Commit 85cc12f8 authored by Alexei Starovoitov's avatar Alexei Starovoitov

Merge branch 'bpf_cubic'

Martin KaFai Lau says:

====================
This set adds bpf_cubic.c example.  It was separated from the
earlier BPF STRUCT_OPS series.  Some highlights since the
last post:

1. It is based on EricD recent fixes to the kernel tcp_cubic. [1]
2. The bpf jiffies reading helper is inlined by the verifier.
   Different from the earlier version, it only reads jiffies alone
   and does not do usecs/jiffies conversion.
3. The bpf .kconfig map is used to read CONFIG_HZ.

[1]: https://patchwork.ozlabs.org/cover/1215066/

v3:
- Remove __weak from CONFIG_HZ in patch 3. (Andrii)

v2:
- Move inlining to fixup_bpf_calls() in patch 1. (Daniel)
- It is inlined for 64 BITS_PER_LONG and jit_requested
  as the map_gen_lookup().  Other cases could be
  considered together with map_gen_lookup() if needed.
- Use usec resolution in bictcp_update() calculation in patch 3.
  usecs_to_jiffies() is then removed().  (Eric)
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
parents 1b2fd38d 6de4a9c4
......@@ -1414,6 +1414,7 @@ extern const struct bpf_func_proto bpf_get_local_storage_proto;
extern const struct bpf_func_proto bpf_strtol_proto;
extern const struct bpf_func_proto bpf_strtoul_proto;
extern const struct bpf_func_proto bpf_tcp_sock_proto;
extern const struct bpf_func_proto bpf_jiffies64_proto;
/* Shared helpers among cBPF and eBPF. */
void bpf_user_rnd_init_once(void);
......
......@@ -2886,6 +2886,12 @@ union bpf_attr {
* **-EPERM** if no permission to send the *sig*.
*
* **-EAGAIN** if bpf program can try again.
*
* u64 bpf_jiffies64(void)
* Description
* Obtain the 64bit jiffies
* Return
* The 64 bit jiffies
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
......@@ -3005,7 +3011,8 @@ union bpf_attr {
FN(probe_read_user_str), \
FN(probe_read_kernel_str), \
FN(tcp_send_ack), \
FN(send_signal_thread),
FN(send_signal_thread), \
FN(jiffies64),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
......
......@@ -2137,6 +2137,7 @@ const struct bpf_func_proto bpf_map_pop_elem_proto __weak;
const struct bpf_func_proto bpf_map_peek_elem_proto __weak;
const struct bpf_func_proto bpf_spin_lock_proto __weak;
const struct bpf_func_proto bpf_spin_unlock_proto __weak;
const struct bpf_func_proto bpf_jiffies64_proto __weak;
const struct bpf_func_proto bpf_get_prandom_u32_proto __weak;
const struct bpf_func_proto bpf_get_smp_processor_id_proto __weak;
......
......@@ -11,6 +11,7 @@
#include <linux/uidgid.h>
#include <linux/filter.h>
#include <linux/ctype.h>
#include <linux/jiffies.h>
#include "../../lib/kstrtox.h"
......@@ -312,6 +313,17 @@ void copy_map_value_locked(struct bpf_map *map, void *dst, void *src,
preempt_enable();
}
BPF_CALL_0(bpf_jiffies64)
{
return get_jiffies_64();
}
const struct bpf_func_proto bpf_jiffies64_proto = {
.func = bpf_jiffies64,
.gpl_only = false,
.ret_type = RET_INTEGER,
};
#ifdef CONFIG_CGROUPS
BPF_CALL_0(bpf_get_current_cgroup_id)
{
......
......@@ -9445,6 +9445,30 @@ static int fixup_bpf_calls(struct bpf_verifier_env *env)
goto patch_call_imm;
}
if (prog->jit_requested && BITS_PER_LONG == 64 &&
insn->imm == BPF_FUNC_jiffies64) {
struct bpf_insn ld_jiffies_addr[2] = {
BPF_LD_IMM64(BPF_REG_0,
(unsigned long)&jiffies),
};
insn_buf[0] = ld_jiffies_addr[0];
insn_buf[1] = ld_jiffies_addr[1];
insn_buf[2] = BPF_LDX_MEM(BPF_DW, BPF_REG_0,
BPF_REG_0, 0);
cnt = 3;
new_prog = bpf_patch_insn_data(env, i + delta, insn_buf,
cnt);
if (!new_prog)
return -ENOMEM;
delta += cnt - 1;
env->prog = prog = new_prog;
insn = new_prog->insnsi + i + delta;
continue;
}
patch_call_imm:
fn = env->ops->get_func_proto(insn->imm, env->prog);
/* all functions that have prototype and verifier allowed
......
......@@ -5923,6 +5923,8 @@ bpf_base_func_proto(enum bpf_func_id func_id)
return &bpf_spin_unlock_proto;
case BPF_FUNC_trace_printk:
return bpf_get_trace_printk_proto();
case BPF_FUNC_jiffies64:
return &bpf_jiffies64_proto;
default:
return NULL;
}
......
......@@ -2886,6 +2886,12 @@ union bpf_attr {
* **-EPERM** if no permission to send the *sig*.
*
* **-EAGAIN** if bpf program can try again.
*
* u64 bpf_jiffies64(void)
* Description
* Obtain the 64bit jiffies
* Return
* The 64 bit jiffies
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
......@@ -3005,7 +3011,8 @@ union bpf_attr {
FN(probe_read_user_str), \
FN(probe_read_kernel_str), \
FN(tcp_send_ack), \
FN(send_signal_thread),
FN(send_signal_thread), \
FN(jiffies64),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
......
......@@ -6,13 +6,28 @@
#include <linux/types.h>
#include <bpf/bpf_helpers.h>
#include <bpf/bpf_core_read.h>
#include "bpf_trace_helpers.h"
#define BPF_STRUCT_OPS(name, args...) \
SEC("struct_ops/"#name) \
BPF_PROG(name, args)
#define tcp_jiffies32 ((__u32)bpf_jiffies64())
struct sock_common {
unsigned char skc_state;
} __attribute__((preserve_access_index));
enum sk_pacing {
SK_PACING_NONE = 0,
SK_PACING_NEEDED = 1,
SK_PACING_FQ = 2,
};
struct sock {
struct sock_common __sk_common;
unsigned long sk_pacing_rate;
__u32 sk_pacing_status; /* see enum sk_pacing */
} __attribute__((preserve_access_index));
struct inet_sock {
......@@ -54,6 +69,7 @@ struct tcp_sock {
__u32 max_packets_out;
__u32 lsndtime;
__u32 prior_cwnd;
__u64 tcp_mstamp; /* most recent packet received/sent */
} __attribute__((preserve_access_index));
static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk)
......
......@@ -4,6 +4,7 @@
#include <linux/err.h>
#include <test_progs.h>
#include "bpf_dctcp.skel.h"
#include "bpf_cubic.skel.h"
#define min(a, b) ((a) < (b) ? (a) : (b))
......@@ -158,6 +159,28 @@ static void do_test(const char *tcp_ca)
close(fd);
}
static void test_cubic(void)
{
struct bpf_cubic *cubic_skel;
struct bpf_link *link;
cubic_skel = bpf_cubic__open_and_load();
if (CHECK(!cubic_skel, "bpf_cubic__open_and_load", "failed\n"))
return;
link = bpf_map__attach_struct_ops(cubic_skel->maps.cubic);
if (CHECK(IS_ERR(link), "bpf_map__attach_struct_ops", "err:%ld\n",
PTR_ERR(link))) {
bpf_cubic__destroy(cubic_skel);
return;
}
do_test("bpf_cubic");
bpf_link__destroy(link);
bpf_cubic__destroy(cubic_skel);
}
static void test_dctcp(void)
{
struct bpf_dctcp *dctcp_skel;
......@@ -184,4 +207,6 @@ void test_bpf_tcp_ca(void)
{
if (test__start_subtest("dctcp"))
test_dctcp();
if (test__start_subtest("cubic"))
test_cubic();
}
// SPDX-License-Identifier: GPL-2.0-only
/* WARNING: This implemenation is not necessarily the same
* as the tcp_cubic.c. The purpose is mainly for testing
* the kernel BPF logic.
*
* Highlights:
* 1. CONFIG_HZ .kconfig map is used.
* 2. In bictcp_update(), calculation is changed to use usec
* resolution (i.e. USEC_PER_JIFFY) instead of using jiffies.
* Thus, usecs_to_jiffies() is not used in the bpf_cubic.c.
* 3. In bitctcp_update() [under tcp_friendliness], the original
* "while (ca->ack_cnt > delta)" loop is changed to the equivalent
* "ca->ack_cnt / delta" operation.
*/
#include <linux/bpf.h>
#include "bpf_tcp_helpers.h"
char _license[] SEC("license") = "GPL";
#define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
#define BICTCP_BETA_SCALE 1024 /* Scale factor beta calculation
* max_cwnd = snd_cwnd * beta
*/
#define BICTCP_HZ 10 /* BIC HZ 2^10 = 1024 */
/* Two methods of hybrid slow start */
#define HYSTART_ACK_TRAIN 0x1
#define HYSTART_DELAY 0x2
/* Number of delay samples for detecting the increase of delay */
#define HYSTART_MIN_SAMPLES 8
#define HYSTART_DELAY_MIN (4000U) /* 4ms */
#define HYSTART_DELAY_MAX (16000U) /* 16 ms */
#define HYSTART_DELAY_THRESH(x) clamp(x, HYSTART_DELAY_MIN, HYSTART_DELAY_MAX)
static int fast_convergence = 1;
static const int beta = 717; /* = 717/1024 (BICTCP_BETA_SCALE) */
static int initial_ssthresh;
static const int bic_scale = 41;
static int tcp_friendliness = 1;
static int hystart = 1;
static int hystart_detect = HYSTART_ACK_TRAIN | HYSTART_DELAY;
static int hystart_low_window = 16;
static int hystart_ack_delta_us = 2000;
static const __u32 cube_rtt_scale = (bic_scale * 10); /* 1024*c/rtt */
static const __u32 beta_scale = 8*(BICTCP_BETA_SCALE+beta) / 3
/ (BICTCP_BETA_SCALE - beta);
/* calculate the "K" for (wmax-cwnd) = c/rtt * K^3
* so K = cubic_root( (wmax-cwnd)*rtt/c )
* the unit of K is bictcp_HZ=2^10, not HZ
*
* c = bic_scale >> 10
* rtt = 100ms
*
* the following code has been designed and tested for
* cwnd < 1 million packets
* RTT < 100 seconds
* HZ < 1,000,00 (corresponding to 10 nano-second)
*/
/* 1/c * 2^2*bictcp_HZ * srtt, 2^40 */
static const __u64 cube_factor = (__u64)(1ull << (10+3*BICTCP_HZ))
/ (bic_scale * 10);
/* BIC TCP Parameters */
struct bictcp {
__u32 cnt; /* increase cwnd by 1 after ACKs */
__u32 last_max_cwnd; /* last maximum snd_cwnd */
__u32 last_cwnd; /* the last snd_cwnd */
__u32 last_time; /* time when updated last_cwnd */
__u32 bic_origin_point;/* origin point of bic function */
__u32 bic_K; /* time to origin point
from the beginning of the current epoch */
__u32 delay_min; /* min delay (usec) */
__u32 epoch_start; /* beginning of an epoch */
__u32 ack_cnt; /* number of acks */
__u32 tcp_cwnd; /* estimated tcp cwnd */
__u16 unused;
__u8 sample_cnt; /* number of samples to decide curr_rtt */
__u8 found; /* the exit point is found? */
__u32 round_start; /* beginning of each round */
__u32 end_seq; /* end_seq of the round */
__u32 last_ack; /* last time when the ACK spacing is close */
__u32 curr_rtt; /* the minimum rtt of current round */
};
static inline void bictcp_reset(struct bictcp *ca)
{
ca->cnt = 0;
ca->last_max_cwnd = 0;
ca->last_cwnd = 0;
ca->last_time = 0;
ca->bic_origin_point = 0;
ca->bic_K = 0;
ca->delay_min = 0;
ca->epoch_start = 0;
ca->ack_cnt = 0;
ca->tcp_cwnd = 0;
ca->found = 0;
}
extern unsigned long CONFIG_HZ __kconfig;
#define HZ CONFIG_HZ
#define USEC_PER_MSEC 1000UL
#define USEC_PER_SEC 1000000UL
#define USEC_PER_JIFFY (USEC_PER_SEC / HZ)
static __always_inline __u64 div64_u64(__u64 dividend, __u64 divisor)
{
return dividend / divisor;
}
#define div64_ul div64_u64
#define BITS_PER_U64 (sizeof(__u64) * 8)
static __always_inline int fls64(__u64 x)
{
int num = BITS_PER_U64 - 1;
if (x == 0)
return 0;
if (!(x & (~0ull << (BITS_PER_U64-32)))) {
num -= 32;
x <<= 32;
}
if (!(x & (~0ull << (BITS_PER_U64-16)))) {
num -= 16;
x <<= 16;
}
if (!(x & (~0ull << (BITS_PER_U64-8)))) {
num -= 8;
x <<= 8;
}
if (!(x & (~0ull << (BITS_PER_U64-4)))) {
num -= 4;
x <<= 4;
}
if (!(x & (~0ull << (BITS_PER_U64-2)))) {
num -= 2;
x <<= 2;
}
if (!(x & (~0ull << (BITS_PER_U64-1))))
num -= 1;
return num + 1;
}
static __always_inline __u32 bictcp_clock_us(const struct sock *sk)
{
return tcp_sk(sk)->tcp_mstamp;
}
static __always_inline void bictcp_hystart_reset(struct sock *sk)
{
struct tcp_sock *tp = tcp_sk(sk);
struct bictcp *ca = inet_csk_ca(sk);
ca->round_start = ca->last_ack = bictcp_clock_us(sk);
ca->end_seq = tp->snd_nxt;
ca->curr_rtt = ~0U;
ca->sample_cnt = 0;
}
/* "struct_ops/" prefix is not a requirement
* It will be recognized as BPF_PROG_TYPE_STRUCT_OPS
* as long as it is used in one of the func ptr
* under SEC(".struct_ops").
*/
SEC("struct_ops/bictcp_init")
void BPF_PROG(bictcp_init, struct sock *sk)
{
struct bictcp *ca = inet_csk_ca(sk);
bictcp_reset(ca);
if (hystart)
bictcp_hystart_reset(sk);
if (!hystart && initial_ssthresh)
tcp_sk(sk)->snd_ssthresh = initial_ssthresh;
}
/* No prefix in SEC will also work.
* The remaining tcp-cubic functions have an easier way.
*/
SEC("no-sec-prefix-bictcp_cwnd_event")
void BPF_PROG(bictcp_cwnd_event, struct sock *sk, enum tcp_ca_event event)
{
if (event == CA_EVENT_TX_START) {
struct bictcp *ca = inet_csk_ca(sk);
__u32 now = tcp_jiffies32;
__s32 delta;
delta = now - tcp_sk(sk)->lsndtime;
/* We were application limited (idle) for a while.
* Shift epoch_start to keep cwnd growth to cubic curve.
*/
if (ca->epoch_start && delta > 0) {
ca->epoch_start += delta;
if (after(ca->epoch_start, now))
ca->epoch_start = now;
}
return;
}
}
/*
* cbrt(x) MSB values for x MSB values in [0..63].
* Precomputed then refined by hand - Willy Tarreau
*
* For x in [0..63],
* v = cbrt(x << 18) - 1
* cbrt(x) = (v[x] + 10) >> 6
*/
static const __u8 v[] = {
/* 0x00 */ 0, 54, 54, 54, 118, 118, 118, 118,
/* 0x08 */ 123, 129, 134, 138, 143, 147, 151, 156,
/* 0x10 */ 157, 161, 164, 168, 170, 173, 176, 179,
/* 0x18 */ 181, 185, 187, 190, 192, 194, 197, 199,
/* 0x20 */ 200, 202, 204, 206, 209, 211, 213, 215,
/* 0x28 */ 217, 219, 221, 222, 224, 225, 227, 229,
/* 0x30 */ 231, 232, 234, 236, 237, 239, 240, 242,
/* 0x38 */ 244, 245, 246, 248, 250, 251, 252, 254,
};
/* calculate the cubic root of x using a table lookup followed by one
* Newton-Raphson iteration.
* Avg err ~= 0.195%
*/
static __always_inline __u32 cubic_root(__u64 a)
{
__u32 x, b, shift;
if (a < 64) {
/* a in [0..63] */
return ((__u32)v[(__u32)a] + 35) >> 6;
}
b = fls64(a);
b = ((b * 84) >> 8) - 1;
shift = (a >> (b * 3));
/* it is needed for verifier's bound check on v */
if (shift >= 64)
return 0;
x = ((__u32)(((__u32)v[shift] + 10) << b)) >> 6;
/*
* Newton-Raphson iteration
* 2
* x = ( 2 * x + a / x ) / 3
* k+1 k k
*/
x = (2 * x + (__u32)div64_u64(a, (__u64)x * (__u64)(x - 1)));
x = ((x * 341) >> 10);
return x;
}
/*
* Compute congestion window to use.
*/
static __always_inline void bictcp_update(struct bictcp *ca, __u32 cwnd,
__u32 acked)
{
__u32 delta, bic_target, max_cnt;
__u64 offs, t;
ca->ack_cnt += acked; /* count the number of ACKed packets */
if (ca->last_cwnd == cwnd &&
(__s32)(tcp_jiffies32 - ca->last_time) <= HZ / 32)
return;
/* The CUBIC function can update ca->cnt at most once per jiffy.
* On all cwnd reduction events, ca->epoch_start is set to 0,
* which will force a recalculation of ca->cnt.
*/
if (ca->epoch_start && tcp_jiffies32 == ca->last_time)
goto tcp_friendliness;
ca->last_cwnd = cwnd;
ca->last_time = tcp_jiffies32;
if (ca->epoch_start == 0) {
ca->epoch_start = tcp_jiffies32; /* record beginning */
ca->ack_cnt = acked; /* start counting */
ca->tcp_cwnd = cwnd; /* syn with cubic */
if (ca->last_max_cwnd <= cwnd) {
ca->bic_K = 0;
ca->bic_origin_point = cwnd;
} else {
/* Compute new K based on
* (wmax-cwnd) * (srtt>>3 / HZ) / c * 2^(3*bictcp_HZ)
*/
ca->bic_K = cubic_root(cube_factor
* (ca->last_max_cwnd - cwnd));
ca->bic_origin_point = ca->last_max_cwnd;
}
}
/* cubic function - calc*/
/* calculate c * time^3 / rtt,
* while considering overflow in calculation of time^3
* (so time^3 is done by using 64 bit)
* and without the support of division of 64bit numbers
* (so all divisions are done by using 32 bit)
* also NOTE the unit of those veriables
* time = (t - K) / 2^bictcp_HZ
* c = bic_scale >> 10
* rtt = (srtt >> 3) / HZ
* !!! The following code does not have overflow problems,
* if the cwnd < 1 million packets !!!
*/
t = (__s32)(tcp_jiffies32 - ca->epoch_start) * USEC_PER_JIFFY;
t += ca->delay_min;
/* change the unit from usec to bictcp_HZ */
t <<= BICTCP_HZ;
t /= USEC_PER_SEC;
if (t < ca->bic_K) /* t - K */
offs = ca->bic_K - t;
else
offs = t - ca->bic_K;
/* c/rtt * (t-K)^3 */
delta = (cube_rtt_scale * offs * offs * offs) >> (10+3*BICTCP_HZ);
if (t < ca->bic_K) /* below origin*/
bic_target = ca->bic_origin_point - delta;
else /* above origin*/
bic_target = ca->bic_origin_point + delta;
/* cubic function - calc bictcp_cnt*/
if (bic_target > cwnd) {
ca->cnt = cwnd / (bic_target - cwnd);
} else {
ca->cnt = 100 * cwnd; /* very small increment*/
}
/*
* The initial growth of cubic function may be too conservative
* when the available bandwidth is still unknown.
*/
if (ca->last_max_cwnd == 0 && ca->cnt > 20)
ca->cnt = 20; /* increase cwnd 5% per RTT */
tcp_friendliness:
/* TCP Friendly */
if (tcp_friendliness) {
__u32 scale = beta_scale;
__u32 n;
/* update tcp cwnd */
delta = (cwnd * scale) >> 3;
if (ca->ack_cnt > delta && delta) {
n = ca->ack_cnt / delta;
ca->ack_cnt -= n * delta;
ca->tcp_cwnd += n;
}
if (ca->tcp_cwnd > cwnd) { /* if bic is slower than tcp */
delta = ca->tcp_cwnd - cwnd;
max_cnt = cwnd / delta;
if (ca->cnt > max_cnt)
ca->cnt = max_cnt;
}
}
/* The maximum rate of cwnd increase CUBIC allows is 1 packet per
* 2 packets ACKed, meaning cwnd grows at 1.5x per RTT.
*/
ca->cnt = max(ca->cnt, 2U);
}
/* Or simply use the BPF_STRUCT_OPS to avoid the SEC boiler plate. */
void BPF_STRUCT_OPS(bictcp_cong_avoid, struct sock *sk, __u32 ack, __u32 acked)
{
struct tcp_sock *tp = tcp_sk(sk);
struct bictcp *ca = inet_csk_ca(sk);
if (!tcp_is_cwnd_limited(sk))
return;
if (tcp_in_slow_start(tp)) {
if (hystart && after(ack, ca->end_seq))
bictcp_hystart_reset(sk);
acked = tcp_slow_start(tp, acked);
if (!acked)
return;
}
bictcp_update(ca, tp->snd_cwnd, acked);
tcp_cong_avoid_ai(tp, ca->cnt, acked);
}
__u32 BPF_STRUCT_OPS(bictcp_recalc_ssthresh, struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
struct bictcp *ca = inet_csk_ca(sk);
ca->epoch_start = 0; /* end of epoch */
/* Wmax and fast convergence */
if (tp->snd_cwnd < ca->last_max_cwnd && fast_convergence)
ca->last_max_cwnd = (tp->snd_cwnd * (BICTCP_BETA_SCALE + beta))
/ (2 * BICTCP_BETA_SCALE);
else
ca->last_max_cwnd = tp->snd_cwnd;
return max((tp->snd_cwnd * beta) / BICTCP_BETA_SCALE, 2U);
}
void BPF_STRUCT_OPS(bictcp_state, struct sock *sk, __u8 new_state)
{
if (new_state == TCP_CA_Loss) {
bictcp_reset(inet_csk_ca(sk));
bictcp_hystart_reset(sk);
}
}
#define GSO_MAX_SIZE 65536
/* Account for TSO/GRO delays.
* Otherwise short RTT flows could get too small ssthresh, since during
* slow start we begin with small TSO packets and ca->delay_min would
* not account for long aggregation delay when TSO packets get bigger.
* Ideally even with a very small RTT we would like to have at least one
* TSO packet being sent and received by GRO, and another one in qdisc layer.
* We apply another 100% factor because @rate is doubled at this point.
* We cap the cushion to 1ms.
*/
static __always_inline __u32 hystart_ack_delay(struct sock *sk)
{
unsigned long rate;
rate = sk->sk_pacing_rate;
if (!rate)
return 0;
return min((__u64)USEC_PER_MSEC,
div64_ul((__u64)GSO_MAX_SIZE * 4 * USEC_PER_SEC, rate));
}
static __always_inline void hystart_update(struct sock *sk, __u32 delay)
{
struct tcp_sock *tp = tcp_sk(sk);
struct bictcp *ca = inet_csk_ca(sk);
__u32 threshold;
if (hystart_detect & HYSTART_ACK_TRAIN) {
__u32 now = bictcp_clock_us(sk);
/* first detection parameter - ack-train detection */
if ((__s32)(now - ca->last_ack) <= hystart_ack_delta_us) {
ca->last_ack = now;
threshold = ca->delay_min + hystart_ack_delay(sk);
/* Hystart ack train triggers if we get ack past
* ca->delay_min/2.
* Pacing might have delayed packets up to RTT/2
* during slow start.
*/
if (sk->sk_pacing_status == SK_PACING_NONE)
threshold >>= 1;
if ((__s32)(now - ca->round_start) > threshold) {
ca->found = 1;
tp->snd_ssthresh = tp->snd_cwnd;
}
}
}
if (hystart_detect & HYSTART_DELAY) {
/* obtain the minimum delay of more than sampling packets */
if (ca->sample_cnt < HYSTART_MIN_SAMPLES) {
if (ca->curr_rtt > delay)
ca->curr_rtt = delay;
ca->sample_cnt++;
} else {
if (ca->curr_rtt > ca->delay_min +
HYSTART_DELAY_THRESH(ca->delay_min >> 3)) {
ca->found = 1;
tp->snd_ssthresh = tp->snd_cwnd;
}
}
}
}
void BPF_STRUCT_OPS(bictcp_acked, struct sock *sk,
const struct ack_sample *sample)
{
const struct tcp_sock *tp = tcp_sk(sk);
struct bictcp *ca = inet_csk_ca(sk);
__u32 delay;
/* Some calls are for duplicates without timetamps */
if (sample->rtt_us < 0)
return;
/* Discard delay samples right after fast recovery */
if (ca->epoch_start && (__s32)(tcp_jiffies32 - ca->epoch_start) < HZ)
return;
delay = sample->rtt_us;
if (delay == 0)
delay = 1;
/* first time call or link delay decreases */
if (ca->delay_min == 0 || ca->delay_min > delay)
ca->delay_min = delay;
/* hystart triggers when cwnd is larger than some threshold */
if (!ca->found && tcp_in_slow_start(tp) && hystart &&
tp->snd_cwnd >= hystart_low_window)
hystart_update(sk, delay);
}
__u32 BPF_STRUCT_OPS(tcp_reno_undo_cwnd, struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
return max(tp->snd_cwnd, tp->prior_cwnd);
}
SEC(".struct_ops")
struct tcp_congestion_ops cubic = {
.init = (void *)bictcp_init,
.ssthresh = (void *)bictcp_recalc_ssthresh,
.cong_avoid = (void *)bictcp_cong_avoid,
.set_state = (void *)bictcp_state,
.undo_cwnd = (void *)tcp_reno_undo_cwnd,
.cwnd_event = (void *)bictcp_cwnd_event,
.pkts_acked = (void *)bictcp_acked,
.name = "bpf_cubic",
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment