;
+			write_c0_compare(nextcomp);
+			ehb();
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	int cpu;
+	struct clock_event_device *cd;
+	unsigned long nextstamp = 0L;
+	unsigned long reference;
+
+
+repeat:
+	for_each_online_cpu(cpu) {
+	    /*
+	     * Find virtual CPUs within the current VPE who have
+	     * unserviced timer requests whose time is now past.
+	     */
+	    local_irq_save(flags);
+	    mtflags = dmt();
+	    if (cpu_data[cpu].vpe_id == vpe &&
+		ISVALID(smtc_nexttime[vpe][cpu])) {
+		reference = (unsigned long)read_c0_count();
+		if ((smtc_nexttime[vpe][cpu] - reference)
+			 > (unsigned long)LONG_MAX) {
+			    smtc_nexttime[vpe][cpu] = 0L;
+			    emt(mtflags);
+			    local_irq_restore(flags);
+			    /*
+			     * We don't send IPIs to ourself.
+			     */
+			    if (cpu != smp_processor_id()) {
+				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+			    } else {
+				cd = &per_cpu(mips_clockevent_device, cpu);
+				cd->event_handler(cd);
+			    }
+		} else {
+			/* Local to VPE but Valid Time not yet reached. */
+			if (!ISVALID(nextstamp) ||
+			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+			    reference)) {
+				smtc_nextinvpe[vpe] = cpu;
+				nextstamp = smtc_nexttime[vpe][cpu];
+			}
+			emt(mtflags);
+			local_irq_restore(flags);
+		}
+	    } else {
+		emt(mtflags);
+		local_irq_restore(flags);
+
+	    }
+	}
+	/* Reprogram for interrupt at next soonest timestamp for VPE */
+	if (ISVALID(nextstamp)) {
+		write_c0_compare(nextstamp);
+		ehb();
+		if ((nextstamp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX)
+				goto repeat;
+	}
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+	handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		smtc_distribute_timer(cpu_data[cpu].vpe_id);
+	}
+	return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+	uint64_t mips_freq = mips_hpt_frequency;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+	int i;
+	int j;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+	if (cpu == 0) {
+		for (i = 0; i < num_possible_cpus(); i++) {
+			smtc_nextinvpe[i] = 0;
+			for (j = 0; j < num_possible_cpus(); j++)
+				smtc_nexttime[i][j] = 0L;
+		}
+		/*
+		 * SMTC also can't have the usablility test
+		 * run by secondary TCs once Compare is in use.
+		 */
+		if (!c0_compare_int_usable())
+			return -ENXIO;
+	}
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+	cd->shift		= 32;
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	/*
+	 * On SMTC we only want to do the data structure
+	 * initialization and IRQ setup once.
+	 */
+	if (cpu)
+		return 0;
+	/*
+	 * And we need the hwmask associated with the c0_compare
+	 * vector to be initialized.
+	 */
+	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}

arch/mips/kernel/cpu-probe.c

@@ -54,14 +54,18 @@ extern void r4k_wait(void);
  * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
  * using this version a gamble.
  */
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
 {
 	local_irq_disable();
 	if (!need_resched())
-		__asm__("	.set	mips3		\n"
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
 			"	wait			\n"
-			"	.set	mips0		\n");
+			"	.set	pop		\n");
 	local_irq_enable();
+	__asm__(" 	.globl __pastwait	\n"
+		"__pastwait:			\n");
+	return;
 }
 
 /*

arch/mips/kernel/genex.S

@@ -282,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
 	and	t0, a0, t1
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 	mfc0	t2, CP0_TCCONTEXT
-	or	t0, t0, t2
-	mtc0	t0, CP0_TCCONTEXT
+	or	t2, t0, t2
+	mtc0	t2, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
 	xor	t1, t1, t0
 	mtc0	t1, CP0_STATUS

arch/mips/kernel/smtc.c

-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
 
 #include <linux/clockchips.h>
 #include <linux/kernel.h>
@@ -21,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
 #include <asm/smtc_proc.h>
 
 /*
@@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];
 
 asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
 
-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];
 
 /*
  * Number of InterProcessor Interrupt (IPI) message buffers to allocate
@@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
  * phys_cpu_present_map and the logical/physical mappings.
  */
 
-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
 {
 	int i, ntcs;
 
@@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 			| TCSTATUS_A);
-	write_tc_c0_tccontext(0);
+	/*
+	 * TCContext gets an offset from the base of the IPIQ array
+	 * to be used in low-level code to detect the presence of
+	 * an active IPI queue
+	 */
+	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
 	/* In general, all TCs should have the same cpu_data indications */
@@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;
+	/* Multi-core SMTC hasn't been tested, but be prepared */
+	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 }
 
+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */
+
+#define CP0_SKEW 8
 
-void mipsmt_prepare_cpus(void)
+void smtc_prepare_cpus(int cpus)
 {
 	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 	unsigned long flags;
@@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
 		IPIQ[i].head = IPIQ[i].tail = NULL;
 		spin_lock_init(&IPIQ[i].lock);
 		IPIQ[i].depth = 0;
-		atomic_set(&ipi_timer_latch[i], 0);
 	}
 
 	/* cpu_data index starts at zero */
 	cpu = 0;
 	cpu_data[cpu].vpe_id = 0;
 	cpu_data[cpu].tc_id = 0;
+	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 	cpu++;
 
 	/* Report on boot-time options */
@@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
 			write_vpe_c0_compare(0);
 			/* Propagate Config7 */
 			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count());
+			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+			ehb();
 		}
 		/* enable multi-threading within VPE */
 		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	/*
-	 * Start timer on secondary VPEs if necessary.
-	 * plat_timer_setup has already have been invoked by init/main
-	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and in ascending order
-	 * to across available VPEs.
-	 */
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE)
-	    != cpu_data[smp_processor_id() - 1].vpe_id)){
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-	}
-
 	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
 {
+	int cpu = smp_processor_id();
+
+	/*
+	 * Lowest-numbered CPU per VPE starts a clock tick.
+	 * Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and
+	 * in ascending order across available VPEs.
+	 */
+	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }
@@ -755,6 +778,8 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	struct smtc_ipi *pipi;
 	unsigned long flags;
 	int mtflags;
+	unsigned long tcrestart;
+	extern void r4k_wait_irqoff(void), __pastwait(void);
 
 	if (cpu == smp_processor_id()) {
 		printk("Cannot Send IPI to self!\n");
@@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	pipi->arg = (void *)action;
 	pipi->dest = cpu;
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		if (type == SMTC_CLOCK_TICK)
-			atomic_inc(&ipi_timer_latch[cpu]);
 		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
@@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 
 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 			/*
-			 * Spin-waiting here can deadlock,
-			 * so we queue the message for the target TC.
+			 * If we're in the the irq-off version of the wait
+			 * loop, we need to force exit from the wait and
+			 * do a direct post of the IPI.
+			 */
+			if (cpu_wait == r4k_wait_irqoff) {
+				tcrestart = read_tc_c0_tcrestart();
+				if (tcrestart >= (unsigned long)r4k_wait_irqoff
+				    && tcrestart < (unsigned long)__pastwait) {
+					write_tc_c0_tcrestart(__pastwait);
+					tcstatus &= ~TCSTATUS_IXMT;
+					write_tc_c0_tcstatus(tcstatus);
+					goto postdirect;
+				}
+			}
+			/*
+			 * Otherwise we queue the message for the target TC
+			 * to pick up when he does a local_irq_restore()
 			 */
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
-			/* Try to reduce redundant timer interrupt messages */
-			if (type == SMTC_CLOCK_TICK) {
-			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
-				smtc_ipi_nq(&freeIPIq, pipi);
-				return;
-			    }
-			}
 			smtc_ipi_nq(&IPIQ[cpu], pipi);
 		} else {
-			if (type == SMTC_CLOCK_TICK)
-				atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
 			post_direct_ipi(cpu, pipi);
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
@@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
 	smp_call_function_interrupt();
 }
 
-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
 
 void ipi_decode(struct smtc_ipi *pipi)
 {
@@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int ticks;
-
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
 		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
-		cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-		ticks = atomic_read(&ipi_timer_latch[cpu]);
-		atomic_sub(ticks, &ipi_timer_latch[cpu]);
-		while (ticks) {
-			cd->event_handler(cd);
-			ticks--;
-		}
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
 		irq_exit();
 		break;
 
@@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
 	}
 }
 
+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
 void deferred_smtc_ipi(void)
 {
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-/* DEBUG */
-	int q = smp_processor_id();
+	int cpu = smp_processor_id();
 
 	/*
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
+	 * If irq_disabled when this was called, then any IPIs queued
+	 * after we test last will be taken on the next irq_enable/restore.
+	 * If interrupts were enabled, then any IPIs added after the
+	 * last test will be taken directly.
 	 */
-	if (IPIQ[q].head != NULL) {
-		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
-			/* ipi_decode() should be called with interrupts off */
-			local_irq_save(flags);
+
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It may be possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		if (pipi != NULL)
 			ipi_decode(pipi);
-			local_irq_restore(flags);
-		}
+		/*
+		 * The use of the __raw_local restore isn't
+		 * as obviously necessary here as in smtc_ipi_replay(),
+		 * but it's more efficient, given that we're already
+		 * running down the IPI queue.
+		 */
+		__raw_local_irq_restore(flags);
 	}
 }
 
@@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
 
 /*
  * SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled.  We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
  */
 
-static void __smtc_ipi_replay(void)
+ /*
+  * smtc_ipi_replay is called from raw_local_irq_restore
+  */
+
+void smtc_ipi_replay(void)
 {
 	unsigned int cpu = smp_processor_id();
 
 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * If we use the smtc_ipi_qdepth() macro, we'll get an
-	 * exact number - but we'll also disable interrupts
-	 * and create a window of failure where a new IPI gets
-	 * queued after we test the depth but before we re-enable
-	 * interrupts. So long as IXMT never gets set, however,
 	 * we should be OK:  If we pick up something and dispatch
 	 * it here, that's great. If we see nothing, but concurrent
 	 * with this operation, another TC sends us an IPI, IXMT
 	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.
+	 * and not a pseudo-pseudo interrupt.  The important thing
+	 * is to do the last check for queued message *after* the
+	 * re-enabling of interrupts.
 	 */
-	if (IPIQ[cpu].depth > 0) {
-		while (1) {
-			struct smtc_ipi_q *q = &IPIQ[cpu];
-			struct smtc_ipi *pipi;
-			extern void self_ipi(struct smtc_ipi *);
-
-			spin_lock(&q->lock);
-			pipi = __smtc_ipi_dq(q);
-			spin_unlock(&q->lock);
-			if (!pipi)
-				break;
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
 
+		/*
+		 * It's just possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		/*
+		 ** But use a raw restore here to avoid recursion.
+		 */
+		__raw_local_irq_restore(flags);
+
+		if (pipi) {
 			self_ipi(pipi);
 			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }
 
-void smtc_ipi_replay(void)
-{
-	raw_local_irq_disable();
-	__smtc_ipi_replay();
-}
-
 EXPORT_SYMBOL(smtc_ipi_replay);
 
 void smtc_idle_loop_hook(void)
@@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
 		}
 	}
 
-	/*
-	 * Now that we limit outstanding timer IPIs, check for hung TC
-	 */
-	for (tc = 0; tc < NR_CPUS; tc++) {
-		/* Don't check ourself - we'll dequeue IPIs just below */
-		if ((tc != smp_processor_id()) &&
-		    atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
-		    if (clock_hang_reported[tc] == 0) {
-			pdb_msg += sprintf(pdb_msg,
-				"TC %d looks hung with timer latch at %d\n",
-				tc, atomic_read(&ipi_timer_latch[tc]));
-			clock_hang_reported[tc]++;
-			}
-		}
-	}
 	emt(mtflags);
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
-	/*
-	 * Replay any accumulated deferred IPIs. If "Instant Replay"
-	 * is in use, there should never be any.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	{
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__smtc_ipi_replay();
-		local_irq_restore(flags);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+	smtc_ipi_replay();
 }
 
 void smtc_soft_dump(void)
@@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
 		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
 	}
 	smtc_ipi_qdump();
-	printk("Timer IPI Backlogs:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
-	}
 	printk("%d Recoveries of \"stolen\" FPU\n",
 	       atomic_read(&smtc_fpu_recoveries));
 }

arch/mips/mti-malta/malta-smtc.c

@@ -84,12 +84,17 @@ static void msmtc_cpus_done(void)
 
 static void __init msmtc_smp_setup(void)
 {
-	mipsmt_build_cpu_map(0);
+	/*
+	 * we won't get the definitive value until
+	 * we've run smtc_prepare_cpus later, but
+	 * we would appear to need an upper bound now.
+	 */
+	smp_num_siblings = smtc_build_cpu_map(0);
 }
 
 static void __init msmtc_prepare_cpus(unsigned int max_cpus)
 {
-	mipsmt_prepare_cpus();
+	smtc_prepare_cpus(max_cpus);
 }
 
 struct plat_smp_ops msmtc_smp_ops = {

include/asm-mips/cevt-r4k.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Kevin D. Kissell
+ */
+
+/*
+ * Definitions used for common event timer implementation
+ * for MIPS 4K-type processors and their MIPS MT variants.
+ * Avoids unsightly extern declarations in C files.
+ */
+#ifndef __ASM_CEVT_R4K_H
+#define __ASM_CEVT_R4K_H
+
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+
+void mips_event_handler(struct clock_event_device *dev);
+int c0_compare_int_usable(void);
+void mips_set_clock_mode(enum clock_event_mode, struct clock_event_device *);
+irqreturn_t c0_compare_interrupt(int, void *);
+
+extern struct irqaction c0_compare_irqaction;
+extern int cp0_timer_irq_installed;
+
+/*
+ * Possibly handle a performance counter interrupt.
+ * Return true if the timer interrupt should not be checked
+ */
+
+static inline int handle_perf_irq(int r2)
+{
+	/*
+	 * The performance counter overflow interrupt may be shared with the
+	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
+	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
+	 * and we can't reliably determine if a counter interrupt has also
+	 * happened (!r2) then don't check for a timer interrupt.
+	 */
+	return (cp0_perfcount_irq < 0) &&
+		perf_irq() == IRQ_HANDLED &&
+		!r2;
+}
+
+#endif /* __ASM_CEVT_R4K_H */

include/asm-mips/irqflags.h

@@ -38,8 +38,17 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm");
 
+extern void smtc_ipi_replay(void);
+
 static inline void raw_local_irq_enable(void)
 {
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of call overhead on each local_irq_enable()
+	 */
+	smtc_ipi_replay();
+#endif
 	__asm__ __volatile__(
 		"raw_local_irq_enable"
 		: /* no outputs */
@@ -47,6 +56,7 @@ static inline void raw_local_irq_enable(void)
 		: "memory");
 }
 
+
 /*
  * For cli() we have to insert nops to make sure that the new value
  * has actually arrived in the status register before the end of this
@@ -185,15 +195,14 @@ __asm__(
 	"	.set	pop						\n"
 	"	.endm							\n");
 
-extern void smtc_ipi_replay(void);
 
 static inline void raw_local_irq_restore(unsigned long flags)
 {
 	unsigned long __tmp1;
 
-#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
+#ifdef CONFIG_MIPS_MT_SMTC
 	/*
-	 * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred
+	 * SMTC kernel needs to do a software replay of queued
 	 * IPIs, at the cost of branch and call overhead on each
 	 * local_irq_restore()
 	 */
@@ -208,6 +217,17 @@ static inline void raw_local_irq_restore(unsigned long flags)
 		: "memory");
 }
 
+static inline void __raw_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"raw_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
 static inline int raw_irqs_disabled_flags(unsigned long flags)
 {
 #ifdef CONFIG_MIPS_MT_SMTC

include/asm-mips/smtc.h

@@ -6,6 +6,7 @@
  */
 
 #include <asm/mips_mt.h>
+#include <asm/smtc_ipi.h>
 
 /*
  * System-wide SMTC status information
@@ -38,14 +39,15 @@ struct mm_struct;
 struct task_struct;
 
 void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
-
+void self_ipi(struct smtc_ipi *);
 void smtc_flush_tlb_asid(unsigned long asid);
-extern int mipsmt_build_cpu_map(int startslot);
-extern void mipsmt_prepare_cpus(void);
+extern int smtc_build_cpu_map(int startslot);
+extern void smtc_prepare_cpus(int cpus);
 extern void smtc_smp_finish(void);
 extern void smtc_boot_secondary(int cpu, struct task_struct *t);
 extern void smtc_cpus_done(void);
 
+
 /*
  * Sharing the TLB between multiple VPEs means that the
  * "random" index selection function is not allowed to