drm/nouveau/device: Add support for GK208B, resolves bug 86935

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/core/engine/device/nve0.c

@@ -249,6 +249,39 @@ nve0_identify(struct nouveau_device *device)
 		device->oclass[NVDEV_ENGINE_PPP    ] = &nvc0_ppp_oclass;
 		device->oclass[NVDEV_ENGINE_PERFMON] = &nvf0_perfmon_oclass;
 		break;
+	case 0x106:
+		device->cname = "GK208B";
+		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nouveau_bios_oclass;
+		device->oclass[NVDEV_SUBDEV_GPIO   ] =  nve0_gpio_oclass;
+		device->oclass[NVDEV_SUBDEV_I2C    ] =  nve0_i2c_oclass;
+		device->oclass[NVDEV_SUBDEV_FUSE   ] = &gf100_fuse_oclass;
+		device->oclass[NVDEV_SUBDEV_CLOCK  ] = &nve0_clock_oclass;
+		device->oclass[NVDEV_SUBDEV_THERM  ] = &nvd0_therm_oclass;
+		device->oclass[NVDEV_SUBDEV_MXM    ] = &nv50_mxm_oclass;
+		device->oclass[NVDEV_SUBDEV_DEVINIT] =  nvc0_devinit_oclass;
+		device->oclass[NVDEV_SUBDEV_MC     ] =  gk20a_mc_oclass;
+		device->oclass[NVDEV_SUBDEV_BUS    ] =  nvc0_bus_oclass;
+		device->oclass[NVDEV_SUBDEV_TIMER  ] = &nv04_timer_oclass;
+		device->oclass[NVDEV_SUBDEV_FB     ] =  nve0_fb_oclass;
+		device->oclass[NVDEV_SUBDEV_LTC    ] =  gk104_ltc_oclass;
+		device->oclass[NVDEV_SUBDEV_IBUS   ] = &nve0_ibus_oclass;
+		device->oclass[NVDEV_SUBDEV_INSTMEM] =  nv50_instmem_oclass;
+		device->oclass[NVDEV_SUBDEV_VM     ] = &nvc0_vmmgr_oclass;
+		device->oclass[NVDEV_SUBDEV_BAR    ] = &nvc0_bar_oclass;
+		device->oclass[NVDEV_SUBDEV_PWR    ] =  nv108_pwr_oclass;
+		device->oclass[NVDEV_SUBDEV_VOLT   ] = &nv40_volt_oclass;
+		device->oclass[NVDEV_ENGINE_DMAOBJ ] =  nvd0_dmaeng_oclass;
+		device->oclass[NVDEV_ENGINE_FIFO   ] =  nv108_fifo_oclass;
+		device->oclass[NVDEV_ENGINE_SW     ] =  nvc0_software_oclass;
+		device->oclass[NVDEV_ENGINE_GR     ] =  nv108_graph_oclass;
+		device->oclass[NVDEV_ENGINE_DISP   ] =  nvf0_disp_oclass;
+		device->oclass[NVDEV_ENGINE_COPY0  ] = &nve0_copy0_oclass;
+		device->oclass[NVDEV_ENGINE_COPY1  ] = &nve0_copy1_oclass;
+		device->oclass[NVDEV_ENGINE_COPY2  ] = &nve0_copy2_oclass;
+		device->oclass[NVDEV_ENGINE_BSP    ] = &nve0_bsp_oclass;
+		device->oclass[NVDEV_ENGINE_VP     ] = &nve0_vp_oclass;
+		device->oclass[NVDEV_ENGINE_PPP    ] = &nvc0_ppp_oclass;
+		break;
 	case 0x108:
 		device->cname = "GK208";
 		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nouveau_bios_oclass;