Commit 876e2333 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Jason Cooper

ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes

This patch adds mv643xx_eth and mvmdio device tree nodes for DT enabled
Kirkwood boards. Phy nodes are also added with reg property set on a
per-board basis.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 4c3f6b86
......@@ -89,3 +89,19 @@ gpio_poweroff {
gpios = <&gpio0 17 0>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -87,3 +87,19 @@ pcie@1,0 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -219,3 +219,19 @@ sata1_power: regulator@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -90,3 +90,20 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1116";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -99,3 +99,31 @@ wifi-ap {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
......@@ -170,3 +170,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -96,3 +96,33 @@ wmode-g {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
......@@ -122,3 +122,19 @@ gpio_poweroff {
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -176,3 +176,19 @@ button@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -194,3 +194,27 @@ OTB {
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
......@@ -50,3 +50,19 @@ i2c@0 {
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -207,3 +207,31 @@ hdd_power: regulator@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
......@@ -191,3 +191,30 @@ misc {
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
ethphy1: ethernet-phy@2 {
device_type = "ethernet-phy";
reg = <2>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
......@@ -184,3 +184,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -84,3 +84,19 @@ gpio_poweroff {
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <0>; };
......@@ -49,3 +49,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
......@@ -50,3 +50,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <0>; };
......@@ -166,3 +166,19 @@ button@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -91,3 +91,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -203,3 +203,19 @@ sata0_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -51,3 +51,5 @@ button@2 {
};
};
};
&ethphy0 { reg = <8>; };
......@@ -59,3 +59,5 @@ button@2 {
};
};
};
&ethphy0 { reg = <0>; };
......@@ -96,3 +96,19 @@ pcie@1,0 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
......@@ -192,5 +192,57 @@ crypto@30000 {
clocks = <&gate_clk 17>;
status = "okay";
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <46>;
clocks = <&gate_clk 0>;
status = "disabled";
/* add phy nodes in board file */
};
eth0: ethernet-controller@72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 0>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet0-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
eth1: ethernet-controller@76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76000 0x4000>;
clocks = <&gate_clk 19>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet1-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment