Commit 85e510a1 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

[media] tc358743: use - instead of non-ascii wide-dash character

smatch complains about non-ascii characters. It turns out that a wide-dash character
was used instead of the more common '-' character.

Replace those dashes with -.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 3915d367
......@@ -1198,21 +1198,21 @@ static int tc358743_log_status(struct v4l2_subdev *sd)
#ifdef CONFIG_VIDEO_ADV_DEBUG
static void tc358743_print_register_map(struct v4l2_subdev *sd)
{
v4l2_info(sd, "0x00000x00FF: Global Control Register\n");
v4l2_info(sd, "0x01000x01FF: CSI2-TX PHY Register\n");
v4l2_info(sd, "0x02000x03FF: CSI2-TX PPI Register\n");
v4l2_info(sd, "0x04000x05FF: Reserved\n");
v4l2_info(sd, "0x06000x06FF: CEC Register\n");
v4l2_info(sd, "0x07000x84FF: Reserved\n");
v4l2_info(sd, "0x85000x85FF: HDMIRX System Control Register\n");
v4l2_info(sd, "0x86000x86FF: HDMIRX Audio Control Register\n");
v4l2_info(sd, "0x87000x87FF: HDMIRX InfoFrame packet data Register\n");
v4l2_info(sd, "0x88000x88FF: HDMIRX HDCP Port Register\n");
v4l2_info(sd, "0x89000x89FF: HDMIRX Video Output Port & 3D Register\n");
v4l2_info(sd, "0x8A000x8BFF: Reserved\n");
v4l2_info(sd, "0x8C000x8FFF: HDMIRX EDID-RAM (1024bytes)\n");
v4l2_info(sd, "0x90000x90FF: HDMIRX GBD Extraction Control\n");
v4l2_info(sd, "0x91000x92FF: HDMIRX GBD RAM read\n");
v4l2_info(sd, "0x0000-0x00FF: Global Control Register\n");
v4l2_info(sd, "0x0100-0x01FF: CSI2-TX PHY Register\n");
v4l2_info(sd, "0x0200-0x03FF: CSI2-TX PPI Register\n");
v4l2_info(sd, "0x0400-0x05FF: Reserved\n");
v4l2_info(sd, "0x0600-0x06FF: CEC Register\n");
v4l2_info(sd, "0x0700-0x84FF: Reserved\n");
v4l2_info(sd, "0x8500-0x85FF: HDMIRX System Control Register\n");
v4l2_info(sd, "0x8600-0x86FF: HDMIRX Audio Control Register\n");
v4l2_info(sd, "0x8700-0x87FF: HDMIRX InfoFrame packet data Register\n");
v4l2_info(sd, "0x8800-0x88FF: HDMIRX HDCP Port Register\n");
v4l2_info(sd, "0x8900-0x89FF: HDMIRX Video Output Port & 3D Register\n");
v4l2_info(sd, "0x8A00-0x8BFF: Reserved\n");
v4l2_info(sd, "0x8C00-0x8FFF: HDMIRX EDID-RAM (1024bytes)\n");
v4l2_info(sd, "0x9000-0x90FF: HDMIRX GBD Extraction Control\n");
v4l2_info(sd, "0x9100-0x92FF: HDMIRX GBD RAM read\n");
v4l2_info(sd, "0x9300- : Reserved\n");
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment