Commit 8ae01f79 authored by Christophe Ricard's avatar Christophe Ricard Committed by Samuel Ortiz

NFC: st21nfcb: Add support for secure element

The st21nfcb chipset has 3 SWP (Single Wire Protocol) lines and
supports up to 3 secure elements (UICC/eSE and µSD in the future).

Some st21nfcb firmware does not support the nci command
nci_nfcee_mode_set(NCI_NFCEE_DISABLE). For this reason, we assume
2 secures elements are always present (UICC and eSE).
They will be added to the SE list once successfully activated and
they will be available only after running through enable_se
handler or when the poll in listen mode is started.

During initialization, the white_list will be always set assuming
both UICC & eSE are present.

On eSE activation, the ATR bytes are fetched to build the command
exchange timeout.

The se_io hook will allow to transfer data over SWP. 2 kind of
events may appear data is sent over:
- ST21NFCB_EVT_TRANSMIT_DATA when receiving an apdu answer
- ST21NFCB_EVT_WTX_REQUEST when the secure element needs more time
  than expected to process a command. If this timeout expires, we
  send a software reset, and then a hardware one if it still fails.
Signed-off-by: default avatarChristophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 11f54f22
......@@ -2,7 +2,7 @@
# Makefile for ST21NFCB NCI based NFC driver
#
st21nfcb_nci-objs = ndlc.o st21nfcb.o
st21nfcb_nci-objs = ndlc.o st21nfcb.o st21nfcb_se.o
obj-$(CONFIG_NFC_ST21NFCB) += st21nfcb_nci.o
st21nfcb_i2c-objs = i2c.o
......
......@@ -22,6 +22,7 @@
#include <net/nfc/nci_core.h>
#include "st21nfcb.h"
#include "st21nfcb_se.h"
#define DRIVER_DESC "NCI NFC driver for ST21NFCB"
......@@ -78,6 +79,13 @@ static struct nci_ops st21nfcb_nci_ops = {
.close = st21nfcb_nci_close,
.send = st21nfcb_nci_send,
.get_rfprotocol = st21nfcb_nci_get_rfprotocol,
.discover_se = st21nfcb_nci_discover_se,
.enable_se = st21nfcb_nci_enable_se,
.disable_se = st21nfcb_nci_disable_se,
.se_io = st21nfcb_nci_se_io,
.hci_load_session = st21nfcb_hci_load_session,
.hci_event_received = st21nfcb_hci_event_received,
.hci_cmd_received = st21nfcb_hci_cmd_received,
};
int st21nfcb_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
......@@ -114,9 +122,10 @@ int st21nfcb_nci_probe(struct llt_ndlc *ndlc, int phy_headroom,
if (r) {
pr_err("Cannot register nfc device to nci core\n");
nci_free_device(ndlc->ndev);
return r;
}
return r;
return st21nfcb_se_init(ndlc->ndev);
}
EXPORT_SYMBOL_GPL(st21nfcb_nci_probe);
......
......@@ -19,6 +19,7 @@
#ifndef __LOCAL_ST21NFCB_H_
#define __LOCAL_ST21NFCB_H_
#include "st21nfcb_se.h"
#include "ndlc.h"
/* Define private flags: */
......@@ -27,6 +28,7 @@
struct st21nfcb_nci_info {
struct llt_ndlc *ndlc;
unsigned long flags;
struct st21nfcb_se_info se_info;
};
void st21nfcb_nci_remove(struct nci_dev *ndev);
......
/*
* NCI based Driver for STMicroelectronics NFC Chip
*
* Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/nfc.h>
#include <linux/delay.h>
#include <net/nfc/nci.h>
#include <net/nfc/nci_core.h>
#include "st21nfcb.h"
#include "st21nfcb_se.h"
struct st21nfcb_pipe_info {
u8 pipe_state;
u8 src_host_id;
u8 src_gate_id;
u8 dst_host_id;
u8 dst_gate_id;
} __packed;
/* Hosts */
#define ST21NFCB_HOST_CONTROLLER_ID 0x00
#define ST21NFCB_TERMINAL_HOST_ID 0x01
#define ST21NFCB_UICC_HOST_ID 0x02
#define ST21NFCB_ESE_HOST_ID 0xc0
/* Gates */
#define ST21NFCB_DEVICE_MGNT_GATE 0x01
#define ST21NFCB_APDU_READER_GATE 0xf0
#define ST21NFCB_CONNECTIVITY_GATE 0x41
/* Pipes */
#define ST21NFCB_DEVICE_MGNT_PIPE 0x02
/* Connectivity pipe only */
#define ST21NFCB_SE_COUNT_PIPE_UICC 0x01
/* Connectivity + APDU Reader pipe */
#define ST21NFCB_SE_COUNT_PIPE_EMBEDDED 0x02
#define ST21NFCB_SE_TO_HOT_PLUG 1000 /* msecs */
#define ST21NFCB_SE_TO_PIPES 2000
#define ST21NFCB_EVT_HOT_PLUG_IS_INHIBITED(x) (x->data[0] & 0x80)
#define NCI_HCI_APDU_PARAM_ATR 0x01
#define NCI_HCI_ADMIN_PARAM_SESSION_IDENTITY 0x01
#define NCI_HCI_ADMIN_PARAM_WHITELIST 0x03
#define NCI_HCI_ADMIN_PARAM_HOST_LIST 0x04
#define ST21NFCB_EVT_SE_HARD_RESET 0x20
#define ST21NFCB_EVT_TRANSMIT_DATA 0x10
#define ST21NFCB_EVT_WTX_REQUEST 0x11
#define ST21NFCB_EVT_SE_SOFT_RESET 0x11
#define ST21NFCB_EVT_SE_END_OF_APDU_TRANSFER 0x21
#define ST21NFCB_EVT_HOT_PLUG 0x03
#define ST21NFCB_SE_MODE_OFF 0x00
#define ST21NFCB_SE_MODE_ON 0x01
#define ST21NFCB_EVT_CONNECTIVITY 0x10
#define ST21NFCB_EVT_TRANSACTION 0x12
#define ST21NFCB_DM_GETINFO 0x13
#define ST21NFCB_DM_GETINFO_PIPE_LIST 0x02
#define ST21NFCB_DM_GETINFO_PIPE_INFO 0x01
#define ST21NFCB_DM_PIPE_CREATED 0x02
#define ST21NFCB_DM_PIPE_OPEN 0x04
#define ST21NFCB_DM_RF_ACTIVE 0x80
#define ST21NFCB_DM_DISCONNECT 0x30
#define ST21NFCB_DM_IS_PIPE_OPEN(p) \
((p & 0x0f) == (ST21NFCB_DM_PIPE_CREATED | ST21NFCB_DM_PIPE_OPEN))
#define ST21NFCB_ATR_DEFAULT_BWI 0x04
/*
* WT = 2^BWI/10[s], convert into msecs and add a secure
* room by increasing by 2 this timeout
*/
#define ST21NFCB_BWI_TO_TIMEOUT(x) ((1 << x) * 200)
#define ST21NFCB_ATR_GET_Y_FROM_TD(x) (x >> 4)
/* If TA is present bit 0 is set */
#define ST21NFCB_ATR_TA_PRESENT(x) (x & 0x01)
/* If TB is present bit 1 is set */
#define ST21NFCB_ATR_TB_PRESENT(x) (x & 0x02)
#define ST21NFCB_NUM_DEVICES 256
static DECLARE_BITMAP(dev_mask, ST21NFCB_NUM_DEVICES);
/* Here are the mandatory pipe for st21nfcb */
static struct nci_hci_gate st21nfcb_gates[] = {
{NCI_HCI_ADMIN_GATE, NCI_HCI_ADMIN_PIPE,
ST21NFCB_HOST_CONTROLLER_ID},
{NCI_HCI_LINK_MGMT_GATE, NCI_HCI_LINK_MGMT_PIPE,
ST21NFCB_HOST_CONTROLLER_ID},
{ST21NFCB_DEVICE_MGNT_GATE, ST21NFCB_DEVICE_MGNT_PIPE,
ST21NFCB_HOST_CONTROLLER_ID},
/* Secure element pipes are created by secure element host */
{ST21NFCB_CONNECTIVITY_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
ST21NFCB_HOST_CONTROLLER_ID},
{ST21NFCB_APDU_READER_GATE, NCI_HCI_DO_NOT_OPEN_PIPE,
ST21NFCB_HOST_CONTROLLER_ID},
};
static u8 st21nfcb_se_get_bwi(struct nci_dev *ndev)
{
int i;
u8 td;
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
for (i = 1; i < ST21NFCB_ESE_MAX_LENGTH; i++) {
td = ST21NFCB_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
if (ST21NFCB_ATR_TA_PRESENT(td))
i++;
if (ST21NFCB_ATR_TB_PRESENT(td)) {
i++;
return info->se_info.atr[i] >> 4;
}
}
return ST21NFCB_ATR_DEFAULT_BWI;
}
static void st21nfcb_se_get_atr(struct nci_dev *ndev)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
int r;
struct sk_buff *skb;
r = nci_hci_get_param(ndev, ST21NFCB_APDU_READER_GATE,
NCI_HCI_APDU_PARAM_ATR, &skb);
if (r < 0)
return;
if (skb->len <= ST21NFCB_ESE_MAX_LENGTH) {
memcpy(info->se_info.atr, skb->data, skb->len);
info->se_info.wt_timeout =
ST21NFCB_BWI_TO_TIMEOUT(st21nfcb_se_get_bwi(ndev));
}
kfree_skb(skb);
}
int st21nfcb_hci_load_session(struct nci_dev *ndev)
{
int i, j, r;
struct sk_buff *skb_pipe_list, *skb_pipe_info;
struct st21nfcb_pipe_info *dm_pipe_info;
u8 pipe_list[] = { ST21NFCB_DM_GETINFO_PIPE_LIST,
ST21NFCB_TERMINAL_HOST_ID};
u8 pipe_info[] = { ST21NFCB_DM_GETINFO_PIPE_INFO,
ST21NFCB_TERMINAL_HOST_ID, 0};
/* On ST21NFCB device pipes number are dynamics
* If pipes are already created, hci_dev_up will fail.
* Doing a clear all pipe is a bad idea because:
* - It does useless EEPROM cycling
* - It might cause issue for secure elements support
* (such as removing connectivity or APDU reader pipe)
* A better approach on ST21NFCB is to:
* - get a pipe list for each host.
* (eg: ST21NFCB_HOST_CONTROLLER_ID for now).
* (TODO Later on UICC HOST and eSE HOST)
* - get pipe information
* - match retrieved pipe list in st21nfcb_gates
* ST21NFCB_DEVICE_MGNT_GATE is a proprietary gate
* with ST21NFCB_DEVICE_MGNT_PIPE.
* Pipe can be closed and need to be open.
*/
r = nci_hci_connect_gate(ndev, ST21NFCB_HOST_CONTROLLER_ID,
ST21NFCB_DEVICE_MGNT_GATE,
ST21NFCB_DEVICE_MGNT_PIPE);
if (r < 0)
goto free_info;
/* Get pipe list */
r = nci_hci_send_cmd(ndev, ST21NFCB_DEVICE_MGNT_GATE,
ST21NFCB_DM_GETINFO, pipe_list, sizeof(pipe_list),
&skb_pipe_list);
if (r < 0)
goto free_info;
/* Complete the existing gate_pipe table */
for (i = 0; i < skb_pipe_list->len; i++) {
pipe_info[2] = skb_pipe_list->data[i];
r = nci_hci_send_cmd(ndev, ST21NFCB_DEVICE_MGNT_GATE,
ST21NFCB_DM_GETINFO, pipe_info,
sizeof(pipe_info), &skb_pipe_info);
if (r)
continue;
/*
* Match pipe ID and gate ID
* Output format from ST21NFC_DM_GETINFO is:
* - pipe state (1byte)
* - source hid (1byte)
* - source gid (1byte)
* - destination hid (1byte)
* - destination gid (1byte)
*/
dm_pipe_info = (struct st21nfcb_pipe_info *)skb_pipe_info->data;
if (dm_pipe_info->dst_gate_id == ST21NFCB_APDU_READER_GATE &&
dm_pipe_info->src_host_id != ST21NFCB_ESE_HOST_ID) {
pr_err("Unexpected apdu_reader pipe on host %x\n",
dm_pipe_info->src_host_id);
continue;
}
for (j = 0; (j < ARRAY_SIZE(st21nfcb_gates)) &&
(st21nfcb_gates[j].gate != dm_pipe_info->dst_gate_id); j++)
;
if (j < ARRAY_SIZE(st21nfcb_gates) &&
st21nfcb_gates[j].gate == dm_pipe_info->dst_gate_id &&
ST21NFCB_DM_IS_PIPE_OPEN(dm_pipe_info->pipe_state)) {
st21nfcb_gates[j].pipe = pipe_info[2];
ndev->hci_dev->gate2pipe[st21nfcb_gates[j].gate] =
st21nfcb_gates[j].pipe;
ndev->hci_dev->pipes[st21nfcb_gates[j].pipe].gate =
st21nfcb_gates[j].gate;
ndev->hci_dev->pipes[st21nfcb_gates[j].pipe].host =
dm_pipe_info->src_host_id;
}
}
memcpy(ndev->hci_dev->init_data.gates, st21nfcb_gates,
sizeof(st21nfcb_gates));
free_info:
kfree_skb(skb_pipe_info);
kfree_skb(skb_pipe_list);
return r;
}
EXPORT_SYMBOL_GPL(st21nfcb_hci_load_session);
static void st21nfcb_hci_admin_event_received(struct nci_dev *ndev,
u8 event, struct sk_buff *skb)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
switch (event) {
case ST21NFCB_EVT_HOT_PLUG:
if (info->se_info.se_active) {
if (!ST21NFCB_EVT_HOT_PLUG_IS_INHIBITED(skb)) {
del_timer_sync(&info->se_info.se_active_timer);
info->se_info.se_active = false;
complete(&info->se_info.req_completion);
} else {
mod_timer(&info->se_info.se_active_timer,
jiffies +
msecs_to_jiffies(ST21NFCB_SE_TO_PIPES));
}
}
break;
}
}
static int st21nfcb_hci_apdu_reader_event_received(struct nci_dev *ndev,
u8 event,
struct sk_buff *skb)
{
int r = 0;
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
pr_debug("apdu reader gate event: %x\n", event);
switch (event) {
case ST21NFCB_EVT_TRANSMIT_DATA:
del_timer_sync(&info->se_info.bwi_timer);
info->se_info.bwi_active = false;
info->se_info.cb(info->se_info.cb_context,
skb->data, skb->len, 0);
break;
case ST21NFCB_EVT_WTX_REQUEST:
mod_timer(&info->se_info.bwi_timer, jiffies +
msecs_to_jiffies(info->se_info.wt_timeout));
break;
}
kfree_skb(skb);
return r;
}
/*
* Returns:
* <= 0: driver handled the event, skb consumed
* 1: driver does not handle the event, please do standard processing
*/
static int st21nfcb_hci_connectivity_event_received(struct nci_dev *ndev,
u8 host, u8 event,
struct sk_buff *skb)
{
int r = 0;
pr_debug("connectivity gate event: %x\n", event);
switch (event) {
case ST21NFCB_EVT_CONNECTIVITY:
break;
case ST21NFCB_EVT_TRANSACTION:
break;
default:
return 1;
}
kfree_skb(skb);
return r;
}
void st21nfcb_hci_event_received(struct nci_dev *ndev, u8 pipe,
u8 event, struct sk_buff *skb)
{
u8 gate = ndev->hci_dev->pipes[pipe].gate;
u8 host = ndev->hci_dev->pipes[pipe].host;
switch (gate) {
case NCI_HCI_ADMIN_GATE:
st21nfcb_hci_admin_event_received(ndev, event, skb);
break;
case ST21NFCB_APDU_READER_GATE:
st21nfcb_hci_apdu_reader_event_received(ndev, event, skb);
break;
case ST21NFCB_CONNECTIVITY_GATE:
st21nfcb_hci_connectivity_event_received(ndev, host, event,
skb);
break;
}
}
EXPORT_SYMBOL_GPL(st21nfcb_hci_event_received);
void st21nfcb_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
struct sk_buff *skb)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
u8 gate = ndev->hci_dev->pipes[pipe].gate;
pr_debug("cmd: %x\n", cmd);
switch (cmd) {
case NCI_HCI_ANY_OPEN_PIPE:
if (gate != ST21NFCB_APDU_READER_GATE &&
ndev->hci_dev->pipes[pipe].host != ST21NFCB_UICC_HOST_ID)
ndev->hci_dev->count_pipes++;
if (ndev->hci_dev->count_pipes ==
ndev->hci_dev->expected_pipes) {
del_timer_sync(&info->se_info.se_active_timer);
info->se_info.se_active = false;
ndev->hci_dev->count_pipes = 0;
complete(&info->se_info.req_completion);
}
break;
}
}
EXPORT_SYMBOL_GPL(st21nfcb_hci_cmd_received);
/*
* Remarks: On some early st21nfcb firmware, nci_nfcee_mode_set(0)
* is rejected
*/
static int st21nfcb_nci_control_se(struct nci_dev *ndev, u8 se_idx,
u8 state)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
int r;
struct sk_buff *sk_host_list;
u8 host_id;
switch (se_idx) {
case ST21NFCB_UICC_HOST_ID:
ndev->hci_dev->count_pipes = 0;
ndev->hci_dev->expected_pipes = ST21NFCB_SE_COUNT_PIPE_UICC;
break;
case ST21NFCB_ESE_HOST_ID:
ndev->hci_dev->count_pipes = 0;
ndev->hci_dev->expected_pipes = ST21NFCB_SE_COUNT_PIPE_EMBEDDED;
break;
default:
return -EINVAL;
}
/*
* Wait for an EVT_HOT_PLUG in order to
* retrieve a relevant host list.
*/
reinit_completion(&info->se_info.req_completion);
r = nci_nfcee_mode_set(ndev, se_idx, NCI_NFCEE_ENABLE);
if (r != NCI_STATUS_OK)
return r;
mod_timer(&info->se_info.se_active_timer, jiffies +
msecs_to_jiffies(ST21NFCB_SE_TO_HOT_PLUG));
info->se_info.se_active = true;
/* Ignore return value and check in any case the host_list */
wait_for_completion_interruptible(&info->se_info.req_completion);
/* There might be some "collision" after receiving a HOT_PLUG event
* This may cause the CLF to not answer to the next hci command.
* There is no possible synchronization to prevent this.
* Adding a small delay is the only way to solve the issue.
*/
usleep_range(3000, 5000);
r = nci_hci_get_param(ndev, NCI_HCI_ADMIN_GATE,
NCI_HCI_ADMIN_PARAM_HOST_LIST, &sk_host_list);
if (r != NCI_HCI_ANY_OK)
return r;
host_id = sk_host_list->data[sk_host_list->len - 1];
kfree_skb(sk_host_list);
if (state == ST21NFCB_SE_MODE_ON && host_id == se_idx)
return se_idx;
else if (state == ST21NFCB_SE_MODE_OFF && host_id != se_idx)
return se_idx;
return -1;
}
int st21nfcb_nci_disable_se(struct nci_dev *ndev, u32 se_idx)
{
int r;
pr_debug("st21nfcb_nci_disable_se\n");
if (se_idx == NFC_SE_EMBEDDED) {
r = nci_hci_send_event(ndev, ST21NFCB_APDU_READER_GATE,
ST21NFCB_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0);
if (r < 0)
return r;
}
return 0;
}
EXPORT_SYMBOL_GPL(st21nfcb_nci_disable_se);
int st21nfcb_nci_enable_se(struct nci_dev *ndev, u32 se_idx)
{
int r;
pr_debug("st21nfcb_nci_enable_se\n");
if (se_idx == ST21NFCB_HCI_HOST_ID_ESE) {
r = nci_hci_send_event(ndev, ST21NFCB_APDU_READER_GATE,
ST21NFCB_EVT_SE_SOFT_RESET, NULL, 0);
if (r < 0)
return r;
}
return 0;
}
EXPORT_SYMBOL_GPL(st21nfcb_nci_enable_se);
static int st21nfcb_hci_network_init(struct nci_dev *ndev)
{
struct core_conn_create_dest_spec_params dest_params;
struct nci_conn_info *conn_info;
int r, dev_num;
r = nci_nfcee_discover(ndev, NCI_NFCEE_DISCOVERY_ACTION_ENABLE);
if (r != NCI_STATUS_OK)
goto exit;
dest_params.type = NCI_DESTINATION_SPECIFIC_PARAM_NFCEE_TYPE;
dest_params.length = sizeof(struct dest_spec_params);
dest_params.value.id = ndev->hci_dev->conn_info->id;
dest_params.value.protocol = NCI_NFCEE_INTERFACE_HCI_ACCESS;
r = nci_core_conn_create(ndev, &dest_params);
if (r != NCI_STATUS_OK)
goto exit;
conn_info = ndev->hci_dev->conn_info;
if (!conn_info)
goto exit;
memcpy(ndev->hci_dev->init_data.gates, st21nfcb_gates,
sizeof(st21nfcb_gates));
/*
* Session id must include the driver name + i2c bus addr
* persistent info to discriminate 2 identical chips
*/
dev_num = find_first_zero_bit(dev_mask, ST21NFCB_NUM_DEVICES);
if (dev_num >= ST21NFCB_NUM_DEVICES)
return -ENODEV;
scnprintf(ndev->hci_dev->init_data.session_id,
sizeof(ndev->hci_dev->init_data.session_id),
"%s%2x", "ST21BH", dev_num);
r = nci_hci_dev_session_init(ndev);
if (r != NCI_HCI_ANY_OK)
goto exit;
r = nci_nfcee_mode_set(ndev, ndev->hci_dev->conn_info->id,
NCI_NFCEE_ENABLE);
if (r != NCI_STATUS_OK)
goto exit;
return 0;
exit:
return r;
}
int st21nfcb_nci_discover_se(struct nci_dev *ndev)
{
u8 param[2];
int r;
int se_count = 0;
pr_debug("st21nfcb_nci_discover_se\n");
r = st21nfcb_hci_network_init(ndev);
if (r != 0)
return r;
param[0] = ST21NFCB_UICC_HOST_ID;
param[1] = ST21NFCB_HCI_HOST_ID_ESE;
r = nci_hci_set_param(ndev, NCI_HCI_ADMIN_GATE,
NCI_HCI_ADMIN_PARAM_WHITELIST,
param, sizeof(param));
if (r != NCI_HCI_ANY_OK)
return r;
r = st21nfcb_nci_control_se(ndev, ST21NFCB_UICC_HOST_ID,
ST21NFCB_SE_MODE_ON);
if (r == ST21NFCB_UICC_HOST_ID) {
nfc_add_se(ndev->nfc_dev, ST21NFCB_UICC_HOST_ID, NFC_SE_UICC);
se_count++;
}
/* Try to enable eSE in order to check availability */
r = st21nfcb_nci_control_se(ndev, ST21NFCB_HCI_HOST_ID_ESE,
ST21NFCB_SE_MODE_ON);
if (r == ST21NFCB_HCI_HOST_ID_ESE) {
nfc_add_se(ndev->nfc_dev, ST21NFCB_HCI_HOST_ID_ESE,
NFC_SE_EMBEDDED);
se_count++;
st21nfcb_se_get_atr(ndev);
}
return !se_count;
}
EXPORT_SYMBOL_GPL(st21nfcb_nci_discover_se);
int st21nfcb_nci_se_io(struct nci_dev *ndev, u32 se_idx,
u8 *apdu, size_t apdu_length,
se_io_cb_t cb, void *cb_context)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
pr_debug("\n");
switch (se_idx) {
case ST21NFCB_HCI_HOST_ID_ESE:
info->se_info.cb = cb;
info->se_info.cb_context = cb_context;
mod_timer(&info->se_info.bwi_timer, jiffies +
msecs_to_jiffies(info->se_info.wt_timeout));
info->se_info.bwi_active = true;
return nci_hci_send_event(ndev, ST21NFCB_APDU_READER_GATE,
ST21NFCB_EVT_TRANSMIT_DATA, apdu,
apdu_length);
default:
return -ENODEV;
}
}
EXPORT_SYMBOL(st21nfcb_nci_se_io);
static void st21nfcb_se_wt_timeout(unsigned long data)
{
/*
* No answer from the secure element
* within the defined timeout.
* Let's send a reset request as recovery procedure.
* According to the situation, we first try to send a software reset
* to the secure element. If the next command is still not
* answering in time, we send to the CLF a secure element hardware
* reset request.
*/
/* hardware reset managed through VCC_UICC_OUT power supply */
u8 param = 0x01;
struct st21nfcb_nci_info *info = (struct st21nfcb_nci_info *) data;
pr_debug("\n");
info->se_info.bwi_active = false;
if (!info->se_info.xch_error) {
info->se_info.xch_error = true;
nci_hci_send_event(info->ndlc->ndev, ST21NFCB_APDU_READER_GATE,
ST21NFCB_EVT_SE_SOFT_RESET, NULL, 0);
} else {
info->se_info.xch_error = false;
nci_hci_send_event(info->ndlc->ndev, ST21NFCB_DEVICE_MGNT_GATE,
ST21NFCB_EVT_SE_HARD_RESET, &param, 1);
}
info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
}
static void st21nfcb_se_activation_timeout(unsigned long data)
{
struct st21nfcb_nci_info *info = (struct st21nfcb_nci_info *) data;
pr_debug("\n");
info->se_info.se_active = false;
complete(&info->se_info.req_completion);
}
int st21nfcb_se_init(struct nci_dev *ndev)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
init_completion(&info->se_info.req_completion);
/* initialize timers */
init_timer(&info->se_info.bwi_timer);
info->se_info.bwi_timer.data = (unsigned long)info;
info->se_info.bwi_timer.function = st21nfcb_se_wt_timeout;
info->se_info.bwi_active = false;
init_timer(&info->se_info.se_active_timer);
info->se_info.se_active_timer.data = (unsigned long)info;
info->se_info.se_active_timer.function =
st21nfcb_se_activation_timeout;
info->se_info.se_active = false;
info->se_info.xch_error = false;
info->se_info.wt_timeout =
ST21NFCB_BWI_TO_TIMEOUT(ST21NFCB_ATR_DEFAULT_BWI);
return 0;
}
EXPORT_SYMBOL(st21nfcb_se_init);
void st21nfcb_se_deinit(struct nci_dev *ndev)
{
struct st21nfcb_nci_info *info = nci_get_drvdata(ndev);
if (info->se_info.bwi_active)
del_timer_sync(&info->se_info.bwi_timer);
if (info->se_info.se_active)
del_timer_sync(&info->se_info.se_active_timer);
info->se_info.se_active = false;
info->se_info.bwi_active = false;
}
EXPORT_SYMBOL(st21nfcb_se_deinit);
/*
* NCI based Driver for STMicroelectronics NFC Chip
*
* Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __LOCAL_ST21NFCB_SE_H_
#define __LOCAL_ST21NFCB_SE_H_
/*
* ref ISO7816-3 chap 8.1. the initial character TS is followed by a
* sequence of at most 32 characters.
*/
#define ST21NFCB_ESE_MAX_LENGTH 33
#define ST21NFCB_HCI_HOST_ID_ESE 0xc0
struct st21nfcb_se_info {
u8 atr[ST21NFCB_ESE_MAX_LENGTH];
struct completion req_completion;
struct timer_list bwi_timer;
int wt_timeout; /* in msecs */
bool bwi_active;
struct timer_list se_active_timer;
bool se_active;
bool xch_error;
se_io_cb_t cb;
void *cb_context;
};
int st21nfcb_se_init(struct nci_dev *ndev);
void st21nfcb_se_deinit(struct nci_dev *ndev);
int st21nfcb_nci_discover_se(struct nci_dev *ndev);
int st21nfcb_nci_enable_se(struct nci_dev *ndev, u32 se_idx);
int st21nfcb_nci_disable_se(struct nci_dev *ndev, u32 se_idx);
int st21nfcb_nci_se_io(struct nci_dev *ndev, u32 se_idx,
u8 *apdu, size_t apdu_length,
se_io_cb_t cb, void *cb_context);
int st21nfcb_hci_load_session(struct nci_dev *ndev);
void st21nfcb_hci_event_received(struct nci_dev *ndev, u8 pipe,
u8 event, struct sk_buff *skb);
void st21nfcb_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd,
struct sk_buff *skb);
#endif /* __LOCAL_ST21NFCB_NCI_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment