Commit 8e3ae37a authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial fixes from Greg KH:
 "Here are 3 serial driver fixes for issues that have been reported.

  Two are reverts, fixing problems that were in the big TTY/Serial
  driver merge in 4.6-rc1, and the last one is a simple bugfix for a
  regression that showed up in 4.6-rc1 as well.

  All have been in linux-next with no reported issues"

* tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: Add hardware dependency to RT288X option"
  tty/serial/8250: fix RS485 half-duplex RX
  Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
parents f9d1e7f3 f077b736
...@@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) ...@@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
/* /*
* Empty the RX FIFO, we are not interested in anything * Empty the RX FIFO, we are not interested in anything
* received during the half-duplex transmission. * received during the half-duplex transmission.
* Enable previously disabled RX interrupts.
*/ */
if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
serial8250_clear_fifos(p); serial8250_clear_fifos(p);
serial8250_rpm_get(p);
p->ier |= UART_IER_RLSI | UART_IER_RDI;
serial_port_out(&p->port, UART_IER, p->ier);
serial8250_rpm_put(p);
}
} }
static void serial8250_em485_handle_stop_tx(unsigned long arg) static void serial8250_em485_handle_stop_tx(unsigned long arg)
......
...@@ -324,7 +324,6 @@ config SERIAL_8250_EM ...@@ -324,7 +324,6 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
depends on SERIAL_8250 depends on SERIAL_8250
depends on MIPS || COMPILE_TEST
default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620 default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
help help
Selecting this option will add support for the alternate register Selecting this option will add support for the alternate register
......
...@@ -72,7 +72,7 @@ static void uartlite_outbe32(u32 val, void __iomem *addr) ...@@ -72,7 +72,7 @@ static void uartlite_outbe32(u32 val, void __iomem *addr)
iowrite32be(val, addr); iowrite32be(val, addr);
} }
static const struct uartlite_reg_ops uartlite_be = { static struct uartlite_reg_ops uartlite_be = {
.in = uartlite_inbe32, .in = uartlite_inbe32,
.out = uartlite_outbe32, .out = uartlite_outbe32,
}; };
...@@ -87,21 +87,21 @@ static void uartlite_outle32(u32 val, void __iomem *addr) ...@@ -87,21 +87,21 @@ static void uartlite_outle32(u32 val, void __iomem *addr)
iowrite32(val, addr); iowrite32(val, addr);
} }
static const struct uartlite_reg_ops uartlite_le = { static struct uartlite_reg_ops uartlite_le = {
.in = uartlite_inle32, .in = uartlite_inle32,
.out = uartlite_outle32, .out = uartlite_outle32,
}; };
static inline u32 uart_in32(u32 offset, struct uart_port *port) static inline u32 uart_in32(u32 offset, struct uart_port *port)
{ {
const struct uartlite_reg_ops *reg_ops = port->private_data; struct uartlite_reg_ops *reg_ops = port->private_data;
return reg_ops->in(port->membase + offset); return reg_ops->in(port->membase + offset);
} }
static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
{ {
const struct uartlite_reg_ops *reg_ops = port->private_data; struct uartlite_reg_ops *reg_ops = port->private_data;
reg_ops->out(val, port->membase + offset); reg_ops->out(val, port->membase + offset);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment