Commit 8dba8f94 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty_port,usb-console: Fix usb serial console open/close regression
  tty: cpm_uart: use resource_size()
  tty_buffer: Fix distinct type warning
  hvc_console: Fix race between hvc_close and hvc_remove
  uartlite: Fix build on sparc.
  tty: Take a 256 byte padding into account when buffering below sub-page units
  Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
parents 2eb645e7 336cee42
......@@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
spin_lock_irqsave(&hp->lock, flags);
/* Check and then increment for fast path open. */
if (hp->count++ > 0) {
tty_kref_get(tty);
spin_unlock_irqrestore(&hp->lock, flags);
hvc_kick();
return 0;
......@@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
tty->driver_data = hp;
hp->tty = tty;
hp->tty = tty_kref_get(tty);
spin_unlock_irqrestore(&hp->lock, flags);
......@@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
spin_lock_irqsave(&hp->lock, flags);
hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
tty_kref_put(tty);
tty->driver_data = NULL;
kref_put(&hp->kref, destroy_hvc_struct);
printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
......@@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
return;
hp = tty->driver_data;
spin_lock_irqsave(&hp->lock, flags);
tty_kref_get(tty);
if (--hp->count == 0) {
/* We are done with the tty pointer now. */
hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
/* Put the ref obtained in hvc_open() */
tty_kref_put(tty);
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
......@@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
spin_unlock_irqrestore(&hp->lock, flags);
}
tty_kref_put(tty);
kref_put(&hp->kref, destroy_hvc_struct);
}
......@@ -428,6 +436,7 @@ static void hvc_hangup(struct tty_struct *tty)
while(temp_open_count) {
--temp_open_count;
tty_kref_put(tty);
kref_put(&hp->kref, destroy_hvc_struct);
}
}
......@@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
}
/* No tty attached, just skip */
tty = hp->tty;
tty = tty_kref_get(hp->tty);
if (tty == NULL)
goto bail;
......@@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
tty_flip_buffer_push(tty);
}
if (tty)
tty_kref_put(tty);
return poll_mask;
}
......@@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
struct tty_struct *tty;
spin_lock_irqsave(&hp->lock, flags);
tty = hp->tty;
tty = tty_kref_get(hp->tty);
if (hp->index < MAX_NR_HVC_CONSOLES)
vtermnos[hp->index] = -1;
......@@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
/*
* We 'put' the instance that was grabbed when the kref instance
* was initialized using kref_init(). Let the last holder of this
* kref cause it to be removed, which will probably be the tty_hangup
* kref cause it to be removed, which will probably be the tty_vhangup
* below.
*/
kref_put(&hp->kref, destroy_hvc_struct);
/*
* This function call will auto chain call hvc_hangup. The tty should
* always be valid at this time unless a simultaneous tty close already
* cleaned up the hvc_struct.
* This function call will auto chain call hvc_hangup.
*/
if (tty)
tty_hangup(tty);
if (tty) {
tty_vhangup(tty);
tty_kref_put(tty);
}
return 0;
}
EXPORT_SYMBOL_GPL(hvc_remove);
......
......@@ -248,7 +248,7 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
{
int copied = 0;
do {
int goal = min(size - copied, TTY_BUFFER_PAGE);
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
......@@ -285,7 +285,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
{
int copied = 0;
do {
int goal = min(size - copied, TTY_BUFFER_PAGE);
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
int space = tty_buffer_request_room(tty, goal);
struct tty_buffer *tb = tty->buf.tail;
/* If there is no space then tb may be NULL */
......
......@@ -119,7 +119,7 @@ EXPORT_SYMBOL(tty_port_tty_set);
static void tty_port_shutdown(struct tty_port *port)
{
mutex_lock(&port->mutex);
if (port->ops->shutdown &&
if (port->ops->shutdown && !port->console &&
test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
port->ops->shutdown(port);
mutex_unlock(&port->mutex);
......
......@@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
ret = -EFAULT;
goto out;
}
if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) {
if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
ret = -EINVAL;
goto out;
}
......@@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc)
* telling it that it has acquired. Also check if it has died and
* clean up (similar to logic employed in change_console())
*/
if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
if (vc->vt_mode.mode == VT_PROCESS) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
......@@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc)
* vt to auto control.
*/
vc = vc_cons[fg_console].d;
if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
if (vc->vt_mode.mode == VT_PROCESS) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
......@@ -1693,14 +1693,14 @@ void change_console(struct vc_data *new_vc)
*/
vc->vt_newvt = new_vc->vc_num;
if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
if(vc->vt_mode.mode == VT_PROCESS)
/*
* It worked. Mark the vt to switch to and
* return. The process needs to send us a
* VT_RELDISP ioctl to complete the switch.
*/
return;
} else {
}
/*
* The controlling process has died, so we revert back to
* normal operation. In this case, we'll also change back
......@@ -1711,10 +1711,9 @@ void change_console(struct vc_data *new_vc)
* to account for and tracking tty count may be undesirable.
*/
reset_vc(vc);
}
/*
* Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch...
* Fall through to normal (VT_AUTO) handling of the switch...
*/
}
......
......@@ -61,7 +61,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
void __iomem *pram;
unsigned long offset;
struct resource res;
unsigned long len;
resource_size_t len;
/* Don't remap parameter RAM if it has already been initialized
* during console setup.
......@@ -74,7 +74,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
if (of_address_to_resource(np, 1, &res))
return NULL;
len = 1 + res.end - res.start;
len = resource_size(&res);
pram = ioremap(res.start, len);
if (!pram)
return NULL;
......
......@@ -181,6 +181,7 @@ static int usb_console_setup(struct console *co, char *options)
/* The console is special in terms of closing the device so
* indicate this port is now acting as a system console. */
port->console = 1;
port->port.console = 1;
mutex_unlock(&serial->disc_mutex);
return retval;
......
......@@ -70,12 +70,13 @@ struct tty_buffer {
/*
* We default to dicing tty buffer allocations to this many characters
* in order to avoid multiple page allocations. We assume tty_buffer itself
* is under 256 bytes. See tty_buffer_find for the allocation logic this
* must match
* in order to avoid multiple page allocations. We know the size of
* tty_buffer itself but it must also be taken into account that the
* the buffer is 256 byte aligned. See tty_buffer_find for the allocation
* logic this must match
*/
#define TTY_BUFFER_PAGE ((PAGE_SIZE - 256) / 2)
#define TTY_BUFFER_PAGE (((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
struct tty_bufhead {
......@@ -223,6 +224,7 @@ struct tty_port {
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
unsigned char console:1; /* port is a console */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
unsigned char *xmit_buf; /* Optional buffer */
......
......@@ -27,7 +27,7 @@ struct vt_mode {
#define VT_SETMODE 0x5602 /* set mode of active vt */
#define VT_AUTO 0x00 /* auto vt switching */
#define VT_PROCESS 0x01 /* process controls switching */
#define VT_PROCESS_AUTO 0x02 /* process is notified of switching */
#define VT_ACKACQ 0x02 /* acknowledge switch */
struct vt_stat {
unsigned short v_active; /* active vt */
......@@ -38,7 +38,6 @@ struct vt_stat {
#define VT_SENDSIG 0x5604 /* signal to send to bitmask of vts */
#define VT_RELDISP 0x5605 /* release display */
#define VT_ACKACQ 0x02 /* acknowledge switch */
#define VT_ACTIVATE 0x5606 /* make vt active */
#define VT_WAITACTIVE 0x5607 /* wait for vt active */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment