net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset

According to the Datasheet this bit should be 0 (Normal operation) in
default. With the FORCE_LINK_GOOD bit set, it is not possible to get a
link. This patch sets FORCE_LINK_GOOD to the default value after
resetting the phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/dp83867.c

@@ -97,6 +97,7 @@
 #define DP83867_PHYCR_FIFO_DEPTH_MAX		0x03
 #define DP83867_PHYCR_FIFO_DEPTH_MASK		GENMASK(15, 14)
 #define DP83867_PHYCR_RESERVED_MASK		BIT(11)
+#define DP83867_PHYCR_FORCE_LINK_GOOD		BIT(10)
 
 /* RGMIIDCTL bits */
 #define DP83867_RGMII_TX_CLK_DELAY_MAX		0xf
@@ -599,7 +600,12 @@ static int dp83867_phy_reset(struct phy_device *phydev)
 
 	usleep_range(10, 20);
 
-	return 0;
+	/* After reset FORCE_LINK_GOOD bit is set. Although the
+	 * default value should be unset. Disable FORCE_LINK_GOOD
+	 * for the phy to work properly.
+	 */
+	return phy_modify(phydev, MII_DP83867_PHYCTRL,
+			 DP83867_PHYCR_FORCE_LINK_GOOD, 0);
 }
 
 static struct phy_driver dp83867_driver[] = {