Commit 8bfd1743 authored by Sui Chen's avatar Sui Chen Committed by Tejun Heo

ahci: Acer SA5-271 SSD Not Detected Fix

(Correction in this resend: fixed function name acer_sa5_271_workaround; fixed
 the always-true condition in the function; fixed description.)

On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not
get detected because the port_map and CAP.nr_ports combination causes the driver
to skip the port that is actually connected to the SSD. More specifically,
either all SATA ports are identified as DUMMY, or all ports get ``link down''
and never get up again.

This problem occurs occasionally. When this problem occurs, CAP may hold a
value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01.
When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map
may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to
0x7 significantly reduces the occurrence of this problem.

Link: https://bugzilla.kernel.org/attachment.cgi?id=253091Signed-off-by: default avatarSui Chen <suichen6@gmail.com>
Tested-by: default avatarDamian Ivanov <damianatorrpm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent a95cfad9
...@@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) ...@@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
{} {}
#endif #endif
/*
* On the Acer Aspire Switch Alpha 12, sometimes all SATA ports are detected
* as DUMMY, or detected but eventually get a "link down" and never get up
* again. When this happens, CAP.NP may hold a value of 0x00 or 0x01, and the
* port_map may hold a value of 0x00.
*
* Overriding CAP.NP to 0x02 and the port_map to 0x7 will reveal all 3 ports
* and can significantly reduce the occurrence of the problem.
*
* https://bugzilla.kernel.org/show_bug.cgi?id=189471
*/
static void acer_sa5_271_workaround(struct ahci_host_priv *hpriv,
struct pci_dev *pdev)
{
static const struct dmi_system_id sysids[] = {
{
.ident = "Acer Switch Alpha 12",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271")
},
},
{ }
};
if (dmi_check_system(sysids)) {
dev_info(&pdev->dev, "enabling Acer Switch Alpha 12 workaround\n");
if ((hpriv->saved_cap & 0xC734FF00) == 0xC734FF00) {
hpriv->port_map = 0x7;
hpriv->cap = 0xC734FF02;
}
}
}
#ifdef CONFIG_ARM64 #ifdef CONFIG_ARM64
/* /*
* Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently. * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently.
...@@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ...@@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
"online status unreliable, applying workaround\n"); "online status unreliable, applying workaround\n");
} }
/* Acer SA5-271 workaround modifies private_data */
acer_sa5_271_workaround(hpriv, pdev);
/* CAP.NP sometimes indicate the index of the last enabled /* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so * port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at * determining the maximum port number requires looking at
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment