Merge branches 'clk-imx', 'clk-ux500' and 'clk-debugfs' into clk-next

* clk-imx: (21 commits)
  clk: imx: Make CLK_IMX8ULP select MXC_CLK
  clk: imx: imx6ul: Fix csi clk gate register
  clk: imx: imx6ul: Move csi_sel mux to correct base register
  clk: imx: Fix the build break when clk-imx8ulp build as module
  clk: imx: Add the pcc reset controller support on imx8ulp
  clk: imx: Add clock driver for imx8ulp
  clk: imx: Update the pfdv2 for 8ulp specific support
  clk: imx: disable the pfd when set pfdv2 clock rate
  clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
  clk: imx: disable i.mx7ulp composite clock during initialization
  clk: imx: Update the compsite driver to support imx8ulp
  clk: imx: Update the pllv4 to support imx8ulp
  dt-bindings: clock: Add imx8ulp clock support
  clk: imx: Rework imx_clk_hw_pll14xx wrapper
  clk: imx: Rework all imx_clk_hw_composite wrappers
  clk: imx: Rework all clk_hw_register_divider wrappers
  clk: imx: Rework all clk_hw_register_mux wrappers
  clk: imx: Rework all clk_hw_register_gate2 wrappers
  clk: imx: Rework all clk_hw_register_gate wrappers
  clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
  ...

* clk-ux500:
  clk: ux500: Add driver for the reset portions of PRCC
  dt-bindings: clock: u8500: Rewrite in YAML and extend

* clk-debugfs:
  clk: use clk_core_get_rate_recalc() in clk_rate_get()

Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module Binding
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Generation & Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        #clock-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module Binding
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The PCC modules control
+  software reset, clock selection, optional division and clock gating mode
+  for peripherals.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Peripheral Clock Control Module node:
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+  DB8500 digital baseband system-on-chip and its siblings such as
+  DB8520. These bindings consider the clocks present in the SoC
+  itself, not off-chip clocks. There are four different on-chip
+  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+  control management unit) clocks and PRCC (peripheral reset and
+  clock controller) clocks. For some reason PRCC 4 does not exist so
+  the itemization can be a bit unintuitive.
+
+properties:
+  compatible:
+    enum:
+      - stericsson,u8500-clks
+      - stericsson,u8540-clks
+      - stericsson,u9540-clks
+
+  reg:
+    items:
+      - description: PRCC 1 register area
+      - description: PRCC 2 register area
+      - description: PRCC 3 register area
+      - description: PRCC 5 register area
+      - description: PRCC 6 register area
+
+  prcmu-clock:
+    description: A subnode with one clock cell for PRCMU (power, reset, control
+      management unit) clocks. The cell indicates which PRCMU clock in the
+      prcmu-clock node the consumer wants to use.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    additionalProperties: false
+
+  prcc-periph-clock:
+    description: A subnode with two clock cells for PRCC (peripheral
+      reset and clock controller) peripheral clocks. The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+      5, 6. The second cell indicates which clock inside the PRCC block it
+      wants, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-kernel-clock:
+    description: A subnode with two clock cells for PRCC (peripheral reset
+      and clock controller) kernel clocks. The first cell indicates which PRCC
+      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+      second cell indicates which clock inside the PRCC block it wants, possible
+      values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-reset-controller:
+    description: A subnode with two reset cells for the reset portions of the
+      PRCC (peripheral reset and clock controller). The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3
+      5 and 6. The second cell indicates which reset line inside the PRCC block
+      it wants to control, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#reset-cells':
+        const: 2
+
+    additionalProperties: false
+
+  rtc32k-clock:
+    description: A subnode with zero clock cells for the 32kHz RTC clock.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  smp-twd-clock:
+    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+      clock cells.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - prcmu-clock
+  - prcc-periph-clock
+  - prcc-kernel-clock
+  - rtc32k-clock
+  - smp-twd-clock
+
+additionalProperties: false

Documentation/devicetree/bindings/clock/ux500.txt

-Clock bindings for ST-Ericsson Ux500 clocks
-
-Required properties :
-- compatible : shall contain only one of the following:
-  "stericsson,u8500-clks"
-  "stericsson,u8540-clks"
-  "stericsson,u9540-clks"
-- reg : shall contain base register location and length for
-  CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
-  CLKRST4, which does not exist.
-
-Required subnodes:
-- prcmu-clock: a subnode with one clock cell for PRCMU (power,
-  reset, control unit) clocks. The cell indicates which PRCMU
-  clock in the prcmu-clock node the consumer wants to use.
-- prcc-periph-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) peripheral clocks.
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- prcc-kernel-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) kernel clocks
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- rtc32k-clock: a subnode with zero clock cells for the 32kHz
-  RTC clock.
-- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
-  with zero clock cells.
-
-Example:
-
-clocks {
-	compatible = "stericsson,u8500-clks";
-	/*
-	 * Registers for the CLKRST block on peripheral
-	 * groups 1, 2, 3, 5, 6,
-	 */
-	reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
-	    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
-	    <0xa03cf000 0x1000>;
-
-	prcmu_clk: prcmu-clock {
-		#clock-cells = <1>;
-	};
-
-	prcc_pclk: prcc-periph-clock {
-		#clock-cells = <2>;
-	};
-
-	prcc_kclk: prcc-kernel-clock {
-		#clock-cells = <2>;
-	};
-
-	rtc_clk: rtc32k-clock {
-		#clock-cells = <0>;
-	};
-
-	smp_twd_clk: smp-twd-clock {
-		#clock-cells = <0>;
-	};
-};

arch/arm/mach-ux500/Kconfig

@@ -29,6 +29,7 @@ menuconfig ARCH_U8500
 	select REGULATOR_DB8500_PRCMU
 	select REGULATOR_FIXED_VOLTAGE
 	select SOC_BUS
+	select RESET_CONTROLLER
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 

drivers/clk/clk.c

@@ -3108,7 +3108,10 @@ static int clk_rate_get(void *data, u64 *val)
 {
 	struct clk_core *core = data;
 
-	*val = core->rate;
+	clk_prepare_lock();
+	*val = clk_core_get_rate_recalc(core);
+	clk_prepare_unlock();
+
 	return 0;
 }
 

drivers/clk/imx/Kconfig

@@ -98,3 +98,10 @@ config CLK_IMX8QXP
 	select MXC_CLK_SCU
 	help
 	  Build the driver for IMX8QXP SCU based clocks.
+
+config CLK_IMX8ULP
+	tristate "IMX8ULP CCM Clock Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select MXC_CLK
+	help
+	    Build the driver for i.MX8ULP CCM Clock Driver

drivers/clk/imx/Makefile

@@ -31,6 +31,8 @@ clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o \
 				     clk-imx8qxp-rsrc.o clk-imx8qm-rsrc.o
 clk-imx-lpcg-scu-$(CONFIG_CLK_IMX8QXP) += clk-lpcg-scu.o clk-imx8qxp-lpcg.o
 
+obj-$(CONFIG_CLK_IMX8ULP) += clk-imx8ulp.o
+
 obj-$(CONFIG_CLK_IMX1)   += clk-imx1.o
 obj-$(CONFIG_CLK_IMX25)  += clk-imx25.o
 obj-$(CONFIG_CLK_IMX27)  += clk-imx27.o

drivers/clk/imx/clk-composite-7ulp.c

@@ -8,6 +8,7 @@
 #include <linux/bits.h>
 #include <linux/clk-provider.h>
 #include <linux/err.h>
+#include <linux/io.h>
 #include <linux/slab.h>
 
 #include "../clk-fractional-divider.h"
@@ -23,17 +24,61 @@
 #define PCG_PCD_WIDTH	3
 #define PCG_PCD_MASK	0x7
 
-struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
+#define SW_RST		BIT(28)
+
+static int pcc_gate_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	unsigned long flags;
+	u32 val;
+	int ret;
+
+	ret = clk_gate_ops.enable(hw);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(gate->lock, flags);
+	/*
+	 * release the sw reset for peripherals associated with
+	 * with this pcc clock.
+	 */
+	val = readl(gate->reg);
+	val |= SW_RST;
+	writel(val, gate->reg);
+
+	spin_unlock_irqrestore(gate->lock, flags);
+
+	return 0;
+}
+
+static void pcc_gate_disable(struct clk_hw *hw)
+{
+	clk_gate_ops.disable(hw);
+}
+
+static int pcc_gate_is_enabled(struct clk_hw *hw)
+{
+	return clk_gate_ops.is_enabled(hw);
+}
+
+static const struct clk_ops pcc_gate_ops = {
+	.enable = pcc_gate_enable,
+	.disable = pcc_gate_disable,
+	.is_enabled = pcc_gate_is_enabled,
+};
+
+static struct clk_hw *imx_ulp_clk_hw_composite(const char *name,
 				     const char * const *parent_names,
 				     int num_parents, bool mux_present,
 				     bool rate_present, bool gate_present,
-				     void __iomem *reg)
+				     void __iomem *reg, bool has_swrst)
 {
 	struct clk_hw *mux_hw = NULL, *fd_hw = NULL, *gate_hw = NULL;
 	struct clk_fractional_divider *fd = NULL;
 	struct clk_gate *gate = NULL;
 	struct clk_mux *mux = NULL;
 	struct clk_hw *hw;
+	u32 val;
 
 	if (mux_present) {
 		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
@@ -43,6 +88,8 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 		mux->reg = reg;
 		mux->shift = PCG_PCS_SHIFT;
 		mux->mask = PCG_PCS_MASK;
+		if (has_swrst)
+			mux->lock = &imx_ccm_lock;
 	}
 
 	if (rate_present) {
@@ -60,6 +107,8 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 		fd->nwidth = PCG_PCD_WIDTH;
 		fd->nmask = PCG_PCD_MASK;
 		fd->flags = CLK_FRAC_DIVIDER_ZERO_BASED;
+		if (has_swrst)
+			fd->lock = &imx_ccm_lock;
 	}
 
 	if (gate_present) {
@@ -72,13 +121,27 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 		gate_hw = &gate->hw;
 		gate->reg = reg;
 		gate->bit_idx = PCG_CGC_SHIFT;
+		if (has_swrst)
+			gate->lock = &imx_ccm_lock;
+		/*
+		 * make sure clock is gated during clock tree initialization,
+		 * the HW ONLY allow clock parent/rate changed with clock gated,
+		 * during clock tree initialization, clocks could be enabled
+		 * by bootloader, so the HW status will mismatch with clock tree
+		 * prepare count, then clock core driver will allow parent/rate
+		 * change since the prepare count is zero, but HW actually
+		 * prevent the parent/rate change due to the clock is enabled.
+		 */
+		val = readl_relaxed(reg);
+		val &= ~(1 << PCG_CGC_SHIFT);
+		writel_relaxed(val, reg);
 	}
 
 	hw = clk_hw_register_composite(NULL, name, parent_names, num_parents,
 				       mux_hw, &clk_mux_ops, fd_hw,
 				       &clk_fractional_divider_ops, gate_hw,
-				       &clk_gate_ops, CLK_SET_RATE_GATE |
-				       CLK_SET_PARENT_GATE);
+				       has_swrst ? &pcc_gate_ops : &clk_gate_ops, CLK_SET_RATE_GATE |
+				       CLK_SET_PARENT_GATE | CLK_SET_RATE_NO_REPARENT);
 	if (IS_ERR(hw)) {
 		kfree(mux);
 		kfree(fd);
@@ -87,3 +150,20 @@ struct clk_hw *imx7ulp_clk_hw_composite(const char *name,
 
 	return hw;
 }
+
+struct clk_hw *imx7ulp_clk_hw_composite(const char *name, const char * const *parent_names,
+				int num_parents, bool mux_present, bool rate_present,
+				bool gate_present, void __iomem *reg)
+{
+	return imx_ulp_clk_hw_composite(name, parent_names, num_parents, mux_present, rate_present,
+					gate_present, reg, false);
+}
+
+struct clk_hw *imx8ulp_clk_hw_composite(const char *name, const char * const *parent_names,
+				int num_parents, bool mux_present, bool rate_present,
+				bool gate_present, void __iomem *reg, bool has_swrst)
+{
+	return imx_ulp_clk_hw_composite(name, parent_names, num_parents, mux_present, rate_present,
+					gate_present, reg, has_swrst);
+}
+EXPORT_SYMBOL_GPL(imx8ulp_clk_hw_composite);

drivers/clk/imx/clk-composite-8m.c

@@ -171,7 +171,7 @@ static const struct clk_ops imx8m_clk_composite_mux_ops = {
 	.determine_rate = imx8m_clk_composite_mux_determine_rate,
 };
 
-struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
+struct clk_hw *__imx8m_clk_hw_composite(const char *name,
 					const char * const *parent_names,
 					int num_parents, void __iomem *reg,
 					u32 composite_flags,
@@ -246,4 +246,4 @@ struct clk_hw *imx8m_clk_hw_composite_flags(const char *name,
 	kfree(mux);
 	return ERR_CAST(hw);
 }
-EXPORT_SYMBOL_GPL(imx8m_clk_hw_composite_flags);
+EXPORT_SYMBOL_GPL(__imx8m_clk_hw_composite);

drivers/clk/imx/clk-imx6ul.c

@@ -161,7 +161,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
-	hws[IMX6UL_CLK_CSI_SEL] = imx_clk_hw_mux_flags("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels), CLK_SET_RATE_PARENT);
 
 	/* Do not bypass PLLs initially */
 	clk_set_parent(hws[IMX6UL_PLL1_BYPASS]->clk, hws[IMX6UL_CLK_PLL1]->clk);
@@ -270,6 +269,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_ECSPI_SEL]	  = imx_clk_hw_mux("ecspi_sel",	base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
 	hws[IMX6UL_CLK_LCDIF_PRE_SEL]	  = imx_clk_hw_mux_flags("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels), CLK_SET_RATE_PARENT);
 	hws[IMX6UL_CLK_LCDIF_SEL]	  = imx_clk_hw_mux("lcdif_sel",	base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+	hws[IMX6UL_CLK_CSI_SEL]		  = imx_clk_hw_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
 
 	hws[IMX6UL_CLK_LDB_DI0_DIV_SEL]  = imx_clk_hw_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
 	hws[IMX6UL_CLK_LDB_DI1_DIV_SEL]  = imx_clk_hw_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
@@ -380,7 +380,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 		hws[IMX6ULL_CLK_ESAI_IPG]	= imx_clk_hw_gate2_shared("esai_ipg",	"ahb",		base + 0x70,	0, &share_count_esai);
 		hws[IMX6ULL_CLK_ESAI_MEM]	= imx_clk_hw_gate2_shared("esai_mem",	"ahb",		base + 0x70,	0, &share_count_esai);
 	}
-	hws[IMX6UL_CLK_CSI]		= imx_clk_hw_gate2("csi",		"csi_podf",		base + 0x70,	2);
 	hws[IMX6UL_CLK_I2C1]		= imx_clk_hw_gate2("i2c1",		"perclk",	base + 0x70,	6);
 	hws[IMX6UL_CLK_I2C2]		= imx_clk_hw_gate2("i2c2",		"perclk",	base + 0x70,	8);
 	hws[IMX6UL_CLK_I2C3]		= imx_clk_hw_gate2("i2c3",		"perclk",	base + 0x70,	10);
@@ -391,6 +390,12 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	hws[IMX6UL_CLK_PXP]		= imx_clk_hw_gate2("pxp",		"axi",		base + 0x70,	30);
 
 	/* CCGR3 */
+	/*
+	 * Although the imx6ull reference manual lists CCGR2 as the csi clk
+	 * gate register, tests have shown that it is actually the CCGR3
+	 * register bit 0/1, same as for the imx6ul.
+	 */
+	hws[IMX6UL_CLK_CSI]		= imx_clk_hw_gate2("csi",	"csi_podf",	base + 0x74,	0);
 	hws[IMX6UL_CLK_UART5_IPG]	= imx_clk_hw_gate2("uart5_ipg",	"ipg",		base + 0x74,	2);
 	hws[IMX6UL_CLK_UART5_SERIAL]	= imx_clk_hw_gate2("uart5_serial",	"uart_podf",	base + 0x74,	2);
 	if (clk_on_imx6ul()) {

drivers/clk/imx/clk-imx7ulp.c

@@ -78,20 +78,20 @@ static void __init imx7ulp_clk_scg1_init(struct device_node *np)
 	hws[IMX7ULP_CLK_SPLL_PRE_DIV]	= imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608,	8,	3,	CLK_SET_RATE_GATE);
 
 	/*						name	 parent_name	 base */
-	hws[IMX7ULP_CLK_APLL]		= imx_clk_hw_pllv4("apll",  "apll_pre_div", base + 0x500);
-	hws[IMX7ULP_CLK_SPLL]		= imx_clk_hw_pllv4("spll",  "spll_pre_div", base + 0x600);
+	hws[IMX7ULP_CLK_APLL]		= imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "apll",  "apll_pre_div", base + 0x500);
+	hws[IMX7ULP_CLK_SPLL]		= imx_clk_hw_pllv4(IMX_PLLV4_IMX7ULP, "spll",  "spll_pre_div", base + 0x600);
 
 	/* APLL PFDs */
-	hws[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_hw_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
-	hws[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_hw_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
-	hws[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_hw_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
-	hws[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_hw_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
+	hws[IMX7ULP_CLK_APLL_PFD0]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd0", "apll", base + 0x50c, 0);
+	hws[IMX7ULP_CLK_APLL_PFD1]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd1", "apll", base + 0x50c, 1);
+	hws[IMX7ULP_CLK_APLL_PFD2]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd2", "apll", base + 0x50c, 2);
+	hws[IMX7ULP_CLK_APLL_PFD3]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "apll_pfd3", "apll", base + 0x50c, 3);
 
 	/* SPLL PFDs */
-	hws[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_hw_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
-	hws[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_hw_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
-	hws[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_hw_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
-	hws[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_hw_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
+	hws[IMX7ULP_CLK_SPLL_PFD0]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd0", "spll", base + 0x60C, 0);
+	hws[IMX7ULP_CLK_SPLL_PFD1]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd1", "spll", base + 0x60C, 1);
+	hws[IMX7ULP_CLK_SPLL_PFD2]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd2", "spll", base + 0x60C, 2);
+	hws[IMX7ULP_CLK_SPLL_PFD3]	= imx_clk_hw_pfdv2(IMX_PFDV2_IMX7ULP, "spll_pfd3", "spll", base + 0x60C, 3);
 
 	/* PLL Mux */
 	hws[IMX7ULP_CLK_APLL_PFD_SEL]	= imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);

drivers/clk/imx/clk-pfdv2.c

@@ -161,8 +161,17 @@ static int clk_pfdv2_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!rate)
 		return -EINVAL;
 
-	/* PFD can NOT change rate without gating */
-	WARN_ON(clk_pfdv2_is_enabled(hw));
+	/*
+	 * PFD can NOT change rate without gating.
+	 * as the PFDs may enabled in HW by default but no
+	 * consumer used it, the enable count is '0', so the
+	 * 'SET_RATE_GATE' can NOT help on blocking the set_rate
+	 * ops especially for 'assigned-clock-xxx'. In order
+	 * to simplify the case, just disable the PFD if it is
+	 * enabled in HW but not in SW.
+	 */
+	if (clk_pfdv2_is_enabled(hw))
+		clk_pfdv2_disable(hw);
 
 	tmp = tmp * 18 + rate / 2;
 	do_div(tmp, rate);
@@ -191,8 +200,8 @@ static const struct clk_ops clk_pfdv2_ops = {
 	.is_enabled     = clk_pfdv2_is_enabled,
 };
 
-struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
-			     void __iomem *reg, u8 idx)
+struct clk_hw *imx_clk_hw_pfdv2(enum imx_pfdv2_type type, const char *name,
+			     const char *parent_name, void __iomem *reg, u8 idx)
 {
 	struct clk_init_data init;
 	struct clk_pfdv2 *pfd;
@@ -214,7 +223,10 @@ struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
 	init.ops = &clk_pfdv2_ops;
 	init.parent_names = &parent_name;
 	init.num_parents = 1;
+	if (type == IMX_PFDV2_IMX7ULP)
 		init.flags = CLK_SET_RATE_GATE | CLK_SET_RATE_PARENT;
+	else
+		init.flags = CLK_SET_RATE_GATE;
 
 	pfd->hw.init = &init;
 
@@ -227,3 +239,4 @@ struct clk_hw *imx_clk_hw_pfdv2(const char *name, const char *parent_name,
 
 	return hw;
 }
+EXPORT_SYMBOL_GPL(imx_clk_hw_pfdv2);

drivers/clk/imx/clk-pllv4.c

@@ -23,14 +23,17 @@
 
 /* PLL Configuration Register (xPLLCFG) */
 #define PLL_CFG_OFFSET		0x08
+#define IMX8ULP_PLL_CFG_OFFSET	0x10
 #define BP_PLL_MULT		16
 #define BM_PLL_MULT		(0x7f << 16)
 
 /* PLL Numerator Register (xPLLNUM) */
 #define PLL_NUM_OFFSET		0x10
+#define IMX8ULP_PLL_NUM_OFFSET	0x1c
 
 /* PLL Denominator Register (xPLLDENOM) */
 #define PLL_DENOM_OFFSET	0x14
+#define IMX8ULP_PLL_DENOM_OFFSET	0x18
 
 #define MAX_MFD			0x3fffffff
 #define DEFAULT_MFD		1000000
@@ -38,6 +41,9 @@
 struct clk_pllv4 {
 	struct clk_hw	hw;
 	void __iomem	*base;
+	u32		cfg_offset;
+	u32		num_offset;
+	u32		denom_offset;
 };
 
 /* Valid PLL MULT Table */
@@ -72,12 +78,12 @@ static unsigned long clk_pllv4_recalc_rate(struct clk_hw *hw,
 	u32 mult, mfn, mfd;
 	u64 temp64;
 
-	mult = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	mult = readl_relaxed(pll->base + pll->cfg_offset);
 	mult &= BM_PLL_MULT;
 	mult >>= BP_PLL_MULT;
 
-	mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
-	mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+	mfn = readl_relaxed(pll->base + pll->num_offset);
+	mfd = readl_relaxed(pll->base + pll->denom_offset);
 	temp64 = parent_rate;
 	temp64 *= mfn;
 	do_div(temp64, mfd);
@@ -165,13 +171,13 @@ static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate,
 	do_div(temp64, parent_rate);
 	mfn = temp64;
 
-	val = readl_relaxed(pll->base + PLL_CFG_OFFSET);
+	val = readl_relaxed(pll->base + pll->cfg_offset);
 	val &= ~BM_PLL_MULT;
 	val |= mult << BP_PLL_MULT;
-	writel_relaxed(val, pll->base + PLL_CFG_OFFSET);
+	writel_relaxed(val, pll->base + pll->cfg_offset);
 
-	writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
-	writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+	writel_relaxed(mfn, pll->base + pll->num_offset);
+	writel_relaxed(mfd, pll->base + pll->denom_offset);
 
 	return 0;
 }
@@ -207,8 +213,8 @@ static const struct clk_ops clk_pllv4_ops = {
 	.is_prepared	= clk_pllv4_is_prepared,
 };
 
-struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
-			  void __iomem *base)
+struct clk_hw *imx_clk_hw_pllv4(enum imx_pllv4_type type, const char *name,
+		 const char *parent_name, void __iomem *base)
 {
 	struct clk_pllv4 *pll;
 	struct clk_hw *hw;
@@ -221,6 +227,16 @@ struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
 
 	pll->base = base;
 
+	if (type == IMX_PLLV4_IMX8ULP) {
+		pll->cfg_offset = IMX8ULP_PLL_CFG_OFFSET;
+		pll->num_offset = IMX8ULP_PLL_NUM_OFFSET;
+		pll->denom_offset = IMX8ULP_PLL_DENOM_OFFSET;
+	} else {
+		pll->cfg_offset = PLL_CFG_OFFSET;
+		pll->num_offset = PLL_NUM_OFFSET;
+		pll->denom_offset = PLL_DENOM_OFFSET;
+	}
+
 	init.name = name;
 	init.ops = &clk_pllv4_ops;
 	init.parent_names = &parent_name;
@@ -238,3 +254,4 @@ struct clk_hw *imx_clk_hw_pllv4(const char *name, const char *parent_name,
 
 	return hw;
 }
+EXPORT_SYMBOL_GPL(imx_clk_hw_pllv4);

drivers/clk/ux500/Makefile

@@ -8,6 +8,9 @@ obj-y += clk-prcc.o
 obj-y += clk-prcmu.o
 obj-y += clk-sysctrl.o
 
+# Reset control
+obj-y += reset-prcc.o
+
 # Clock definitions
 obj-y += u8500_of_clk.o
 

drivers/clk/ux500/prcc.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __PRCC_H
+#define __PRCC_H
+
+#define PRCC_NUM_PERIPH_CLUSTERS 6
+#define PRCC_PERIPHS_PER_CLUSTER 32
+
+/* CLKRST4 is missing making it hard to index things */
+enum clkrst_index {
+	CLKRST1_INDEX = 0,
+	CLKRST2_INDEX,
+	CLKRST3_INDEX,
+	CLKRST5_INDEX,
+	CLKRST6_INDEX,
+	CLKRST_MAX,
+};
+
+#endif

drivers/clk/ux500/reset-prcc.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Reset controller portions for the U8500 PRCC
+ * Copyright (C) 2021 Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/reset-controller.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+
+#include "prcc.h"
+#include "reset-prcc.h"
+
+#define to_u8500_prcc_reset(p) container_of((p), struct u8500_prcc_reset, rcdev)
+
+/* This macro flattens the 2-dimensional PRCC numberspace */
+#define PRCC_RESET_LINE(prcc_num, bit) \
+	(((prcc_num) * PRCC_PERIPHS_PER_CLUSTER) + (bit))
+
+/*
+ * Reset registers in each PRCC - the reset lines are active low
+ * so what you need to do is write a bit for the peripheral you
+ * want to put into reset into the CLEAR register, this will assert
+ * the reset by pulling the line low. SET take the device out of
+ * reset. The status reflects the actual state of the line.
+ */
+#define PRCC_K_SOFTRST_SET		0x018
+#define PRCC_K_SOFTRST_CLEAR		0x01c
+#define PRCC_K_RST_STATUS		0x020
+
+static int prcc_num_to_index(unsigned int num)
+{
+	switch (num) {
+	case 1:
+		return CLKRST1_INDEX;
+	case 2:
+		return CLKRST2_INDEX;
+	case 3:
+		return CLKRST3_INDEX;
+	case 5:
+		return CLKRST5_INDEX;
+	case 6:
+		return CLKRST6_INDEX;
+	}
+	return -EINVAL;
+}
+
+static void __iomem *u8500_prcc_reset_base(struct u8500_prcc_reset *ur,
+					   unsigned long id)
+{
+	unsigned int prcc_num, index;
+
+	prcc_num = id / PRCC_PERIPHS_PER_CLUSTER;
+	index = prcc_num_to_index(prcc_num);
+
+	if (index > ARRAY_SIZE(ur->base))
+		return NULL;
+
+	return ur->base[index];
+}
+
+static int u8500_prcc_reset(struct reset_controller_dev *rcdev,
+			    unsigned long id)
+{
+	struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
+	void __iomem *base = u8500_prcc_reset_base(ur, id);
+	unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
+
+	pr_debug("PRCC cycle reset id %lu, bit %u\n", id, bit);
+
+	/*
+	 * Assert reset and then release it. The one microsecond
+	 * delay is found in the vendor reference code.
+	 */
+	writel(BIT(bit), base + PRCC_K_SOFTRST_CLEAR);
+	udelay(1);
+	writel(BIT(bit), base + PRCC_K_SOFTRST_SET);
+	udelay(1);
+
+	return 0;
+}
+
+static int u8500_prcc_reset_assert(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
+	void __iomem *base = u8500_prcc_reset_base(ur, id);
+	unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
+
+	pr_debug("PRCC assert reset id %lu, bit %u\n", id, bit);
+	writel(BIT(bit), base + PRCC_K_SOFTRST_CLEAR);
+
+	return 0;
+}
+
+static int u8500_prcc_reset_deassert(struct reset_controller_dev *rcdev,
+				     unsigned long id)
+{
+	struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
+	void __iomem *base = u8500_prcc_reset_base(ur, id);
+	unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
+
+	pr_debug("PRCC deassert reset id %lu, bit %u\n", id, bit);
+	writel(BIT(bit), base + PRCC_K_SOFTRST_SET);
+
+	return 0;
+}
+
+static int u8500_prcc_reset_status(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
+	void __iomem *base = u8500_prcc_reset_base(ur, id);
+	unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
+	u32 val;
+
+	pr_debug("PRCC check status on reset line id %lu, bit %u\n", id, bit);
+	val = readl(base + PRCC_K_RST_STATUS);
+
+	/* Active low so return the inverse value of the bit */
+	return !(val & BIT(bit));
+}
+
+static const struct reset_control_ops u8500_prcc_reset_ops = {
+	.reset = u8500_prcc_reset,
+	.assert = u8500_prcc_reset_assert,
+	.deassert = u8500_prcc_reset_deassert,
+	.status = u8500_prcc_reset_status,
+};
+
+static int u8500_prcc_reset_xlate(struct reset_controller_dev *rcdev,
+				  const struct of_phandle_args *reset_spec)
+{
+	unsigned int prcc_num, bit;
+
+	if (reset_spec->args_count != 2)
+		return -EINVAL;
+
+	prcc_num = reset_spec->args[0];
+	bit = reset_spec->args[1];
+
+	if (prcc_num != 1 && prcc_num != 2 && prcc_num != 3 &&
+	    prcc_num != 5 && prcc_num != 6) {
+		pr_err("%s: invalid PRCC %d\n", __func__, prcc_num);
+		return -EINVAL;
+	}
+
+	pr_debug("located reset line %d at PRCC %d bit %d\n",
+		 PRCC_RESET_LINE(prcc_num, bit), prcc_num, bit);
+
+	return PRCC_RESET_LINE(prcc_num, bit);
+}
+
+void u8500_prcc_reset_init(struct device_node *np, struct u8500_prcc_reset *ur)
+{
+	struct reset_controller_dev *rcdev = &ur->rcdev;
+	int ret;
+	int i;
+
+	for (i = 0; i < CLKRST_MAX; i++) {
+		ur->base[i] = ioremap(ur->phy_base[i], SZ_4K);
+		if (!ur->base[i])
+			pr_err("PRCC failed to remap for reset base %d (%08x)\n",
+			       i, ur->phy_base[i]);
+	}
+
+	rcdev->owner = THIS_MODULE;
+	rcdev->ops = &u8500_prcc_reset_ops;
+	rcdev->of_node = np;
+	rcdev->of_reset_n_cells = 2;
+	rcdev->of_xlate = u8500_prcc_reset_xlate;
+
+	ret = reset_controller_register(rcdev);
+	if (ret)
+		pr_err("PRCC failed to register reset controller\n");
+}

drivers/clk/ux500/reset-prcc.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __RESET_PRCC_H
+#define __RESET_PRCC_H
+
+#include <linux/reset-controller.h>
+#include <linux/io.h>
+
+/**
+ * struct u8500_prcc_reset - U8500 PRCC reset controller state
+ * @rcdev: reset controller device
+ * @phy_base: the physical base address for each PRCC block
+ * @base: the remapped PRCC bases
+ */
+struct u8500_prcc_reset {
+	struct reset_controller_dev rcdev;
+	u32 phy_base[CLKRST_MAX];
+	void __iomem *base[CLKRST_MAX];
+};
+
+void u8500_prcc_reset_init(struct device_node *np, struct u8500_prcc_reset *ur);
+
+#endif

drivers/clk/ux500/u8500_of_clk.c

@@ -10,10 +10,10 @@
 #include <linux/of_address.h>
 #include <linux/clk-provider.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include "clk.h"
 
-#define PRCC_NUM_PERIPH_CLUSTERS 6
-#define PRCC_PERIPHS_PER_CLUSTER 32
+#include "clk.h"
+#include "prcc.h"
+#include "reset-prcc.h"
 
 static struct clk *prcmu_clk[PRCMU_NUM_CLKS];
 static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
@@ -46,16 +46,6 @@ static struct clk *ux500_twocell_get(struct of_phandle_args *clkspec,
 	return PRCC_SHOW(clk_data, base, bit);
 }
 
-/* CLKRST4 is missing making it hard to index things */
-enum clkrst_index {
-	CLKRST1_INDEX = 0,
-	CLKRST2_INDEX,
-	CLKRST3_INDEX,
-	CLKRST5_INDEX,
-	CLKRST6_INDEX,
-	CLKRST_MAX,
-};
-
 static void u8500_clk_init(struct device_node *np)
 {
 	struct prcmu_fw_version *fw_version;
@@ -63,8 +53,18 @@ static void u8500_clk_init(struct device_node *np)
 	const char *sgaclk_parent = NULL;
 	struct clk *clk, *rtc_clk, *twd_clk;
 	u32 bases[CLKRST_MAX];
+	struct u8500_prcc_reset *rstc;
 	int i;
 
+	/*
+	 * We allocate the reset controller here so that we can fill in the
+	 * base addresses properly and pass to the reset controller init
+	 * function later on.
+	 */
+	rstc = kzalloc(sizeof(*rstc), GFP_KERNEL);
+	if (!rstc)
+		return;
+
 	for (i = 0; i < ARRAY_SIZE(bases); i++) {
 		struct resource r;
 
@@ -73,6 +73,7 @@ static void u8500_clk_init(struct device_node *np)
 			pr_err("failed to get CLKRST %d base address\n",
 			       i + 1);
 		bases[i] = r.start;
+		rstc->phy_base[i] = r.start;
 	}
 
 	/* Clock sources */
@@ -563,6 +564,9 @@ static void u8500_clk_init(struct device_node *np)
 
 		if (of_node_name_eq(child, "smp-twd-clock"))
 			of_clk_add_provider(child, of_clk_src_simple_get, twd_clk);
+
+		if (of_node_name_eq(child, "prcc-reset-controller"))
+			u8500_prcc_reset_init(child, rstc);
 	}
 }
 CLK_OF_DECLARE(u8500_clks, "stericsson,u8500-clks", u8500_clk_init);

include/dt-bindings/clock/imx8ulp-clock.h

+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H
+#define __DT_BINDINGS_CLOCK_IMX8ULP_H
+
+#define IMX8ULP_CLK_DUMMY			0
+
+/* CGC1 */
+#define IMX8ULP_CLK_SPLL2			5
+#define IMX8ULP_CLK_SPLL3			6
+#define IMX8ULP_CLK_A35_SEL			7
+#define IMX8ULP_CLK_A35_DIV			8
+#define IMX8ULP_CLK_SPLL2_PRE_SEL		9
+#define IMX8ULP_CLK_SPLL3_PRE_SEL		10
+#define IMX8ULP_CLK_SPLL3_PFD0			11
+#define IMX8ULP_CLK_SPLL3_PFD1			12
+#define IMX8ULP_CLK_SPLL3_PFD2			13
+#define IMX8ULP_CLK_SPLL3_PFD3			14
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV1		15
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV2		16
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV1		17
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV2		18
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV1		19
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV2		20
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV1		21
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV2		22
+#define IMX8ULP_CLK_NIC_SEL			23
+#define IMX8ULP_CLK_NIC_AD_DIVPLAT		24
+#define IMX8ULP_CLK_NIC_PER_DIVPLAT		25
+#define IMX8ULP_CLK_XBAR_SEL			26
+#define IMX8ULP_CLK_XBAR_AD_DIVPLAT		27
+#define IMX8ULP_CLK_XBAR_DIVBUS			28
+#define IMX8ULP_CLK_XBAR_AD_SLOW		29
+#define IMX8ULP_CLK_SOSC_DIV1			30
+#define IMX8ULP_CLK_SOSC_DIV2			31
+#define IMX8ULP_CLK_SOSC_DIV3			32
+#define IMX8ULP_CLK_FROSC_DIV1			33
+#define IMX8ULP_CLK_FROSC_DIV2			34
+#define IMX8ULP_CLK_FROSC_DIV3			35
+#define IMX8ULP_CLK_SPLL3_VCODIV		36
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV1_GATE	37
+#define IMX8ULP_CLK_SPLL3_PFD0_DIV2_GATE	38
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV1_GATE	39
+#define IMX8ULP_CLK_SPLL3_PFD1_DIV2_GATE	40
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV1_GATE	41
+#define IMX8ULP_CLK_SPLL3_PFD2_DIV2_GATE	42
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV1_GATE	43
+#define IMX8ULP_CLK_SPLL3_PFD3_DIV2_GATE	44
+#define IMX8ULP_CLK_SOSC_DIV1_GATE		45
+#define IMX8ULP_CLK_SOSC_DIV2_GATE		46
+#define IMX8ULP_CLK_SOSC_DIV3_GATE		47
+#define IMX8ULP_CLK_FROSC_DIV1_GATE		48
+#define IMX8ULP_CLK_FROSC_DIV2_GATE		49
+#define IMX8ULP_CLK_FROSC_DIV3_GATE		50
+#define IMX8ULP_CLK_SAI4_SEL			51
+#define IMX8ULP_CLK_SAI5_SEL			52
+#define IMX8ULP_CLK_AUD_CLK1			53
+#define IMX8ULP_CLK_ARM				54
+#define IMX8ULP_CLK_ENET_TS_SEL			55
+
+#define IMX8ULP_CLK_CGC1_END			56
+
+/* CGC2 */
+#define IMX8ULP_CLK_PLL4_PRE_SEL	0
+#define IMX8ULP_CLK_PLL4		1
+#define IMX8ULP_CLK_PLL4_VCODIV		2
+#define IMX8ULP_CLK_DDR_SEL		3
+#define IMX8ULP_CLK_DDR_DIV		4
+#define IMX8ULP_CLK_LPAV_AXI_SEL	5
+#define IMX8ULP_CLK_LPAV_AXI_DIV	6
+#define IMX8ULP_CLK_LPAV_AHB_DIV	7
+#define IMX8ULP_CLK_LPAV_BUS_DIV	8
+#define IMX8ULP_CLK_PLL4_PFD0		9
+#define IMX8ULP_CLK_PLL4_PFD1		10
+#define IMX8ULP_CLK_PLL4_PFD2		11
+#define IMX8ULP_CLK_PLL4_PFD3		12
+#define IMX8ULP_CLK_PLL4_PFD0_DIV1_GATE	13
+#define IMX8ULP_CLK_PLL4_PFD0_DIV2_GATE	14
+#define IMX8ULP_CLK_PLL4_PFD1_DIV1_GATE	15
+#define IMX8ULP_CLK_PLL4_PFD1_DIV2_GATE	16
+#define IMX8ULP_CLK_PLL4_PFD2_DIV1_GATE	17
+#define IMX8ULP_CLK_PLL4_PFD2_DIV2_GATE	18
+#define IMX8ULP_CLK_PLL4_PFD3_DIV1_GATE	19
+#define IMX8ULP_CLK_PLL4_PFD3_DIV2_GATE	20
+#define IMX8ULP_CLK_PLL4_PFD0_DIV1	21
+#define IMX8ULP_CLK_PLL4_PFD0_DIV2	22
+#define IMX8ULP_CLK_PLL4_PFD1_DIV1	23
+#define IMX8ULP_CLK_PLL4_PFD1_DIV2	24
+#define IMX8ULP_CLK_PLL4_PFD2_DIV1	25
+#define IMX8ULP_CLK_PLL4_PFD2_DIV2	26
+#define IMX8ULP_CLK_PLL4_PFD3_DIV1	27
+#define IMX8ULP_CLK_PLL4_PFD3_DIV2	28
+#define IMX8ULP_CLK_CGC2_SOSC_DIV1_GATE	29
+#define IMX8ULP_CLK_CGC2_SOSC_DIV2_GATE	30
+#define IMX8ULP_CLK_CGC2_SOSC_DIV3_GATE	31
+#define IMX8ULP_CLK_CGC2_SOSC_DIV1	32
+#define IMX8ULP_CLK_CGC2_SOSC_DIV2	33
+#define IMX8ULP_CLK_CGC2_SOSC_DIV3	34
+#define IMX8ULP_CLK_CGC2_FROSC_DIV1_GATE	35
+#define IMX8ULP_CLK_CGC2_FROSC_DIV2_GATE	36
+#define IMX8ULP_CLK_CGC2_FROSC_DIV3_GATE	37
+#define IMX8ULP_CLK_CGC2_FROSC_DIV1	38
+#define IMX8ULP_CLK_CGC2_FROSC_DIV2	39
+#define IMX8ULP_CLK_CGC2_FROSC_DIV3	40
+#define IMX8ULP_CLK_AUD_CLK2		41
+#define IMX8ULP_CLK_SAI6_SEL		42
+#define IMX8ULP_CLK_SAI7_SEL		43
+#define IMX8ULP_CLK_SPDIF_SEL		44
+#define IMX8ULP_CLK_HIFI_SEL		45
+#define IMX8ULP_CLK_HIFI_DIVCORE	46
+#define IMX8ULP_CLK_HIFI_DIVPLAT	47
+#define IMX8ULP_CLK_DSI_PHY_REF		48
+
+#define IMX8ULP_CLK_CGC2_END		49
+
+/* PCC3 */
+#define IMX8ULP_CLK_WDOG3		0
+#define IMX8ULP_CLK_WDOG4		1
+#define IMX8ULP_CLK_LPIT1		2
+#define IMX8ULP_CLK_TPM4		3
+#define IMX8ULP_CLK_TPM5		4
+#define IMX8ULP_CLK_FLEXIO1		5
+#define IMX8ULP_CLK_I3C2		6
+#define IMX8ULP_CLK_LPI2C4		7
+#define IMX8ULP_CLK_LPI2C5		8
+#define IMX8ULP_CLK_LPUART4		9
+#define IMX8ULP_CLK_LPUART5		10
+#define IMX8ULP_CLK_LPSPI4		11
+#define IMX8ULP_CLK_LPSPI5		12
+#define IMX8ULP_CLK_DMA1_MP		13
+#define IMX8ULP_CLK_DMA1_CH0		14
+#define IMX8ULP_CLK_DMA1_CH1		15
+#define IMX8ULP_CLK_DMA1_CH2		16
+#define IMX8ULP_CLK_DMA1_CH3		17
+#define IMX8ULP_CLK_DMA1_CH4		18
+#define IMX8ULP_CLK_DMA1_CH5		19
+#define IMX8ULP_CLK_DMA1_CH6		20
+#define IMX8ULP_CLK_DMA1_CH7		21
+#define IMX8ULP_CLK_DMA1_CH8		22
+#define IMX8ULP_CLK_DMA1_CH9		23
+#define IMX8ULP_CLK_DMA1_CH10		24
+#define IMX8ULP_CLK_DMA1_CH11		25
+#define IMX8ULP_CLK_DMA1_CH12		26
+#define IMX8ULP_CLK_DMA1_CH13		27
+#define IMX8ULP_CLK_DMA1_CH14		28
+#define IMX8ULP_CLK_DMA1_CH15		29
+#define IMX8ULP_CLK_DMA1_CH16		30
+#define IMX8ULP_CLK_DMA1_CH17		31
+#define IMX8ULP_CLK_DMA1_CH18		32
+#define IMX8ULP_CLK_DMA1_CH19		33
+#define IMX8ULP_CLK_DMA1_CH20		34
+#define IMX8ULP_CLK_DMA1_CH21		35
+#define IMX8ULP_CLK_DMA1_CH22		36
+#define IMX8ULP_CLK_DMA1_CH23		37
+#define IMX8ULP_CLK_DMA1_CH24		38
+#define IMX8ULP_CLK_DMA1_CH25		39
+#define IMX8ULP_CLK_DMA1_CH26		40
+#define IMX8ULP_CLK_DMA1_CH27		41
+#define IMX8ULP_CLK_DMA1_CH28		42
+#define IMX8ULP_CLK_DMA1_CH29		43
+#define IMX8ULP_CLK_DMA1_CH30		44
+#define IMX8ULP_CLK_DMA1_CH31		45
+#define IMX8ULP_CLK_MU3_A		46
+#define IMX8ULP_CLK_MU0_B		47
+
+#define IMX8ULP_CLK_PCC3_END		48
+
+/* PCC4 */
+#define IMX8ULP_CLK_FLEXSPI2		0
+#define IMX8ULP_CLK_TPM6		1
+#define IMX8ULP_CLK_TPM7		2
+#define IMX8ULP_CLK_LPI2C6		3
+#define IMX8ULP_CLK_LPI2C7		4
+#define IMX8ULP_CLK_LPUART6		5
+#define IMX8ULP_CLK_LPUART7		6
+#define IMX8ULP_CLK_SAI4		7
+#define IMX8ULP_CLK_SAI5		8
+#define IMX8ULP_CLK_PCTLE		9
+#define IMX8ULP_CLK_PCTLF		10
+#define IMX8ULP_CLK_USDHC0		11
+#define IMX8ULP_CLK_USDHC1		12
+#define IMX8ULP_CLK_USDHC2		13
+#define IMX8ULP_CLK_USB0		14
+#define IMX8ULP_CLK_USB0_PHY		15
+#define IMX8ULP_CLK_USB1		16
+#define IMX8ULP_CLK_USB1_PHY		17
+#define IMX8ULP_CLK_USB_XBAR		18
+#define IMX8ULP_CLK_ENET		19
+#define IMX8ULP_CLK_SFA1		20
+#define IMX8ULP_CLK_RGPIOE		21
+#define IMX8ULP_CLK_RGPIOF		22
+
+#define IMX8ULP_CLK_PCC4_END		23
+
+/* PCC5 */
+#define IMX8ULP_CLK_TPM8		0
+#define IMX8ULP_CLK_SAI6		1
+#define IMX8ULP_CLK_SAI7		2
+#define IMX8ULP_CLK_SPDIF		3
+#define IMX8ULP_CLK_ISI			4
+#define IMX8ULP_CLK_CSI_REGS 		5
+#define IMX8ULP_CLK_PCTLD		6
+#define IMX8ULP_CLK_CSI			7
+#define IMX8ULP_CLK_DSI			8
+#define IMX8ULP_CLK_WDOG5		9
+#define IMX8ULP_CLK_EPDC		10
+#define IMX8ULP_CLK_PXP			11
+#define IMX8ULP_CLK_SFA2		12
+#define IMX8ULP_CLK_GPU2D		13
+#define IMX8ULP_CLK_GPU3D		14
+#define IMX8ULP_CLK_DC_NANO		15
+#define IMX8ULP_CLK_CSI_CLK_UI 		16
+#define IMX8ULP_CLK_CSI_CLK_ESC		17
+#define IMX8ULP_CLK_RGPIOD		18
+#define IMX8ULP_CLK_DMA2_MP		19
+#define IMX8ULP_CLK_DMA2_CH0		20
+#define IMX8ULP_CLK_DMA2_CH1		21
+#define IMX8ULP_CLK_DMA2_CH2		22
+#define IMX8ULP_CLK_DMA2_CH3		23
+#define IMX8ULP_CLK_DMA2_CH4		24
+#define IMX8ULP_CLK_DMA2_CH5		25
+#define IMX8ULP_CLK_DMA2_CH6		26
+#define IMX8ULP_CLK_DMA2_CH7		27
+#define IMX8ULP_CLK_DMA2_CH8		28
+#define IMX8ULP_CLK_DMA2_CH9		29
+#define IMX8ULP_CLK_DMA2_CH10		30
+#define IMX8ULP_CLK_DMA2_CH11		31
+#define IMX8ULP_CLK_DMA2_CH12		32
+#define IMX8ULP_CLK_DMA2_CH13		33
+#define IMX8ULP_CLK_DMA2_CH14		34
+#define IMX8ULP_CLK_DMA2_CH15		35
+#define IMX8ULP_CLK_DMA2_CH16		36
+#define IMX8ULP_CLK_DMA2_CH17		37
+#define IMX8ULP_CLK_DMA2_CH18		38
+#define IMX8ULP_CLK_DMA2_CH19		39
+#define IMX8ULP_CLK_DMA2_CH20		40
+#define IMX8ULP_CLK_DMA2_CH21		41
+#define IMX8ULP_CLK_DMA2_CH22		42
+#define IMX8ULP_CLK_DMA2_CH23		43
+#define IMX8ULP_CLK_DMA2_CH24		44
+#define IMX8ULP_CLK_DMA2_CH25		45
+#define IMX8ULP_CLK_DMA2_CH26		46
+#define IMX8ULP_CLK_DMA2_CH27		47
+#define IMX8ULP_CLK_DMA2_CH28		48
+#define IMX8ULP_CLK_DMA2_CH29		49
+#define IMX8ULP_CLK_DMA2_CH30		50
+#define IMX8ULP_CLK_DMA2_CH31		51
+#define IMX8ULP_CLK_MU2_B		52
+#define IMX8ULP_CLK_MU3_B		53
+#define IMX8ULP_CLK_AVD_SIM		54
+#define IMX8ULP_CLK_DSI_TX_ESC		55
+
+#define IMX8ULP_CLK_PCC5_END		56
+
+#endif

include/dt-bindings/reset/imx8ulp-pcc-reset.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef DT_BINDING_PCC_RESET_IMX8ULP_H
+#define DT_BINDING_PCC_RESET_IMX8ULP_H
+
+/* PCC3 */
+#define PCC3_WDOG3_SWRST	0
+#define PCC3_WDOG4_SWRST	1
+#define PCC3_LPIT1_SWRST	2
+#define PCC3_TPM4_SWRST		3
+#define PCC3_TPM5_SWRST		4
+#define PCC3_FLEXIO1_SWRST	5
+#define PCC3_I3C2_SWRST		6
+#define PCC3_LPI2C4_SWRST	7
+#define PCC3_LPI2C5_SWRST	8
+#define PCC3_LPUART4_SWRST	9
+#define PCC3_LPUART5_SWRST	10
+#define PCC3_LPSPI4_SWRST	11
+#define PCC3_LPSPI5_SWRST	12
+
+/* PCC4 */
+#define PCC4_FLEXSPI2_SWRST	0
+#define PCC4_TPM6_SWRST		1
+#define PCC4_TPM7_SWRST		2
+#define PCC4_LPI2C6_SWRST	3
+#define PCC4_LPI2C7_SWRST	4
+#define PCC4_LPUART6_SWRST	5
+#define PCC4_LPUART7_SWRST	6
+#define PCC4_SAI4_SWRST		7
+#define PCC4_SAI5_SWRST		8
+#define PCC4_USDHC0_SWRST	9
+#define PCC4_USDHC1_SWRST	10
+#define PCC4_USDHC2_SWRST	11
+#define PCC4_USB0_SWRST		12
+#define PCC4_USB0_PHY_SWRST	13
+#define PCC4_USB1_SWRST		14
+#define PCC4_USB1_PHY_SWRST	15
+#define PCC4_ENET_SWRST		16
+
+/* PCC5 */
+#define PCC5_TPM8_SWRST		0
+#define PCC5_SAI6_SWRST		1
+#define PCC5_SAI7_SWRST		2
+#define PCC5_SPDIF_SWRST	3
+#define PCC5_ISI_SWRST		4
+#define PCC5_CSI_REGS_SWRST	5
+#define PCC5_CSI_SWRST		6
+#define PCC5_DSI_SWRST		7
+#define PCC5_WDOG5_SWRST	8
+#define PCC5_EPDC_SWRST		9
+#define PCC5_PXP_SWRST		10
+#define PCC5_GPU2D_SWRST	11
+#define PCC5_GPU3D_SWRST	12
+#define PCC5_DC_NANO_SWRST	13
+
+#endif /*DT_BINDING_RESET_IMX8ULP_H */

include/dt-bindings/reset/stericsson,db8500-prcc-reset.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_STE_PRCC_RESET
+#define _DT_BINDINGS_STE_PRCC_RESET
+
+#define DB8500_PRCC_1				1
+#define DB8500_PRCC_2				2
+#define DB8500_PRCC_3				3
+#define DB8500_PRCC_6				6
+
+/* Reset lines on PRCC 1 */
+#define DB8500_PRCC_1_RESET_UART0		0
+#define DB8500_PRCC_1_RESET_UART1		1
+#define DB8500_PRCC_1_RESET_I2C1		2
+#define DB8500_PRCC_1_RESET_MSP0		3
+#define DB8500_PRCC_1_RESET_MSP1		4
+#define DB8500_PRCC_1_RESET_SDI0		5
+#define DB8500_PRCC_1_RESET_I2C2		6
+#define DB8500_PRCC_1_RESET_SPI3		7
+#define DB8500_PRCC_1_RESET_SLIMBUS0		8
+#define DB8500_PRCC_1_RESET_I2C4		9
+#define DB8500_PRCC_1_RESET_MSP3		10
+#define DB8500_PRCC_1_RESET_PER_MSP3		11
+#define DB8500_PRCC_1_RESET_PER_MSP1		12
+#define DB8500_PRCC_1_RESET_PER_MSP0		13
+#define DB8500_PRCC_1_RESET_PER_SLIMBUS		14
+
+/* Reset lines on PRCC 2 */
+#define DB8500_PRCC_2_RESET_I2C3		0
+#define DB8500_PRCC_2_RESET_PWL			1
+#define DB8500_PRCC_2_RESET_SDI4		2
+#define DB8500_PRCC_2_RESET_MSP2		3
+#define DB8500_PRCC_2_RESET_SDI1		4
+#define DB8500_PRCC_2_RESET_SDI3		5
+#define DB8500_PRCC_2_RESET_HSIRX		6
+#define DB8500_PRCC_2_RESET_HSITX		7
+#define DB8500_PRCC_1_RESET_PER_MSP2		8
+
+/* Reset lines on PRCC 3 */
+#define DB8500_PRCC_3_RESET_SSP0		1
+#define DB8500_PRCC_3_RESET_SSP1		2
+#define DB8500_PRCC_3_RESET_I2C0		3
+#define DB8500_PRCC_3_RESET_SDI2		4
+#define DB8500_PRCC_3_RESET_SKE			5
+#define DB8500_PRCC_3_RESET_UART2		6
+#define DB8500_PRCC_3_RESET_SDI5		7
+
+/* Reset lines on PRCC 6 */
+#define DB8500_PRCC_3_RESET_RNG			0
+
+#endif