Merge branches 'hwmod_am335x_support_3.6', 'clkdm_pwrdm_devel_a_3.6' and...

Merge branches 'hwmod_am335x_support_3.6', 'clkdm_pwrdm_devel_a_3.6' and 'misc_devel_3.6' into omap_devel_f_3.6

arch/arm/mach-omap2/clockdomain44xx.c

@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 	return 0;
 }
@@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
 
 static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 {
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap4_clkdm_wakeup(clkdm);
+	else
 		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
+						 clkdm->cm_inst,
+						 clkdm->clkdm_offs);
 }
 
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)

arch/arm/mach-omap2/cminst44xx.c

@@ -234,20 +234,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
 
-/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
 /**
  * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in

arch/arm/mach-omap2/cminst44xx.h

@@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
-
 extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
 				       u16 clkctrl_offs);
 extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}
-
-# endif
-
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly

arch/arm/mach-omap2/control.h

@@ -182,6 +182,7 @@
 #define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
 #define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
 #define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL	(OMAP2_CONTROL_GENERAL + 0x02f0)
 
 /* OMAP44xx control efuse offsets */
 #define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C

arch/arm/mach-omap2/dpll3xxx.c

@@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
  */
 static int _omap3_noncore_dpll_lock(struct clk *clk)
 {
+	const struct dpll_data *dd;
 	u8 ai;
-	int r;
+	u8 state = 1;
+	int r = 0;
 
 	pr_debug("clock: locking DPLL %s\n", clk->name);
 
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+		goto done;
+
 	ai = omap3_dpll_autoidle_read(clk);
 
 	if (ai)
@@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	if (ai)
 		omap3_dpll_allow_idle(clk);
 
+done:
 	return r;
 }
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -387,6 +387,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+	u32 v;
+	u32 dmadisable_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+	v = oh->_sysc_cache;
+	dmadisable_mask =
+		(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+	v |= dmadisable_mask;
+	_write_sysconfig(v, oh);
+
+	return 0;
+}
+
 /**
  * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
  * @oh: struct omap_hwmod *
@@ -1698,11 +1741,17 @@ static int _ocp_softreset(struct omap_hwmod *oh)
  * therefore have no OCP header registers to access.  Others (like the
  * IVA) have idiosyncratic reset sequences.  So for these relatively
  * rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer.  Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
  */
 static int _reset(struct omap_hwmod *oh)
 {
@@ -1724,6 +1773,8 @@ static int _reset(struct omap_hwmod *oh)
 		}
 	}
 
+	_set_dmadisable(oh);
+
 	/*
 	 * OCP_SYSCONFIG bits need to be reprogrammed after a
 	 * softreset.  The _enable() function should be split to avoid
@@ -3401,3 +3452,18 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
 
 	return 0;
 }
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	return oh->main_clk;
+}

arch/arm/mach-omap2/omap_hwmod_common_data.c

@@ -47,6 +47,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
 	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
+	.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
 };
 
 /**

arch/arm/mach-omap2/powerdomain.c

@@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
  *
  * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
  * if the powerdomain pointer is null or returns the current power state
- * upon success.
+ * upon success. Note that if the power domain only supports the ON state
+ * then just return ON as the current state.
  */
 int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
@@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
+	if (pwrdm->pwrsts == PWRSTS_ON)
+		return PWRDM_POWER_ON;
+
 	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
 		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
 

arch/arm/mach-omap2/prcm.c

@@ -35,6 +35,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
+#include "cminst44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
@@ -164,3 +165,25 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		omap_cm_base_init();
 	}
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+				 u16 clkctrl_offs)
+{
+}

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -228,68 +228,6 @@
 
 
 #ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
-					defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
-		s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
-						u8 st_shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-#else
 /* Power/reset management domain register get/set */
 extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
 extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif	/* CONFIG_ARCH_OMAP4 */
-
 #endif
 
 /*

arch/arm/mach-omap2/prm_common.c

@@ -319,3 +319,65 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 	omap_prcm_irq_cleanup();
 	return -ENOMEM;
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+}
+
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+		s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+						u8 st_shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -70,6 +70,8 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 #define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
 #define SYSC_TYPE2_MIDLEMODE_SHIFT	4
 #define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT	16
+#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE3.
@@ -293,6 +295,7 @@ struct omap_hwmod_ocp_if {
 #define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 #define SYSC_HAS_RESET_STATUS	(1 << 9)
+#define SYSC_HAS_DMADISABLE	(1 << 10)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -308,6 +311,7 @@ struct omap_hwmod_ocp_if {
  * @enwkup_shift: Offset of the enawakeup bit
  * @srst_shift: Offset of the softreset bit
  * @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
  */
 struct omap_hwmod_sysc_fields {
 	u8 midle_shift;
@@ -316,6 +320,7 @@ struct omap_hwmod_sysc_fields {
 	u8 enwkup_shift;
 	u8 srst_shift;
 	u8 autoidle_shift;
+	u8 dmadisable_shift;
 };
 
 /**
@@ -641,6 +646,8 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 
 int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out