Commit 8b3f8630 authored by Alex Elder's avatar Alex Elder Committed by Greg Kroah-Hartman

usb: host: remove ehci-msm.c

No Qualcomm SoC requires the "ehci-msm.c" code any more.  So remove it.
Suggested-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: default avatarAndy Gross <andy.gross@linaro.org>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 612a1b94
......@@ -222,18 +222,6 @@ config USB_EHCI_HCD_AT91
Enables support for the on-chip EHCI controller on
Atmel chips.
config USB_EHCI_MSM
tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
depends on ARCH_QCOM
select USB_EHCI_ROOT_HUB_TT
---help---
Enables support for the USB Host controller present on the
Qualcomm chipsets. Root Hub has inbuilt TT.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
This driver is not supported on boards like trout which
has an external PHY.
config USB_EHCI_TEGRA
tristate "NVIDIA Tegra HCD support"
depends on ARCH_TEGRA
......
......@@ -43,7 +43,6 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o
......
/* ehci-msm.c - HSUSB Host Controller Driver Implementation
*
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
*
* Partly derived from ehci-fsl.c and ehci-hcd.c
* Copyright (c) 2000-2004 by David Brownell
* Copyright (c) 2005 MontaVista Software
*
* All source code in this file is licensed under the following license except
* where indicated.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, you can find it at http://www.fsf.org
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/usb/otg.h>
#include <linux/usb/msm_hsusb_hw.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/acpi.h>
#include "ehci.h"
#define MSM_USB_BASE (hcd->regs)
#define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller"
static const char hcd_name[] = "ehci-msm";
static struct hc_driver __read_mostly msm_hc_driver;
static int ehci_msm_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
ehci->caps = USB_CAPLENGTH;
hcd->has_tt = 1;
retval = ehci_setup(hcd);
if (retval)
return retval;
/* select ULPI phy and clear other status/control bits in PORTSC */
writel(PORTSC_PTS_ULPI, USB_PORTSC);
/* bursts of unspecified length. */
writel(0, USB_AHBBURST);
/* Use the AHB transactor, allow posted data writes */
writel(0x8, USB_AHBMODE);
/* Disable streaming mode and select host mode */
writel(0x13, USB_USBMODE);
/* Disable ULPI_TX_PKT_EN_CLR_FIX which is valid only for HSIC */
writel(readl(USB_GENCONFIG_2) & ~ULPI_TX_PKT_EN_CLR_FIX, USB_GENCONFIG_2);
return 0;
}
static int ehci_msm_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
struct usb_phy *phy;
int ret;
dev_dbg(&pdev->dev, "ehci_msm proble\n");
hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to get IRQ resource\n");
goto put_hcd;
}
hcd->irq = ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Unable to get memory resource\n");
ret = -ENODEV;
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -ENOMEM;
goto put_hcd;
}
/*
* If there is an OTG driver, let it take care of PHY initialization,
* clock management, powering up VBUS, mapping of registers address
* space and power management.
*/
if (pdev->dev.of_node)
phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
else
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(phy)) {
if (PTR_ERR(phy) == -EPROBE_DEFER) {
dev_err(&pdev->dev, "unable to find transceiver\n");
ret = -EPROBE_DEFER;
goto put_hcd;
}
phy = NULL;
}
hcd->usb_phy = phy;
device_init_wakeup(&pdev->dev, 1);
if (phy && phy->otg) {
/*
* MSM OTG driver takes care of adding the HCD and
* placing hardware into low power mode via runtime PM.
*/
ret = otg_set_host(phy->otg, &hcd->self);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register with transceiver\n");
goto put_hcd;
}
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
} else {
ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
if (ret)
goto put_hcd;
}
return 0;
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int ehci_msm_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
if (hcd->usb_phy && hcd->usb_phy->otg)
otg_set_host(hcd->usb_phy->otg, NULL);
else
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
static int ehci_msm_pm_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
bool do_wakeup = device_may_wakeup(dev);
dev_dbg(dev, "ehci-msm PM suspend\n");
/* Only call ehci_suspend if ehci_setup has been done */
if (ehci->sbrn)
return ehci_suspend(hcd, do_wakeup);
return 0;
}
static int ehci_msm_pm_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
dev_dbg(dev, "ehci-msm PM resume\n");
/* Only call ehci_resume if ehci_setup has been done */
if (ehci->sbrn)
ehci_resume(hcd, false);
return 0;
}
#else
#define ehci_msm_pm_suspend NULL
#define ehci_msm_pm_resume NULL
#endif
static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
.suspend = ehci_msm_pm_suspend,
.resume = ehci_msm_pm_resume,
};
static const struct acpi_device_id msm_ehci_acpi_ids[] = {
{ "QCOM8040", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, msm_ehci_acpi_ids);
static const struct of_device_id msm_ehci_dt_match[] = {
{ .compatible = "qcom,ehci-host", },
{}
};
MODULE_DEVICE_TABLE(of, msm_ehci_dt_match);
static struct platform_driver ehci_msm_driver = {
.probe = ehci_msm_probe,
.remove = ehci_msm_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "msm_hsusb_host",
.pm = &ehci_msm_dev_pm_ops,
.of_match_table = msm_ehci_dt_match,
.acpi_match_table = ACPI_PTR(msm_ehci_acpi_ids),
},
};
static const struct ehci_driver_overrides msm_overrides __initconst = {
.reset = ehci_msm_reset,
};
static int __init ehci_msm_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&msm_hc_driver, &msm_overrides);
return platform_driver_register(&ehci_msm_driver);
}
module_init(ehci_msm_init);
static void __exit ehci_msm_cleanup(void)
{
platform_driver_unregister(&ehci_msm_driver);
}
module_exit(ehci_msm_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:msm-ehci");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment