regulator: dt: add policy to have property "regulator-compatible"

Add the policy for regulator DT such that if device have multiple
regulator and its binding contains a child node that describes each
regulator then each regulator child node must have the property
"regulator-compatible" which matches with regulator name of their
hardware counterparts.
Modify the DT documentation of regulator devices to reflect this
policy.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Documentation/devicetree/bindings/mfd/tps65910.txt

@@ -17,8 +17,9 @@ Required properties:
   device need to be present. The definition for each of these nodes is defined
   using the standard binding for regulators found at
   Documentation/devicetree/bindings/regulator/regulator.txt.
+  The regulator is matched with the regulator-compatible.
 
-  The valid names for regulators are:
+  The valid regulator-compatible values are:
   tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
             vaux2, vaux33, vmmc
   tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
@@ -57,73 +58,100 @@ Example:
 		ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
 
 		regulators {
-			vdd1_reg: vdd1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd1_reg: regulator@0 {
+				regulator-compatible = "vdd1";
+				reg = <0>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			vdd2_reg: vdd2 {
+			vdd2_reg: regulator@1 {
+				regulator-compatible = "vdd2";
+				reg = <1>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <4>;
 			};
-			vddctrl_reg: vddctrl {
+			vddctrl_reg: regulator@2 {
+				regulator-compatible = "vddctrl";
+				reg = <2>;
 				regulator-min-microvolt = < 600000>;
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			vio_reg: vio {
+			vio_reg: regulator@3 {
+				regulator-compatible = "vio";
+				reg = <3>;
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <1>;
 			};
-			ldo1_reg: ldo1 {
+			ldo1_reg: regulator@4 {
+				regulator-compatible = "ldo1";
+				reg = <4>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo2_reg: ldo2 {
+			ldo2_reg: regulator@5 {
+				regulator-compatible = "ldo2";
+				reg = <5>;
 				regulator-min-microvolt = <1050000>;
 				regulator-max-microvolt = <1050000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo3_reg: ldo3 {
+			ldo3_reg: regulator@6 {
+				regulator-compatible = "ldo3";
+				reg = <6>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo4_reg: ldo4 {
+			ldo4_reg: regulator@7 {
+				regulator-compatible = "ldo4";
+				reg = <7>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo5_reg: ldo5 {
+			ldo5_reg: regulator@8 {
+				regulator-compatible = "ldo5";
+				reg = <8>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo6_reg: ldo6 {
+			ldo6_reg: regulator@9 {
+				regulator-compatible = "ldo6";
+				reg = <9>;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				ti,regulator-ext-sleep-control = <0>;
 			};
-			ldo7_reg: ldo7 {
+			ldo7_reg: regulator@10 {
+				regulator-compatible = "ldo7";
+				reg = <10>;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
 				ti,regulator-ext-sleep-control = <1>;
 			};
-			ldo8_reg: ldo8 {
+			ldo8_reg: regulator@11 {
+				regulator-compatible = "ldo8";
+				reg = <11>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;

Documentation/devicetree/bindings/regulator/regulator.txt

@@ -11,6 +11,10 @@ Optional properties:
 - regulator-boot-on: bootloader/firmware enabled regulator
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-compatible: If a regulator chip contains multiple
+  regulators, and if the chip's binding contains a child node that
+  describes each regulator, then this property indicates which regulator
+  this child node is intended to configure.
 
 Example:
 

Documentation/devicetree/bindings/regulator/tps6586x.txt

@@ -6,8 +6,9 @@ Required properties:
 - interrupts: the interrupt outputs of the controller
 - #gpio-cells: number of cells to describe a GPIO
 - gpio-controller: mark the device as a GPIO controller
-- regulators: list of regulators provided by this controller, must be named
-  after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
+- regulators: list of regulators provided by this controller, must have
+  property "regulator-compatible" to match their hardware counterparts:
+  sm[0-2], ldo[0-9] and ldo_rtc
 
 Each regulator is defined using the standard binding for regulators.
 
@@ -22,74 +23,103 @@ Example:
 		gpio-controller;
 
 		regulators {
-			sm0_reg: sm0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sm0_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "sm0";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm1_reg: sm1 {
+			sm1_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "sm1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			sm2_reg: sm2 {
+			sm2_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "sm2";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <4550000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo0_reg: ldo0 {
+			ldo0_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "ldo0";
 				regulator-name = "PCIE CLK";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo1_reg: ldo1 {
+			ldo1_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "ldo1";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo2_reg: ldo2 {
+			ldo2_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "ldo2";
 				regulator-min-microvolt = < 725000>;
 				regulator-max-microvolt = <1500000>;
 			};
 
-			ldo3_reg: ldo3 {
+			ldo3_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo3";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo4_reg: ldo4 {
+			ldo4_reg: regulator@7 {
+				reg = <7>;
+				regulator-compatible = "ldo4";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2475000>;
 			};
 
-			ldo5_reg: ldo5 {
+			ldo5_reg: regulator@8 {
+				reg = <8>;
+				regulator-compatible = "ldo5";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo6_reg: ldo6 {
+			ldo6_reg: regulator@9 {
+				reg = <9>;
+				regulator-compatible = "ldo6";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo7_reg: ldo7 {
+			ldo7_reg: regulator@10 {
+				reg = <10>;
+				regulator-compatible = "ldo7";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo8_reg: ldo8 {
+			ldo8_reg: regulator@11 {
+				reg = <11>;
+				regulator-compatible = "ldo8";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo9_reg: ldo9 {
+			ldo9_reg: regulator@12 {
+				reg = <12>;
+				regulator-compatible = "ldo9";
 				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3300000>;
 			};