pinctrl: ocelot: fix pinmuxing for pins after 31

[ Upstream commit 4b36082e ]

The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins
is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0],
OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to
facilitate the register offset calculation and use it where necessary.

Fixes: da801ab5 pinctrl: ocelot: add MSCC Jaguar2 support
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/pinctrl/pinctrl-ocelot.c

@@ -396,7 +396,7 @@ static int ocelot_pin_function_idx(struct ocelot_pinctrl *info,
 	return -1;
 }
 
-#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+#define REG_ALT(msb, info, p) (OCELOT_GPIO_ALT0 * (info)->stride + 4 * ((msb) + ((info)->stride * ((p) / 32))))
 
 static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 				 unsigned int selector, unsigned int group)
@@ -412,19 +412,21 @@ static int ocelot_pinmux_set_mux(struct pinctrl_dev *pctldev,
 
 	/*
 	 * f is encoded on two bits.
-	 * bit 0 of f goes in BIT(pin) of ALT0, bit 1 of f goes in BIT(pin) of
-	 * ALT1
+	 * bit 0 of f goes in BIT(pin) of ALT[0], bit 1 of f goes in BIT(pin) of
+	 * ALT[1]
 	 * This is racy because both registers can't be updated at the same time
 	 * but it doesn't matter much for now.
 	 */
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(0, info, pin->pin),
 			   BIT(p), f << p);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, pin->pin),
+	regmap_update_bits(info->map, REG_ALT(1, info, pin->pin),
 			   BIT(p), f << (p - 1));
 
 	return 0;
 }
 
+#define REG(r, info, p) ((r) * (info)->stride + (4 * ((p) / 32)))
+
 static int ocelot_gpio_set_direction(struct pinctrl_dev *pctldev,
 				     struct pinctrl_gpio_range *range,
 				     unsigned int pin, bool input)
@@ -445,9 +447,9 @@ static int ocelot_gpio_request_enable(struct pinctrl_dev *pctldev,
 	struct ocelot_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	unsigned int p = offset % 32;
 
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT0, info, offset),
+	regmap_update_bits(info->map, REG_ALT(0, info, offset),
 			   BIT(p), 0);
-	regmap_update_bits(info->map, REG(OCELOT_GPIO_ALT1, info, offset),
+	regmap_update_bits(info->map, REG_ALT(1, info, offset),
 			   BIT(p), 0);
 
 	return 0;