Commit 89cb7e7f authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman Committed by Greg Kroah-Hartman

Revert Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port

Reverts 02227c28
(Had to be done by hand due to other patches that had come after this.)

Turns out that we don't want the mac80211 port of this driver just yet, as
there is a different driver working on adding this support.

So keep things old and different for now.

This is being reverted at the request of the linux-wireless developers.

Cc: Kalle Valo <kalle.valo@iki.fi>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent f06da264
config USB_ATMEL
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && WLAN_80211 && USB
depends on WLAN_80211 && USB
default N
select FW_LOADER
---help---
......
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -34,6 +34,23 @@ enum board_type {
BOARD_505AMX = 8
};
/* our private ioctl's */
/* preamble length (0 - long, 1 - short, 2 - auto) */
#define AT76_SET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 0)
#define AT76_GET_SHORT_PREAMBLE (SIOCIWFIRSTPRIV + 1)
/* which debug channels are enabled */
#define AT76_SET_DEBUG (SIOCIWFIRSTPRIV + 2)
#define AT76_GET_DEBUG (SIOCIWFIRSTPRIV + 3)
/* power save mode (incl. the Atmel proprietary smart save mode) */
#define AT76_SET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 4)
#define AT76_GET_POWERSAVE_MODE (SIOCIWFIRSTPRIV + 5)
/* min and max channel times for scan */
#define AT76_SET_SCAN_TIMES (SIOCIWFIRSTPRIV + 6)
#define AT76_GET_SCAN_TIMES (SIOCIWFIRSTPRIV + 7)
/* scan mode (0 - active, 1 - passive) */
#define AT76_SET_SCAN_MODE (SIOCIWFIRSTPRIV + 8)
#define AT76_GET_SCAN_MODE (SIOCIWFIRSTPRIV + 9)
#define CMD_STATUS_IDLE 0x00
#define CMD_STATUS_COMPLETE 0x01
#define CMD_STATUS_UNKNOWN 0x02
......@@ -65,7 +82,6 @@ enum board_type {
#define MIB_MAC 0x03
#define MIB_MAC_MGMT 0x05
#define MIB_MAC_WEP 0x06
#define MIB_MAC_ENCRYPTION 0x06
#define MIB_PHY 0x07
#define MIB_FW_VERSION 0x08
#define MIB_MDOMAIN 0x09
......@@ -90,26 +106,6 @@ enum board_type {
#define AT76_PM_ON 2
#define AT76_PM_SMART 3
/* cipher values for encryption keys */
#define CIPHER_NONE 0 /* this value is only guessed */
#define CIPHER_WEP64 1
#define CIPHER_TKIP 2
#define CIPHER_CCMP 3
#define CIPHER_CCX 4 /* for consistency sake only */
#define CIPHER_WEP128 5
/* bit flags key types for encryption keys */
#define KEY_PAIRWISE 2
#define KEY_TX 4
#define CIPHER_KEYS (4)
#define CIPHER_KEY_LEN (40)
struct key_config {
u8 cipher;
u8 keylen;
};
struct hwcfg_r505 {
u8 cr39_values[14];
u8 reserved1[14];
......@@ -151,9 +147,6 @@ union at76_hwcfg {
#define WEP_SMALL_KEY_LEN (40 / 8)
#define WEP_LARGE_KEY_LEN (104 / 8)
#define WEP_KEYS (4)
struct at76_card_config {
u8 exclude_unencrypted;
......@@ -168,7 +161,7 @@ struct at76_card_config {
u8 privacy_invoked;
u8 wep_default_key_id; /* 0..3 */
u8 current_ssid[32];
u8 wep_default_key_value[4][WEP_LARGE_KEY_LEN];
u8 wep_default_key_value[4][WEP_KEY_LEN];
u8 ssid_len;
u8 short_preamble;
__le16 beacon_period;
......@@ -193,7 +186,7 @@ struct at76_rx_buffer {
u8 link_quality;
u8 noise_level;
__le32 rx_time;
u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
} __attribute__((packed));
/* Length of Atmel-specific Tx header before 802.11 frame */
......@@ -203,11 +196,8 @@ struct at76_tx_buffer {
__le16 wlength;
u8 tx_rate;
u8 padding;
u8 key_id;
u8 cipher_type;
u8 cipher_length;
u8 reserved;
u8 packet[IEEE80211_MAX_FRAG_THRESHOLD];
u8 reserved[4];
u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
} __attribute__((packed));
/* defines for scan_type below */
......@@ -254,7 +244,6 @@ struct set_mib_buffer {
u8 byte;
__le16 word;
u8 addr[ETH_ALEN];
u8 data[256]; /* we need more space for mib_mac_encryption */
} data;
} __attribute__((packed));
......@@ -328,24 +317,10 @@ struct mib_mac_wep {
u8 exclude_unencrypted;
__le32 wep_icv_error_count;
__le32 wep_excluded_count;
u8 wep_default_keyvalue[WEP_KEYS][WEP_LARGE_KEY_LEN];
u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN];
u8 encryption_level; /* 1 for 40bit, 2 for 104bit encryption */
} __attribute__((packed));
struct mib_mac_encryption {
u8 cipher_default_keyvalue[CIPHER_KEYS][CIPHER_KEY_LEN];
u8 tkip_bssid[6];
u8 privacy_invoked;
u8 cipher_default_key_id;
u8 cipher_default_group_key_id;
u8 exclude_unencrypted;
u8 wep_encryption_type;
u8 ckip_key_permutation; /* bool */
__le32 wep_icv_error_count;
__le32 wep_excluded_count;
u8 key_rsc[CIPHER_KEYS][8];
} __attribute__((packed));
struct mib_phy {
__le32 ed_threshold;
......@@ -389,6 +364,16 @@ struct at76_fw_header {
__le32 ext_fw_len; /* external firmware image length */
} __attribute__((packed));
enum mac_state {
MAC_INIT,
MAC_SCANNING,
MAC_AUTH,
MAC_ASSOC,
MAC_JOINING,
MAC_CONNECTED,
MAC_OWN_IBSS
};
/* a description of a regulatory domain and the allowed channels */
struct reg_domain {
u16 code;
......@@ -396,6 +381,47 @@ struct reg_domain {
u32 channel_map; /* if bit N is set, channel (N+1) is allowed */
};
/* how long do we keep a (I)BSS in the bss_list in jiffies
this should be long enough for the user to retrieve the table
(by iwlist ?) after the device started, because all entries from
other channels than the one the device locks on get removed, too */
#define BSS_LIST_TIMEOUT (120 * HZ)
/* struct to store BSS info found during scan */
#define BSS_LIST_MAX_RATE_LEN 32 /* 32 rates should be enough ... */
struct bss_info {
struct list_head list;
u8 bssid[ETH_ALEN]; /* bssid */
u8 ssid[IW_ESSID_MAX_SIZE]; /* essid */
u8 ssid_len; /* length of ssid above */
u8 channel;
u16 capa; /* BSS capabilities */
u16 beacon_interval; /* beacon interval, Kus (1024 microseconds) */
u8 rates[BSS_LIST_MAX_RATE_LEN]; /* supported rates in units of
500 kbps, ORed with 0x80 for
basic rates */
u8 rates_len;
/* quality of received beacon */
u8 rssi;
u8 link_qual;
u8 noise_level;
unsigned long last_rx; /* time (jiffies) of last beacon received */
};
/* a rx data buffer to collect rx fragments */
struct rx_data_buf {
u8 sender[ETH_ALEN]; /* sender address */
u16 seqnr; /* sequence number */
u16 fragnr; /* last fragment received */
unsigned long last_rx; /* jiffies of last rx */
struct sk_buff *skb; /* == NULL if entry is free */
};
#define NR_RX_DATA_BUF 8
/* Data for one loaded firmware file */
struct fwentry {
const char *const fwname;
......@@ -412,9 +438,11 @@ struct fwentry {
struct at76_priv {
struct usb_device *udev; /* USB device pointer */
struct net_device *netdev; /* net device pointer */
struct net_device_stats stats; /* net device stats */
struct iw_statistics wstats; /* wireless stats */
struct sk_buff *rx_skb; /* skbuff for receiving data */
struct sk_buff *tx_skb; /* skbuff for transmitting data */
void *bulk_out_buffer; /* buffer for sending data */
struct urb *tx_urb; /* URB for sending data */
......@@ -426,17 +454,26 @@ struct at76_priv {
struct mutex mtx; /* locks this structure */
/* work queues */
struct work_struct work_assoc_done;
struct work_struct work_join;
struct work_struct work_new_bss;
struct work_struct work_start_scan;
struct work_struct work_set_promisc;
struct work_struct work_submit_rx;
struct delayed_work dwork_hw_scan;
struct delayed_work dwork_restart;
struct delayed_work dwork_get_scan;
struct delayed_work dwork_beacon;
struct delayed_work dwork_auth;
struct delayed_work dwork_assoc;
struct tasklet_struct rx_tasklet;
/* the WEP stuff */
int wep_enabled; /* 1 if WEP is enabled */
int wep_key_id; /* key id to be used */
u8 wep_keys[WEP_KEYS][WEP_LARGE_KEY_LEN]; /* WEP keys */
u8 wep_keys_len[WEP_KEYS]; /* length of WEP keys */
u8 wep_keys[WEP_KEYS][WEP_KEY_LEN]; /* the four WEP keys,
5 or 13 bytes are used */
u8 wep_keys_len[WEP_KEYS]; /* the length of the above keys */
int channel;
int iw_mode;
......@@ -458,13 +495,44 @@ struct at76_priv {
int scan_mode; /* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
int scan_need_any; /* if set, need to scan for any ESSID */
/* the list we got from scanning */
spinlock_t bss_list_spinlock; /* protects bss_list operations */
struct list_head bss_list; /* list of BSS we got beacons from */
struct timer_list bss_list_timer; /* timer to purge old entries
from bss_list */
struct bss_info *curr_bss; /* current BSS */
u16 assoc_id; /* current association ID, if associated */
u8 wanted_bssid[ETH_ALEN];
int wanted_bssid_valid; /* != 0 if wanted_bssid is to be used */
/* some data for infrastructure mode only */
spinlock_t mgmt_spinlock; /* this spinlock protects access to
next_mgmt_bulk */
struct at76_tx_buffer *next_mgmt_bulk; /* pending management msg to
send via bulk out */
enum mac_state mac_state;
enum {
SCAN_IDLE,
SCAN_IN_PROGRESS,
SCAN_COMPLETED
} scan_state;
time_t last_scan;
int retries; /* remaining retries in case of timeout when
* sending AuthReq or AssocReq */
u8 pm_mode; /* power management mode */
u32 pm_period; /* power management period in microseconds */
struct reg_domain const *domain; /* reg domain description */
/* iwspy support */
spinlock_t spy_spinlock;
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
/* These fields contain HW config provided by the device (not all of
* these fields are used by all board types) */
u8 mac_addr[ETH_ALEN];
......@@ -472,6 +540,9 @@ struct at76_priv {
struct at76_card_config card_config;
/* store rx fragments until complete */
struct rx_data_buf rx_data[NR_RX_DATA_BUF];
enum board_type board_type;
struct mib_fw_version fw_version;
......@@ -479,20 +550,58 @@ struct at76_priv {
unsigned int netdev_registered:1;
struct set_mib_buffer mib_buf; /* global buffer for set_mib calls */
/* beacon counting */
int beacon_period; /* period of mgmt beacons, Kus */
int beacons_received;
unsigned long beacons_last_qual; /* time we restarted counting
beacons */
};
struct ieee80211_hw *hw;
int mac80211_registered;
struct key_config keys[4]; /* installed key types */
u8 default_pairwise_key;
u8 default_group_key;
struct at76_rx_radiotap {
struct ieee80211_radiotap_header rt_hdr;
__le64 rt_tsft;
u8 rt_flags;
u8 rt_rate;
s8 rt_signal;
s8 rt_noise;
};
#define AT76_SUPPORTED_FILTERS FIF_PROMISC_IN_BSS
#define AT76_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DB_ANTNOISE))
#define BEACON_MAX_DATA_LENGTH 1500
/* the maximum size of an AssocReq packet */
#define ASSOCREQ_MAX_SIZE \
(AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \
1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4)
/* for shared secret auth, add the challenge text size */
#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth))
/* Maximal number of AuthReq retries */
#define AUTH_RETRIES 3
/* Maximal number of AssocReq retries */
#define ASSOC_RETRIES 3
/* Beacon timeout in managed mode when we are connected */
#define BEACON_TIMEOUT (10 * HZ)
/* Timeout for authentication response */
#define AUTH_TIMEOUT (1 * HZ)
/* Timeout for association response */
#define ASSOC_TIMEOUT (1 * HZ)
/* Polling interval when scan is running */
#define SCAN_POLL_INTERVAL (HZ / 4)
/* Command completion timeout */
#define CMD_COMPLETION_TIMEOUT (5 * HZ)
#define DEF_RTS_THRESHOLD 1536
......@@ -502,6 +611,8 @@ struct at76_priv {
#define DEF_SCAN_MIN_TIME 10
#define DEF_SCAN_MAX_TIME 120
#define MAX_RTS_THRESHOLD (MAX_FRAG_THRESHOLD + 1)
/* the max padding size for tx in bytes (see calc_padding) */
#define MAX_PADDING_SIZE 53
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment