Commit 88baad2e authored by Andrew F. Davis's avatar Andrew F. Davis Committed by Greg Kroah-Hartman

regulator: tps65086: Fix expected switch DT node names

commit 1c47f7c3 upstream.

The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: default avatarSteven Kipisz <s-kipisz2@ti.com>
Signed-off-by: default avatarAndrew F. Davis <afd@ti.com>
Tested-by: default avatarSteven Kipisz <s-kipisz2@ti.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 9846c679
...@@ -156,8 +156,8 @@ static struct tps65086_regulator regulators[] = { ...@@ -156,8 +156,8 @@ static struct tps65086_regulator regulators[] = {
VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0), VDOA23_VID_MASK, TPS65086_LDOA3CTRL, BIT(0),
tps65086_ldoa23_ranges, 0, 0), tps65086_ldoa23_ranges, 0, 0),
TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)), TPS65086_SWITCH("SWA1", "swa1", SWA1, TPS65086_SWVTT_EN, BIT(5)),
TPS65086_SWITCH("SWB1", "swa2", SWB1, TPS65086_SWVTT_EN, BIT(6)), TPS65086_SWITCH("SWB1", "swb1", SWB1, TPS65086_SWVTT_EN, BIT(6)),
TPS65086_SWITCH("SWB2", "swa3", SWB2, TPS65086_SWVTT_EN, BIT(7)), TPS65086_SWITCH("SWB2", "swb2", SWB2, TPS65086_SWVTT_EN, BIT(7)),
TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)), TPS65086_SWITCH("VTT", "vtt", VTT, TPS65086_SWVTT_EN, BIT(4)),
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment