Commit 876e7fb9 authored by Magnus Damm's avatar Magnus Damm Committed by Simon Horman

ARM: shmobile: r8a7794: alt: Enable VGA port

Enable the DU device and the VGA port available on the r8a7794
ALT board. The VGA portion of the ALT board is somewhat similar
to the Lager board but in case of ALT the DU1 pins are used
and the X2 clock has a reduced frequency.

This patch does not include any pinctrl (PFC) settings due to lack
of PFC DT integration on r8a7794. At this point the default state
of the boot loader is enough to keep the VGA port working without
changing any pinctrl settings.
Signed-off-by: default avatarMagnus Damm <damm+renesas@opensource.se>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 46c4f13d
...@@ -33,6 +33,67 @@ lbsc { ...@@ -33,6 +33,67 @@ lbsc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
}; };
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb1>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
x2_clk: x2-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x13_clk: x13-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <148500000>;
};
};
&du {
status = "okay";
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
<&mstp7_clks R8A7794_CLK_DU0>,
<&x13_clk>, <&x2_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@1 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
}; };
&extal_clk { &extal_clk {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment