Commit 8c8e87bc authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: serial: oti6858.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7065e826
......@@ -256,11 +256,11 @@ static void setup_line(struct work_struct *work)
priv->setup_done = 1;
spin_unlock_irqrestore(&priv->lock, flags);
dbg("%s(): submitting interrupt urb", __func__);
dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
__func__, result);
}
}
......@@ -310,11 +310,11 @@ static void send_data(struct work_struct *work)
if (count == 0) {
priv->flags.write_urb_in_use = 0;
dbg("%s(): submitting interrupt urb", __func__);
dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
__func__, result);
}
return;
}
......@@ -325,8 +325,8 @@ static void send_data(struct work_struct *work)
port->write_urb->transfer_buffer_length = count;
result = usb_submit_urb(port->write_urb, GFP_NOIO);
if (result != 0) {
dev_err_console(port, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n",
__func__, result);
priv->flags.write_urb_in_use = 0;
}
......@@ -420,10 +420,8 @@ static void oti6858_set_termios(struct tty_struct *tty,
__le16 divisor;
int br;
if (!tty) {
dbg("%s(): no tty structures", __func__);
if (!tty)
return;
}
cflag = tty->termios->c_cflag;
......@@ -560,11 +558,11 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
spin_unlock_irqrestore(&priv->lock, flags);
kfree(buf);
dbg("%s(): submitting interrupt urb", __func__);
dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n",
__func__, result);
oti6858_close(port);
return result;
}
......@@ -586,14 +584,14 @@ static void oti6858_close(struct usb_serial_port *port)
kfifo_reset_out(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
dbg("%s(): after buf_clear()", __func__);
dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__);
/* cancel scheduled setup */
cancel_delayed_work_sync(&priv->delayed_setup_work);
cancel_delayed_work_sync(&priv->delayed_write_work);
/* shutdown our urbs */
dbg("%s(): shutting down urbs", __func__);
dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
......@@ -607,8 +605,8 @@ static int oti6858_tiocmset(struct tty_struct *tty,
unsigned long flags;
u8 control;
dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
__func__, port->number, set, clear);
dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n",
__func__, set, clear);
/* FIXME: check if this is correct (active high/low) */
spin_lock_irqsave(&priv->lock, flags);
......@@ -655,7 +653,7 @@ static int oti6858_tiocmget(struct tty_struct *tty)
if ((pin_state & PIN_DCD) != 0)
result |= TIOCM_CD;
dbg("%s() = 0x%08x", __func__, result);
dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result);
return result;
}
......@@ -700,15 +698,14 @@ static int oti6858_ioctl(struct tty_struct *tty,
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
__func__, port->number, cmd, arg);
dev_dbg(&port->dev, "%s(cmd = 0x%04x, arg = 0x%08lx)\n", __func__, cmd, arg);
switch (cmd) {
case TIOCMIWAIT:
dbg("%s(): TIOCMIWAIT", __func__);
dev_dbg(&port->dev, "%s(): TIOCMIWAIT\n", __func__);
return wait_modem_info(port, arg);
default:
dbg("%s(): 0x%04x not supported", __func__, cmd);
dev_dbg(&port->dev, "%s(): 0x%04x not supported\n", __func__, cmd);
break;
}
return -ENOIOCTLCMD;
......@@ -738,11 +735,11 @@ static void oti6858_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n",
__func__, status);
return;
default:
dbg("%s(): nonzero urb status received: %d",
dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n",
__func__, status);
break;
}
......@@ -759,8 +756,7 @@ static void oti6858_read_int_callback(struct urb *urb)
priv->transient = 4;
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
__func__);
dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
......@@ -774,8 +770,7 @@ static void oti6858_read_int_callback(struct urb *urb)
priv->transient = 4;
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
__func__);
dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
......@@ -826,7 +821,7 @@ static void oti6858_read_int_callback(struct urb *urb)
if (resubmit) {
int result;
/* dbg("%s(): submitting interrupt urb", __func__); */
/* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
......@@ -851,7 +846,7 @@ static void oti6858_read_bulk_callback(struct urb *urb)
spin_unlock_irqrestore(&priv->lock, flags);
if (status != 0) {
dbg("%s(): unable to handle the error, exiting", __func__);
dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__);
return;
}
......@@ -885,15 +880,13 @@ static void oti6858_write_bulk_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
__func__, status);
dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status);
priv->flags.write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s(): nonzero write bulk status received: %d",
__func__, status);
dbg("%s(): overflow in write", __func__);
dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status);
dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__);
port->write_urb->transfer_buffer_length = 1;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
......@@ -908,7 +901,7 @@ static void oti6858_write_bulk_callback(struct urb *urb)
priv->flags.write_urb_in_use = 0;
/* schedule the interrupt urb if we are still open */
dbg("%s(): submitting interrupt urb", __func__);
dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): failed submitting int urb,"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment