Skip to content

L
linux
Commit 85e4db53 authored by Mike Rapoport's avatar Mike Rapoport Committed by Greg Kroah-Hartman
Browse files
Options

staging: sm750fb: share common bits in display control registers 

The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.
Signed-off-by: default avatarMike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7755265a
Show whitespace changes
Inline Side-by-side
Showing with 58 additions and 87 deletions
drivers/staging/sm750fb/ddk750_chip.c
View file @ 85e4db53
......@@ -249,17 +249,17 @@ int ddk750_initHw(initchip_param_t *pInitParam)
/* Disable Overlay, if a former application left it on */
reg = PEEK32(VIDEO_DISPLAY_CTRL);
reg = FIELD_SET(reg, VIDEO_DISPLAY_CTRL, PLANE, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
POKE32(VIDEO_DISPLAY_CTRL, reg);
/* Disable video alpha, if a former application left it on */
reg = PEEK32(VIDEO_ALPHA_DISPLAY_CTRL);
reg = FIELD_SET(reg, VIDEO_ALPHA_DISPLAY_CTRL, PLANE, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
POKE32(VIDEO_ALPHA_DISPLAY_CTRL, reg);
/* Disable alpha plane, if a former application left it on */
reg = PEEK32(ALPHA_DISPLAY_CTRL);
reg = FIELD_SET(reg, ALPHA_DISPLAY_CTRL, PLANE, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
POKE32(ALPHA_DISPLAY_CTRL, reg);
/* Disable DMA Channel, if a former application left it on */
......
drivers/staging/sm750fb/ddk750_display.c
View file @ 85e4db53
......@@ -23,12 +23,10 @@ static void setDisplayControl(int ctrl, int disp_state)
* because changing at the same time does not guarantee that
* the plane will also enabled or disabled.
*/
reg = FIELD_SET(reg,
PANEL_DISPLAY_CTRL, TIMING, ENABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE);
POKE32(PANEL_DISPLAY_CTRL, reg);
reg = FIELD_SET(reg,
PANEL_DISPLAY_CTRL, PLANE, ENABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE);
/* Added some masks to mask out the reserved bits.
* Sometimes, the reserved bits are set/reset randomly when
......@@ -57,12 +55,10 @@ static void setDisplayControl(int ctrl, int disp_state)
* next vertical sync. Need to find out if it is necessary to
* wait for 1 vsync before modifying the timing enable bit.
* */
reg = FIELD_SET(reg,
PANEL_DISPLAY_CTRL, PLANE, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
POKE32(PANEL_DISPLAY_CTRL, reg);
reg = FIELD_SET(reg,
PANEL_DISPLAY_CTRL, TIMING, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE);
POKE32(PANEL_DISPLAY_CTRL, reg);
}
......@@ -74,12 +70,10 @@ static void setDisplayControl(int ctrl, int disp_state)
/* Timing should be enabled first before enabling the plane because changing at the
same time does not guarantee that the plane will also enabled or disabled.
*/
reg = FIELD_SET(reg,
CRT_DISPLAY_CTRL, TIMING, ENABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, ENABLE);
POKE32(CRT_DISPLAY_CTRL, reg);
reg = FIELD_SET(reg,
CRT_DISPLAY_CTRL, PLANE, ENABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, ENABLE);
/* Added some masks to mask out the reserved bits.
* Sometimes, the reserved bits are set/reset randomly when
......@@ -106,12 +100,10 @@ static void setDisplayControl(int ctrl, int disp_state)
* vertical sync. Need to find out if it is necessary to
* wait for 1 vsync before modifying the timing enable bit.
*/
reg = FIELD_SET(reg,
CRT_DISPLAY_CTRL, PLANE, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, PLANE, DISABLE);
POKE32(CRT_DISPLAY_CTRL, reg);
reg = FIELD_SET(reg,
CRT_DISPLAY_CTRL, TIMING, DISABLE);
reg = FIELD_SET(reg, DISPLAY_CTRL, TIMING, DISABLE);
POKE32(CRT_DISPLAY_CTRL, reg);
}
}
......@@ -127,8 +119,9 @@ static void waitNextVerticalSync(int ctrl, int delay)
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
if (!(PEEK32(PANEL_PLL_CTRL) & PLL_CTRL_POWER) ||
(FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, TIMING) ==
PANEL_DISPLAY_CTRL_TIMING_DISABLE)) {
(FIELD_GET(PEEK32(PANEL_DISPLAY_CTRL),
DISPLAY_CTRL, TIMING) ==
DISPLAY_CTRL_TIMING_DISABLE)) {
return;
}
......@@ -149,8 +142,9 @@ static void waitNextVerticalSync(int ctrl, int delay)
/* Do not wait when the Primary PLL is off or display control is already off.
This will prevent the software to wait forever. */
if (!(PEEK32(CRT_PLL_CTRL) & PLL_CTRL_POWER) ||
(FIELD_GET(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, TIMING) ==
CRT_DISPLAY_CTRL_TIMING_DISABLE)) {
(FIELD_GET(PEEK32(CRT_DISPLAY_CTRL),
DISPLAY_CTRL, TIMING) ==
DISPLAY_CTRL_TIMING_DISABLE)) {
return;
}
......
drivers/staging/sm750fb/ddk750_mode.c
View file @ 85e4db53
......@@ -65,7 +65,8 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, RGBBIT, 24BIT);
/* Set bit 14 of display controller */
dispControl = FIELD_SET(dispControl, CRT_DISPLAY_CTRL, CLOCK_PHASE, ACTIVE_LOW);
dispControl = FIELD_SET(dispControl, DISPLAY_CTRL, CLOCK_PHASE,
ACTIVE_LOW);
POKE32(CRT_DISPLAY_CTRL, dispControl);
......@@ -101,21 +102,22 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
| FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
tmp = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE,
tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE,
pModeParam->vertical_sync_polarity) |
FIELD_VALUE(0, CRT_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) |
FIELD_SET(0, CRT_DISPLAY_CTRL, TIMING, ENABLE) |
FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE,
pModeParam->horizontal_sync_polarity) |
FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) |
FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE);
if (getChipType() == SM750LE) {
displayControlAdjust_SM750LE(pModeParam, tmp);
} else {
reg = PEEK32(CRT_DISPLAY_CTRL)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING)
& FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE);
& FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE)
& FIELD_CLEAR(DISPLAY_CTRL, TIMING)
& FIELD_CLEAR(DISPLAY_CTRL, PLANE);
POKE32(CRT_DISPLAY_CTRL, tmp | reg);
}
......@@ -141,12 +143,14 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
| FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
tmp = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE,
tmp = FIELD_VALUE(0, DISPLAY_CTRL, VSYNC_PHASE,
pModeParam->vertical_sync_polarity) |
FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity) |
FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity) |
FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE) |
FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
FIELD_VALUE(0, DISPLAY_CTRL, HSYNC_PHASE,
pModeParam->horizontal_sync_polarity) |
FIELD_VALUE(0, DISPLAY_CTRL, CLOCK_PHASE,
pModeParam->clock_phase_polarity) |
FIELD_SET(0, DISPLAY_CTRL, TIMING, ENABLE) |
FIELD_SET(0, DISPLAY_CTRL, PLANE, ENABLE);
reserved = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK,
ENABLE) |
......@@ -155,11 +159,11 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll)
FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
reg = (PEEK32(PANEL_DISPLAY_CTRL) & ~reserved)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, HSYNC_PHASE)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, TIMING)
& FIELD_CLEAR(PANEL_DISPLAY_CTRL, PLANE);
& FIELD_CLEAR(DISPLAY_CTRL, CLOCK_PHASE)
& FIELD_CLEAR(DISPLAY_CTRL, VSYNC_PHASE)
& FIELD_CLEAR(DISPLAY_CTRL, HSYNC_PHASE)
& FIELD_CLEAR(DISPLAY_CTRL, TIMING)
& FIELD_CLEAR(DISPLAY_CTRL, PLANE);
/* May a hardware bug or just my test chip (not confirmed).
......
drivers/staging/sm750fb/ddk750_reg.h
View file @ 85e4db53
......@@ -825,15 +825,15 @@
#define PANEL_DISPLAY_CTRL_RESERVED_3_MASK 15:15
#define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_DISABLE 0
#define PANEL_DISPLAY_CTRL_RESERVED_3_MASK_ENABLE 1
#define PANEL_DISPLAY_CTRL_CLOCK_PHASE 14:14
#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0
#define PANEL_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1
#define PANEL_DISPLAY_CTRL_VSYNC_PHASE 13:13
#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0
#define PANEL_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1
#define PANEL_DISPLAY_CTRL_HSYNC_PHASE 12:12
#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0
#define PANEL_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1
#define DISPLAY_CTRL_CLOCK_PHASE 14:14
#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0
#define DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1
#define DISPLAY_CTRL_VSYNC_PHASE 13:13
#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0
#define DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1
#define DISPLAY_CTRL_HSYNC_PHASE 12:12
#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0
#define DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1
#define PANEL_DISPLAY_CTRL_VSYNC 11:11
#define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_HIGH 0
#define PANEL_DISPLAY_CTRL_VSYNC_ACTIVE_LOW 1
......@@ -843,9 +843,9 @@
#define PANEL_DISPLAY_CTRL_COLOR_KEY 9:9
#define PANEL_DISPLAY_CTRL_COLOR_KEY_DISABLE 0
#define PANEL_DISPLAY_CTRL_COLOR_KEY_ENABLE 1
#define PANEL_DISPLAY_CTRL_TIMING 8:8
#define PANEL_DISPLAY_CTRL_TIMING_DISABLE 0
#define PANEL_DISPLAY_CTRL_TIMING_ENABLE 1
#define DISPLAY_CTRL_TIMING 8:8
#define DISPLAY_CTRL_TIMING_DISABLE 0
#define DISPLAY_CTRL_TIMING_ENABLE 1
#define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR 7:7
#define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_DOWN 0
#define PANEL_DISPLAY_CTRL_VERTICAL_PAN_DIR_UP 1
......@@ -858,12 +858,12 @@
#define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN 4:4
#define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_DISABLE 0
#define PANEL_DISPLAY_CTRL_HORIZONTAL_PAN_ENABLE 1
#define PANEL_DISPLAY_CTRL_GAMMA 3:3
#define PANEL_DISPLAY_CTRL_GAMMA_DISABLE 0
#define PANEL_DISPLAY_CTRL_GAMMA_ENABLE 1
#define PANEL_DISPLAY_CTRL_PLANE 2:2
#define PANEL_DISPLAY_CTRL_PLANE_DISABLE 0
#define PANEL_DISPLAY_CTRL_PLANE_ENABLE 1
#define DISPLAY_CTRL_GAMMA 3:3
#define DISPLAY_CTRL_GAMMA_DISABLE 0
#define DISPLAY_CTRL_GAMMA_ENABLE 1
#define DISPLAY_CTRL_PLANE 2:2
#define DISPLAY_CTRL_PLANE_DISABLE 0
#define DISPLAY_CTRL_PLANE_ENABLE 1
#define PANEL_DISPLAY_CTRL_FORMAT 1:0
#define PANEL_DISPLAY_CTRL_FORMAT_8 0
#define PANEL_DISPLAY_CTRL_FORMAT_16 1
......@@ -966,9 +966,6 @@
#define VIDEO_DISPLAY_CTRL_GAMMA 3:3
#define VIDEO_DISPLAY_CTRL_GAMMA_DISABLE 0
#define VIDEO_DISPLAY_CTRL_GAMMA_ENABLE 1
#define VIDEO_DISPLAY_CTRL_PLANE 2:2
#define VIDEO_DISPLAY_CTRL_PLANE_DISABLE 0
#define VIDEO_DISPLAY_CTRL_PLANE_ENABLE 1
#define VIDEO_DISPLAY_CTRL_FORMAT 1:0
#define VIDEO_DISPLAY_CTRL_FORMAT_8 0
#define VIDEO_DISPLAY_CTRL_FORMAT_16 1
......@@ -1065,9 +1062,6 @@
#define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY 3:3
#define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE 0
#define VIDEO_ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE 1
#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE 2:2
#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_DISABLE 0
#define VIDEO_ALPHA_DISPLAY_CTRL_PLANE_ENABLE 1
#define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT 1:0
#define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_8 0
#define VIDEO_ALPHA_DISPLAY_CTRL_FORMAT_16 1
......@@ -1258,9 +1252,6 @@
#define ALPHA_DISPLAY_CTRL_CHROMA_KEY 3:3
#define ALPHA_DISPLAY_CTRL_CHROMA_KEY_DISABLE 0
#define ALPHA_DISPLAY_CTRL_CHROMA_KEY_ENABLE 1
#define ALPHA_DISPLAY_CTRL_PLANE 2:2
#define ALPHA_DISPLAY_CTRL_PLANE_DISABLE 0
#define ALPHA_DISPLAY_CTRL_PLANE_ENABLE 1
#define ALPHA_DISPLAY_CTRL_FORMAT 1:0
#define ALPHA_DISPLAY_CTRL_FORMAT_16 1
#define ALPHA_DISPLAY_CTRL_FORMAT_ALPHA_4_4 2
......@@ -1448,28 +1439,10 @@
#define CRT_DISPLAY_CTRL_FIFO_3 1
#define CRT_DISPLAY_CTRL_FIFO_7 2
#define CRT_DISPLAY_CTRL_FIFO_11 3
#define CRT_DISPLAY_CTRL_CLOCK_PHASE 14:14
#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_HIGH 0
#define CRT_DISPLAY_CTRL_CLOCK_PHASE_ACTIVE_LOW 1
#define CRT_DISPLAY_CTRL_VSYNC_PHASE 13:13
#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_HIGH 0
#define CRT_DISPLAY_CTRL_VSYNC_PHASE_ACTIVE_LOW 1
#define CRT_DISPLAY_CTRL_HSYNC_PHASE 12:12
#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_HIGH 0
#define CRT_DISPLAY_CTRL_HSYNC_PHASE_ACTIVE_LOW 1
#define CRT_DISPLAY_CTRL_BLANK 10:10
#define CRT_DISPLAY_CTRL_BLANK_OFF 0
#define CRT_DISPLAY_CTRL_BLANK_ON 1
#define CRT_DISPLAY_CTRL_TIMING 8:8
#define CRT_DISPLAY_CTRL_TIMING_DISABLE 0
#define CRT_DISPLAY_CTRL_TIMING_ENABLE 1
#define CRT_DISPLAY_CTRL_PIXEL 7:4
#define CRT_DISPLAY_CTRL_GAMMA 3:3
#define CRT_DISPLAY_CTRL_GAMMA_DISABLE 0
#define CRT_DISPLAY_CTRL_GAMMA_ENABLE 1
#define CRT_DISPLAY_CTRL_PLANE 2:2
#define CRT_DISPLAY_CTRL_PLANE_DISABLE 0
#define CRT_DISPLAY_CTRL_PLANE_ENABLE 1
#define CRT_DISPLAY_CTRL_FORMAT 1:0
#define CRT_DISPLAY_CTRL_FORMAT_8 0
#define CRT_DISPLAY_CTRL_FORMAT_16 1
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7