netfilter: move NAT Kconfig switches out of the iptables scope

Currently, the NAT configs depend on iptables and ip6tables. However,
users should be capable of enabling NAT for nft without having to
switch on iptables.

Fix this by adding new specific IP_NF_NAT and IP6_NF_NAT config
switches for iptables and ip6tables NAT support. I have also moved
the original NF_NAT_IPV4 and NF_NAT_IPV6 configs out of the scope
of iptables to make them independent of it.

This patch also adds NETFILTER_XT_NAT which selects the xt_nat
combo that provides snat/dnat for iptables. We cannot use NF_NAT
anymore since nf_tables can select this.
Reported-by: Matteo Croce <technoboy85@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

net/ipv4/netfilter/Kconfig

@@ -82,6 +82,52 @@ config NF_TABLES_ARP
 	help
 	  This option enables the ARP support for nf_tables.
 
+config NF_NAT_IPV4
+	tristate "IPv4 NAT"
+	depends on NF_CONNTRACK_IPV4
+	default m if NETFILTER_ADVANCED=n
+	select NF_NAT
+	help
+	  The IPv4 NAT option allows masquerading, port forwarding and other
+	  forms of full Network Address Port Translation. This can be
+	  controlled by iptables or nft.
+
+if NF_NAT_IPV4
+
+config NF_NAT_SNMP_BASIC
+	tristate "Basic SNMP-ALG support"
+	depends on NF_CONNTRACK_SNMP
+	depends on NETFILTER_ADVANCED
+	default NF_NAT && NF_CONNTRACK_SNMP
+	---help---
+
+	  This module implements an Application Layer Gateway (ALG) for
+	  SNMP payloads.  In conjunction with NAT, it allows a network
+	  management system to access multiple private networks with
+	  conflicting addresses.  It works by modifying IP addresses
+	  inside SNMP payloads to match IP-layer NAT mapping.
+
+	  This is the "basic" form of SNMP-ALG, as described in RFC 2962
+
+	  To compile it as a module, choose M here.  If unsure, say N.
+
+config NF_NAT_PROTO_GRE
+	tristate
+	depends on NF_CT_PROTO_GRE
+
+config NF_NAT_PPTP
+	tristate
+	depends on NF_CONNTRACK
+	default NF_CONNTRACK_PPTP
+	select NF_NAT_PROTO_GRE
+
+config NF_NAT_H323
+	tristate
+	depends on NF_CONNTRACK
+	default NF_CONNTRACK_H323
+
+endif # NF_NAT_IPV4
+
 config IP_NF_IPTABLES
 	tristate "IP tables support (required for filtering/masq/NAT)"
 	default m if NETFILTER_ADVANCED=n
@@ -170,19 +216,21 @@ config IP_NF_TARGET_SYNPROXY
 	  To compile it as a module, choose M here. If unsure, say N.
 
 # NAT + specific targets: nf_conntrack
-config NF_NAT_IPV4
-	tristate "IPv4 NAT"
+config IP_NF_NAT
+	tristate "iptables NAT support"
 	depends on NF_CONNTRACK_IPV4
 	default m if NETFILTER_ADVANCED=n
 	select NF_NAT
+	select NF_NAT_IPV4
+	select NETFILTER_XT_NAT
 	help
-	  The IPv4 NAT option allows masquerading, port forwarding and other
-	  forms of full Network Address Port Translation.  It is controlled by
-	  the `nat' table in iptables: see the man page for iptables(8).
+	  This enables the `nat' table in iptables. This allows masquerading,
+	  port forwarding and other forms of full Network Address Port
+	  Translation.
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-if NF_NAT_IPV4
+if IP_NF_NAT
 
 config IP_NF_TARGET_MASQUERADE
 	tristate "MASQUERADE target support"
@@ -214,47 +262,7 @@ config IP_NF_TARGET_REDIRECT
 	(e.g. when running oldconfig). It selects
 	CONFIG_NETFILTER_XT_TARGET_REDIRECT.
 
-endif
-
-config NF_NAT_SNMP_BASIC
-	tristate "Basic SNMP-ALG support"
-	depends on NF_CONNTRACK_SNMP && NF_NAT_IPV4
-	depends on NETFILTER_ADVANCED
-	default NF_NAT && NF_CONNTRACK_SNMP
-	---help---
-
-	  This module implements an Application Layer Gateway (ALG) for
-	  SNMP payloads.  In conjunction with NAT, it allows a network
-	  management system to access multiple private networks with
-	  conflicting addresses.  It works by modifying IP addresses
-	  inside SNMP payloads to match IP-layer NAT mapping.
-
-	  This is the "basic" form of SNMP-ALG, as described in RFC 2962
-
-	  To compile it as a module, choose M here.  If unsure, say N.
-
-# If they want FTP, set to $CONFIG_IP_NF_NAT (m or y),
-# or $CONFIG_IP_NF_FTP (m or y), whichever is weaker.
-# From kconfig-language.txt:
-#
-#           <expr> '&&' <expr>                   (6)
-#
-# (6) Returns the result of min(/expr/, /expr/).
-
-config NF_NAT_PROTO_GRE
-	tristate
-	depends on NF_NAT_IPV4 && NF_CT_PROTO_GRE
-
-config NF_NAT_PPTP
-	tristate
-	depends on NF_CONNTRACK && NF_NAT_IPV4
-	default NF_NAT_IPV4 && NF_CONNTRACK_PPTP
-	select NF_NAT_PROTO_GRE
-
-config NF_NAT_H323
-	tristate
-	depends on NF_CONNTRACK && NF_NAT_IPV4
-	default NF_NAT_IPV4 && NF_CONNTRACK_H323
+endif # IP_NF_NAT
 
 # mangle + specific targets
 config IP_NF_MANGLE

net/ipv4/netfilter/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_IP_NF_IPTABLES) += ip_tables.o
 # the three instances of ip_tables
 obj-$(CONFIG_IP_NF_FILTER) += iptable_filter.o
 obj-$(CONFIG_IP_NF_MANGLE) += iptable_mangle.o
-obj-$(CONFIG_NF_NAT_IPV4) += iptable_nat.o
+obj-$(CONFIG_IP_NF_NAT) += iptable_nat.o
 obj-$(CONFIG_IP_NF_RAW) += iptable_raw.o
 obj-$(CONFIG_IP_NF_SECURITY) += iptable_security.o
 

net/ipv6/netfilter/Kconfig

@@ -60,6 +60,16 @@ config NF_LOG_IPV6
 	depends on NETFILTER_ADVANCED
 	select NF_LOG_COMMON
 
+config NF_NAT_IPV6
+	tristate "IPv6 NAT"
+	depends on NF_CONNTRACK_IPV6
+	depends on NETFILTER_ADVANCED
+	select NF_NAT
+	help
+	  The IPv6 NAT option allows masquerading, port forwarding and other
+	  forms of full Network Address Port Translation. This can be
+	  controlled by iptables or nft.
+
 config IP6_NF_IPTABLES
 	tristate "IP6 tables support (required for filtering)"
 	depends on INET && IPV6
@@ -232,19 +242,21 @@ config IP6_NF_SECURITY
 
          If unsure, say N.
 
-config NF_NAT_IPV6
-	tristate "IPv6 NAT"
+config IP6_NF_NAT
+	tristate "ip6tables NAT support"
 	depends on NF_CONNTRACK_IPV6
 	depends on NETFILTER_ADVANCED
 	select NF_NAT
+	select NF_NAT_IPV6
+	select NETFILTER_XT_NAT
 	help
-	  The IPv6 NAT option allows masquerading, port forwarding and other
-	  forms of full Network Address Port Translation. It is controlled by
-	  the `nat' table in ip6tables, see the man page for ip6tables(8).
+	  This enables the `nat' table in ip6tables. This allows masquerading,
+	  port forwarding and other forms of full Network Address Port
+	  Translation.
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-if NF_NAT_IPV6
+if IP6_NF_NAT
 
 config IP6_NF_TARGET_MASQUERADE
 	tristate "MASQUERADE target support"
@@ -265,7 +277,7 @@ config IP6_NF_TARGET_NPT
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
-endif # NF_NAT_IPV6
+endif # IP6_NF_NAT
 
 endif # IP6_NF_IPTABLES
 

net/ipv6/netfilter/Makefile

@@ -8,7 +8,7 @@ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
 obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
 obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
 obj-$(CONFIG_IP6_NF_SECURITY) += ip6table_security.o
-obj-$(CONFIG_NF_NAT_IPV6) += ip6table_nat.o
+obj-$(CONFIG_IP6_NF_NAT) += ip6table_nat.o
 
 # objects for l3 independent conntrack
 nf_conntrack_ipv6-y  :=  nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o

net/netfilter/Makefile

@@ -95,7 +95,7 @@ obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
 obj-$(CONFIG_NETFILTER_XT_MARK) += xt_mark.o
 obj-$(CONFIG_NETFILTER_XT_CONNMARK) += xt_connmark.o
 obj-$(CONFIG_NETFILTER_XT_SET) += xt_set.o
-obj-$(CONFIG_NF_NAT) += xt_nat.o
+obj-$(CONFIG_NETFILTER_XT_NAT) += xt_nat.o
 
 # targets
 obj-$(CONFIG_NETFILTER_XT_TARGET_AUDIT) += xt_AUDIT.o