[E1000] Whitespace changes

* Miscellaneous whitespace changes

drivers/net/e1000/e1000_ethtool.c

@@ -308,8 +308,8 @@ e1000_ethtool_gwol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
 		/* Fall Through */
 
 	default:
-		wol->supported = WAKE_UCAST | WAKE_MCAST
-			         | WAKE_BCAST | WAKE_MAGIC;
+		wol->supported = WAKE_UCAST | WAKE_MCAST |
+				 WAKE_BCAST | WAKE_MAGIC;
 
 		wol->wolopts = 0;
 		if(adapter->wol & E1000_WUFC_EX)
@@ -343,7 +343,7 @@ e1000_ethtool_swol(struct e1000_adapter *adapter, struct ethtool_wolinfo *wol)
 		/* Fall Through */
 
 	default:
-		if(wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY))
+		if(wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
 			return -EOPNOTSUPP;
 
 		adapter->wol = 0;

drivers/net/e1000/e1000_hw.c

@@ -2236,6 +2236,7 @@ e1000_write_phy_reg(struct e1000_hw *hw,
 
         e1000_shift_out_mdi_bits(hw, mdic, 32);
     }
+
     return 0;
 }
 

drivers/net/e1000/e1000_hw.h

@@ -33,6 +33,7 @@
 #ifndef _E1000_HW_H_
 #define _E1000_HW_H_
 
+
 #include "e1000_osdep.h"
 
 /* Forward declarations of structures used by the shared code */
@@ -290,6 +291,7 @@ uint32_t e1000_io_read(struct e1000_hw *hw, uint32_t port);
 uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
 void e1000_io_write(struct e1000_hw *hw, uint32_t port, uint32_t value);
 void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value);
+
 #define E1000_READ_REG_IO(a, reg) \
     e1000_read_reg_io((a), E1000_##reg)
 #define E1000_WRITE_REG_IO(a, reg, val) \
@@ -1748,7 +1750,7 @@ struct e1000_hw {
 #define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
 #define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
 #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT  0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
 
 /* Next Page TX Register */
 #define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */

drivers/net/e1000/e1000_main.c

@@ -189,6 +189,7 @@ struct notifier_block e1000_notifier_reboot = {
 	.priority	= 0
 };
 
+
 /* Exported from other modules */
 
 extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -554,6 +555,7 @@ e1000_remove(struct pci_dev *pdev)
 
 	e1000_phy_hw_reset(&adapter->hw);
 
+
 	iounmap(adapter->hw.hw_addr);
 	pci_release_regions(pdev);
 
@@ -2535,6 +2537,7 @@ e1000_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
 	return NOTIFY_DONE;
 }
 
+
 static int
 e1000_suspend(struct pci_dev *pdev, uint32_t state)
 {

drivers/net/e1000/e1000_param.c

@@ -169,7 +169,7 @@ E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
  *
  * Valid Range: 0-65535
  *
- * Default Value: 0/128
+ * Default Value: 0
  */
 
 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
@@ -309,7 +309,7 @@ e1000_check_options(struct e1000_adapter *adapter)
 			.name = "Transmit Descriptors",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TXD),
 			.def  = DEFAULT_TXD,
-			.arg  = { .r = { .min = MIN_TXD }}
+			.arg  = { .r { .min = MIN_TXD }}
 		};
 		struct e1000_desc_ring *tx_ring = &adapter->tx_ring;
 		e1000_mac_type mac_type = adapter->hw.mac_type;
@@ -362,7 +362,8 @@ e1000_check_options(struct e1000_adapter *adapter)
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
 			.def  = e1000_fc_default,
-			.arg  = { .l = { .nr = ARRAY_SIZE(fc_list), .p = fc_list }}
+			.arg  = { .l = { .nr = ARRAY_SIZE(fc_list),
+					 .p = fc_list }}
 		};
 
 		int fc = FlowControl[bd];
@@ -370,58 +371,57 @@ e1000_check_options(struct e1000_adapter *adapter)
 		adapter->hw.fc = adapter->hw.original_fc = fc;
 	}
 	{ /* Transmit Interrupt Delay */
-		char *tidv = "using default of " __MODULE_STRING(DEFAULT_TIDV);
 		struct e1000_option opt = {
 			.type = range_option,
 			.name = "Transmit Interrupt Delay",
-			.arg  = { .r = { .min = MIN_TXDELAY, .max = MAX_TXDELAY }}
+			.err  = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+			.def  = DEFAULT_TIDV,
+			.arg  = { .r = { .min = MIN_TXDELAY,
+					 .max = MAX_TXDELAY }}
 		};
-		opt.def = DEFAULT_TIDV;
-		opt.err = tidv;
 
 		adapter->tx_int_delay = TxIntDelay[bd];
 		e1000_validate_option(&adapter->tx_int_delay, &opt);
 	}
 	{ /* Transmit Absolute Interrupt Delay */
-		char *tadv = "using default of " __MODULE_STRING(DEFAULT_TADV);
 		struct e1000_option opt = {
 			.type = range_option,
 			.name = "Transmit Absolute Interrupt Delay",
-			.arg  = { .r = { .min = MIN_TXABSDELAY, .max = MAX_TXABSDELAY }}
+			.err  = "using default of " __MODULE_STRING(DEFAULT_TADV),
+			.def  = DEFAULT_TADV,
+			.arg  = { .r = { .min = MIN_TXABSDELAY,
+					 .max = MAX_TXABSDELAY }}
 		};
-		opt.def = DEFAULT_TADV;
-		opt.err = tadv;
 
 		adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
 		e1000_validate_option(&adapter->tx_abs_int_delay, &opt);
 	}
 	{ /* Receive Interrupt Delay */
-		char *rdtr = "using default of " __MODULE_STRING(DEFAULT_RDTR);
 		struct e1000_option opt = {
 			.type = range_option,
 			.name = "Receive Interrupt Delay",
-			.arg  = { .r = { .min = MIN_RXDELAY, .max = MAX_RXDELAY }}
+			.err  = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+			.def  = DEFAULT_RDTR,
+			.arg  = { .r = { .min = MIN_RXDELAY,
+					 .max = MAX_RXDELAY }}
 		};
-		opt.def = DEFAULT_RDTR;
-		opt.err = rdtr;
 
 		adapter->rx_int_delay = RxIntDelay[bd];
 		e1000_validate_option(&adapter->rx_int_delay, &opt);
 	}
 	{ /* Receive Absolute Interrupt Delay */
-		char *radv = "using default of " __MODULE_STRING(DEFAULT_RADV);
 		struct e1000_option opt = {
 			.type = range_option,
 			.name = "Receive Absolute Interrupt Delay",
-			.arg  = { .r = { .min = MIN_RXABSDELAY, .max = MAX_RXABSDELAY }}
+			.err  = "using default of " __MODULE_STRING(DEFAULT_RADV),
+			.def  = DEFAULT_RADV,
+			.arg  = { .r = { .min = MIN_RXABSDELAY,
+					 .max = MAX_RXABSDELAY }}
 		};
-		opt.def = DEFAULT_RADV;
-		opt.err = radv;
 
 		adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
 		e1000_validate_option(&adapter->rx_abs_int_delay, &opt);
 	}
-	
 	switch(adapter->hw.media_type) {
 	case e1000_media_type_fiber:
 		e1000_check_fiber_options(adapter);
@@ -486,7 +486,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 			.name = "Speed",
 			.err  = "parameter ignored",
 			.def  = 0,
-			.arg  = { .l = { .nr = ARRAY_SIZE(speed_list), .p = speed_list }}
+			.arg  = { .l = { .nr = ARRAY_SIZE(speed_list),
+					 .p = speed_list }}
 		};
 
 		speed = Speed[bd];
@@ -502,7 +503,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 			.name = "Duplex",
 			.err  = "parameter ignored",
 			.def  = 0,
-			.arg  = { .l = { .nr = ARRAY_SIZE(dplx_list), .p = dplx_list }}
+			.arg  = { .l = { .nr = ARRAY_SIZE(dplx_list),
+					 .p = dplx_list }}
 		};
 
 		dplx = Duplex[bd];
@@ -554,7 +556,8 @@ e1000_check_copper_options(struct e1000_adapter *adapter)
 			.name = "AutoNeg",
 			.err  = "parameter ignored",
 			.def  = AUTONEG_ADV_DEFAULT,
-			.arg  = { .l = { .nr = ARRAY_SIZE(an_list), .p = an_list }}
+			.arg  = { .l = { .nr = ARRAY_SIZE(an_list),
+					 .p = an_list }}
 		};
 
 		int an = AutoNeg[bd];