PCI: xilinx: Add Xilinx AXI PCIe Host Bridge IP driver

This is the driver for Xilinx AXI PCIe Host Bridge Soft IP.

[bhelgaas: minor whitespace fixes]
Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/pci/xilinx-pcie.txt

+* Xilinx AXI PCIe Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
+- reg: Should contain AXI PCIe registers location and length
+- device_type: must be "pci"
+- interrupts: Should contain AXI PCIe interrupt
+- interrupt-map-mask,
+  interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+Optional properties:
+- bus-range: PCI bus numbers covered
+
+Interrupt controller child node
++++++++++++++++++++++++++++++++
+Required properties:
+- interrupt-controller: identifies the node as an interrupt controller
+- #address-cells: specifies the number of cells needed to encode an
+	address. The value must be 0.
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+
+NOTE:
+The core provides a single interrupt for both INTx/MSI messages. So,
+created a interrupt controller node to support 'interrupt-map' DT
+functionality.  The driver will create an IRQ domain for this map, decode
+the four INTx interrupts in ISR and route them to this domain.
+
+
+Example:
+++++++++
+
+	pci_express: axi-pcie@50000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = < 0x50000000 0x10000000 >;
+		device_type = "pci";
+		interrupts = < 0 52 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		}
+	};

drivers/pci/host/Kconfig

@@ -63,4 +63,11 @@ config PCIE_SPEAR13XX
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
 
+config PCIE_XILINX
+	bool "Xilinx AXI PCIe host bridge support"
+	depends on ARCH_ZYNQ
+	help
+	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
+	  Host Bridge driver.
+
 endmenu

drivers/pci/host/Makefile

@@ -8,3 +8,4 @@ obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
 obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
 obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
+obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o

drivers/pci/host/pcie-xilinx.c

+/*
+ * PCIe host controller driver for Xilinx AXI PCIe Bridge
+ *
+ * Copyright (c) 2012 - 2014 Xilinx, Inc.
+ *
+ * Based on the Tegra PCIe driver
+ *
+ * Bits taken from Synopsys Designware Host controller driver and
+ * ARM PCI Host generic driver.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* Register definitions */
+#define XILINX_PCIE_REG_BIR		0x00000130
+#define XILINX_PCIE_REG_IDR		0x00000138
+#define XILINX_PCIE_REG_IMR		0x0000013c
+#define XILINX_PCIE_REG_PSCR		0x00000144
+#define XILINX_PCIE_REG_RPSC		0x00000148
+#define XILINX_PCIE_REG_MSIBASE1	0x0000014c
+#define XILINX_PCIE_REG_MSIBASE2	0x00000150
+#define XILINX_PCIE_REG_RPEFR		0x00000154
+#define XILINX_PCIE_REG_RPIFR1		0x00000158
+#define XILINX_PCIE_REG_RPIFR2		0x0000015c
+
+/* Interrupt registers definitions */
+#define XILINX_PCIE_INTR_LINK_DOWN	BIT(0)
+#define XILINX_PCIE_INTR_ECRC_ERR	BIT(1)
+#define XILINX_PCIE_INTR_STR_ERR	BIT(2)
+#define XILINX_PCIE_INTR_HOT_RESET	BIT(3)
+#define XILINX_PCIE_INTR_CFG_TIMEOUT	BIT(8)
+#define XILINX_PCIE_INTR_CORRECTABLE	BIT(9)
+#define XILINX_PCIE_INTR_NONFATAL	BIT(10)
+#define XILINX_PCIE_INTR_FATAL		BIT(11)
+#define XILINX_PCIE_INTR_INTX		BIT(16)
+#define XILINX_PCIE_INTR_MSI		BIT(17)
+#define XILINX_PCIE_INTR_SLV_UNSUPP	BIT(20)
+#define XILINX_PCIE_INTR_SLV_UNEXP	BIT(21)
+#define XILINX_PCIE_INTR_SLV_COMPL	BIT(22)
+#define XILINX_PCIE_INTR_SLV_ERRP	BIT(23)
+#define XILINX_PCIE_INTR_SLV_CMPABT	BIT(24)
+#define XILINX_PCIE_INTR_SLV_ILLBUR	BIT(25)
+#define XILINX_PCIE_INTR_MST_DECERR	BIT(26)
+#define XILINX_PCIE_INTR_MST_SLVERR	BIT(27)
+#define XILINX_PCIE_INTR_MST_ERRP	BIT(28)
+#define XILINX_PCIE_IMR_ALL_MASK	0x1FF30FED
+#define XILINX_PCIE_IDR_ALL_MASK	0xFFFFFFFF
+
+/* Root Port Error FIFO Read Register definitions */
+#define XILINX_PCIE_RPEFR_ERR_VALID	BIT(18)
+#define XILINX_PCIE_RPEFR_REQ_ID	GENMASK(15, 0)
+#define XILINX_PCIE_RPEFR_ALL_MASK	0xFFFFFFFF
+
+/* Root Port Interrupt FIFO Read Register 1 definitions */
+#define XILINX_PCIE_RPIFR1_INTR_VALID	BIT(31)
+#define XILINX_PCIE_RPIFR1_MSI_INTR	BIT(30)
+#define XILINX_PCIE_RPIFR1_INTR_MASK	GENMASK(28, 27)
+#define XILINX_PCIE_RPIFR1_ALL_MASK	0xFFFFFFFF
+#define XILINX_PCIE_RPIFR1_INTR_SHIFT	27
+
+/* Bridge Info Register definitions */
+#define XILINX_PCIE_BIR_ECAM_SZ_MASK	GENMASK(18, 16)
+#define XILINX_PCIE_BIR_ECAM_SZ_SHIFT	16
+
+/* Root Port Interrupt FIFO Read Register 2 definitions */
+#define XILINX_PCIE_RPIFR2_MSG_DATA	GENMASK(15, 0)
+
+/* Root Port Status/control Register definitions */
+#define XILINX_PCIE_REG_RPSC_BEN	BIT(0)
+
+/* Phy Status/Control Register definitions */
+#define XILINX_PCIE_REG_PSCR_LNKUP	BIT(11)
+
+/* ECAM definitions */
+#define ECAM_BUS_NUM_SHIFT		20
+#define ECAM_DEV_NUM_SHIFT		12
+
+/* Number of MSI IRQs */
+#define XILINX_NUM_MSI_IRQS		128
+
+/* Number of Memory Resources */
+#define XILINX_MAX_NUM_RESOURCES	3
+
+/**
+ * struct xilinx_pcie_port - PCIe port information
+ * @reg_base: IO Mapped Register Base
+ * @irq: Interrupt number
+ * @msi_pages: MSI pages
+ * @root_busno: Root Bus number
+ * @dev: Device pointer
+ * @irq_domain: IRQ domain pointer
+ * @bus_range: Bus range
+ * @resources: Bus Resources
+ */
+struct xilinx_pcie_port {
+	void __iomem *reg_base;
+	u32 irq;
+	unsigned long msi_pages;
+	u8 root_busno;
+	struct device *dev;
+	struct irq_domain *irq_domain;
+	struct resource bus_range;
+	struct list_head resources;
+};
+
+static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+
+static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
+{
+	return sys->private_data;
+}
+
+static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
+{
+	return readl(port->reg_base + reg);
+}
+
+static inline void pcie_write(struct xilinx_pcie_port *port, u32 val, u32 reg)
+{
+	writel(val, port->reg_base + reg);
+}
+
+static inline bool xilinx_pcie_link_is_up(struct xilinx_pcie_port *port)
+{
+	return (pcie_read(port, XILINX_PCIE_REG_PSCR) &
+		XILINX_PCIE_REG_PSCR_LNKUP) ? 1 : 0;
+}
+
+/**
+ * xilinx_pcie_clear_err_interrupts - Clear Error Interrupts
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
+{
+	u32 val = pcie_read(port, XILINX_PCIE_REG_RPEFR);
+
+	if (val & XILINX_PCIE_RPEFR_ERR_VALID) {
+		dev_dbg(port->dev, "Requester ID %d\n",
+			val & XILINX_PCIE_RPEFR_REQ_ID);
+		pcie_write(port, XILINX_PCIE_RPEFR_ALL_MASK,
+			   XILINX_PCIE_REG_RPEFR);
+	}
+}
+
+/**
+ * xilinx_pcie_valid_device - Check if a valid device is present on bus
+ * @bus: PCI Bus structure
+ * @devfn: device/function
+ *
+ * Return: 'true' on success and 'false' if invalid device is found
+ */
+static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+
+	/* Check if link is up when trying to access downstream ports */
+	if (bus->number != port->root_busno)
+		if (!xilinx_pcie_link_is_up(port))
+			return false;
+
+	/* Only one device down on each root port */
+	if (bus->number == port->root_busno && devfn > 0)
+		return false;
+
+	/*
+	 * Do not read more than one device on the bus directly attached
+	 * to RC.
+	 */
+	if (bus->primary == port->root_busno && devfn > 0)
+		return false;
+
+	return true;
+}
+
+/**
+ * xilinx_pcie_config_base - Get configuration base
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ *	   accessed.
+ */
+static void __iomem *xilinx_pcie_config_base(struct pci_bus *bus,
+					     unsigned int devfn, int where)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	int relbus;
+
+	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
+		 (devfn << ECAM_DEV_NUM_SHIFT);
+
+	return port->reg_base + relbus + where;
+}
+
+/**
+ * xilinx_pcie_read_config - Read configuration space
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be read
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ *	   PCIBIOS_DEVICE_NOT_FOUND on failure
+ */
+static int xilinx_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	void __iomem *addr;
+
+	if (!xilinx_pcie_valid_device(bus, devfn)) {
+		*val = 0xFFFFFFFF;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	addr = xilinx_pcie_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		*val = readb(addr);
+		break;
+	case 2:
+		*val = readw(addr);
+		break;
+	default:
+		*val = readl(addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * xilinx_pcie_write_config - Write configuration space
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be written to device
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ *	   PCIBIOS_DEVICE_NOT_FOUND on failure
+ */
+static int xilinx_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	void __iomem *addr;
+
+	if (!xilinx_pcie_valid_device(bus, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = xilinx_pcie_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		writeb(val, addr);
+		break;
+	case 2:
+		writew(val, addr);
+		break;
+	default:
+		writel(val, addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCIe operations */
+static struct pci_ops xilinx_pcie_ops = {
+	.read  = xilinx_pcie_read_config,
+	.write = xilinx_pcie_write_config,
+};
+
+/* MSI functions */
+
+/**
+ * xilinx_pcie_destroy_msi - Free MSI number
+ * @irq: IRQ to be freed
+ */
+static void xilinx_pcie_destroy_msi(unsigned int irq)
+{
+	struct irq_desc *desc;
+	struct msi_desc *msi;
+	struct xilinx_pcie_port *port;
+
+	desc = irq_to_desc(irq);
+	msi = irq_desc_get_msi_desc(desc);
+	port = sys_to_pcie(msi->dev->bus->sysdata);
+
+	if (!test_bit(irq, msi_irq_in_use))
+		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
+	else
+		clear_bit(irq, msi_irq_in_use);
+}
+
+/**
+ * xilinx_pcie_assign_msi - Allocate MSI number
+ * @port: PCIe port structure
+ *
+ * Return: A valid IRQ on success and error value on failure.
+ */
+static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port)
+{
+	int pos;
+
+	pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
+	if (pos < XILINX_NUM_MSI_IRQS)
+		set_bit(pos, msi_irq_in_use);
+	else
+		return -ENOSPC;
+
+	return pos;
+}
+
+/**
+ * xilinx_msi_teardown_irq - Destroy the MSI
+ * @chip: MSI Chip descriptor
+ * @irq: MSI IRQ to destroy
+ */
+static void xilinx_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+{
+	xilinx_pcie_destroy_msi(irq);
+}
+
+/**
+ * xilinx_pcie_msi_setup_irq - Setup MSI request
+ * @chip: MSI chip pointer
+ * @pdev: PCIe device pointer
+ * @desc: MSI descriptor pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_msi_setup_irq(struct msi_chip *chip,
+				     struct pci_dev *pdev,
+				     struct msi_desc *desc)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	unsigned int irq;
+	int hwirq;
+	struct msi_msg msg;
+	phys_addr_t msg_addr;
+
+	hwirq = xilinx_pcie_assign_msi(port);
+	if (irq < 0)
+		return irq;
+
+	irq = irq_create_mapping(port->irq_domain, hwirq);
+	if (!irq)
+		return -EINVAL;
+
+	irq_set_msi_desc(irq, desc);
+
+	msg_addr = virt_to_phys((void *)port->msi_pages);
+
+	msg.address_hi = 0;
+	msg.address_lo = msg_addr;
+	msg.data = irq;
+
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+/* MSI Chip Descriptor */
+static struct msi_chip xilinx_pcie_msi_chip = {
+	.setup_irq = xilinx_pcie_msi_setup_irq,
+	.teardown_irq = xilinx_msi_teardown_irq,
+};
+
+/* HW Interrupt Chip Descriptor */
+static struct irq_chip xilinx_msi_irq_chip = {
+	.name = "Xilinx PCIe MSI",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+/**
+ * xilinx_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int xilinx_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &xilinx_msi_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+/* IRQ Domain operations */
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = xilinx_pcie_msi_map,
+};
+
+/**
+ * xilinx_pcie_enable_msi - Enable MSI support
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_enable_msi(struct xilinx_pcie_port *port)
+{
+	phys_addr_t msg_addr;
+
+	port->msi_pages = __get_free_pages(GFP_KERNEL, 0);
+	msg_addr = virt_to_phys((void *)port->msi_pages);
+	pcie_write(port, 0x0, XILINX_PCIE_REG_MSIBASE1);
+	pcie_write(port, msg_addr, XILINX_PCIE_REG_MSIBASE2);
+}
+
+/**
+ * xilinx_pcie_add_bus - Add MSI chip info to PCIe bus
+ * @bus: PCIe bus
+ */
+static void xilinx_pcie_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+
+		xilinx_pcie_msi_chip.dev = port->dev;
+		bus->msi = &xilinx_pcie_msi_chip;
+	}
+}
+
+/* INTx Functions */
+
+/**
+ * xilinx_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int xilinx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+/* INTx IRQ Domain operations */
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = xilinx_pcie_intx_map,
+};
+
+/* PCIe HW Functions */
+
+/**
+ * xilinx_pcie_intr_handler - Interrupt Service Handler
+ * @irq: IRQ number
+ * @data: PCIe port information
+ *
+ * Return: IRQ_HANDLED on success and IRQ_NONE on failure
+ */
+static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
+{
+	struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
+	u32 val, mask, status, msi_data;
+
+	/* Read interrupt decode and mask registers */
+	val = pcie_read(port, XILINX_PCIE_REG_IDR);
+	mask = pcie_read(port, XILINX_PCIE_REG_IMR);
+
+	status = val & mask;
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & XILINX_PCIE_INTR_LINK_DOWN)
+		dev_warn(port->dev, "Link Down\n");
+
+	if (status & XILINX_PCIE_INTR_ECRC_ERR)
+		dev_warn(port->dev, "ECRC failed\n");
+
+	if (status & XILINX_PCIE_INTR_STR_ERR)
+		dev_warn(port->dev, "Streaming error\n");
+
+	if (status & XILINX_PCIE_INTR_HOT_RESET)
+		dev_info(port->dev, "Hot reset\n");
+
+	if (status & XILINX_PCIE_INTR_CFG_TIMEOUT)
+		dev_warn(port->dev, "ECAM access timeout\n");
+
+	if (status & XILINX_PCIE_INTR_CORRECTABLE) {
+		dev_warn(port->dev, "Correctable error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_NONFATAL) {
+		dev_warn(port->dev, "Non fatal error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_FATAL) {
+		dev_warn(port->dev, "Fatal error message\n");
+		xilinx_pcie_clear_err_interrupts(port);
+	}
+
+	if (status & XILINX_PCIE_INTR_INTX) {
+		/* INTx interrupt received */
+		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+		/* Check whether interrupt valid */
+		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+			return IRQ_HANDLED;
+		}
+
+		/* Clear interrupt FIFO register 1 */
+		pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+			   XILINX_PCIE_REG_RPIFR1);
+
+		/* Handle INTx Interrupt */
+		val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
+			XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
+		generic_handle_irq(irq_find_mapping(port->irq_domain, val));
+	}
+
+	if (status & XILINX_PCIE_INTR_MSI) {
+		/* MSI Interrupt */
+		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+
+		if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
+			dev_warn(port->dev, "RP Intr FIFO1 read error\n");
+			return IRQ_HANDLED;
+		}
+
+		if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
+			msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
+				   XILINX_PCIE_RPIFR2_MSG_DATA;
+
+			/* Clear interrupt FIFO register 1 */
+			pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+				   XILINX_PCIE_REG_RPIFR1);
+
+			if (IS_ENABLED(CONFIG_PCI_MSI)) {
+				/* Handle MSI Interrupt */
+				generic_handle_irq(msi_data);
+			}
+		}
+	}
+
+	if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
+		dev_warn(port->dev, "Slave unsupported request\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_UNEXP)
+		dev_warn(port->dev, "Slave unexpected completion\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_COMPL)
+		dev_warn(port->dev, "Slave completion timeout\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_ERRP)
+		dev_warn(port->dev, "Slave Error Poison\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_CMPABT)
+		dev_warn(port->dev, "Slave Completer Abort\n");
+
+	if (status & XILINX_PCIE_INTR_SLV_ILLBUR)
+		dev_warn(port->dev, "Slave Illegal Burst\n");
+
+	if (status & XILINX_PCIE_INTR_MST_DECERR)
+		dev_warn(port->dev, "Master decode error\n");
+
+	if (status & XILINX_PCIE_INTR_MST_SLVERR)
+		dev_warn(port->dev, "Master slave error\n");
+
+	if (status & XILINX_PCIE_INTR_MST_ERRP)
+		dev_warn(port->dev, "Master error poison\n");
+
+	/* Clear the Interrupt Decode register */
+	pcie_write(port, status, XILINX_PCIE_REG_IDR);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * xilinx_pcie_free_irq_domain - Free IRQ domain
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
+{
+	int i;
+	u32 irq, num_irqs;
+
+	/* Free IRQ Domain */
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+
+		free_pages(port->msi_pages, 0);
+
+		num_irqs = XILINX_NUM_MSI_IRQS;
+	} else {
+		/* INTx */
+		num_irqs = 4;
+	}
+
+	for (i = 0; i < num_irqs; i++) {
+		irq = irq_find_mapping(port->irq_domain, i);
+		if (irq > 0)
+			irq_dispose_mapping(irq);
+	}
+
+	irq_domain_remove(port->irq_domain);
+}
+
+/**
+ * xilinx_pcie_init_irq_domain - Initialize IRQ domain
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *pcie_intc_node;
+
+	/* Setup INTx */
+	pcie_intc_node = of_get_next_child(node, NULL);
+	if (!pcie_intc_node) {
+		dev_err(dev, "No PCIe Intc node found\n");
+		return PTR_ERR(pcie_intc_node);
+	}
+
+	port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
+						 &intx_domain_ops,
+						 port);
+	if (!port->irq_domain) {
+		dev_err(dev, "Failed to get a INTx IRQ domain\n");
+		return PTR_ERR(port->irq_domain);
+	}
+
+	/* Setup MSI */
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		port->irq_domain = irq_domain_add_linear(node,
+							 XILINX_NUM_MSI_IRQS,
+							 &msi_domain_ops,
+							 &xilinx_pcie_msi_chip);
+		if (!port->irq_domain) {
+			dev_err(dev, "Failed to get a MSI IRQ domain\n");
+			return PTR_ERR(port->irq_domain);
+		}
+
+		xilinx_pcie_enable_msi(port);
+	}
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_init_port - Initialize hardware
+ * @port: PCIe port information
+ */
+static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
+{
+	if (xilinx_pcie_link_is_up(port))
+		dev_info(port->dev, "PCIe Link is UP\n");
+	else
+		dev_info(port->dev, "PCIe Link is DOWN\n");
+
+	/* Disable all interrupts */
+	pcie_write(port, ~XILINX_PCIE_IDR_ALL_MASK,
+		   XILINX_PCIE_REG_IMR);
+
+	/* Clear pending interrupts */
+	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_IDR) &
+			 XILINX_PCIE_IMR_ALL_MASK,
+		   XILINX_PCIE_REG_IDR);
+
+	/* Enable all interrupts */
+	pcie_write(port, XILINX_PCIE_IMR_ALL_MASK, XILINX_PCIE_REG_IMR);
+
+	/* Enable the Bridge enable bit */
+	pcie_write(port, pcie_read(port, XILINX_PCIE_REG_RPSC) |
+			 XILINX_PCIE_REG_RPSC_BEN,
+		   XILINX_PCIE_REG_RPSC);
+}
+
+/**
+ * xilinx_pcie_setup - Setup memory resources
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: '1' on success and error value on failure
+ */
+static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(sys);
+
+	list_splice_init(&port->resources, &sys->resources);
+
+	return 1;
+}
+
+/**
+ * xilinx_pcie_scan_bus - Scan PCIe bus for devices
+ * @nr: Bus number
+ * @sys: Per controller structure
+ *
+ * Return: Valid Bus pointer on success and NULL on failure
+ */
+static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct xilinx_pcie_port *port = sys_to_pcie(sys);
+	struct pci_bus *bus;
+
+	port->root_busno = sys->busnr;
+	bus = pci_scan_root_bus(port->dev, sys->busnr, &xilinx_pcie_ops,
+				sys, &sys->resources);
+
+	return bus;
+}
+
+/**
+ * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct resource *mem;
+	resource_size_t offset;
+	struct of_pci_range_parser parser;
+	struct of_pci_range range;
+	struct pci_host_bridge_window *win;
+	int err = 0, mem_resno = 0;
+
+	/* Get the ranges */
+	if (of_pci_range_parser_init(&parser, node)) {
+		dev_err(dev, "missing \"ranges\" property\n");
+		return -EINVAL;
+	}
+
+	/* Parse the ranges and add the resources found to the list */
+	for_each_of_pci_range(&parser, &range) {
+
+		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
+			dev_err(dev, "Maximum memory resources exceeded\n");
+			return -EINVAL;
+		}
+
+		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
+		if (!mem) {
+			err = -ENOMEM;
+			goto free_resources;
+		}
+
+		of_pci_range_to_resource(&range, node, mem);
+
+		switch (mem->flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_MEM:
+			offset = range.cpu_addr - range.pci_addr;
+			mem_resno++;
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+
+		if (err < 0) {
+			dev_warn(dev, "Invalid resource found %pR\n", mem);
+			continue;
+		}
+
+		err = request_resource(&iomem_resource, mem);
+		if (err)
+			goto free_resources;
+
+		pci_add_resource_offset(&port->resources, mem, offset);
+	}
+
+	/* Get the bus range */
+	if (of_pci_parse_bus_range(node, &port->bus_range)) {
+		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
+		u8 last;
+
+		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
+			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
+
+		port->bus_range = (struct resource) {
+			.name	= node->name,
+			.start	= 0,
+			.end	= last,
+			.flags	= IORESOURCE_BUS,
+		};
+	}
+
+	/* Register bus resource */
+	pci_add_resource(&port->resources, &port->bus_range);
+
+	return 0;
+
+free_resources:
+	release_child_resources(&iomem_resource);
+	list_for_each_entry(win, &port->resources, list)
+		devm_kfree(dev, win->res);
+	pci_free_resource_list(&port->resources);
+
+	return err;
+}
+
+/**
+ * xilinx_pcie_parse_dt - Parse Device tree
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct resource regs;
+	const char *type;
+	int err;
+
+	type = of_get_property(node, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	err = of_address_to_resource(node, 0, &regs);
+	if (err) {
+		dev_err(dev, "missing \"reg\" property\n");
+		return err;
+	}
+
+	port->reg_base = devm_ioremap_resource(dev, &regs);
+	if (IS_ERR(port->reg_base))
+		return PTR_ERR(port->reg_base);
+
+	port->irq = irq_of_parse_and_map(node, 0);
+	err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
+			       IRQF_SHARED, "xilinx-pcie", port);
+	if (err) {
+		dev_err(dev, "unable to request irq %d\n", port->irq);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_probe - Probe function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_pcie_probe(struct platform_device *pdev)
+{
+	struct xilinx_pcie_port *port;
+	struct hw_pci hw;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	port->dev = dev;
+
+	err = xilinx_pcie_parse_dt(port);
+	if (err) {
+		dev_err(dev, "Parsing DT failed\n");
+		return err;
+	}
+
+	xilinx_pcie_init_port(port);
+
+	err = xilinx_pcie_init_irq_domain(port);
+	if (err) {
+		dev_err(dev, "Failed creating IRQ Domain\n");
+		return err;
+	}
+
+	/*
+	 * Parse PCI ranges, configuration bus range and
+	 * request their resources
+	 */
+	INIT_LIST_HEAD(&port->resources);
+	err = xilinx_pcie_parse_and_add_res(port);
+	if (err) {
+		dev_err(dev, "Failed adding resources\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, port);
+
+	/* Register the device */
+	memset(&hw, 0, sizeof(hw));
+	hw = (struct hw_pci) {
+		.nr_controllers	= 1,
+		.private_data	= (void **)&port,
+		.setup		= xilinx_pcie_setup,
+		.map_irq	= of_irq_parse_and_map_pci,
+		.add_bus	= xilinx_pcie_add_bus,
+		.scan		= xilinx_pcie_scan_bus,
+		.ops		= &xilinx_pcie_ops,
+	};
+	pci_common_init_dev(dev, &hw);
+
+	return 0;
+}
+
+/**
+ * xilinx_pcie_remove - Remove function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' always
+ */
+static int xilinx_pcie_remove(struct platform_device *pdev)
+{
+	struct xilinx_pcie_port *port = platform_get_drvdata(pdev);
+
+	xilinx_pcie_free_irq_domain(port);
+
+	return 0;
+}
+
+static struct of_device_id xilinx_pcie_of_match[] = {
+	{ .compatible = "xlnx,axi-pcie-host-1.00.a", },
+	{}
+};
+
+static struct platform_driver xilinx_pcie_driver = {
+	.driver = {
+		.name = "xilinx-pcie",
+		.owner = THIS_MODULE,
+		.of_match_table = xilinx_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = xilinx_pcie_probe,
+	.remove = xilinx_pcie_remove,
+};
+module_platform_driver(xilinx_pcie_driver);
+
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Xilinx AXI PCIe driver");
+MODULE_LICENSE("GPL v2");