[media] tm6000: add radio support to the driver

Changes:
  Add function tm6000_set_reg_mask for change some bits in regs. Very usefull, simplify some code with this function.
  Add control mute
  Add control volume
  Add control audio input MUX
  Add support radio

Radio works well. TV works too

Known bugs:
  The programm gnomeradio can't set freq for radio, it use old v4l API. Audio over USB works via arecord.
  The programm mplayer can set freq but no any audio
           mplayer -v -rawaudio rate=48000 radio://105.2/capture driver=v4l2:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:immediatemode=0
  When start watch TV very shortly after radio the kernel crashed hardly. Didn't stop all USB URBs, need some time for stop.

[mchehab@redhat.com: fix merge conflicts]
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/tm6000/tm6000-alsa.c

@@ -76,14 +76,11 @@ MODULE_PARM_DESC(debug, "enable debug messages");
 static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 {
 	struct tm6000_core *core = chip->core;
-	int val;
 
 	dprintk(1, "Starting audio DMA\n");
 
 	/* Enables audio */
-	val = tm6000_get_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x0);
-	val |= 0x20;
-	tm6000_set_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x40, 0x40);
 
 	tm6000_set_audio_bitrate(core, 48000);
 
@@ -98,13 +95,11 @@ static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip)
 static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip)
 {
 	struct tm6000_core *core = chip->core;
-	int val;
+
 	dprintk(1, "Stopping audio DMA\n");
 
-	/* Enables audio */
-	val = tm6000_get_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x0);
-	val &= ~0x20;
-	tm6000_set_reg(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
+	/* Disables audio */
+	tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0x00, 0x40);
 
 	tm6000_set_reg(core, TM6010_REQ08_R01_A_INIT, 0);
 

drivers/staging/tm6000/tm6000-cards.c

@@ -66,6 +66,8 @@ struct tm6000_board {
 	char            *name;
 
 	struct tm6000_capabilities caps;
+	enum            tm6000_inaudio aradio;
+	enum            tm6000_inaudio avideo;
 
 	enum		tm6000_devtype type;	/* variant of the chipset */
 	int             tuner_type;     /* type of the tuner */
@@ -230,6 +232,8 @@ struct tm6000_board tm6000_boards[] = {
 		.tuner_addr   = 0xc2 >> 1,
 		.demod_addr   = 0x1e >> 1,
 		.type         = TM6010,
+		.avideo       = TM6000_AIP_SIF1,
+		.aradio       = TM6000_AIP_LINE1,
 		.caps = {
 			.has_tuner    = 1,
 			.has_dvb      = 1,
@@ -248,6 +252,8 @@ struct tm6000_board tm6000_boards[] = {
 		.tuner_type   = TUNER_XC5000,
 		.tuner_addr   = 0xc2 >> 1,
 		.type         = TM6010,
+		.avideo       = TM6000_AIP_SIF1,
+		.aradio       = TM6000_AIP_LINE1,
 		.caps = {
 			.has_tuner    = 1,
 			.has_dvb      = 0,
@@ -693,13 +699,12 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 		struct xc5000_config ctl = {
 			.i2c_address = dev->tuner_addr,
 			.if_khz      = 4570,
-			.radio_input = XC5000_RADIO_FM1,
+			.radio_input = XC5000_RADIO_FM1_MONO,
 			};
 
 		xc5000_cfg.tuner = TUNER_XC5000;
 		xc5000_cfg.priv  = &ctl;
 
-
 		v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 				     &xc5000_cfg);
 		}
@@ -732,6 +737,8 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 
 	dev->caps = tm6000_boards[dev->model].caps;
 
+	dev->avideo = tm6000_boards[dev->model].avideo;
+	dev->aradio = tm6000_boards[dev->model].aradio;
 	/* initialize hardware */
 	rc = tm6000_init(dev);
 	if (rc < 0)

drivers/staging/tm6000/tm6000-core.c

@@ -116,6 +116,29 @@ int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 }
 EXPORT_SYMBOL_GPL(tm6000_get_reg);
 
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+						u16 index, u16 mask)
+{
+	int rc;
+	u8 buf[1];
+	u8 new_index;
+
+	rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req,
+					value, index, buf, 1);
+
+	if (rc < 0)
+		return rc;
+
+	new_index = (buf[0] & ~mask) | (index & mask);
+
+	if (new_index == index)
+		return 0;
+
+	return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,
+				      req, value, new_index, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(tm6000_set_reg_mask);
+
 int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index)
 {
 	int rc;
@@ -245,17 +268,12 @@ int tm6000_init_analog_mode(struct tm6000_core *dev)
 	struct v4l2_frequency f;
 
 	if (dev->dev_type == TM6010) {
-		int val;
-
 		/* Enable video */
-		val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, 0);
-		val |= 0x60;
-		tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF, val);
-		val = tm6000_get_reg(dev,
-			TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0);
-		val &= ~0x40;
-		tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, val);
 
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_VIDEO_IF,
+							0x60, 0x60);
+		tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE,
+							0x00, 0x40);
 		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc);
 
 	} else {
@@ -471,6 +489,14 @@ struct reg_init tm6010_init_tab[] = {
 	{ TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 },
 	{ TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 },
 	{ TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 },
+	{ TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00},
+	{ TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80},
+	{ TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a},
+	{ TM6010_REQ08_R0D_A_AMD_THRES, 0x40},
+	{ TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64},
+	{ TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20},
+	{ TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe},
+	{ TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01},
 	{ TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc },
 
 	{ TM6010_REQ07_R3F_RESET, 0x01 },
@@ -591,51 +617,213 @@ int tm6000_init(struct tm6000_core *dev)
 
 int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate)
 {
-	int val;
+	int val = 0;
+	u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+	u8 areg_0a = 0x91; /* SIF 48KHz */
+
+	switch (bitrate) {
+	case 48000:
+		areg_f0 = 0x60; /* ADC MCLK = 250 Fs */
+		areg_0a = 0x91; /* SIF 48KHz */
+		dev->audio_bitrate = bitrate;
+		break;
+	case 32000:
+		areg_f0 = 0x00; /* ADC MCLK = 375 Fs */
+		areg_0a = 0x90; /* SIF 32KHz */
+		dev->audio_bitrate = bitrate;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 
 	/* enable I2S, if we use sif or external I2S device */
 	if (dev->dev_type == TM6010) {
-		val = tm6000_get_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0);
-		if (val < 0)
-			return val;
-		val = (val & 0xf0) | 0x1; /* 48 kHz, not muted */
-		val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, val);
+		val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a);
 		if (val < 0)
 			return val;
-	}
 
-	/* different reg's to set audio bitrate */
-	if (dev->dev_type == TM6010) {
-		val = tm6000_get_reg(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
-			0x0);
+		val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+							areg_f0, 0xf0);
 		if (val < 0)
 			return val;
 	} else {
-		val = tm6000_get_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x0);
+		val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+							areg_f0, 0xf0);
 		if (val < 0)
 			return val;
 	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
 
-	val &= 0x0f;		/* Preserve the audio input control bits */
-	switch (bitrate) {
-	case 44100:
-		val |= 0xd0;
-		dev->audio_bitrate = bitrate;
+int tm6000_set_audio_input(struct tm6000_core *dev, enum tm6000_inaudio ainp)
+{
+	if (dev->dev_type == TM6010) {
+		/* Audio crossbar setting, default SIF1 */
+		u8 areg_f0 = 0x03;
+
+		switch (ainp) {
+		case TM6000_AIP_SIF1:
+		case TM6000_AIP_SIF2:
+			areg_f0 = 0x03;
 			break;
-	case 48000:
-		val |= 0x60;
-		dev->audio_bitrate = bitrate;
+		case TM6000_AIP_LINE1:
+			areg_f0 = 0x00;
+			break;
+		case TM6000_AIP_LINE2:
+			areg_f0 = 0x08;
+			break;
+		default:
+			return 0;
 			break;
 		}
-	if (dev->dev_type == TM6010)
-		val = tm6000_set_reg(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
-			val);
+		/* Set audio input crossbar */
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG,
+							areg_f0, 0x0f);
+	} else {
+		/* Audio setting, default LINE1 */
+		u8 areg_eb = 0x00;
+
+		switch (ainp) {
+		case TM6000_AIP_LINE1:
+			areg_eb = 0x00;
+			break;
+		case TM6000_AIP_LINE2:
+			areg_eb = 0x04;
+			break;
+		default:
+			return 0;
+			break;
+		}
+		/* Set audio input */
+		tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE,
+							areg_eb, 0x0f);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tm6000_set_audio_input);
+
+void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute)
+{
+	u8 mute_reg = 0;
+
+	if (mute)
+		mute_reg = 0x08;
+
+	tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08);
+}
+
+void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute)
+{
+	u8 mute_reg = 0;
+
+	if (mute)
+		mute_reg = 0x20;
+
+	if (dev->dev_type == TM6010) {
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL,
+							mute_reg, 0x20);
+		tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL,
+							mute_reg, 0x20);
+	} else {
+		tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL,
+							mute_reg, 0x20);
+		tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL,
+							mute_reg, 0x20);
+	}
+}
+
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute)
+{
+	enum tm6000_inaudio ainp;
+
+	if (dev->radio)
+		ainp = dev->aradio;
 	else
-		val = tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, val);
+		ainp = dev->avideo;
 
-	return val;
+	switch (ainp) {
+	case TM6000_AIP_SIF1:
+	case TM6000_AIP_SIF2:
+		if (dev->dev_type == TM6010)
+			tm6010_set_mute_sif(dev, mute);
+		else {
+			printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+					" SIF audio inputs. Please check the %s"
+					" configuration.\n", dev->name);
+			return -EINVAL;
+		}
+		break;
+	case TM6000_AIP_LINE1:
+	case TM6000_AIP_LINE2:
+		tm6010_set_mute_adc(dev, mute);
+		break;
+	default:
+		return -EINVAL;
+		break;
+	}
+	return 0;
 }
-EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate);
+EXPORT_SYMBOL_GPL(tm6000_tvaudio_set_mute);
+
+void tm6010_set_volume_sif(struct tm6000_core *dev, int vol)
+{
+	u8 vol_reg;
+
+	vol_reg = vol & 0x0F;
+
+	if (vol < 0)
+		vol_reg |= 0x40;
+
+	tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg);
+	tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg);
+}
+
+void tm6010_set_volume_adc(struct tm6000_core *dev, int vol)
+{
+	u8 vol_reg;
+
+	vol_reg = (vol + 0x10) & 0x1f;
+
+	if (dev->dev_type == TM6010) {
+		tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg);
+		tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg);
+	} else {
+		tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg);
+		tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg);
+	}
+}
+
+void tm6000_set_volume(struct tm6000_core *dev, int vol)
+{
+	enum tm6000_inaudio ainp;
+
+	if (dev->radio) {
+		ainp = dev->aradio;
+		vol += 8; /* Offset to 0 dB */
+	} else
+		ainp = dev->avideo;
+
+	switch (ainp) {
+	case TM6000_AIP_SIF1:
+	case TM6000_AIP_SIF2:
+		if (dev->dev_type == TM6010)
+			tm6010_set_volume_sif(dev, vol);
+		else
+			printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has"
+					" SIF audio inputs. Please check the %s"
+					" configuration.\n", dev->name);
+		break;
+	case TM6000_AIP_LINE1:
+	case TM6000_AIP_LINE2:
+		tm6010_set_volume_adc(dev, vol);
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(tm6000_set_volume);
 
 static LIST_HEAD(tm6000_devlist);
 static DEFINE_MUTEX(tm6000_devlist_mutex);

drivers/staging/tm6000/tm6000-stds.c

@@ -952,6 +952,22 @@ static int tm6000_set_audio_std(struct tm6000_core *dev,
 	uint8_t mono_flag = 0;  /* No mono */
 	uint8_t nicam_flag = 0; /* No NICAM */
 
+	if (dev->radio) {
+		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
+		tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80);
+		tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
+		tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
+		tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
+		tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a);
+		tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40);
+		tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc);
+		tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
+		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
+		return 0;
+	}
+
 	switch (std) {
 #if 0
 	case DK_MONO:
@@ -984,20 +1000,6 @@ static int tm6000_set_audio_std(struct tm6000_core *dev,
 	case EIAJ:
 		areg_05 = 0x02;
 		break;
-	case FM_RADIO:
-		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04);
-		tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c);
-		tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00);
-		tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18);
-		tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91);
-		tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe);
-		tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01);
-		tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13);
-		tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80);
-		return 0;
-		break;
 	case I_NICAM:
 		areg_05 = 0x08;
 		nicam_flag = 1;
@@ -1010,6 +1012,9 @@ static int tm6000_set_audio_std(struct tm6000_core *dev,
 		areg_05 = 0x0a;
 		nicam_flag = 1;
 		break;
+	default:
+		/* do nothink */
+		break;
 	}
 
 #if 0

drivers/staging/tm6000/tm6000.h

@@ -53,6 +53,14 @@ enum tm6000_devtype {
 	TM6010,
 };
 
+enum tm6000_inaudio {
+	TM6000_AIP_UNK = 0,
+	TM6000_AIP_SIF1,
+	TM6000_AIP_SIF2,
+	TM6000_AIP_LINE1,
+	TM6000_AIP_LINE2,
+};
+
 /* ------------------------------------------------------------------
  *	Basic structures
  * ------------------------------------------------------------------
@@ -174,6 +182,8 @@ struct tm6000_core {
 
 	char				*ir_codes;
 
+	__u8				radio;
+
 	/* Demodulator configuration */
 	int				demod_addr;	/* demodulator address */
 
@@ -194,6 +204,7 @@ struct tm6000_core {
 	bool				is_res_read;
 
 	struct video_device		*vfd;
+	struct video_device		*radio_dev;
 	struct tm6000_dmaqueue		vidq;
 	struct v4l2_device		v4l2_dev;
 
@@ -203,6 +214,9 @@ struct tm6000_core {
 
 	enum tm6000_mode		mode;
 
+	int				ctl_mute;             /* audio */
+	int				ctl_volume;
+
 	/* DVB-T support */
 	struct tm6000_dvb		*dvb;
 
@@ -210,7 +224,8 @@ struct tm6000_core {
 	struct snd_tm6000_card		*adev;
 	struct work_struct		wq_trigger;   /* Trigger to start/stop audio for alsa module */
 	atomic_t			stream_started;  /* stream should be running if true */
-
+	enum tm6000_inaudio		avideo;
+	enum tm6000_inaudio		aradio;
 
 	struct tm6000_IR		*ir;
 
@@ -248,6 +263,7 @@ struct tm6000_ops {
 
 struct tm6000_fh {
 	struct tm6000_core           *dev;
+	unsigned int                 radio;
 
 	/* video capture */
 	struct tm6000_fmt            *fmt;
@@ -276,12 +292,17 @@ int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index);
 int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index);
+int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value,
+						u16 index, u16 mask);
 int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep);
 int tm6000_init(struct tm6000_core *dev);
 
 int tm6000_init_analog_mode(struct tm6000_core *dev);
 int tm6000_init_digital_mode(struct tm6000_core *dev);
 int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate);
+int tm6000_set_audio_input(struct tm6000_core *dev, enum tm6000_inaudio ainp);
+int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute);
+void tm6000_set_volume(struct tm6000_core *dev, int vol);
 
 int tm6000_v4l2_register(struct tm6000_core *dev);
 int tm6000_v4l2_unregister(struct tm6000_core *dev);