Commit 8deab114 authored by Mark Mason's avatar Mark Mason Committed by Ralf Baechle

[MIPS] Updated Sibyte headers

This is an update to the earlier patch for the sibyte headers, and superceeds
the previous patch.  Changes were necessary to get the tbprof driver working
on the bcm1480.

Patch to update Sibyte header files to match master versions maintained
at Broadcom.  This patch also corrects some whitespace problems, and
(hopefully) shouldn't introduce any new ones.
Signed-off-by: default avatarMark Mason <mason@broadcom.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent eacb9d61
......@@ -157,6 +157,7 @@
* Mask values for each interrupt
*/
#define _BCM1480_INT_MASK(w,n) _SB_MAKEMASK(w,((n) & 0x3F))
#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F))
#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6)
......@@ -195,6 +196,7 @@
#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8,K_BCM1480_INT_MBOX_0_0)
#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
......
......@@ -382,6 +382,10 @@
#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10)
#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11)
#define M_BCM1480_MC_CS _SB_MAKEMASK(8,S_BCM1480_MC_CS0)
#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0)
#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0,M_BCM1480_MC_CS0)
#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16)
/*
......@@ -412,6 +416,8 @@
#define K_BCM1480_MC_DRAM_TYPE_DDR2 2
#endif
#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0
#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
......@@ -511,6 +517,22 @@
#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31)
#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32)
#define S_BCM1480_MC_ODT0 0
#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8,S_BCM1480_MC_ODT0)
#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT0)
#define S_BCM1480_MC_ODT2 8
#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8,S_BCM1480_MC_ODT2)
#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT2)
#define S_BCM1480_MC_ODT4 16
#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8,S_BCM1480_MC_ODT4)
#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT4)
#define S_BCM1480_MC_ODT6 24
#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8,S_BCM1480_MC_ODT6)
#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT6)
#endif
/*
......
......@@ -230,6 +230,7 @@
#define A_BCM1480_DUART_IMRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
#define A_BCM1480_DUART_ISRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
#define A_BCM1480_DUART_IN_PORT(chan) (A_BCM1480_DUART(chan) + R_DUART_INP_ORT)
/*
* These constants are the absolute addresses.
......@@ -404,6 +405,21 @@
#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
/*
* these macros work together to build the address of a mailbox
* register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
* for mbox_0_set_cpu2 returns 0x00100240C8
*/
#define R_BCM1480_IMR_MAILBOX_CPU 0x00
#define R_BCM1480_IMR_MAILBOX_SET 0x08
#define R_BCM1480_IMR_MAILBOX_CLR 0x10
#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \
(A_BCM1480_IMR_CPU0_BASE + \
(num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
(cpu * BCM1480_IMR_REGISTER_SPACING) + \
(R_BCM1480_IMR_MAILBOX_0_CPU + reg))
/* *********************************************************************
* System Performance Counter Registers (Section 4.7)
********************************************************************* */
......@@ -428,6 +444,10 @@
#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
#define BCM1480_SCD_NUM_PERF_CNT 8
#define BCM1480_SCD_PERF_CNT_SPACING 8
#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
/* *********************************************************************
* System Bus Watcher Registers (Section 4.8)
********************************************************************* */
......
......@@ -10,7 +10,7 @@
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003
* Copyright 2000,2001,2002,2003,2004,2005
* Broadcom Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
......@@ -78,6 +78,7 @@
#define K_SYS_PART_BCM1280 0x1206
#define K_SYS_PART_BCM1455 0x1407
#define K_SYS_PART_BCM1255 0x1257
#define K_SYS_PART_BCM1158 0x1156
/*
* Manufacturing Information Register (Table 14)
......@@ -237,58 +238,42 @@
* System Performance Counter Configuration Register (Table 31)
* Register: PERF_CNT_CFG_0
*
* Since the clear/enable bits are moved compared to the
* 1250 and there are more fields, this register will be BCM1480 specific.
* SPC_CFG_SRC[0-3] is the same as the 1250.
* SPC_CFG_SRC[4-7] only exist on the 1480
* The clear/enable bits are in different locations on the 1250 and 1480.
*/
#define S_BCM1480_SPC_CFG_SRC0 0
#define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0)
#define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0)
#define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0)
#define S_BCM1480_SPC_CFG_SRC1 8
#define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1)
#define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1)
#define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1)
#define S_BCM1480_SPC_CFG_SRC2 16
#define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2)
#define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2)
#define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2)
#define S_BCM1480_SPC_CFG_SRC3 24
#define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3)
#define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3)
#define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3)
#define S_BCM1480_SPC_CFG_SRC4 32
#define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4)
#define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4)
#define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4)
#define S_BCM1480_SPC_CFG_SRC5 40
#define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5)
#define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5)
#define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5)
#define S_BCM1480_SPC_CFG_SRC6 48
#define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6)
#define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6)
#define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6)
#define S_BCM1480_SPC_CFG_SRC7 56
#define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7)
#define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7)
#define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7)
#define S_SPC_CFG_SRC4 32
#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_SPC_CFG_SRC4)
#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC4)
#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4)
#define S_SPC_CFG_SRC5 40
#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_SPC_CFG_SRC5)
#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC5)
#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5)
#define S_SPC_CFG_SRC6 48
#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_SPC_CFG_SRC6)
#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC6)
#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6)
#define S_SPC_CFG_SRC7 56
#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_SPC_CFG_SRC7)
#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC7)
#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7)
/*
* System Performance Counter Control Register (Table 32)
* Register: PERF_CNT_CFG_1
* BCM1480 specific
*/
#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
#if SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR
#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE
#endif
/*
* System Performance Counters (Table 33)
......@@ -405,20 +390,10 @@
* Trace Control Register (Table 49)
* Register: TRACE_CFG
*
* Bits 0..8 are the same as the BCM1250, rest are different.
* Entire register is redefined below.
* BCM1480 changes to this register (other than location of the CUR_ADDR field)
* are defined below.
*/
#define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
#define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
#define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
#define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3)
#define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4)
#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
#define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8)
#define S_BCM1480_SCD_TRACE_CFG_MODE 16
#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
......@@ -428,9 +403,4 @@
#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24
#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
#endif /* _BCM1480_SCD_H */
/*
* Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
* Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -19,8 +19,8 @@
#ifndef _SIBYTE_BOARD_H
#define _SIBYTE_BOARD_H
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \
defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
defined(CONFIG_SIBYTE_LITTLESUR)
#include <asm/sibyte/swarm.h>
......@@ -55,6 +55,16 @@
#define setleds(t0,t1,c0,c1,c2,c3)
#endif /* LEDS_PHYS */
#else
void swarm_setup(void);
#ifdef LEDS_PHYS
extern void setleds(char *str);
#else
#define setleds(s) do { } while (0)
#endif /* LEDS_PHYS */
#endif /* __ASSEMBLY__ */
#endif /* _SIBYTE_BOARD_H */
......@@ -18,7 +18,6 @@
#ifndef __ASM_SIBYTE_CARMEL_H
#define __ASM_SIBYTE_CARMEL_H
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_int.h>
......
......@@ -45,8 +45,6 @@
* First, the interrupt numbers.
*/
#if SIBYTE_HDR_FEATURE_1250_112x
#define K_INT_SOURCES 64
#define K_INT_WATCHDOG_TIMER_0 0
......@@ -152,6 +150,7 @@
#define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1)
#define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2)
#define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3)
#define M_INT_MBOX_ALL _SB_MAKEMASK(4,K_INT_MBOX_0)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
#define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
......@@ -247,5 +246,3 @@
#endif /* 1250/112x */
#endif
......@@ -129,9 +129,9 @@
#define M_MAC_BYPASS_16 _SB_MAKEMASK1(42)
#define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45)
......@@ -223,9 +223,9 @@
/* XXX: Can't enable, as it has the same name as a pass2+ define below. */
/* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6,S_MAC_TX_WR_THRSH) */
#endif /* up to 1250 PASS1 */
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7,S_MAC_TX_WR_THRSH)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x,S_MAC_TX_WR_THRSH)
#define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x,S_MAC_TX_WR_THRSH,M_MAC_TX_WR_THRSH)
......@@ -234,9 +234,9 @@
/* XXX: Can't enable, as it has the same name as a pass2+ define below. */
/* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6,S_MAC_TX_RD_THRSH) */
#endif /* up to 1250 PASS1 */
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7,S_MAC_TX_RD_THRSH)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x,S_MAC_TX_RD_THRSH)
#define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x,S_MAC_TX_RD_THRSH,M_MAC_TX_RD_THRSH)
......@@ -260,12 +260,12 @@
#define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x,S_MAC_RX_RL_THRSH)
#define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x,S_MAC_RX_RL_THRSH,M_MAC_RX_RL_THRSH)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_ENC_FC_THRSH _SB_MAKE64(56)
#define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6,S_MAC_ENC_FC_THRSH)
#define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x,S_MAC_ENC_FC_THRSH)
#define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x,S_MAC_ENC_FC_THRSH,M_MAC_ENC_FC_THRSH)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/*
* MAC Frame Configuration Registers (Table 9-15)
......@@ -462,9 +462,9 @@
#define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44)
#define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45)
#define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_MAC_COUNTER_ADDR _SB_MAKE64(47)
#define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5,S_MAC_COUNTER_ADDR)
......@@ -598,9 +598,9 @@
#define M_MAC_MCAST_INV _SB_MAKEMASK1(4)
#define M_MAC_BCAST_EN _SB_MAKEMASK1(5)
#define M_MAC_DIRECT_INV _SB_MAKEMASK1(6)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_MAC_IPHDR_OFFSET _SB_MAKE64(8)
#define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8,S_MAC_IPHDR_OFFSET)
......
......@@ -295,7 +295,7 @@
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36)
#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(38)
#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37)
#endif /* 1250 PASS3 || 112x PASS1 */
......
......@@ -131,6 +131,7 @@
#endif
/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
......@@ -239,14 +240,14 @@
#define R_MAC_VLANTAG 0x00000110
#define R_MAC_FRAMECFG 0x00000118
#define R_MAC_EOPCNT 0x00000120
#define R_MAC_FIFO_PTRS 0x00000130
#define R_MAC_FIFO_PTRS 0x00000128
#define R_MAC_ADFILTER_CFG 0x00000200
#define R_MAC_ETHERNET_ADDR 0x00000208
#define R_MAC_PKT_TYPE 0x00000210
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define R_MAC_ADMASK0 0x00000218
#define R_MAC_ADMASK1 0x00000220
#endif /* 1250 PASS3 || 112x PASS1 */
#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define R_MAC_HASH_BASE 0x00000240
#define R_MAC_ADDR_BASE 0x00000280
#define R_MAC_CHLO0_BASE 0x00000300
......@@ -256,9 +257,9 @@
#define R_MAC_INT_MASK 0x00000410
#define R_MAC_TXD_CTL 0x00000420
#define R_MAC_MDIO 0x00000428
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define R_MAC_STATUS1 0x00000430
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define R_MAC_DEBUG_STATUS 0x00000448
#define MAC_HASH_COUNT 8
......@@ -289,11 +290,11 @@
#define R_DUART_RX_HOLD 0x160
#define R_DUART_TX_HOLD 0x170
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define R_DUART_FULL_CTL 0x140
#define R_DUART_OPCR_X 0x180
#define R_DUART_AUXCTL_X 0x190
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
/*
......@@ -308,6 +309,7 @@
#define R_DUART_IMR_B 0x350
#define R_DUART_OUT_PORT 0x360
#define R_DUART_OPCR 0x370
#define R_DUART_IN_PORT 0x380
#define R_DUART_SET_OPR 0x3B0
#define R_DUART_CLEAR_OPR 0x3C0
......@@ -685,12 +687,17 @@
#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define ADDR_TRAP_SPACING 8
#define NUM_ADDR_TRAP 4
#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
#if SIBYTE_HDR_FEATURE_1250_112x
#define A_IMR_CPU0_BASE 0x0010020000
#define A_IMR_CPU1_BASE 0x0010022000
#define IMR_REGISTER_SPACING 0x2000
......@@ -700,6 +707,7 @@
#define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg))
#define R_IMR_INTERRUPT_DIAG 0x0010
#define R_IMR_INTERRUPT_LDT 0x0018
#define R_IMR_INTERRUPT_MASK 0x0028
#define R_IMR_INTERRUPT_TRACE 0x0038
#define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040
......@@ -715,7 +723,14 @@
#define R_IMR_INTERRUPT_STATUS_COUNT 7
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
#endif /* 1250/112x */
/*
* these macros work together to build the address of a mailbox
* register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
* for mbox_0_set_cpu2 returns 0x00100240C8
*/
#define A_MAILBOX_REGISTER(reg,cpu) \
(A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
/* *********************************************************************
* System Performance Counter Registers
......@@ -727,6 +742,10 @@
#define A_SCD_PERF_CNT_2 0x00100204E0
#define A_SCD_PERF_CNT_3 0x00100204E8
#define SCD_NUM_PERF_CNT 4
#define SCD_PERF_CNT_SPACING 8
#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
/* *********************************************************************
* System Bus Watcher Registers
********************************************************************* */
......@@ -772,6 +791,15 @@
#define A_SCD_TRACE_SEQUENCE_6 0x0010020A90
#define A_SCD_TRACE_SEQUENCE_7 0x0010020A98
#define TRACE_REGISTER_SPACING 8
#define TRACE_NUM_REGISTERS 8
#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
(A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
(A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
(A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
(A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
/* *********************************************************************
* System Generic DMA Registers
********************************************************************* */
......
......@@ -10,7 +10,7 @@
*
*********************************************************************
*
* Copyright 2000,2001,2002,2003
* Copyright 2000,2001,2002,2003,2004,2005
* Broadcom Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
......@@ -150,7 +150,7 @@
* (For the assembler version, sysrev and dest may be the same register.
* Also, it clobbers AT.)
*/
#ifdef __ASSEMBLY__
#ifdef __ASSEMBLER__
#define SYS_SOC_TYPE(dest, sysrev) \
.set push ; \
.set reorder ; \
......@@ -214,6 +214,7 @@
#define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
#endif
/*
* System Config Register (Table 4-2)
* Register: SCD_SYSTEM_CFG
......@@ -360,13 +361,13 @@
*/
#define V_SCD_TIMER_FREQ 1000000
#define V_SCD_TIMER_WIDTH 23
#define S_SCD_TIMER_INIT 0
#define M_SCD_TIMER_INIT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
#define M_SCD_TIMER_INIT _SB_MAKEMASK(23,S_SCD_TIMER_INIT)
#define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
#define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
#define V_SCD_TIMER_WIDTH 23
#define S_SCD_TIMER_CNT 0
#define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
#define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
......@@ -380,7 +381,6 @@
* System Performance Counters
*/
#if SIBYTE_HDR_FEATURE_1250_112x
#define S_SPC_CFG_SRC0 0
#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
......@@ -401,6 +401,7 @@
#define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC3)
#define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_SPC_CFG_SRC3,M_SPC_CFG_SRC3)
#if SIBYTE_HDR_FEATURE_1250_112x
#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32)
#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33)
#endif
......@@ -516,8 +517,6 @@
* Trace Buffer Config register
*/
#if SIBYTE_HDR_FEATURE_1250_112x
#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
......@@ -526,17 +525,26 @@
#define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
#define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
#define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8)
#endif /* 1250 PASS2 || 112x PASS1 */
#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/*
* This field is the same on the 1250/112x and 1480, just located in
* a slightly different place in the register.
*/
#if SIBYTE_HDR_FEATURE_1250_112x
#define S_SCD_TRACE_CFG_CUR_ADDR 10
#else
#if SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_SCD_TRACE_CFG_CUR_ADDR 24
#endif /* 1480 */
#endif /* 1250/112x */
#define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_SCD_TRACE_CFG_CUR_ADDR)
#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
#endif /* 1250/112x */
/*
* Trace Event registers
*/
......
......@@ -32,6 +32,18 @@
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_PT1120
#define SIBYTE_BOARD_NAME "PT1120"
#define SIBYTE_HAVE_PCMCIA 1
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_PT1125
#define SIBYTE_BOARD_NAME "PT1125"
#define SIBYTE_HAVE_PCMCIA 1
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_LITTLESUR
#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
#define SIBYTE_HAVE_PCMCIA 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment