Skip to content

L
linux
Commit 88886662 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: icp_multi: remove ICP_MULTI_EXTDEBUG 

This define enables a bunch of function trace messages. These
should be removed in the final driver.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 554e02c9
Show whitespace changes
Inline Side-by-side
Showing with 3 additions and 126 deletions
drivers/staging/comedi/drivers/icp_multi.c
View file @ 88886662
......@@ -60,8 +60,6 @@ There are 4 x 12-bit Analogue Outputs. Ranges : 5V, 10V, +/-5V, +/-10V
#define PCI_DEVICE_ID_ICP_MULTI 0x8000
#define ICP_MULTI_EXTDEBUG
/* Hardware types of the cards */
#define TYPE_ICP_MULTI 0
......@@ -194,10 +192,6 @@ static void setup_channel_list(struct comedi_device *dev,
unsigned int i, range, chanprog;
unsigned int diff;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: setup_channel_list(...,%d)\n", n_chan);
#endif
devpriv->act_chanlist_len = n_chan;
devpriv->act_chanlist_pos = 0;
......@@ -235,14 +229,7 @@ static void setup_channel_list(struct comedi_device *dev,
/* Output channel, range, mode to ICP Multi */
writew(devpriv->AdcCmdStatus,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
devpriv->act_chanlist[i]);
#endif
}
}
/*
......@@ -269,9 +256,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
{
int n, timeout;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi EDBG: BGN: icp_multi_insn_read_ai(...)\n");
#endif
/* Disable A/D conversion ready interrupt */
devpriv->IntEnable &= ~ADC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
......@@ -283,12 +267,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
/* Set up appropriate channel, mode and range data, for specified ch */
setup_channel_list(dev, s, &insn->chanspec, 1);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp_multi A ST=%4x IO=%p\n",
readw(devpriv->io_addr + ICP_MULTI_ADC_CSR),
devpriv->io_addr + ICP_MULTI_ADC_CSR);
#endif
for (n = 0; n < insn->n; n++) {
/* Set start ADC bit */
devpriv->AdcCmdStatus |= ADC_ST;
......@@ -296,18 +274,8 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
devpriv->io_addr + ICP_MULTI_ADC_CSR);
devpriv->AdcCmdStatus &= ~ADC_ST;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi B n=%d ST=%4x\n", n,
readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
#endif
udelay(1);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi C n=%d ST=%4x\n", n,
readw(devpriv->io_addr + ICP_MULTI_ADC_CSR));
#endif
/* Wait for conversion to complete, or get fed up waiting */
timeout = 100;
while (timeout--) {
......@@ -315,15 +283,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
ICP_MULTI_ADC_CSR) & ADC_BSY))
goto conv_finish;
#ifdef ICP_MULTI_EXTDEBUG
if (!(timeout % 10))
printk(KERN_DEBUG
"icp multi D n=%d tm=%d ST=%4x\n", n,
timeout,
readw(devpriv->io_addr +
ICP_MULTI_ADC_CSR));
#endif
udelay(1);
}
......@@ -342,11 +301,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
/* Clear data received */
data[n] = 0;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: icp_multi_insn_read_ai(...) n=%d\n",
n);
#endif
return -ETIME;
conv_finish:
......@@ -362,10 +316,6 @@ static int icp_multi_insn_read_ai(struct comedi_device *dev,
devpriv->IntStatus |= ADC_READY;
writew(devpriv->IntStatus, devpriv->io_addr + ICP_MULTI_INT_STAT);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: icp_multi_insn_read_ai(...) n=%d\n", n);
#endif
return n;
}
......@@ -393,10 +343,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
{
int n, chan, range, timeout;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: BGN: icp_multi_insn_write_ao(...)\n");
#endif
/* Disable D/A conversion ready interrupt */
devpriv->IntEnable &= ~DAC_READY;
writew(devpriv->IntEnable, devpriv->io_addr + ICP_MULTI_INT_EN);
......@@ -429,15 +375,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
ICP_MULTI_DAC_CSR) & DAC_BSY))
goto dac_ready;
#ifdef ICP_MULTI_EXTDEBUG
if (!(timeout % 10))
printk(KERN_DEBUG
"icp multi A n=%d tm=%d ST=%4x\n", n,
timeout,
readw(devpriv->io_addr +
ICP_MULTI_DAC_CSR));
#endif
udelay(1);
}
......@@ -456,11 +393,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
/* Clear data received */
devpriv->ao_data[chan] = 0;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: icp_multi_insn_write_ao(...) n=%d\n",
n);
#endif
return -ETIME;
dac_ready:
......@@ -477,10 +409,6 @@ static int icp_multi_insn_write_ao(struct comedi_device *dev,
devpriv->ao_data[chan] = data[n];
}
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: icp_multi_insn_write_ao(...) n=%d\n", n);
#endif
return n;
}
......@@ -567,10 +495,6 @@ static int icp_multi_insn_bits_do(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
{
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi EDBG: BGN: icp_multi_insn_bits_do(...)\n");
#endif
if (data[0]) {
s->state &= ~data[0];
s->state |= (data[0] & data[1]);
......@@ -582,9 +506,6 @@ static int icp_multi_insn_bits_do(struct comedi_device *dev,
data[1] = readw(devpriv->io_addr + ICP_MULTI_DI);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi EDBG: END: icp_multi_insn_bits_do(...)\n");
#endif
return insn->n;
}
......@@ -659,24 +580,12 @@ static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
struct comedi_device *dev = d;
int int_no;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: BGN: interrupt_service_icp_multi(%d,...)\n",
irq);
#endif
/* Is this interrupt from our board? */
int_no = readw(devpriv->io_addr + ICP_MULTI_INT_STAT) & Status_IRQ;
if (!int_no)
/* No, exit */
return IRQ_NONE;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: interrupt_service_icp_multi() ST: %4x\n",
readw(devpriv->io_addr + ICP_MULTI_INT_STAT));
#endif
/* Determine which interrupt is active & handle it */
switch (int_no) {
case ADC_READY:
......@@ -700,10 +609,6 @@ static irqreturn_t interrupt_service_icp_multi(int irq, void *d)
}
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: interrupt_service_icp_multi(...)\n");
#endif
return IRQ_HANDLED;
}
......@@ -734,10 +639,6 @@ static int check_channel_list(struct comedi_device *dev,
{
unsigned int i;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: check_channel_list(...,%d)\n", n_chan);
#endif
/* Check that we at least have one channel to check */
if (n_chan < 1) {
comedi_error(dev, "range/channel list is empty!");
......@@ -783,10 +684,6 @@ static int icp_multi_reset(struct comedi_device *dev)
{
unsigned int i;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp_multi EDBG: BGN: icp_multi_reset(...)\n");
#endif
/* Clear INT enables and requests */
writew(0, devpriv->io_addr + ICP_MULTI_INT_EN);
writew(0x00ff, devpriv->io_addr + ICP_MULTI_INT_STAT);
......@@ -815,10 +712,6 @@ static int icp_multi_reset(struct comedi_device *dev)
/* Digital outputs to 0 */
writew(0, devpriv->io_addr + ICP_MULTI_DO);
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"icp multi EDBG: END: icp_multi_reset(...)\n");
#endif
return 0;
}
......@@ -841,15 +734,8 @@ static int icp_multi_attach(struct comedi_device *dev,
return ret;
/* Initialise list of PCI cards in system, if not already done so */
if (pci_list_builded++ == 0) {
pci_card_list_init(PCI_VENDOR_ID_ICP,
#ifdef ICP_MULTI_EXTDEBUG
1
#else
0
#endif
);
}
if (pci_list_builded++ == 0)
pci_card_list_init(PCI_VENDOR_ID_ICP, 0);
printk(KERN_WARNING
"Anne's comedi%d: icp_multi: board=%s", dev->minor,
......@@ -883,11 +769,6 @@ static int icp_multi_attach(struct comedi_device *dev,
printk(KERN_WARNING "ioremap failed.\n");
return -ENOMEM;
}
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG
"0x%08llx mapped to %p, ", (unsigned long long)iobase,
devpriv->io_addr);
#endif
dev->board_name = this_board->name;
......@@ -952,7 +833,7 @@ static int icp_multi_attach(struct comedi_device *dev,
s->n_chan = this_board->n_aochan;
s->maxdata = this_board->ao_maxdata;
s->len_chanlist = this_board->n_aochan;
s->range_table = this_board->rangelist_ao;
s->range_table = &range_analog;
s->insn_write = icp_multi_insn_write_ao;
s->insn_read = icp_multi_insn_read_ao;
subdev++;
......@@ -1000,10 +881,6 @@ static int icp_multi_attach(struct comedi_device *dev,
devpriv->valid = 1;
#ifdef ICP_MULTI_EXTDEBUG
printk(KERN_DEBUG "icp multi EDBG: END: icp_multi_attach(...)\n");
#endif
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7