Commit 8676ce07 authored by Jeff Garzik's avatar Jeff Garzik

[libata] Bump versions

Update major version for libata, and several drivers.
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent eb99adde
......@@ -48,7 +48,7 @@
#include <asm/io.h>
#define DRV_NAME "ahci"
#define DRV_VERSION "1.3"
#define DRV_VERSION "2.0"
enum {
......
......@@ -93,7 +93,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
#define DRV_VERSION "1.10"
#define DRV_VERSION "2.00"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
......
......@@ -29,7 +29,7 @@
#define __LIBATA_H__
#define DRV_NAME "libata"
#define DRV_VERSION "1.30" /* must be exactly four chars */
#define DRV_VERSION "2.00" /* must be exactly four chars */
struct ata_scsi_args {
struct ata_device *dev;
......
......@@ -44,7 +44,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
#define DRV_VERSION "0.9"
#define DRV_VERSION "2.0"
enum {
NV_PORTS = 2,
......
......@@ -46,7 +46,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
#define DRV_VERSION "1.0"
#define DRV_VERSION "2.0"
enum {
/*
......
......@@ -31,7 +31,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_sil24"
#define DRV_VERSION "0.24"
#define DRV_VERSION "0.3"
/*
* Port request block (PRB) 32 bytes
......
......@@ -54,7 +54,7 @@
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
#define DRV_VERSION "1.8"
#define DRV_VERSION "2.0"
enum {
/* Taskfile registers offsets */
......
......@@ -37,7 +37,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
#define DRV_VERSION "0.6"
#define DRV_VERSION "1.0"
enum {
uli_5289 = 0,
......
......@@ -47,7 +47,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_via"
#define DRV_VERSION "1.2"
#define DRV_VERSION "2.0"
enum board_ids_enum {
vt6420,
......
......@@ -47,7 +47,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
#define DRV_VERSION "1.2"
#define DRV_VERSION "2.0"
enum {
/* Interrupt register offsets (from chip base address) */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment