Merge redhat.com:/spare/repo/linux-2.5

into redhat.com:/spare/repo/net-drivers-2.5

Documentation/kernel-parameters.txt

@@ -790,7 +790,8 @@ running once the system is up.
 			before loading.
 			See Documentation/ramdisk.txt.
 
-	psmouse_noext	[HW,MOUSE] Disable probing for PS2 mouse protocol extensions
+	psmouse_proto=  [HW,MOUSE] Highest PS2 mouse protocol extension to
+			probe for (bare|imps|exps).
 
 	psmouse_resetafter=
 			[HW,MOUSE] Try to reset Synaptics Touchpad after so many

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -test11
+EXTRAVERSION =
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/i386/kernel/irq.c

@@ -505,6 +505,20 @@ asmlinkage unsigned int do_IRQ(struct pt_regs regs)
 	return 1;
 }
 
+int can_request_irq(unsigned int irq, unsigned long irqflags)
+{
+	struct irqaction *action;
+
+	if (irq >= NR_IRQS)
+		return 0;
+	action = irq_desc[irq].action;
+	if (action) {
+		if (irqflags & action->flags & SA_SHIRQ)
+			action = NULL;
+	}
+	return !action;
+}
+
 /**
  *	request_irq - allocate an interrupt line
  *	@irq: Interrupt line to allocate

arch/i386/lib/usercopy.c

@@ -541,8 +541,10 @@ unsigned long __copy_to_user_ll(void __user *to, const void *from, unsigned long
 				goto survive;
 			}
 
-			if (retval != 1)
+			if (retval != 1) {
+				up_read(&current->mm->mmap_sem);
 		       		break;
+		       	}
 
 			maddr = kmap_atomic(pg, KM_USER0);
 			memcpy(maddr + offset, from, len);

arch/i386/pci/irq.c

@@ -695,11 +695,6 @@ static struct irq_info *pirq_get_info(struct pci_dev *dev)
 	return NULL;
 }
 
-static irqreturn_t pcibios_test_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
-{
-	return IRQ_NONE;
-}
-
 static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 {
 	u8 pin;
@@ -761,13 +756,10 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
 				continue;
-			if (pirq_penalty[i] < pirq_penalty[newirq] &&
-			    !request_irq(i, pcibios_test_irq_handler, SA_SHIRQ, "pci-test", dev)) {
-				free_irq(i, dev);
+			if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, SA_SHIRQ))
 				newirq = i;
 		}
 	}
-	}
 	DBG(" -> newirq=%d", newirq);
 
 	/* Check if it is hardcoded */

drivers/block/ll_rw_blk.c

@@ -2460,7 +2460,7 @@ static int __end_that_request_first(struct request *req, int uptodate,
 
 	if (!uptodate) {
 		error = -EIO;
-		if (!(req->flags & REQ_QUIET))
+		if (blk_fs_request(req) && !(req->flags & REQ_QUIET))
 			printk("end_request: I/O error, dev %s, sector %llu\n",
 				req->rq_disk ? req->rq_disk->disk_name : "?",
 				(unsigned long long)req->sector);

drivers/block/scsi_ioctl.c

@@ -150,7 +150,6 @@ static int sg_io(request_queue_t *q, struct block_device *bdev,
 	struct request *rq;
 	struct bio *bio;
 	char sense[SCSI_SENSE_BUFFERSIZE];
-	unsigned char cdb[BLK_MAX_CDB];
 	void *buffer;
 
 	if (hdr->interface_id != 'S')
@@ -167,9 +166,6 @@ static int sg_io(request_queue_t *q, struct block_device *bdev,
 	if (hdr->dxfer_len > (q->max_sectors << 9))
 		return -EIO;
 
-	if (copy_from_user(cdb, hdr->cmdp, hdr->cmd_len))
-		return -EFAULT;
-
 	reading = writing = 0;
 	buffer = NULL;
 	bio = NULL;
@@ -220,7 +216,7 @@ static int sg_io(request_queue_t *q, struct block_device *bdev,
 	 * fill in request structure
 	 */
 	rq->cmd_len = hdr->cmd_len;
-	memcpy(rq->cmd, cdb, hdr->cmd_len);
+	memcpy(rq->cmd, hdr->cmdp, hdr->cmd_len);
 	if (sizeof(rq->cmd) != hdr->cmd_len)
 		memset(rq->cmd + hdr->cmd_len, 0, sizeof(rq->cmd) - hdr->cmd_len);
 
@@ -436,12 +432,23 @@ int scsi_cmd_ioctl(struct block_device *bdev, unsigned int cmd, unsigned long ar
 			break;
 		case SG_IO: {
 			struct sg_io_hdr hdr;
+			unsigned char cdb[BLK_MAX_CDB], *old_cdb;
 
-			if (copy_from_user(&hdr, (struct sg_io_hdr *) arg, sizeof(hdr))) {
 			err = -EFAULT;
+			if (copy_from_user(&hdr, (struct sg_io_hdr *) arg, sizeof(hdr)))
 				break;
-			}
+			err = -EINVAL;
+			if (hdr.cmd_len > sizeof(rq->cmd))
+				break;
+			err = -EFAULT;
+			if (copy_from_user(cdb, hdr.cmdp, hdr.cmd_len))
+				break;
+
+			old_cdb = hdr.cmdp;
+			hdr.cmdp = cdb;
 			err = sg_io(q, bdev, &hdr);
+
+			hdr.cmdp = old_cdb;
 			if (copy_to_user((struct sg_io_hdr *) arg, &hdr, sizeof(hdr)))
 				err = -EFAULT;
 			break;

drivers/char/keyboard.c

@@ -941,16 +941,16 @@ static unsigned short x86_keycodes[256] =
 	 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
 	 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
 	 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
-	 80, 81, 82, 83, 43, 85, 86, 87, 88,115,119,120,121,375,123, 90,
-	284,285,309,298,312, 91,327,328,329,331,333,335,336,337,338,339,
-	367,288,302,304,350, 92,334,512,116,377,109,111,373,347,348,349,
-	360, 93, 94, 95, 98,376,100,101,321,316,354,286,289,102,351,355,
+	 80, 81, 82, 83, 84, 93, 86, 87, 88, 94, 95, 85,259,375,260, 90,
+	284,285,309,311,312, 91,327,328,329,331,333,335,336,337,338,339,
+	367,288,302,304,350, 89,334,326,116,377,109,111,126,347,348,349,
+	360,261,262,263,298,376,100,101,321,316,373,286,289,102,351,355,
 	103,104,105,275,287,279,306,106,274,107,294,364,358,363,362,361,
-	291,108,381,281,290,272,292,305,280, 99,112,257,258,359,270,114,
-	118,117,125,374,379,115,112,125,121,123,264,265,266,267,268,269,
-	271,273,276,277,278,282,283,295,296,297,299,300,301,293,303,307,
-	308,310,313,314,315,317,318,319,320,357,322,323,324,325,326,330,
-	332,340,365,342,343,344,345,346,356,113,341,368,369,370,371,372 };
+	291,108,381,281,290,272,292,305,280, 99,112,257,258,359,113,114,
+	264,117,271,374,379,115,125,273,121,123, 92,265,266,267,268,269,
+	120,119,118,277,278,282,283,295,296,297,299,300,301,293,303,307,
+	308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330,
+	332,340,365,342,343,344,345,346,356,270,341,368,369,370,371,372 };
 
 #ifdef CONFIG_MAC_EMUMOUSEBTN
 extern int mac_hid_mouse_emulate_buttons(int, int, int);
@@ -972,11 +972,18 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
 	if (keycode > 255 || !x86_keycodes[keycode])
 		return -1; 
 
-	if (keycode == KEY_PAUSE) {
+	switch (keycode) {
+		case KEY_PAUSE:
 			put_queue(vc, 0xe1);
 			put_queue(vc, 0x1d | up_flag);
 			put_queue(vc, 0x45 | up_flag);
 			return 0;
+		case KEY_LANG1:
+			if (!up_flag) put_queue(vc, 0xf1);
+			return 0;
+		case KEY_LANG2:
+			if (!up_flag) put_queue(vc, 0xf2);
+			return 0;
 	} 
 
 	if (keycode == KEY_SYSRQ && sysrq_alt) {

drivers/ide/ide-cd.c

@@ -799,6 +799,10 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 			 * sector...  If we got here the error is not correctable */
 			ide_dump_status (drive, "media error (bad sector)", stat);
 			do_end_request = 1;
+		} else if (sense_key == BLANK_CHECK) {
+			/* Disk appears blank ?? */
+			ide_dump_status (drive, "media error (blank)", stat);
+			do_end_request = 1;
 		} else if ((err & ~ABRT_ERR) != 0) {
 			/* Go to the default handler
 			   for other errors. */

drivers/ide/ide-cd.h

@@ -501,6 +501,7 @@ struct cdrom_info {
 #define ILLEGAL_REQUEST         0x05
 #define UNIT_ATTENTION          0x06
 #define DATA_PROTECT            0x07
+#define BLANK_CHECK             0x08
 #define ABORTED_COMMAND         0x0b
 #define MISCOMPARE              0x0e
 
@@ -578,7 +579,7 @@ const char * const sense_key_texts[16] = {
 	"Illegal request",
 	"Unit attention",
 	"Data protect",
-	"(reserved)",
+	"Blank check",
 	"(reserved)",
 	"(reserved)",
 	"Aborted command",

drivers/input/input.c

@@ -447,6 +447,7 @@ void input_register_device(struct input_dev *dev)
 	list_add_tail(&dev->node, &input_dev_list);
 
 	list_for_each_entry(handler, &input_handler_list, node)
+		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
 			if ((id = input_match_device(handler->id_table, dev)))
 				if ((handle = handler->connect(handler, dev, id)))
 					input_link_handle(handle);
@@ -507,6 +508,7 @@ void input_register_handler(struct input_handler *handler)
 	list_add_tail(&handler->node, &input_handler_list);
 	
 	list_for_each_entry(dev, &input_dev_list, node)
+		if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
 			if ((id = input_match_device(handler->id_table, dev)))
 				if ((handle = handler->connect(handler, dev, id)))
 					input_link_handle(handle);

drivers/input/joydev.c

@@ -380,10 +380,6 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct
 	struct joydev *joydev;
 	int i, j, t, minor;
 
-	/* Avoid tablets */
-        if (test_bit(EV_KEY, dev->evbit) && test_bit(BTN_TOUCH, dev->keybit))
-		return NULL;
-
 	for (minor = 0; minor < JOYDEV_MINORS && joydev_table[minor]; minor++);
 	if (minor == JOYDEV_MINORS) {
 		printk(KERN_ERR "joydev: no more free joydev devices\n");
@@ -464,6 +460,15 @@ static void joydev_disconnect(struct input_handle *handle)
 		joydev_free(joydev);
 }
 
+static struct input_device_id joydev_blacklist[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_KEYBIT,
+		.evbit = { BIT(EV_KEY) },
+		.keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
+	}, 	/* Avoid itouchpads, touchscreens and tablets */
+	{ }, 	/* Terminating entry */
+};
+
 static struct input_device_id joydev_ids[] = {
 	{
 		.flags = INPUT_DEVICE_ID_MATCH_EVBIT | INPUT_DEVICE_ID_MATCH_ABSBIT,
@@ -493,6 +498,7 @@ static struct input_handler joydev_handler = {
 	.minor =	JOYDEV_MINOR_BASE,
 	.name =		"joydev",
 	.id_table =	joydev_ids,
+	.blacklist = 	joydev_blacklist,
 };
 
 static int __init joydev_init(void)

drivers/input/mouse/Kconfig

@@ -23,27 +23,18 @@ config MOUSE_PS2
 	  mice with wheels and extra buttons, Microsoft, Logitech or Genius
 	  compatible.
 
+	  Synaptics TouchPad users might be interested in a specialized
+	  XFree86 driver at:
+		http://w1.894.telia.com/~u89404340/touchpad/index.html
+	  and a new verion of GPM at:
+		http://www.geocities.com/dt_or/gpm/gpm.html
+	  to take advantage of the advanced features of the touchpad.
+
 	  If unsure, say Y.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called psmouse.
 
-config MOUSE_PS2_SYNAPTICS
-	bool "Synaptics TouchPad"
-	default n
-	depends on INPUT && INPUT_MOUSE && MOUSE_PS2
-	---help---
-	  Say Y here if you have a Synaptics TouchPad connected to your system.
-	  This touchpad is found on many modern laptop computers.
-
-	  Note that you also need a user space driver to interpret the data
-	  generated by the kernel. A compatible driver for XFree86 is available
-	  from http://w1.894.telia.com/~u89404340/touchpad/index.html
-
-	  The gpm program is not yet able to interpret the data from this
-	  driver, so if you need to use the touchpad in the console, you have to
-	  say N for now.
-
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	depends on INPUT && INPUT_MOUSE

drivers/input/mouse/logips2pp.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/input.h>
+#include <linux/serio.h>
 #include "psmouse.h"
 #include "logips2pp.h"
 
@@ -142,7 +143,7 @@ void ps2pp_set_800dpi(struct psmouse *psmouse)
  * touchpad.
  */
 
-int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param)
+static int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param)
 {
 	int i;
 	static int logitech_4btn[] = { 12, 40, 41, 42, 43, 52, 73, 80, -1 };
@@ -226,3 +227,22 @@ int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param)
 
 	return 0;
 }
+
+/*
+ * Logitech magic init.
+ */
+int ps2pp_detect(struct psmouse *psmouse)
+{
+	unsigned char param[4];
+
+	param[0] = 0;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	psmouse_command(psmouse,  NULL, PSMOUSE_CMD_SETSCALE11);
+	param[1] = 0;
+	psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
+
+	return param[1] != 0 ? ps2pp_detect_model(psmouse, param) : 0;
+}
+

drivers/input/mouse/logips2pp.h

@@ -13,5 +13,5 @@
 struct psmouse;
 void ps2pp_process_packet(struct psmouse *psmouse);
 void ps2pp_set_800dpi(struct psmouse *psmouse);
-int ps2pp_detect_model(struct psmouse *psmouse, unsigned char *param);
+int ps2pp_detect(struct psmouse *psmouse);
 #endif

drivers/input/mouse/psmouse.h

@@ -22,10 +22,20 @@
 #define PSMOUSE_ACTIVATED	1
 #define PSMOUSE_IGNORE		2
 
+struct psmouse;
+
+struct psmouse_ptport {
+	struct serio serio;
+
+	void (*activate)(struct psmouse *parent);
+	void (*deactivate)(struct psmouse *parent);
+};
+
 struct psmouse {
 	void *private;
 	struct input_dev dev;
 	struct serio *serio;
+	struct psmouse_ptport *ptport;
 	char *vendor;
 	char *name;
 	unsigned char cmdbuf[8];
@@ -41,6 +51,9 @@ struct psmouse {
 	char error;
 	char devname[64];
 	char phys[32];
+
+	int (*reconnect)(struct psmouse *psmouse);
+	void (*disconnect)(struct psmouse *psmouse);
 };
 
 #define PSMOUSE_PS2		1

drivers/input/mouse/synaptics.c

@@ -2,7 +2,8 @@
  * Synaptics TouchPad PS/2 mouse driver
  *
  *   2003 Dmitry Torokhov <dtor@mail.ru>
- *     Added support for pass-through port
+ *     Added support for pass-through port. Special thanks to Peter Berg Larsen
+ *     for explaining various Synaptics quirks.
  *
  *   2003 Peter Osterlund <petero2@telia.com>
  *     Ported to 2.5 input device infrastructure.
@@ -194,9 +195,7 @@ static void print_ident(struct synaptics_data *priv)
 
 static int synaptics_query_hardware(struct psmouse *psmouse)
 {
-	struct synaptics_data *priv = psmouse->private;
 	int retries = 0;
-	int mode;
 
 	while ((retries++ < 3) && synaptics_reset(psmouse))
 		printk(KERN_ERR "synaptics reset failed\n");
@@ -208,7 +207,14 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
 	if (synaptics_capability(psmouse))
 		return -1;
 
-	mode = SYN_BIT_ABSOLUTE_MODE | SYN_BIT_HIGH_RATE;
+	return 0;
+}
+
+static int synaptics_set_mode(struct psmouse *psmouse, int mode)
+{
+	struct synaptics_data *priv = psmouse->private;
+
+	mode |= SYN_BIT_ABSOLUTE_MODE | SYN_BIT_HIGH_RATE;
 	if (SYN_ID_MAJOR(priv->identity) >= 4)
 		mode |= SYN_BIT_DISABLE_GESTURE;
 	if (SYN_CAP_EXTENDED(priv->capabilities))
@@ -265,49 +271,38 @@ static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet
 	}
 }
 
-int synaptics_pt_init(struct psmouse *psmouse)
+static void synaptics_pt_activate(struct psmouse *psmouse)
 {
-	struct synaptics_data *priv = psmouse->private;
-	struct serio *port;
-	struct psmouse *child;
+	struct psmouse *child = psmouse->ptport->serio.private;
 
-	if (psmouse->type != PSMOUSE_SYNAPTICS)
-		return -1;
-	if (!SYN_CAP_EXTENDED(priv->capabilities))
-		return -1;
-	if (!SYN_CAP_PASS_THROUGH(priv->capabilities))
-		return -1;
+	/* adjust the touchpad to child's choice of protocol */
+	if (child && child->type >= PSMOUSE_GENPS) {
+		if (synaptics_set_mode(psmouse, SYN_BIT_FOUR_BYTE_CLIENT))
+			printk(KERN_INFO "synaptics: failed to enable 4-byte guest protocol\n");
+	}
+}
+
+static void synaptics_pt_create(struct psmouse *psmouse)
+{
+	struct psmouse_ptport *port;
 
-	priv->ptport = port = kmalloc(sizeof(struct serio), GFP_KERNEL);
+	psmouse->ptport = port = kmalloc(sizeof(struct psmouse_ptport), GFP_KERNEL);
 	if (!port) {
-		printk(KERN_ERR "synaptics: not enough memory to allocate serio port\n");
-		return -1;
+		printk(KERN_ERR "synaptics: not enough memory to allocate pass-through port\n");
+		return;
 	}
 
-	memset(port, 0, sizeof(struct serio));
-	port->type = SERIO_PS_PSTHRU;
-	port->name = "Synaptics pass-through";
-	port->phys = "synaptics-pt/serio0";
-	port->write = synaptics_pt_write;
-	port->open = synaptics_pt_open;
-	port->close = synaptics_pt_close;
-	port->driver = psmouse;
+	memset(port, 0, sizeof(struct psmouse_ptport));
 
-	printk(KERN_INFO "serio: %s port at %s\n", port->name, psmouse->phys);
-	serio_register_slave_port(port);
+	port->serio.type = SERIO_PS_PSTHRU;
+	port->serio.name = "Synaptics pass-through";
+	port->serio.phys = "synaptics-pt/serio0";
+	port->serio.write = synaptics_pt_write;
+	port->serio.open = synaptics_pt_open;
+	port->serio.close = synaptics_pt_close;
+	port->serio.driver = psmouse;
 
-	/* adjust the touchpad to child's choice of protocol */
-	child = port->private;
-	if (child && child->type >= PSMOUSE_GENPS) {
-		if (synaptics_mode_cmd(psmouse, (SYN_BIT_ABSOLUTE_MODE |
-					 	 SYN_BIT_HIGH_RATE |
-					 	 SYN_BIT_DISABLE_GESTURE |
-						 SYN_BIT_FOUR_BYTE_CLIENT |
-					 	 SYN_BIT_W_MODE)))
-			printk(KERN_INFO "synaptics: failed to enable 4-byte guest protocol\n");
-	}
-
-	return 0;
+	port->activate = synaptics_pt_activate;
 }
 
 /*****************************************************************************
@@ -371,13 +366,57 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	clear_bit(REL_Y, dev->relbit);
 }
 
-int synaptics_init(struct psmouse *psmouse)
+static void synaptics_disconnect(struct psmouse *psmouse)
 {
-	struct synaptics_data *priv;
+	synaptics_mode_cmd(psmouse, 0);
+	kfree(psmouse->private);
+}
 
-#ifndef CONFIG_MOUSE_PS2_SYNAPTICS
+static int synaptics_reconnect(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	struct synaptics_data old_priv = *priv;
+
+	if (!synaptics_detect(psmouse))
+		return -1;
+
+	if (synaptics_query_hardware(psmouse)) {
+		printk(KERN_ERR "Unable to query Synaptics hardware.\n");
 		return -1;
-#endif
+	}
+
+	if (old_priv.identity != priv->identity ||
+	    old_priv.model_id != priv->model_id ||
+	    old_priv.capabilities != priv->capabilities ||
+    	    old_priv.ext_cap != priv->ext_cap)
+    		return -1;
+
+	if (synaptics_set_mode(psmouse, 0)) {
+		printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int synaptics_detect(struct psmouse *psmouse)
+{
+	unsigned char param[4];
+
+	param[0] = 0;
+
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+	psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
+
+	return param[1] == 0x47;
+}
+
+int synaptics_init(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv;
 
 	psmouse->private = priv = kmalloc(sizeof(struct synaptics_data), GFP_KERNEL);
 	if (!priv)
@@ -385,13 +424,24 @@ int synaptics_init(struct psmouse *psmouse)
 	memset(priv, 0, sizeof(struct synaptics_data));
 
 	if (synaptics_query_hardware(psmouse)) {
-		printk(KERN_ERR "Unable to query/initialize Synaptics hardware.\n");
+		printk(KERN_ERR "Unable to query Synaptics hardware.\n");
+		goto init_fail;
+	}
+
+	if (synaptics_set_mode(psmouse, 0)) {
+		printk(KERN_ERR "Unable to initialize Synaptics hardware.\n");
 		goto init_fail;
 	}
 
+	if (SYN_CAP_EXTENDED(priv->capabilities) && SYN_CAP_PASS_THROUGH(priv->capabilities))
+       		synaptics_pt_create(psmouse);
+
 	print_ident(priv);
 	set_input_params(&psmouse->dev, priv);
 
+	psmouse->disconnect = synaptics_disconnect;
+	psmouse->reconnect = synaptics_reconnect;
+
 	return 0;
 
  init_fail:
@@ -399,36 +449,13 @@ int synaptics_init(struct psmouse *psmouse)
 	return -1;
 }
 
-void synaptics_disconnect(struct psmouse *psmouse)
-{
-	struct synaptics_data *priv = psmouse->private;
-
-	if (psmouse->type == PSMOUSE_SYNAPTICS && priv) {
-		synaptics_mode_cmd(psmouse, 0);
-		if (priv->ptport) {
-			serio_unregister_slave_port(priv->ptport);
-			kfree(priv->ptport);
-		}
-		kfree(priv);
-	}
-}
-
 /*****************************************************************************
  *	Functions to interpret the absolute mode packets
  ****************************************************************************/
 
 static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw)
 {
-	hw->up    = 0;
-	hw->down  = 0;
-	hw->b0    = 0;
-	hw->b1    = 0;
-	hw->b2    = 0;
-	hw->b3    = 0;
-	hw->b4    = 0;
-	hw->b5    = 0;
-	hw->b6    = 0;
-	hw->b7    = 0;
+	memset(hw, 0, sizeof(struct synaptics_hw_state));
 
 	if (SYN_MODEL_NEWABS(priv->model_id)) {
 		hw->x = (((buf[3] & 0x10) << 8) |
@@ -570,64 +597,47 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+static int synaptics_validate_byte(struct psmouse *psmouse)
+{
+	static unsigned char newabs_mask[] = { 0xC0, 0x00, 0x00, 0xC0, 0x00 };
+	static unsigned char newabs_rslt[] = { 0x80, 0x00, 0x00, 0xC0, 0x00 };
+	static unsigned char oldabs_mask[] = { 0xC0, 0x60, 0x00, 0xC0, 0x60 };
+	static unsigned char oldabs_rslt[] = { 0xC0, 0x00, 0x00, 0x80, 0x00 };
+	struct synaptics_data *priv = psmouse->private;
+	int idx = psmouse->pktcnt - 1;
+
+	if (SYN_MODEL_NEWABS(priv->model_id))
+		return (psmouse->packet[idx] & newabs_mask[idx]) == newabs_rslt[idx];
+	else
+		return (psmouse->packet[idx] & oldabs_mask[idx]) == oldabs_rslt[idx];
+}
+
 void synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
 {
 	struct input_dev *dev = &psmouse->dev;
 	struct synaptics_data *priv = psmouse->private;
-	unsigned char data = psmouse->packet[psmouse->pktcnt - 1];
-	int newabs = SYN_MODEL_NEWABS(priv->model_id);
 
 	input_regs(dev, regs);
 
-	switch (psmouse->pktcnt) {
-	case 1:
-		if (newabs ? ((data & 0xC8) != 0x80) : ((data & 0xC0) != 0xC0)) {
-			printk(KERN_WARNING "Synaptics driver lost sync at 1st byte\n");
-			goto bad_sync;
-		}
-		break;
-	case 2:
-		if (!newabs && ((data & 0x60) != 0x00)) {
-			printk(KERN_WARNING "Synaptics driver lost sync at 2nd byte\n");
-			goto bad_sync;
-		}
-		break;
-	case 4:
-		if (newabs ? ((data & 0xC8) != 0xC0) : ((data & 0xC0) != 0x80)) {
-			printk(KERN_WARNING "Synaptics driver lost sync at 4th byte\n");
-			goto bad_sync;
-		}
-		break;
-	case 5:
-		if (!newabs && ((data & 0x60) != 0x00)) {
-			printk(KERN_WARNING "Synaptics driver lost sync at 5th byte\n");
-			goto bad_sync;
-		}
-		break;
-	default:
-		if (psmouse->pktcnt < 6)
-			break;		    /* Wait for full packet */
-
+	if (psmouse->pktcnt >= 6) { /* Full packet received */
 		if (priv->out_of_sync) {
 			priv->out_of_sync = 0;
 			printk(KERN_NOTICE "Synaptics driver resynced.\n");
 		}
 
-		if (priv->ptport && synaptics_is_pt_packet(psmouse->packet))
-			synaptics_pass_pt_packet(priv->ptport, psmouse->packet);
+		if (psmouse->ptport && psmouse->ptport->serio.dev && synaptics_is_pt_packet(psmouse->packet))
+			synaptics_pass_pt_packet(&psmouse->ptport->serio, psmouse->packet);
 		else
 			synaptics_process_packet(psmouse);
-
 		psmouse->pktcnt = 0;
-		break;
-	}
-	return;
 
- bad_sync:
-	priv->out_of_sync++;
+	} else if (psmouse->pktcnt && !synaptics_validate_byte(psmouse)) {
+		printk(KERN_WARNING "Synaptics driver lost sync at byte %d\n", psmouse->pktcnt);
 		psmouse->pktcnt = 0;
-	if (psmouse_resetafter > 0 && priv->out_of_sync	== psmouse_resetafter) {
+		if (++priv->out_of_sync == psmouse_resetafter) {
 			psmouse->state = PSMOUSE_IGNORE;
-		serio_rescan(psmouse->serio);
+			printk(KERN_NOTICE "synaptics: issuing reconnect request\n");
+			serio_reconnect(psmouse->serio);
+		}
 	}
 }

drivers/input/mouse/synaptics.h

@@ -9,11 +9,9 @@
 #ifndef _SYNAPTICS_H
 #define _SYNAPTICS_H
 
-
 extern void synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs);
+extern int synaptics_detect(struct psmouse *psmouse);
 extern int synaptics_init(struct psmouse *psmouse);
-extern int synaptics_pt_init(struct psmouse *psmouse);
-extern void synaptics_disconnect(struct psmouse *psmouse);
 
 /* synaptics queries */
 #define SYN_QUE_IDENTIFY		0x00
@@ -105,8 +103,6 @@ struct synaptics_data {
 	/* Data for normal processing */
 	unsigned int out_of_sync;		/* # of packets out of sync */
 	int old_w;				/* Previous w value */
-	
-	struct serio *ptport;			/* pass-through port */
 };
 
 #endif /* _SYNAPTICS_H */

drivers/input/serio/serio.c

@@ -49,14 +49,17 @@ MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(serio_interrupt);
 EXPORT_SYMBOL(serio_register_port);
-EXPORT_SYMBOL(serio_register_slave_port);
+EXPORT_SYMBOL(serio_register_port_delayed);
+EXPORT_SYMBOL(__serio_register_port);
 EXPORT_SYMBOL(serio_unregister_port);
-EXPORT_SYMBOL(serio_unregister_slave_port);
+EXPORT_SYMBOL(serio_unregister_port_delayed);
+EXPORT_SYMBOL(__serio_unregister_port);
 EXPORT_SYMBOL(serio_register_device);
 EXPORT_SYMBOL(serio_unregister_device);
 EXPORT_SYMBOL(serio_open);
 EXPORT_SYMBOL(serio_close);
 EXPORT_SYMBOL(serio_rescan);
+EXPORT_SYMBOL(serio_reconnect);
 
 struct serio_event {
 	int type;
@@ -83,10 +86,22 @@ static void serio_find_dev(struct serio *serio)
 }
 
 #define SERIO_RESCAN		1
+#define SERIO_RECONNECT		2
+#define SERIO_REGISTER_PORT	3
+#define SERIO_UNREGISTER_PORT	4
 
 static DECLARE_WAIT_QUEUE_HEAD(serio_wait);
 static DECLARE_COMPLETION(serio_exited);
 
+static void serio_invalidate_pending_events(struct serio *serio)
+{
+	struct serio_event *event;
+
+	list_for_each_entry(event, &serio_event_list, node)
+		if (event->serio == serio)
+			event->serio = NULL;
+}
+
 void serio_handle_events(void)
 {
 	struct list_head *node, *next;
@@ -95,17 +110,35 @@ void serio_handle_events(void)
 	list_for_each_safe(node, next, &serio_event_list) {
 		event = container_of(node, struct serio_event, node);	
 
+		down(&serio_sem);
+		if (event->serio == NULL)
+			goto event_done;
+
 		switch (event->type) {
+			case SERIO_REGISTER_PORT :
+				__serio_register_port(event->serio);
+				break;
+
+			case SERIO_UNREGISTER_PORT :
+				__serio_unregister_port(event->serio);
+				break;
+
+			case SERIO_RECONNECT :
+				if (event->serio->dev && event->serio->dev->reconnect)
+					if (event->serio->dev->reconnect(event->serio) == 0)
+						break;
+				/* reconnect failed - fall through to rescan */
+
 			case SERIO_RESCAN :
-				down(&serio_sem);
 				if (event->serio->dev && event->serio->dev->disconnect)
 					event->serio->dev->disconnect(event->serio);
 				serio_find_dev(event->serio);
-				up(&serio_sem);
 				break;
 			default:
 				break;
 		}
+event_done:
+		up(&serio_sem);
 		list_del_init(node);
 		kfree(event);
 	}
@@ -130,18 +163,27 @@ static int serio_thread(void *nothing)
 	complete_and_exit(&serio_exited, 0);
 }
 
-void serio_rescan(struct serio *serio)
+static void serio_queue_event(struct serio *serio, int event_type)
 {
 	struct serio_event *event;
 
-	if (!(event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC)))
-		return;
-
-	event->type = SERIO_RESCAN;
+	if ((event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC))) {
+		event->type = event_type;
 		event->serio = serio;
 
 		list_add_tail(&event->node, &serio_event_list);
 		wake_up(&serio_wait);
+	}
+}
+
+void serio_rescan(struct serio *serio)
+{
+	serio_queue_event(serio, SERIO_RESCAN);
+}
+
+void serio_reconnect(struct serio *serio)
+{
+	serio_queue_event(serio, SERIO_RECONNECT);
 }
 
 irqreturn_t serio_interrupt(struct serio *serio,
@@ -163,17 +205,26 @@ irqreturn_t serio_interrupt(struct serio *serio,
 void serio_register_port(struct serio *serio)
 {
 	down(&serio_sem);
-	list_add_tail(&serio->node, &serio_list);
-	serio_find_dev(serio);
+	__serio_register_port(serio);
 	up(&serio_sem);
 }
 
 /*
- * Same as serio_register_port but does not try to acquire serio_sem.
- * Should be used when registering a serio from other input device's
+ * Submits register request to kseriod for subsequent execution.
+ * Can be used when it is not obvious whether the serio_sem is
+ * taken or not and when delayed execution is feasible.
+ */
+void serio_register_port_delayed(struct serio *serio)
+{
+	serio_queue_event(serio, SERIO_REGISTER_PORT);
+}
+
+/*
+ * Should only be called directly if serio_sem has already been taken,
+ * for example when unregistering a serio from other input device's
  * connect() function.
  */
-void serio_register_slave_port(struct serio *serio)
+void __serio_register_port(struct serio *serio)
 {
 	list_add_tail(&serio->node, &serio_list);
 	serio_find_dev(serio);
@@ -182,19 +233,28 @@ void serio_register_slave_port(struct serio *serio)
 void serio_unregister_port(struct serio *serio)
 {
 	down(&serio_sem);
-	list_del_init(&serio->node);
-	if (serio->dev && serio->dev->disconnect)
-		serio->dev->disconnect(serio);
+	__serio_unregister_port(serio);
 	up(&serio_sem);
 }
 
 /*
- * Same as serio_unregister_port but does not try to acquire serio_sem.
- * Should be used when unregistering a serio from other input device's
+ * Submits unregister request to kseriod for subsequent execution.
+ * Can be used when it is not obvious whether the serio_sem is
+ * taken or not and when delayed execution is feasible.
+ */
+void serio_unregister_port_delayed(struct serio *serio)
+{
+	serio_queue_event(serio, SERIO_UNREGISTER_PORT);
+}
+
+/*
+ * Should only be called directly if serio_sem has already been taken,
+ * for example when unregistering a serio from other input device's
  * disconnect() function.
  */
-void serio_unregister_slave_port(struct serio *serio)
+void __serio_unregister_port(struct serio *serio)
 {
+	serio_invalidate_pending_events(serio);
 	list_del_init(&serio->node);
 	if (serio->dev && serio->dev->disconnect)
 		serio->dev->disconnect(serio);

drivers/scsi/qla1280.c

@@ -16,9 +16,13 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.23.37"
+#define QLA1280_VERSION      "3.23.37.1"
 /*****************************************************************************
     Revision History:
+    Rev  3.23.37.1 December 17, 2003, Jes Sorensen
+	- Delete completion queue from srb if mailbox command failed to
+	  to avoid qla1280_done completeting qla1280_error_action's
+	  obsolete context
     Rev  3.23.37 October 1, 2003, Jes Sorensen
 	- Make MMIO depend on CONFIG_X86_VISWS instead of yet another
 	  random CONFIG option
@@ -1464,8 +1468,15 @@ qla1280_error_action(Scsi_Cmnd * cmd, enum action action)
 	/* If we didn't manage to issue the action, or we have no
 	 * command to wait for, exit here */
 	if (result == FAILED || handle == NULL ||
-	    handle == (unsigned char *)INVALID_HANDLE)
+	    handle == (unsigned char *)INVALID_HANDLE) {
+		/*
+		 * Clear completion queue to avoid qla1280_done() trying
+		 * to complete the command at a later stage after we
+		 * have exited the current context
+		 */
+		sp->wait = NULL;
 		goto leave;
+	}
 
 	/* set up a timer just in case we're really jammed */
 	init_timer(&timer);

drivers/usb/core/devio.c

@@ -261,7 +261,6 @@ static void async_completed(struct urb *urb, struct pt_regs *regs)
         spin_lock(&ps->lock);
         list_move_tail(&as->asynclist, &ps->async_completed);
         spin_unlock(&ps->lock);
-        wake_up(&ps->wait);
 	if (as->signr) {
 		sinfo.si_signo = as->signr;
 		sinfo.si_errno = as->urb->status;
@@ -269,6 +268,7 @@ static void async_completed(struct urb *urb, struct pt_regs *regs)
 		sinfo.si_addr = (void *)as->userurb;
 		send_sig_info(as->signr, &sinfo, as->task);
 	}
+        wake_up(&ps->wait);
 }
 
 static void destroy_async (struct dev_state *ps, struct list_head *list)

drivers/usb/core/hub.c

@@ -692,6 +692,9 @@ static int hub_port_status(struct usb_device *dev, int port,
 	struct usb_hub *hub = usb_get_intfdata(dev->actconfig->interface[0]);
 	int ret;
 
+	if (!hub)
+		return -ENODEV;
+
 	ret = get_port_status(dev, port + 1, &hub->status->port);
 	if (ret < 0)
 		dev_err (hubdev (dev),
@@ -926,7 +929,6 @@ static void hub_port_connect_change(struct usb_hub *hubstate, int port,
 			break;
 		}
 
-		hub->children[port] = dev;
 		dev->state = USB_STATE_POWERED;
 
 		/* Reset the device, and detect its speed */
@@ -979,8 +981,10 @@ static void hub_port_connect_change(struct usb_hub *hubstate, int port,
 		dev->dev.parent = dev->parent->dev.parent->parent;
 
 		/* Run it through the hoops (find a driver, etc) */
-		if (!usb_new_device(dev, &hub->dev))
+		if (!usb_new_device(dev, &hub->dev)) {
+			hub->children[port] = dev;
 			goto done;
+		}
 
 		/* Free the configuration if there was an error */
 		usb_put_dev(dev);
@@ -989,7 +993,6 @@ static void hub_port_connect_change(struct usb_hub *hubstate, int port,
 		delay = HUB_LONG_RESET_TIME;
 	}
 
-	hub->children[port] = NULL;
 	hub_port_disable(hub, port);
 done:
 	up(&usb_address0_sem);
@@ -1342,6 +1345,7 @@ int usb_physical_reset_device(struct usb_device *dev)
 			dev->devpath, ret);
 		return ret;
 	}
+	dev->state = USB_STATE_CONFIGURED;
 
 	for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
 		struct usb_interface *intf = dev->actconfig->interface[i];

drivers/usb/core/usb.c

@@ -1120,6 +1120,7 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
 	if (err) {
 		dev_err(&dev->dev, "can't set config #%d, error %d\n",
 			dev->config[0].desc.bConfigurationValue, err);
+		device_del(&dev->dev);
 		goto fail;
 	}
 

drivers/usb/host/uhci-hcd.c

@@ -2182,6 +2182,9 @@ static int uhci_reset(struct usb_hcd *hcd)
 
 	uhci->io_addr = (unsigned long) hcd->regs;
 
+	/* Turn off all interrupts */
+	outw(0, uhci->io_addr + USBINTR);
+
 	/* Maybe kick BIOS off this hardware.  Then reset, so we won't get
 	 * interrupts from any previous setup.
 	 */

drivers/usb/image/Kconfig

@@ -18,13 +18,15 @@ config USB_MDC800
 	  module will be called mdc800.
 
 config USB_SCANNER
-	tristate "USB Scanner support"
+	tristate "USB Scanner support (OBSOLETE)"
 	depends on USB
 	help
 	  Say Y here if you want to connect a USB scanner to your computer's
 	  USB port. Please read <file:Documentation/usb/scanner.txt> for more
 	  information.
 
+	  This driver has been obsoleted by support via libusb.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called scanner.
 

drivers/usb/misc/auerswald.c

@@ -324,7 +324,7 @@ static void auerchain_complete (struct urb * urb, struct pt_regs *regs)
                 urb    = acep->urbp;
                 dbg ("auerchain_complete: submitting next urb from chain");
 		urb->status = 0;	/* needed! */
-		result = usb_submit_urb(urb, GFP_KERNEL);
+		result = usb_submit_urb(urb, GFP_ATOMIC);
 
                 /* check for submit errors */
                 if (result) {
@@ -402,7 +402,7 @@ static int auerchain_submit_urb_list (pauerchain_t acp, struct urb * urb, int ea
         if (acep) {
                 dbg("submitting urb immediate");
 		urb->status = 0;	/* needed! */
-                result = usb_submit_urb(urb, GFP_KERNEL);
+                result = usb_submit_urb(urb, GFP_ATOMIC);
                 /* check for submit errors */
                 if (result) {
                         urb->status = result;

drivers/usb/serial/usb-serial.c

@@ -493,12 +493,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 	return retval;
 }
 
-static void __serial_close(struct usb_serial_port *port, struct file *filp)
+static void serial_close(struct tty_struct *tty, struct file * filp)
 {
-	if (!port->open_count) {
-		dbg ("%s - port not opened", __FUNCTION__);
+	struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
+	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
+
+	if (!serial)
 		return;
-	}
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
 
 	--port->open_count;
 	if (port->open_count <= 0) {
@@ -506,30 +509,18 @@ static void __serial_close(struct usb_serial_port *port, struct file *filp)
 		 * port is being closed by the last owner */
 		port->serial->type->close(port, filp);
 		port->open_count = 0;
+
+		if (port->tty) {
+			if (port->tty->driver_data)
+				port->tty->driver_data = NULL;
+			port->tty = NULL;
+		}
 	}
 
 	module_put(port->serial->type->owner);
 	kobject_put(&port->serial->kobj);
 }
 
-static void serial_close(struct tty_struct *tty, struct file * filp)
-{
-	struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
-	struct usb_serial *serial = get_usb_serial (port, __FUNCTION__);
-
-	if (!serial)
-		return;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	/* if disconnect beat us to the punch here, there's nothing to do */
-	if (tty && tty->driver_data) {
-		__serial_close(port, filp);
-		tty->driver_data = NULL;
-	}
-	port->tty = NULL;
-}
-
 static int serial_write (struct tty_struct * tty, int from_user, const unsigned char *buf, int count)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *) tty->driver_data;
@@ -848,19 +839,6 @@ static void destroy_serial (struct kobject *kobj)
 	dbg ("%s - %s", __FUNCTION__, kobj->name);
 
 	serial = to_usb_serial(kobj);
-
-	/* fail all future close/read/write/ioctl/etc calls */
-	for (i = 0; i < serial->num_ports; ++i) {
-		port = serial->port[i];
-		if (port->tty != NULL) {
-			port->tty->driver_data = NULL;
-			while (port->open_count > 0) {
-				__serial_close(port, NULL);
-			}
-			port->tty = NULL;
-		}
-	}
-
 	serial_shutdown (serial);
 
 	/* return the minor range that this device had */
@@ -1242,7 +1220,7 @@ int usb_serial_probe(struct usb_interface *interface,
 	/* register all of the individual ports with the driver core */
 	for (i = 0; i < num_ports; ++i) {
 		port = serial->port[i];
-		port->dev.parent = &serial->dev->dev;
+		port->dev.parent = &interface->dev;
 		port->dev.driver = NULL;
 		port->dev.bus = &usb_serial_bus_type;
 		port->dev.release = &port_release;

drivers/usb/storage/datafab.c

@@ -387,7 +387,7 @@ static int datafab_id_device(struct us_data *us,
 
 	// we'll go ahead and extract the media capacity while we're here...
 	//
-	rc = datafab_bulk_read(us, reply, sizeof(reply));
+	rc = datafab_bulk_read(us, reply, 512);
 	if (rc == USB_STOR_XFER_GOOD) {
 		// capacity is at word offset 57-58
 		//

drivers/usb/storage/jumpshot.c

@@ -317,7 +317,7 @@ static int jumpshot_id_device(struct us_data *us,
 	}
 
 	// read the reply
-	rc = jumpshot_bulk_read(us, reply, sizeof(reply));
+	rc = jumpshot_bulk_read(us, reply, 512);
 	if (rc != USB_STOR_XFER_GOOD) {
 		rc = USB_STOR_TRANSPORT_ERROR;
 		goto leave;

include/asm-i386/irq.h

@@ -24,6 +24,7 @@ extern void disable_irq(unsigned int);
 extern void disable_irq_nosync(unsigned int);
 extern void enable_irq(unsigned int);
 extern void release_x86_irqs(struct task_struct *);
+extern int can_request_irq(unsigned int, unsigned long flags);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #define ARCH_HAS_NMI_WATCHDOG		/* See include/linux/nmi.h */

include/linux/input.h

@@ -870,6 +870,7 @@ struct input_handler {
 	char *name;
 
 	struct input_device_id *id_table;
+	struct input_device_id *blacklist;
 
 	struct list_head	h_list;
 	struct list_head	node;

include/linux/keyboard.h

@@ -2,7 +2,6 @@
 #define __LINUX_KEYBOARD_H
 
 #include <linux/wait.h>
-#include <linux/input.h>
 
 #define KG_SHIFT	0
 #define KG_CTRL		2
@@ -17,7 +16,7 @@
 
 #define NR_SHIFT	9
 
-#define NR_KEYS		(KEY_MAX+1)
+#define NR_KEYS		255
 #define MAX_NR_KEYMAPS	256
 /* This means 128Kb if all keymaps are allocated. Only the superuser
 	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */

include/linux/serio.h

@@ -49,6 +49,7 @@ struct serio_dev {
 	irqreturn_t (*interrupt)(struct serio *, unsigned char,
 			unsigned int, struct pt_regs *);
 	void (*connect)(struct serio *, struct serio_dev *dev);
+	int  (*reconnect)(struct serio *);
 	void (*disconnect)(struct serio *);
 	void (*cleanup)(struct serio *);
 
@@ -58,12 +59,15 @@ struct serio_dev {
 int serio_open(struct serio *serio, struct serio_dev *dev);
 void serio_close(struct serio *serio);
 void serio_rescan(struct serio *serio);
+void serio_reconnect(struct serio *serio);
 irqreturn_t serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags, struct pt_regs *regs);
 
 void serio_register_port(struct serio *serio);
-void serio_register_slave_port(struct serio *serio);
+void serio_register_port_delayed(struct serio *serio);
+void __serio_register_port(struct serio *serio);
 void serio_unregister_port(struct serio *serio);
-void serio_unregister_slave_port(struct serio *serio);
+void serio_unregister_port_delayed(struct serio *serio);
+void __serio_unregister_port(struct serio *serio);
 void serio_register_device(struct serio_dev *dev);
 void serio_unregister_device(struct serio_dev *dev);
 

kernel/sched.c

@@ -1470,6 +1470,7 @@ void scheduling_functions_start_here(void) { }
  */
 asmlinkage void schedule(void)
 {
+	long *switch_count;
 	task_t *prev, *next;
 	runqueue_t *rq;
 	prio_array_t *array;
@@ -1516,33 +1517,26 @@ asmlinkage void schedule(void)
 	 * if entering off of a kernel preemption go straight
 	 * to picking the next task.
 	 */
-	if (unlikely(preempt_count() & PREEMPT_ACTIVE))
-		goto pick_next_task;
-
-	switch (prev->state) {
-	case TASK_INTERRUPTIBLE:
-		if (unlikely(signal_pending(prev))) {
+	switch_count = &prev->nivcsw;
+	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
+		switch_count = &prev->nvcsw;
+		if (unlikely((prev->state & TASK_INTERRUPTIBLE) &&
+				unlikely(signal_pending(prev))))
 			prev->state = TASK_RUNNING;
-			break;
-		}
-	default:
+		else
 			deactivate_task(prev, rq);
-		prev->nvcsw++;
-		break;
-	case TASK_RUNNING:
-		prev->nivcsw++;
 	}
-pick_next_task:
+
 	if (unlikely(!rq->nr_running)) {
 #ifdef CONFIG_SMP
 		load_balance(rq, 1, cpu_to_node_mask(smp_processor_id()));
-		if (rq->nr_running)
-			goto pick_next_task;
 #endif
+		if (!rq->nr_running) {
 			next = rq->idle;
 			rq->expired_timestamp = 0;
 			goto switch_tasks;
 		}
+	}
 
 	array = rq->active;
 	if (unlikely(!array->nr_active)) {
@@ -1588,6 +1582,7 @@ asmlinkage void schedule(void)
 		next->timestamp = now;
 		rq->nr_switches++;
 		rq->curr = next;
+		++*switch_count;
 
 		prepare_arch_switch(rq, next);
 		prev = context_switch(rq, prev, next);

lib/kobject.c

@@ -236,8 +236,6 @@ static void unlink(struct kobject * kobj)
 		list_del_init(&kobj->entry);
 		up_write(&kobj->kset->subsys->rwsem);
 	}
-	if (kobj->parent) 
-		kobject_put(kobj->parent);
 	kobject_put(kobj);
 }
 
@@ -274,9 +272,11 @@ int kobject_add(struct kobject * kobj)
 	kobj->parent = parent;
 
 	error = create_dir(kobj);
-	if (error)
+	if (error) {
 		unlink(kobj);
-	else {
+		if (parent)
+			kobject_put(parent);
+	} else {
 		/* If this kobj does not belong to a kset,
 		   try to find a parent that does. */
 		top_kobj = kobj;
@@ -452,6 +452,7 @@ void kobject_cleanup(struct kobject * kobj)
 {
 	struct kobj_type * t = get_ktype(kobj);
 	struct kset * s = kobj->kset;
+	struct kobject * parent = kobj->parent;
 
 	pr_debug("kobject %s: cleaning up\n",kobject_name(kobj));
 	if (kobj->k_name != kobj->name)
@@ -461,6 +462,8 @@ void kobject_cleanup(struct kobject * kobj)
 		t->release(kobj);
 	if (s)
 		kset_put(s);
+	if (parent) 
+		kobject_put(parent);
 }
 
 /**

scripts/file2alias.c

@@ -52,6 +52,13 @@ static int do_usb_entry(const char *filename,
 	id->bcdDevice_lo = TO_NATIVE(id->bcdDevice_lo);
 	id->bcdDevice_hi = TO_NATIVE(id->bcdDevice_hi);
 
+	/*
+	 * Some modules (visor) have empty slots as placeholder for
+	 * run-time specification that results in catch-all alias
+	 */
+	if (!(id->idVendor | id->bDeviceClass | id->bInterfaceClass))
+		return 1;
+
 	strcpy(alias, "usb:");
 	ADD(alias, "v", id->match_flags&USB_DEVICE_ID_MATCH_VENDOR,
 	    id->idVendor);