Commit 887d2ec5 authored by Guenter Roeck's avatar Guenter Roeck Committed by Wim Van Sebroeck

watchdog: sp5100_tco: Add support for recent FCH versions

Starting with Family 16h Models 30h-3Fh and Family 15h Models 60h-6Fh,
watchdog address space decoding has changed. The cutover point is already
identified in the i2c-piix2 driver, so use the same mechanism.

Cc: Zoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent f7781b06
......@@ -16,6 +16,11 @@
* See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide",
* AMD Publication 45482 "AMD SB800-Series Southbridges Register
* Reference Guide"
* AMD Publication 48751 "BIOS and Kernel Developer’s Guide (BKDG)
* for AMD Family 16h Models 00h-0Fh Processors"
* AMD Publication 51192 "AMD Bolton FCH Register Reference Guide"
* AMD Publication 52740 "BIOS and Kernel Developer’s Guide (BKDG)
* for AMD Family 16h Models 30h-3Fh Processors"
*/
/*
......@@ -40,9 +45,14 @@
/* internal variables */
enum tco_reg_layout {
sp5100, sb800, efch
};
struct sp5100_tco {
struct watchdog_device wdd;
void __iomem *tcobase;
enum tco_reg_layout tco_reg_layout;
};
/* the watchdog platform device */
......@@ -67,10 +77,20 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
* Some TCO specific functions
*/
static bool tco_has_sp5100_reg_layout(struct pci_dev *dev)
static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
{
return dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision < 0x40;
if (dev->vendor == PCI_VENDOR_ID_ATI &&
dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
dev->revision < 0x40) {
return sp5100;
} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
dev->revision >= 0x41) ||
(dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
dev->revision >= 0x49))) {
return efch;
}
return sb800;
}
static int tco_timer_start(struct watchdog_device *wdd)
......@@ -139,9 +159,12 @@ static void sp5100_tco_update_pm_reg8(u8 index, u8 reset, u8 set)
outb(val, SP5100_IO_PM_DATA_REG);
}
static void tco_timer_enable(void)
static void tco_timer_enable(struct sp5100_tco *tco)
{
if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
u32 val;
switch (tco->tco_reg_layout) {
case sb800:
/* For SB800 or later */
/* Set the Watchdog timer resolution to 1 sec */
sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONFIG,
......@@ -151,9 +174,8 @@ static void tco_timer_enable(void)
sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONTROL,
~SB800_PM_WATCHDOG_DISABLE,
SB800_PCI_WATCHDOG_DECODE_EN);
} else {
u32 val;
break;
case sp5100:
/* For SP5100 or SB7x0 */
/* Enable watchdog decode bit */
pci_read_config_dword(sp5100_tco_pci,
......@@ -170,6 +192,13 @@ static void tco_timer_enable(void)
sp5100_tco_update_pm_reg8(SP5100_PM_WATCHDOG_CONTROL,
~SP5100_PM_WATCHDOG_DISABLE,
SP5100_PM_WATCHDOG_SECOND_RES);
break;
case efch:
/* Set the Watchdog timer resolution to 1 sec and enable */
sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN3,
~EFCH_PM_WATCHDOG_DISABLE,
EFCH_PM_DECODEEN_SECOND_RES);
break;
}
}
......@@ -189,89 +218,113 @@ static int sp5100_tco_setupdevice(struct device *dev,
{
struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
const char *dev_name;
u8 base_addr;
u32 val;
u32 mmio_addr = 0, val;
int ret;
/*
* Determine type of southbridge chipset.
*/
if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
dev_name = SP5100_DEVNAME;
base_addr = SP5100_PM_WATCHDOG_BASE;
} else {
dev_name = SB800_DEVNAME;
base_addr = SB800_PM_WATCHDOG_BASE;
}
/* Request the IO ports used by this driver */
if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
SP5100_PM_IOPORTS_SIZE, dev_name)) {
SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
dev_err(dev, "I/O address 0x%04x already in use\n",
SP5100_IO_PM_INDEX_REG);
return -EBUSY;
}
/*
* First, Find the watchdog timer MMIO address from indirect I/O.
* Low three bits of BASE are reserved.
* Determine type of southbridge chipset.
*/
val = sp5100_tco_read_pm_reg32(base_addr) & 0xfffffff8;
dev_dbg(dev, "Got 0x%04x from indirect I/O\n", val);
switch (tco->tco_reg_layout) {
case sp5100:
dev_name = SP5100_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
0xfffffff8;
break;
case sb800:
dev_name = SB800_DEVNAME;
mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
0xfffffff8;
break;
case efch:
dev_name = SB800_DEVNAME;
val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
if (val & EFCH_PM_DECODEEN_WDT_TMREN)
mmio_addr = EFCH_PM_WDT_ADDR;
break;
default:
return -ENODEV;
}
/* Check MMIO address conflict */
if (!devm_request_mem_region(dev, val, SP5100_WDT_MEM_MAP_SIZE,
if (!mmio_addr ||
!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
dev_name)) {
dev_dbg(dev, "MMIO address 0x%04x already in use\n", val);
if (mmio_addr)
dev_dbg(dev, "MMIO address 0x%08x already in use\n",
mmio_addr);
switch (tco->tco_reg_layout) {
case sp5100:
/*
* Secondly, Find the watchdog timer MMIO address
* from SBResource_MMIO register.
*/
if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
pci_read_config_dword(sp5100_tco_pci,
SP5100_SB_RESOURCE_MMIO_BASE,
&val);
} else {
/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
&mmio_addr);
if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
SB800_ACPI_MMIO_SEL)) !=
SB800_ACPI_MMIO_DECODE_EN) {
ret = -ENODEV;
goto unreg_region;
}
/* The SBResource_MMIO is enabled and mapped memory space? */
if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) !=
mmio_addr &= ~0xFFF;
mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
break;
case sb800:
/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
mmio_addr =
sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
SB800_ACPI_MMIO_SEL)) !=
SB800_ACPI_MMIO_DECODE_EN) {
dev_notice(dev,
"failed to find MMIO address, giving up.\n");
ret = -ENODEV;
goto unreg_region;
}
/* Clear unnecessary the low twelve bits */
val &= ~0xFFF;
/* Add the Watchdog Timer offset to base address. */
val += SB800_PM_WDT_MMIO_OFFSET;
/* Check MMIO address conflict */
if (!devm_request_mem_region(dev, val, SP5100_WDT_MEM_MAP_SIZE,
mmio_addr &= ~0xFFF;
mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
break;
case efch:
val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
ret = -ENODEV;
goto unreg_region;
}
mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
EFCH_PM_ACPI_MMIO_WDT_OFFSET;
break;
}
dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
mmio_addr);
if (!devm_request_mem_region(dev, mmio_addr,
SP5100_WDT_MEM_MAP_SIZE,
dev_name)) {
dev_dbg(dev, "MMIO address 0x%04x already in use\n",
val);
dev_dbg(dev, "MMIO address 0x%08x already in use\n",
mmio_addr);
ret = -EBUSY;
goto unreg_region;
}
dev_dbg(dev, "Got 0x%04x from SBResource_MMIO register\n", val);
}
tco->tcobase = devm_ioremap(dev, val, SP5100_WDT_MEM_MAP_SIZE);
tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
if (!tco->tcobase) {
dev_err(dev, "failed to get tcobase address\n");
ret = -ENOMEM;
goto unreg_region;
}
dev_info(dev, "Using 0x%04x for watchdog MMIO address\n", val);
dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
/* Setup the watchdog timer */
tco_timer_enable();
tco_timer_enable(tco);
val = readl(SP5100_WDT_CONTROL(tco->tcobase));
if (val & SP5100_WDT_DISABLED) {
......@@ -332,6 +385,8 @@ static int sp5100_tco_probe(struct platform_device *pdev)
if (!tco)
return -ENOMEM;
tco->tco_reg_layout = tco_reg_layout(sp5100_tco_pci);
wdd = &tco->wdd;
wdd->parent = dev;
wdd->info = &sp5100_tco_wdt_info;
......
......@@ -62,3 +62,24 @@
#define SB800_PM_WDT_MMIO_OFFSET 0xB00
#define SB800_DEVNAME "SB800 TCO"
/* For recent chips with embedded FCH (rev 40+) */
#define EFCH_PM_DECODEEN 0x00
#define EFCH_PM_DECODEEN_WDT_TMREN BIT(7)
#define EFCH_PM_DECODEEN3 0x00
#define EFCH_PM_DECODEEN_SECOND_RES GENMASK(1, 0)
#define EFCH_PM_WATCHDOG_DISABLE ((u8)GENMASK(3, 2))
/* WDT MMIO if enabled with PM00_DECODEEN_WDT_TMREN */
#define EFCH_PM_WDT_ADDR 0xfeb00000
#define EFCH_PM_ISACONTROL 0x04
#define EFCH_PM_ISACONTROL_MMIOEN BIT(1)
#define EFCH_PM_ACPI_MMIO_ADDR 0xfed80000
#define EFCH_PM_ACPI_MMIO_WDT_OFFSET 0x00000b00
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment