Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (29 commits)
  m68k/mac: Remove mac_irq_{en,dis}able() wrappers
  m68k/irq: Remove obsolete support for user vector interrupt fixups
  m68k/irq: Remove obsolete m68k irq framework
  m68k/q40: Convert Q40/Q60 to genirq
  m68k/sun3: Convert Sun3/3x to genirq
  m68k/sun3: Use the kstat_irqs_cpu() wrapper
  m68k/apollo: Convert Apollo to genirq
  m68k/vme: Convert VME to genirq
  m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq
  m68k/mac: Optimize interrupts using chain handlers
  m68k/mac: Convert Mac to genirq
  m68k/amiga: Optimize interrupts using chain handlers
  m68k/amiga: Convert Amiga to genirq
  m68k/amiga: Refactor amiints.c
  m68k/atari: Remove code and comments about different irq types
  m68k/atari: Convert Atari to genirq
  m68k/irq: Add genirq support
  m68k/irq: Remove obsolete IRQ_FLG_* users
  m68k/irq: Rename {,__}m68k_handle_int()
  m68k/irq: Add m68k_setup_irq_controller()
  ...

arch/m68k/Kconfig

@@ -4,8 +4,8 @@ config M68K
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
-	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_IRQ_SHOW if !MMU
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 
 config RWSEM_GENERIC_SPINLOCK

arch/m68k/Kconfig.bus

@@ -2,6 +2,15 @@ if MMU
 
 comment "Bus Support"
 
+config DIO
+	bool "DIO bus support"
+	depends on HP300
+	default y
+	help
+	  Say Y here to enable support for the "DIO" expansion bus used in
+	  HP300 machines. If you are using such a system you almost certainly
+	  want this.
+
 config NUBUS
 	bool
 	depends on MAC

arch/m68k/Kconfig.devices

@@ -24,6 +24,37 @@ config PROC_HARDWARE
 	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 	  and memory size.
 
+config NATFEAT
+	bool "ARAnyM emulator support"
+	depends on ATARI
+	help
+	  This option enables support for ARAnyM native features, such as
+	  access to a disk image as /dev/hda.
+
+config NFBLOCK
+	tristate "NatFeat block device support"
+	depends on BLOCK && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat block device
+	  which allows direct access to the hard drives without using
+	  the hardware emulation.
+
+config NFCON
+	tristate "NatFeat console driver"
+	depends on NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
+config NFETH
+	tristate "NatFeat Ethernet support"
+	depends on ETHERNET && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat network device
+	  which will emulate a regular ethernet device while presenting an
+	  ethertap device to the host system.
+
 endmenu
 
 menu "Character devices"

arch/m68k/amiga/amiints.c

 /*
- * linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
+ * Amiga Linux interrupt handling code
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 11/07/96: rewritten interrupt handling, irq lists are exists now only for
- *           this sources where it makes sense (VERTB/PORTS/EXTER) and you must
- *           be careful that dev_id for this sources is unique since this the
- *           only possibility to distinguish between different handlers for
- *           free_irq. irq lists also have different irq flags:
- *           - IRQ_FLG_FAST: handler is inserted at top of list (after other
- *                           fast handlers)
- *           - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
- *                           they're executed irq level is set to the previous
- *                           one, but handlers don't need to be reentrant, if
- *                           reentrance occurred, slow handlers will be just
- *                           called again.
- *           The whole interrupt handling for CIAs is moved to cia.c
- *           /Roman Zippel
- *
- * 07/08/99: rewamp of the interrupt handling - we now have two types of
- *           interrupts, normal and fast handlers, fast handlers being
- *           marked with IRQF_DISABLED and runs with all other interrupts
- *           disabled. Normal interrupts disable their own source but
- *           run with all other interrupt sources enabled.
- *           PORTS and EXTER interrupts are always shared even if the
- *           drivers do not explicitly mark this when calling
- *           request_irq which they really should do.
- *           This is similar to the way interrupts are handled on all
- *           other architectures and makes a ton of sense besides
- *           having the advantage of making it easier to share
- *           drivers.
- *           /Jes
  */
 
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/irq.h>
 
 #include <asm/irq.h>
 #include <asm/traps.h>
@@ -45,56 +17,6 @@
 #include <asm/amigaints.h>
 #include <asm/amipcmcia.h>
 
-static void amiga_enable_irq(unsigned int irq);
-static void amiga_disable_irq(unsigned int irq);
-static irqreturn_t ami_int1(int irq, void *dev_id);
-static irqreturn_t ami_int3(int irq, void *dev_id);
-static irqreturn_t ami_int4(int irq, void *dev_id);
-static irqreturn_t ami_int5(int irq, void *dev_id);
-
-static struct irq_controller amiga_irq_controller = {
-	.name		= "amiga",
-	.lock		= __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
-	.enable		= amiga_enable_irq,
-	.disable	= amiga_disable_irq,
-};
-
-/*
- * void amiga_init_IRQ(void)
- *
- * Parameters:	None
- *
- * Returns:	Nothing
- *
- * This function should be called during kernel startup to initialize
- * the amiga IRQ handling routines.
- */
-
-void __init amiga_init_IRQ(void)
-{
-	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
-		pr_err("Couldn't register int%d\n", 1);
-	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
-		pr_err("Couldn't register int%d\n", 3);
-	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
-		pr_err("Couldn't register int%d\n", 4);
-	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
-		pr_err("Couldn't register int%d\n", 5);
-
-	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
-
-	/* turn off PCMCIA interrupts */
-	if (AMIGAHW_PRESENT(PCMCIA))
-		gayle.inten = GAYLE_IRQ_IDE;
-
-	/* turn off all interrupts and enable the master interrupt bit */
-	amiga_custom.intena = 0x7fff;
-	amiga_custom.intreq = 0x7fff;
-	amiga_custom.intena = IF_SETCLR | IF_INTEN;
-
-	cia_init_IRQ(&ciaa_base);
-	cia_init_IRQ(&ciab_base);
-}
 
 /*
  * Enable/disable a particular machine specific interrupt source.
@@ -103,112 +25,150 @@ void __init amiga_init_IRQ(void)
  * internal data, that may not be changed by the interrupt at the same time.
  */
 
-static void amiga_enable_irq(unsigned int irq)
+static void amiga_irq_enable(struct irq_data *data)
 {
-	amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
+	amiga_custom.intena = IF_SETCLR | (1 << (data->irq - IRQ_USER));
 }
 
-static void amiga_disable_irq(unsigned int irq)
+static void amiga_irq_disable(struct irq_data *data)
 {
-	amiga_custom.intena = 1 << (irq - IRQ_USER);
+	amiga_custom.intena = 1 << (data->irq - IRQ_USER);
 }
 
+static struct irq_chip amiga_irq_chip = {
+	.name		= "amiga",
+	.irq_enable	= amiga_irq_enable,
+	.irq_disable	= amiga_irq_disable,
+};
+
+
 /*
  * The builtin Amiga hardware interrupt handlers.
  */
 
-static irqreturn_t ami_int1(int irq, void *dev_id)
+static void ami_int1(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial transmit buffer empty, interrupt */
 	if (ints & IF_TBE) {
 		amiga_custom.intreq = IF_TBE;
-		m68k_handle_int(IRQ_AMIGA_TBE);
+		generic_handle_irq(IRQ_AMIGA_TBE);
 	}
 
 	/* if floppy disk transfer complete, interrupt */
 	if (ints & IF_DSKBLK) {
 		amiga_custom.intreq = IF_DSKBLK;
-		m68k_handle_int(IRQ_AMIGA_DSKBLK);
+		generic_handle_irq(IRQ_AMIGA_DSKBLK);
 	}
 
 	/* if software interrupt set, interrupt */
 	if (ints & IF_SOFT) {
 		amiga_custom.intreq = IF_SOFT;
-		m68k_handle_int(IRQ_AMIGA_SOFT);
+		generic_handle_irq(IRQ_AMIGA_SOFT);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int3(int irq, void *dev_id)
+static void ami_int3(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if a blitter interrupt */
 	if (ints & IF_BLIT) {
 		amiga_custom.intreq = IF_BLIT;
-		m68k_handle_int(IRQ_AMIGA_BLIT);
+		generic_handle_irq(IRQ_AMIGA_BLIT);
 	}
 
 	/* if a copper interrupt */
 	if (ints & IF_COPER) {
 		amiga_custom.intreq = IF_COPER;
-		m68k_handle_int(IRQ_AMIGA_COPPER);
+		generic_handle_irq(IRQ_AMIGA_COPPER);
 	}
 
 	/* if a vertical blank interrupt */
 	if (ints & IF_VERTB) {
 		amiga_custom.intreq = IF_VERTB;
-		m68k_handle_int(IRQ_AMIGA_VERTB);
+		generic_handle_irq(IRQ_AMIGA_VERTB);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int4(int irq, void *dev_id)
+static void ami_int4(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if audio 0 interrupt */
 	if (ints & IF_AUD0) {
 		amiga_custom.intreq = IF_AUD0;
-		m68k_handle_int(IRQ_AMIGA_AUD0);
+		generic_handle_irq(IRQ_AMIGA_AUD0);
 	}
 
 	/* if audio 1 interrupt */
 	if (ints & IF_AUD1) {
 		amiga_custom.intreq = IF_AUD1;
-		m68k_handle_int(IRQ_AMIGA_AUD1);
+		generic_handle_irq(IRQ_AMIGA_AUD1);
 	}
 
 	/* if audio 2 interrupt */
 	if (ints & IF_AUD2) {
 		amiga_custom.intreq = IF_AUD2;
-		m68k_handle_int(IRQ_AMIGA_AUD2);
+		generic_handle_irq(IRQ_AMIGA_AUD2);
 	}
 
 	/* if audio 3 interrupt */
 	if (ints & IF_AUD3) {
 		amiga_custom.intreq = IF_AUD3;
-		m68k_handle_int(IRQ_AMIGA_AUD3);
+		generic_handle_irq(IRQ_AMIGA_AUD3);
 	}
-	return IRQ_HANDLED;
 }
 
-static irqreturn_t ami_int5(int irq, void *dev_id)
+static void ami_int5(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial receive buffer full interrupt */
 	if (ints & IF_RBF) {
 		/* acknowledge of IF_RBF must be done by the serial interrupt */
-		m68k_handle_int(IRQ_AMIGA_RBF);
+		generic_handle_irq(IRQ_AMIGA_RBF);
 	}
 
 	/* if a disk sync interrupt */
 	if (ints & IF_DSKSYN) {
 		amiga_custom.intreq = IF_DSKSYN;
-		m68k_handle_int(IRQ_AMIGA_DSKSYN);
+		generic_handle_irq(IRQ_AMIGA_DSKSYN);
 	}
-	return IRQ_HANDLED;
+}
+
+
+/*
+ * void amiga_init_IRQ(void)
+ *
+ * Parameters:	None
+ *
+ * Returns:	Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the amiga IRQ handling routines.
+ */
+
+void __init amiga_init_IRQ(void)
+{
+	m68k_setup_irq_controller(&amiga_irq_chip, handle_simple_irq, IRQ_USER,
+				  AMI_STD_IRQS);
+
+	irq_set_chained_handler(IRQ_AUTO_1, ami_int1);
+	irq_set_chained_handler(IRQ_AUTO_3, ami_int3);
+	irq_set_chained_handler(IRQ_AUTO_4, ami_int4);
+	irq_set_chained_handler(IRQ_AUTO_5, ami_int5);
+
+	/* turn off PCMCIA interrupts */
+	if (AMIGAHW_PRESENT(PCMCIA))
+		gayle.inten = GAYLE_IRQ_IDE;
+
+	/* turn off all interrupts and enable the master interrupt bit */
+	amiga_custom.intena = 0x7fff;
+	amiga_custom.intreq = 0x7fff;
+	amiga_custom.intena = IF_SETCLR | IF_INTEN;
+
+	cia_init_IRQ(&ciaa_base);
+	cia_init_IRQ(&ciab_base);
 }

arch/m68k/amiga/cia.c

@@ -93,13 +93,14 @@ static irqreturn_t cia_handler(int irq, void *dev_id)
 	amiga_custom.intreq = base->int_mask;
 	for (; ints; mach_irq++, ints >>= 1) {
 		if (ints & 1)
-			m68k_handle_int(mach_irq);
+			generic_handle_irq(mach_irq);
 	}
 	return IRQ_HANDLED;
 }
 
-static void cia_enable_irq(unsigned int irq)
+static void cia_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
 	unsigned char mask;
 
 	if (irq >= IRQ_AMIGA_CIAB) {
@@ -113,19 +114,20 @@ static void cia_enable_irq(unsigned int irq)
 	}
 }
 
-static void cia_disable_irq(unsigned int irq)
+static void cia_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= IRQ_AMIGA_CIAB)
 		cia_able_irq(&ciab_base, 1 << (irq - IRQ_AMIGA_CIAB));
 	else
 		cia_able_irq(&ciaa_base, 1 << (irq - IRQ_AMIGA_CIAA));
 }
 
-static struct irq_controller cia_irq_controller = {
+static struct irq_chip cia_irq_chip = {
 	.name		= "cia",
-	.lock		= __SPIN_LOCK_UNLOCKED(cia_irq_controller.lock),
-	.enable		= cia_enable_irq,
-	.disable	= cia_disable_irq,
+	.irq_enable	= cia_irq_enable,
+	.irq_disable	= cia_irq_disable,
 };
 
 /*
@@ -134,9 +136,9 @@ static struct irq_controller cia_irq_controller = {
  * into this chain.
  */
 
-static void auto_enable_irq(unsigned int irq)
+static void auto_irq_enable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_SETCLR | IF_PORTS;
 		break;
@@ -146,9 +148,9 @@ static void auto_enable_irq(unsigned int irq)
 	}
 }
 
-static void auto_disable_irq(unsigned int irq)
+static void auto_irq_disable(struct irq_data *data)
 {
-	switch (irq) {
+	switch (data->irq) {
 	case IRQ_AUTO_2:
 		amiga_custom.intena = IF_PORTS;
 		break;
@@ -158,24 +160,25 @@ static void auto_disable_irq(unsigned int irq)
 	}
 }
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.enable		= auto_enable_irq,
-	.disable	= auto_disable_irq,
+	.irq_enable	= auto_irq_enable,
+	.irq_disable	= auto_irq_disable,
 };
 
 void __init cia_init_IRQ(struct ciabase *base)
 {
-	m68k_setup_irq_controller(&cia_irq_controller, base->cia_irq, CIA_IRQS);
+	m68k_setup_irq_controller(&cia_irq_chip, handle_simple_irq,
+				  base->cia_irq, CIA_IRQS);
 
 	/* clear any pending interrupt and turn off all interrupts */
 	cia_set_irq(base, CIA_ICR_ALL);
 	cia_able_irq(base, CIA_ICR_ALL);
 
 	/* override auto int and install CIA handler */
-	m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
-	m68k_irq_startup(base->handler_irq);
+	m68k_setup_irq_controller(&auto_irq_chip, handle_simple_irq,
+				  base->handler_irq, 1);
+	m68k_irq_startup_irq(base->handler_irq);
 	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
 			base->name, base))
 		pr_err("Couldn't register %s interrupt\n", base->name);

arch/m68k/apollo/dn_ints.c

 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
-#include <asm/irq.h>
 #include <asm/traps.h>
 #include <asm/apollohw.h>
 
-void dn_process_int(unsigned int irq, struct pt_regs *fp)
+unsigned int apollo_irq_startup(struct irq_data *data)
 {
-	__m68k_handle_int(irq, fp);
+	unsigned int irq = data->irq;
 
-	*(volatile unsigned char *)(pica)=0x20;
-	*(volatile unsigned char *)(picb)=0x20;
-}
-
-int apollo_irq_startup(unsigned int irq)
-{
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) &= ~(1 << irq);
 	else
@@ -21,24 +15,33 @@ int apollo_irq_startup(unsigned int irq)
 	return 0;
 }
 
-void apollo_irq_shutdown(unsigned int irq)
+void apollo_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq < 8)
 		*(volatile unsigned char *)(pica+1) |= (1 << irq);
 	else
 		*(volatile unsigned char *)(picb+1) |= (1 << (irq - 8));
 }
 
-static struct irq_controller apollo_irq_controller = {
+void apollo_irq_eoi(struct irq_data *data)
+{
+	*(volatile unsigned char *)(pica) = 0x20;
+	*(volatile unsigned char *)(picb) = 0x20;
+}
+
+static struct irq_chip apollo_irq_chip = {
 	.name           = "apollo",
-	.lock           = __SPIN_LOCK_UNLOCKED(apollo_irq_controller.lock),
-	.startup        = apollo_irq_startup,
-	.shutdown       = apollo_irq_shutdown,
+	.irq_startup    = apollo_irq_startup,
+	.irq_shutdown   = apollo_irq_shutdown,
+	.irq_eoi	= apollo_irq_eoi,
 };
 
 
 void __init dn_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER + 96, 16, dn_process_int);
-	m68k_setup_irq_controller(&apollo_irq_controller, IRQ_APOLLO, 16);
+	m68k_setup_user_interrupt(VEC_USER + 96, 16);
+	m68k_setup_irq_controller(&apollo_irq_chip, handle_fasteoi_irq,
+				  IRQ_APOLLO, 16);
 }

arch/m68k/atari/ataints.c

@@ -60,243 +60,7 @@
  * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
  * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
  * be allocated by atari_register_vme_int().
- *
- * Each interrupt can be of three types:
- *
- *  - SLOW: The handler runs with all interrupts enabled, except the one it
- *    was called by (to avoid reentering). This should be the usual method.
- *    But it is currently possible only for MFP ints, since only the MFP
- *    offers an easy way to mask interrupts.
- *
- *  - FAST: The handler runs with all interrupts disabled. This should be used
- *    only for really fast handlers, that just do actions immediately
- *    necessary, and let the rest do a bottom half or task queue.
- *
- *  - PRIORITIZED: The handler can be interrupted by higher-level ints
- *    (greater IPL, no MFP priorities!). This is the method of choice for ints
- *    which should be slow, but are not from a MFP.
- *
- * The feature of more than one handler for one int source is still there, but
- * only applicable if all handers are of the same type. To not slow down
- * processing of ints with only one handler by the chaining feature, the list
- * calling function atari_call_irq_list() is only plugged in at the time the
- * second handler is registered.
- *
- * Implementation notes: For fast-as-possible int handling, there are separate
- * entry points for each type (slow/fast/prio). The assembler handler calls
- * the irq directly in the usual case, no C wrapper is involved. In case of
- * multiple handlers, atari_call_irq_list() is registered as handler and calls
- * in turn the real irq's. To ease access from assembler level to the irq
- * function pointer and accompanying data, these two are stored in a separate
- * array, irq_handler[]. The rest of data (type, name) are put into a second
- * array, irq_param, that is accessed from C only. For each slow interrupt (32
- * in all) there are separate handler functions, which makes it possible to
- * hard-code the MFP register address and value, are necessary to mask the
- * int. If there'd be only one generic function, lots of calculations would be
- * needed to determine MFP register and int mask from the vector number :-(
- *
- * Furthermore, slow ints may not lower the IPL below its previous value
- * (before the int happened). This is needed so that an int of class PRIO, on
- * that this int may be stacked, cannot be reentered. This feature is
- * implemented as follows: If the stack frame format is 1 (throwaway), the int
- * is not stacked, and the IPL is anded with 0xfbff, resulting in a new level
- * 2, which still blocks the HSYNC, but no interrupts of interest. If the
- * frame format is 0, the int is nested, and the old IPL value can be found in
- * the sr copy in the frame.
- */
-
-#if 0
-
-#define	NUM_INT_SOURCES	(8 + NUM_ATARI_SOURCES)
-
-typedef void (*asm_irq_handler)(void);
-
-struct irqhandler {
-	irqreturn_t (*handler)(int, void *, struct pt_regs *);
-	void	*dev_id;
-};
-
-struct irqparam {
-	unsigned long	flags;
-	const char	*devname;
-};
-
-/*
- * Array with irq's and their parameter data. This array is accessed from low
- * level assembler code, so an element size of 8 allows usage of index scaling
- * addressing mode.
  */
-static struct irqhandler irq_handler[NUM_INT_SOURCES];
-
-/*
- * This array hold the rest of parameters of int handlers: type
- * (slow,fast,prio) and the name of the handler. These values are only
- * accessed from C
- */
-static struct irqparam irq_param[NUM_INT_SOURCES];
-
-/* check for valid int number (complex, sigh...) */
-#define	IS_VALID_INTNO(n)											\
-	((n) > 0 &&														\
-	 /* autovec and ST-MFP ok anyway */								\
-	 (((n) < TTMFP_SOURCE_BASE) ||									\
-	  /* TT-MFP ok if present */									\
-	  ((n) >= TTMFP_SOURCE_BASE && (n) < SCC_SOURCE_BASE &&			\
-	   ATARIHW_PRESENT(TT_MFP)) ||									\
-	  /* SCC ok if present and number even */						\
-	  ((n) >= SCC_SOURCE_BASE && (n) < VME_SOURCE_BASE &&			\
-	   !((n) & 1) && ATARIHW_PRESENT(SCC)) ||						\
-	  /* greater numbers ok if they are registered VME vectors */		\
-	  ((n) >= VME_SOURCE_BASE && (n) < VME_SOURCE_BASE + VME_MAX_SOURCES && \
-		  free_vme_vec_bitmap & (1 << ((n) - VME_SOURCE_BASE)))))
-
-
-/*
- * Here start the assembler entry points for interrupts
- */
-
-#define IRQ_NAME(nr) atari_slow_irq_##nr##_handler(void)
-
-#define	BUILD_SLOW_IRQ(n)						   \
-asmlinkage void IRQ_NAME(n);						   \
-/* Dummy function to allow asm with operands.  */			   \
-void atari_slow_irq_##n##_dummy (void) {				   \
-__asm__ (__ALIGN_STR "\n"						   \
-"atari_slow_irq_" #n "_handler:\t"					   \
-"	addl	%6,%5\n"	/* preempt_count() += HARDIRQ_OFFSET */	   \
-	SAVE_ALL_INT "\n"						   \
-	GET_CURRENT(%%d0) "\n"						   \
-"	andb	#~(1<<(%c3&7)),%a4:w\n"	/* mask this interrupt */	   \
-	/* get old IPL from stack frame */				   \
-"	bfextu	%%sp@(%c2){#5,#3},%%d0\n"				   \
-"	movew	%%sr,%%d1\n"						   \
-"	bfins	%%d0,%%d1{#21,#3}\n"					   \
-"	movew	%%d1,%%sr\n"		/* set IPL = previous value */	   \
-"	addql	#1,%a0\n"						   \
-"	lea	%a1,%%a0\n"						   \
-"	pea	%%sp@\n"		/* push addr of frame */	   \
-"	movel	%%a0@(4),%%sp@-\n"	/* push handler data */		   \
-"	pea	(%c3+8)\n"		/* push int number */		   \
-"	movel	%%a0@,%%a0\n"						   \
-"	jbsr	%%a0@\n"		/* call the handler */		   \
-"	addql	#8,%%sp\n"						   \
-"	addql	#4,%%sp\n"						   \
-"	orw	#0x0600,%%sr\n"						   \
-"	andw	#0xfeff,%%sr\n"		/* set IPL = 6 again */		   \
-"	orb	#(1<<(%c3&7)),%a4:w\n"	/* now unmask the int again */	   \
-"	jbra	ret_from_interrupt\n"					   \
-	 : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]),	   \
-	     "n" (PT_OFF_SR), "n" (n),					   \
-	     "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a)   \
-		        : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)		   \
-);									   \
-	for (;;);			/* fake noreturn */		   \
-}
-
-BUILD_SLOW_IRQ(0);
-BUILD_SLOW_IRQ(1);
-BUILD_SLOW_IRQ(2);
-BUILD_SLOW_IRQ(3);
-BUILD_SLOW_IRQ(4);
-BUILD_SLOW_IRQ(5);
-BUILD_SLOW_IRQ(6);
-BUILD_SLOW_IRQ(7);
-BUILD_SLOW_IRQ(8);
-BUILD_SLOW_IRQ(9);
-BUILD_SLOW_IRQ(10);
-BUILD_SLOW_IRQ(11);
-BUILD_SLOW_IRQ(12);
-BUILD_SLOW_IRQ(13);
-BUILD_SLOW_IRQ(14);
-BUILD_SLOW_IRQ(15);
-BUILD_SLOW_IRQ(16);
-BUILD_SLOW_IRQ(17);
-BUILD_SLOW_IRQ(18);
-BUILD_SLOW_IRQ(19);
-BUILD_SLOW_IRQ(20);
-BUILD_SLOW_IRQ(21);
-BUILD_SLOW_IRQ(22);
-BUILD_SLOW_IRQ(23);
-BUILD_SLOW_IRQ(24);
-BUILD_SLOW_IRQ(25);
-BUILD_SLOW_IRQ(26);
-BUILD_SLOW_IRQ(27);
-BUILD_SLOW_IRQ(28);
-BUILD_SLOW_IRQ(29);
-BUILD_SLOW_IRQ(30);
-BUILD_SLOW_IRQ(31);
-
-asm_irq_handler slow_handlers[32] = {
-	[0]	= atari_slow_irq_0_handler,
-	[1]	= atari_slow_irq_1_handler,
-	[2]	= atari_slow_irq_2_handler,
-	[3]	= atari_slow_irq_3_handler,
-	[4]	= atari_slow_irq_4_handler,
-	[5]	= atari_slow_irq_5_handler,
-	[6]	= atari_slow_irq_6_handler,
-	[7]	= atari_slow_irq_7_handler,
-	[8]	= atari_slow_irq_8_handler,
-	[9]	= atari_slow_irq_9_handler,
-	[10]	= atari_slow_irq_10_handler,
-	[11]	= atari_slow_irq_11_handler,
-	[12]	= atari_slow_irq_12_handler,
-	[13]	= atari_slow_irq_13_handler,
-	[14]	= atari_slow_irq_14_handler,
-	[15]	= atari_slow_irq_15_handler,
-	[16]	= atari_slow_irq_16_handler,
-	[17]	= atari_slow_irq_17_handler,
-	[18]	= atari_slow_irq_18_handler,
-	[19]	= atari_slow_irq_19_handler,
-	[20]	= atari_slow_irq_20_handler,
-	[21]	= atari_slow_irq_21_handler,
-	[22]	= atari_slow_irq_22_handler,
-	[23]	= atari_slow_irq_23_handler,
-	[24]	= atari_slow_irq_24_handler,
-	[25]	= atari_slow_irq_25_handler,
-	[26]	= atari_slow_irq_26_handler,
-	[27]	= atari_slow_irq_27_handler,
-	[28]	= atari_slow_irq_28_handler,
-	[29]	= atari_slow_irq_29_handler,
-	[30]	= atari_slow_irq_30_handler,
-	[31]	= atari_slow_irq_31_handler
-};
-
-asmlinkage void atari_fast_irq_handler( void );
-asmlinkage void atari_prio_irq_handler( void );
-
-/* Dummy function to allow asm with operands.  */
-void atari_fast_prio_irq_dummy (void) {
-__asm__ (__ALIGN_STR "\n"
-"atari_fast_irq_handler:\n\t"
-	"orw	#0x700,%%sr\n"		/* disable all interrupts */
-"atari_prio_irq_handler:\n\t"
-	"addl	%3,%2\n\t"		/* preempt_count() += HARDIRQ_OFFSET */
-	SAVE_ALL_INT "\n\t"
-	GET_CURRENT(%%d0) "\n\t"
-	/* get vector number from stack frame and convert to source */
-	"bfextu	%%sp@(%c1){#4,#10},%%d0\n\t"
-	"subw	#(0x40-8),%%d0\n\t"
-	"jpl	1f\n\t"
-	"addw	#(0x40-8-0x18),%%d0\n"
-    "1:\tlea	%a0,%%a0\n\t"
-	"addql	#1,%%a0@(%%d0:l:4)\n\t"
-	"lea	irq_handler,%%a0\n\t"
-	"lea	%%a0@(%%d0:l:8),%%a0\n\t"
-	"pea	%%sp@\n\t"		/* push frame address */
-	"movel	%%a0@(4),%%sp@-\n\t"	/* push handler data */
-	"movel	%%d0,%%sp@-\n\t"	/* push int number */
-	"movel	%%a0@,%%a0\n\t"
-	"jsr	%%a0@\n\t"		/* and call the handler */
-	"addql	#8,%%sp\n\t"
-	"addql	#4,%%sp\n\t"
-	"jbra	ret_from_interrupt"
-	 : : "i" (&kstat_cpu(0).irqs), "n" (PT_OFF_FORMATVEC),
-	     "m" (preempt_count()), "di" (HARDIRQ_OFFSET)
-);
-	for (;;);
-}
-#endif
 
 /*
  * Bitmap for free interrupt vector numbers
@@ -320,31 +84,44 @@ extern void atari_microwire_cmd(int cmd);
 
 extern int atari_SCC_reset_done;
 
-static int atari_startup_irq(unsigned int irq)
+static unsigned int atari_irq_startup(struct irq_data *data)
 {
-	m68k_irq_startup(irq);
+	unsigned int irq = data->irq;
+
+	m68k_irq_startup(data);
 	atari_turnon_irq(irq);
 	atari_enable_irq(irq);
 	return 0;
 }
 
-static void atari_shutdown_irq(unsigned int irq)
+static void atari_irq_shutdown(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	atari_disable_irq(irq);
 	atari_turnoff_irq(irq);
-	m68k_irq_shutdown(irq);
+	m68k_irq_shutdown(data);
 
 	if (irq == IRQ_AUTO_4)
 	    vectors[VEC_INT4] = falcon_hblhandler;
 }
 
-static struct irq_controller atari_irq_controller = {
+static void atari_irq_enable(struct irq_data *data)
+{
+	atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+	atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
 	.name		= "atari",
-	.lock		= __SPIN_LOCK_UNLOCKED(atari_irq_controller.lock),
-	.startup	= atari_startup_irq,
-	.shutdown	= atari_shutdown_irq,
-	.enable		= atari_enable_irq,
-	.disable	= atari_disable_irq,
+	.irq_startup	= atari_irq_startup,
+	.irq_shutdown	= atari_irq_shutdown,
+	.irq_enable	= atari_irq_enable,
+	.irq_disable	= atari_irq_disable,
 };
 
 /*
@@ -360,8 +137,9 @@ static struct irq_controller atari_irq_controller = {
 
 void __init atari_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
-	m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
+	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+				  NUM_ATARI_SOURCES - 1);
 
 	/* Initialize the MFP(s) */
 

arch/m68k/bvme6000/config.c

@@ -86,7 +86,7 @@ static void bvme6000_get_model(char *model)
  */
 static void __init bvme6000_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_bvme6000(void)

arch/m68k/hp300/time.c

@@ -70,7 +70,7 @@ void __init hp300_sched_init(irq_handler_t vector)
 
   asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
 
-  if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+  if (request_irq(IRQ_AUTO_6, hp300_tick, 0, "timer tick", vector))
     pr_err("Couldn't register timer interrupt\n");
 
   out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */

arch/m68k/include/asm/hardirq.h

@@ -18,6 +18,11 @@
 
 #ifdef CONFIG_MMU
 
+static inline void ack_bad_irq(unsigned int irq)
+{
+	pr_crit("unexpected IRQ trap at vector %02x\n", irq);
+}
+
 /* entry.S is sensitive to the offsets of these fields */
 typedef struct {
 	unsigned int __softirq_pending;

arch/m68k/include/asm/irq.h

@@ -27,11 +27,6 @@
 
 #ifdef CONFIG_MMU
 
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
 /*
  * Interrupt source definitions
  * General interrupt sources are the level 1-7.
@@ -54,10 +49,6 @@
 
 #define IRQ_USER	8
 
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
 /*
  * various flags for request_irq() - the Amiga now uses the standard
  * mechanism like all other architectures - IRQF_DISABLED and
@@ -71,57 +62,27 @@ struct pt_regs;
 #define IRQ_FLG_STD	(0x8000)	/* internally used		*/
 #endif
 
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
-	irqreturn_t	(*handler)(int, void *);
-	void		*dev_id;
-	struct irq_node *next;
-	unsigned long	flags;
-	const char	*devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
-	int		(*handler)(int, void *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-};
-
-struct irq_controller {
-	const char *name;
-	spinlock_t lock;
-	int (*startup)(unsigned int irq);
-	void (*shutdown)(unsigned int irq);
-	void (*enable)(unsigned int irq);
-	void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
+struct irq_data;
+struct irq_chip;
+struct irq_desc;
+extern unsigned int m68k_irq_startup(struct irq_data *data);
+extern unsigned int m68k_irq_startup_irq(unsigned int irq);
+extern void m68k_irq_shutdown(struct irq_data *data);
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int,
+						      struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt);
+extern void m68k_setup_irq_controller(struct irq_chip *,
+				      void (*handle)(unsigned int irq,
+						     struct irq_desc *desc),
+				      unsigned int irq, unsigned int cnt);
 
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+extern unsigned int irq_canonicalize(unsigned int irq);
 
 #else
 #define irq_canonicalize(irq)  (irq)
 #endif /* CONFIG_MMU */
 
 asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+extern atomic_t irq_err_count;
 
 #endif /* _M68K_IRQ_H_ */

arch/m68k/include/asm/macintosh.h

@@ -12,6 +12,8 @@ extern void mac_reset(void);
 extern void mac_poweroff(void);
 extern void mac_init_IRQ(void);
 extern int mac_irq_pending(unsigned int);
+extern void mac_irq_enable(struct irq_data *data);
+extern void mac_irq_disable(struct irq_data *data);
 
 /*
  *	Floppy driver magic hook - probably shouldn't be here

arch/m68k/include/asm/q40ints.h

@@ -24,6 +24,3 @@
 #define Q40_IRQ10_MASK       (1<<5)
 #define Q40_IRQ14_MASK       (1<<6)
 #define Q40_IRQ15_MASK       (1<<7)
-
-extern unsigned long q40_probe_irq_on (void);
-extern int q40_probe_irq_off (unsigned long irqs);

arch/m68k/kernel/Makefile

@@ -6,16 +6,15 @@ extra-$(CONFIG_MMU)	:= head.o
 extra-$(CONFIG_SUN3)	:= sun3-head.o
 extra-y			+= vmlinux.lds
 
-obj-y	:= entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
-	   sys_m68k.o syscalltable.o time.o traps.o
+obj-y	:= entry.o irq.o m68k_ksyms.o module.o process.o ptrace.o setup.o \
+	   signal.o sys_m68k.o syscalltable.o time.o traps.o
 
-obj-$(CONFIG_MMU)	+= ints.o devres.o vectors.o
-devres-$(CONFIG_MMU)	= ../../../kernel/irq/devres.o
+obj-$(CONFIG_MMU)	+= ints.o vectors.o
 
 ifndef CONFIG_MMU_SUN3
 obj-y			+= dma.o
 endif
 ifndef CONFIG_MMU
-obj-y			+= init_task.o irq.o
+obj-y			+= init_task.o
 endif
 

arch/m68k/kernel/entry_mm.S

@@ -48,7 +48,7 @@
 .globl sys_fork, sys_clone, sys_vfork
 .globl ret_from_interrupt, bad_interrupt
 .globl auto_irqhandler_fixup
-.globl user_irqvec_fixup, user_irqhandler_fixup
+.globl user_irqvec_fixup
 
 .text
 ENTRY(buserr)
@@ -207,7 +207,7 @@ ENTRY(auto_inthandler)
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
 auto_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 ret_from_interrupt:
@@ -240,8 +240,7 @@ user_irqvec_fixup = . + 2
 
 	movel	%sp,%sp@-
 	movel	%d0,%sp@-		|  put vector # on stack
-user_irqhandler_fixup = . + 2
-	jsr	__m68k_handle_int	|  process the IRQ
+	jsr	do_IRQ			|  process the IRQ
 	addql	#8,%sp			|  pop parameters off stack
 
 	subqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)

arch/m68k/kernel/ints.c

@@ -4,25 +4,6 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file COPYING in the main directory of this archive
  * for more details.
- *
- * 07/03/96: Timer initialization, and thus mach_sched_init(),
- *           removed from request_irq() and moved to init_time().
- *           We should therefore consider renaming our add_isr() and
- *           remove_isr() to request_irq() and free_irq()
- *           respectively, so they are compliant with the other
- *           architectures.                                     /Jes
- * 11/07/96: Changed all add_/remove_isr() to request_/free_irq() calls.
- *           Removed irq list support, if any machine needs an irq server
- *           it must implement this itself (as it's already done), instead
- *           only default handler are used with mach_default_handler.
- *           request_irq got some flags different from other architectures:
- *           - IRQ_FLG_REPLACE : Replace an existing handler (the default one
- *                               can be replaced without this flag)
- *           - IRQ_FLG_LOCK : handler can't be replaced
- *           There are other machine depending flags, see there
- *           If you want to replace a default handler you should know what
- *           you're doing, since it might handle different other irq sources
- *           which must be served                               /Roman Zippel
  */
 
 #include <linux/module.h>
@@ -47,33 +28,22 @@
 #endif
 
 extern u32 auto_irqhandler_fixup[];
-extern u32 user_irqhandler_fixup[];
 extern u16 user_irqvec_fixup[];
 
-/* table for system interrupt handlers */
-static struct irq_node *irq_list[NR_IRQS];
-static struct irq_controller *irq_controller[NR_IRQS];
-static int irq_depth[NR_IRQS];
-
 static int m68k_first_user_vec;
 
-static struct irq_controller auto_irq_controller = {
+static struct irq_chip auto_irq_chip = {
 	.name		= "auto",
-	.lock		= __SPIN_LOCK_UNLOCKED(auto_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-static struct irq_controller user_irq_controller = {
+static struct irq_chip user_irq_chip = {
 	.name		= "user",
-	.lock		= __SPIN_LOCK_UNLOCKED(user_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
 };
 
-#define NUM_IRQ_NODES 100
-static irq_node_t nodes[NUM_IRQ_NODES];
-
 /*
  * void init_IRQ(void)
  *
@@ -96,7 +66,7 @@ void __init init_IRQ(void)
 	}
 
 	for (i = IRQ_AUTO_1; i <= IRQ_AUTO_7; i++)
-		irq_controller[i] = &auto_irq_controller;
+		irq_set_chip_and_handler(i, &auto_irq_chip, handle_simple_irq);
 
 	mach_init_IRQ();
 }
@@ -106,7 +76,7 @@ void __init init_IRQ(void)
  * @handler: called from auto vector interrupts
  *
  * setup the handler to be called from auto vector interrupts instead of the
- * standard __m68k_handle_int(), it will be called with irq numbers in the range
+ * standard do_IRQ(), it will be called with irq numbers in the range
  * from IRQ_AUTO_1 - IRQ_AUTO_7.
  */
 void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *))
@@ -120,217 +90,49 @@ void __init m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_re
  * m68k_setup_user_interrupt
  * @vec: first user vector interrupt to handle
  * @cnt: number of active user vector interrupts
- * @handler: called from user vector interrupts
  *
  * setup user vector interrupts, this includes activating the specified range
  * of interrupts, only then these interrupts can be requested (note: this is
- * different from auto vector interrupts). An optional handler can be installed
- * to be called instead of the default __m68k_handle_int(), it will be called
- * with irq numbers starting from IRQ_USER.
+ * different from auto vector interrupts).
  */
-void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *))
+void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt)
 {
 	int i;
 
 	BUG_ON(IRQ_USER + cnt > NR_IRQS);
 	m68k_first_user_vec = vec;
 	for (i = 0; i < cnt; i++)
-		irq_controller[IRQ_USER + i] = &user_irq_controller;
+		irq_set_chip(IRQ_USER + i, &user_irq_chip);
 	*user_irqvec_fixup = vec - IRQ_USER;
-	if (handler)
-		*user_irqhandler_fixup = (u32)handler;
 	flush_icache();
 }
 
 /**
  * m68k_setup_irq_controller
- * @contr: irq controller which controls specified irq
+ * @chip: irq chip which controls specified irq
+ * @handle: flow handler which handles specified irq
  * @irq: first irq to be managed by the controller
+ * @cnt: number of irqs to be managed by the controller
  *
  * Change the controller for the specified range of irq, which will be used to
  * manage these irq. auto/user irq already have a default controller, which can
  * be changed as well, but the controller probably should use m68k_irq_startup/
  * m68k_irq_shutdown.
  */
-void m68k_setup_irq_controller(struct irq_controller *contr, unsigned int irq,
+void m68k_setup_irq_controller(struct irq_chip *chip,
+			       irq_flow_handler_t handle, unsigned int irq,
 			       unsigned int cnt)
 {
 	int i;
 
-	for (i = 0; i < cnt; i++)
-		irq_controller[irq + i] = contr;
-}
-
-irq_node_t *new_irq_node(void)
-{
-	irq_node_t *node;
-	short i;
-
-	for (node = nodes, i = NUM_IRQ_NODES-1; i >= 0; node++, i--) {
-		if (!node->handler) {
-			memset(node, 0, sizeof(*node));
-			return node;
-		}
+	for (i = 0; i < cnt; i++) {
+		irq_set_chip(irq + i, chip);
+		if (handle)
+			irq_set_handler(irq + i, handle);
 	}
-
-	printk ("new_irq_node: out of nodes\n");
-	return NULL;
 }
 
-int setup_irq(unsigned int irq, struct irq_node *node)
-{
-	struct irq_controller *contr;
-	struct irq_node **prev;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d from %s\n",
-		       __func__, irq, node->devname);
-		return -ENXIO;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	prev = irq_list + irq;
-	if (*prev) {
-		/* Can't share interrupts unless both agree to */
-		if (!((*prev)->flags & node->flags & IRQF_SHARED)) {
-			spin_unlock_irqrestore(&contr->lock, flags);
-			return -EBUSY;
-		}
-		while (*prev)
-			prev = &(*prev)->next;
-	}
-
-	if (!irq_list[irq]) {
-		if (contr->startup)
-			contr->startup(irq);
-		else
-			contr->enable(irq);
-	}
-	node->next = NULL;
-	*prev = node;
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-
-	return 0;
-}
-
-int request_irq(unsigned int irq,
-		irq_handler_t handler,
-		unsigned long flags, const char *devname, void *dev_id)
-{
-	struct irq_node *node;
-	int res;
-
-	node = new_irq_node();
-	if (!node)
-		return -ENOMEM;
-
-	node->handler = handler;
-	node->flags   = flags;
-	node->dev_id  = dev_id;
-	node->devname = devname;
-
-	res = setup_irq(irq, node);
-	if (res)
-		node->handler = NULL;
-
-	return res;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-void free_irq(unsigned int irq, void *dev_id)
-{
-	struct irq_controller *contr;
-	struct irq_node **p, *node;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n", __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-
-	p = irq_list + irq;
-	while ((node = *p)) {
-		if (node->dev_id == dev_id)
-			break;
-		p = &node->next;
-	}
-
-	if (node) {
-		*p = node->next;
-		node->handler = NULL;
-	} else
-		printk("%s: Removing probably wrong IRQ %d\n",
-		       __func__, irq);
-
-	if (!irq_list[irq]) {
-		if (contr->shutdown)
-			contr->shutdown(irq);
-		else
-			contr->disable(irq);
-	}
-
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(free_irq);
-
-void enable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (irq_depth[irq]) {
-		if (!--irq_depth[irq]) {
-			if (contr->enable)
-				contr->enable(irq);
-		}
-	} else
-		WARN_ON(1);
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(enable_irq);
-
-void disable_irq(unsigned int irq)
-{
-	struct irq_controller *contr;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !(contr = irq_controller[irq])) {
-		printk("%s: Incorrect IRQ %d\n",
-		       __func__, irq);
-		return;
-	}
-
-	spin_lock_irqsave(&contr->lock, flags);
-	if (!irq_depth[irq]++) {
-		if (contr->disable)
-			contr->disable(irq);
-	}
-	spin_unlock_irqrestore(&contr->lock, flags);
-}
-
-EXPORT_SYMBOL(disable_irq);
-
-void disable_irq_nosync(unsigned int irq) __attribute__((alias("disable_irq")));
-
-EXPORT_SYMBOL(disable_irq_nosync);
-
-int m68k_irq_startup(unsigned int irq)
+unsigned int m68k_irq_startup_irq(unsigned int irq)
 {
 	if (irq <= IRQ_AUTO_7)
 		vectors[VEC_SPUR + irq] = auto_inthandler;
@@ -339,41 +141,21 @@ int m68k_irq_startup(unsigned int irq)
 	return 0;
 }
 
-void m68k_irq_shutdown(unsigned int irq)
+unsigned int m68k_irq_startup(struct irq_data *data)
 {
-	if (irq <= IRQ_AUTO_7)
-		vectors[VEC_SPUR + irq] = bad_inthandler;
-	else
-		vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
+	return m68k_irq_startup_irq(data->irq);
 }
 
-
-/*
- * Do we need these probe functions on the m68k?
- *
- *  ... may be useful with ISA devices
- */
-unsigned long probe_irq_on (void)
+void m68k_irq_shutdown(struct irq_data *data)
 {
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_on();
-#endif
-	return 0;
-}
+	unsigned int irq = data->irq;
 
-EXPORT_SYMBOL(probe_irq_on);
-
-int probe_irq_off (unsigned long irqs)
-{
-#ifdef CONFIG_Q40
-	if (MACH_IS_Q40)
-		return q40_probe_irq_off(irqs);
-#endif
-	return 0;
+	if (irq <= IRQ_AUTO_7)
+		vectors[VEC_SPUR + irq] = bad_inthandler;
+	else
+		vectors[m68k_first_user_vec + irq - IRQ_USER] = bad_inthandler;
 }
 
-EXPORT_SYMBOL(probe_irq_off);
 
 unsigned int irq_canonicalize(unsigned int irq)
 {
@@ -386,52 +168,9 @@ unsigned int irq_canonicalize(unsigned int irq)
 
 EXPORT_SYMBOL(irq_canonicalize);
 
-asmlinkage void m68k_handle_int(unsigned int irq)
-{
-	struct irq_node *node;
-	kstat_cpu(0).irqs[irq]++;
-	node = irq_list[irq];
-	do {
-		node->handler(irq, node->dev_id);
-		node = node->next;
-	} while (node);
-}
-
-asmlinkage void __m68k_handle_int(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-	old_regs = set_irq_regs(regs);
-	m68k_handle_int(irq);
-	set_irq_regs(old_regs);
-}
 
 asmlinkage void handle_badint(struct pt_regs *regs)
 {
-	kstat_cpu(0).irqs[0]++;
-	printk("unexpected interrupt from %u\n", regs->vector);
-}
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	struct irq_controller *contr;
-	struct irq_node *node;
-	int i = *(loff_t *) v;
-
-	/* autovector interrupts */
-	if (irq_list[i]) {
-		contr = irq_controller[i];
-		node = irq_list[i];
-		seq_printf(p, "%-8s %3u: %10u %s", contr->name, i, kstat_cpu(0).irqs[i], node->devname);
-		while ((node = node->next))
-			seq_printf(p, ", %s", node->devname);
-		seq_puts(p, "\n");
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-void init_irq_proc(void)
-{
-	/* Insert /proc/irq driver here */
+	atomic_inc(&irq_err_count);
+	pr_warn("unexpected interrupt from %u\n", regs->vector);
 }
-#endif

arch/m68k/mac/baboon.c

@@ -11,6 +11,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -20,9 +21,6 @@
 
 /* #define DEBUG_IRQS */
 
-extern void mac_enable_irq(unsigned int);
-extern void mac_disable_irq(unsigned int);
-
 int baboon_present;
 static volatile struct baboon *baboon;
 static unsigned char baboon_disabled;
@@ -53,7 +51,7 @@ void __init baboon_init(void)
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-static irqreturn_t baboon_irq(int irq, void *dev_id)
+static void baboon_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -64,15 +62,16 @@ static irqreturn_t baboon_irq(int irq, void *dev_id)
 		(uint) baboon->mb_status);
 #endif
 
-	if (!(events = baboon->mb_ifr & 0x07))
-		return IRQ_NONE;
+	events = baboon->mb_ifr & 0x07;
+	if (!events)
+		return;
 
 	irq_num = IRQ_BABOON_0;
 	irq_bit = 1;
 	do {
 	        if (events & irq_bit) {
 			baboon->mb_ifr &= ~irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_bit <<= 1;
 		irq_num++;
@@ -82,7 +81,6 @@ static irqreturn_t baboon_irq(int irq, void *dev_id)
 	/* for now we need to smash all interrupts */
 	baboon->mb_ifr &= ~events;
 #endif
-	return IRQ_HANDLED;
 }
 
 /*
@@ -92,8 +90,7 @@ static irqreturn_t baboon_irq(int irq, void *dev_id)
 void __init baboon_register_interrupts(void)
 {
 	baboon_disabled = 0;
-	if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
-		pr_err("Couldn't register baboon interrupt\n");
+	irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq);
 }
 
 /*
@@ -111,7 +108,7 @@ void baboon_irq_enable(int irq)
 
 	baboon_disabled &= ~(1 << irq_idx);
 	if (!baboon_disabled)
-		mac_enable_irq(IRQ_NUBUS_C);
+		mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_disable(int irq)
@@ -124,7 +121,7 @@ void baboon_irq_disable(int irq)
 
 	baboon_disabled |= 1 << irq_idx;
 	if (baboon_disabled)
-		mac_disable_irq(IRQ_NUBUS_C);
+		mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C));
 }
 
 void baboon_irq_clear(int irq)

arch/m68k/mac/iop.c

@@ -305,15 +305,13 @@ void __init iop_register_interrupts(void)
 {
 	if (iop_ism_present) {
 		if (oss_present) {
-			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
-					IRQ_FLG_LOCK, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0,
+					"ISM IOP", (void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
-			if (request_irq(IRQ_VIA2_0, iop_ism_irq,
-					IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
-					(void *) IOP_NUM_ISM))
+			if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP",
+					(void *)IOP_NUM_ISM))
 				pr_err("Couldn't register ISM IOP interrupt\n");
 		}
 		if (!iop_alive(iop_base[IOP_NUM_ISM])) {

arch/m68k/mac/macints.c

@@ -190,14 +190,10 @@ irqreturn_t mac_debug_handler(int, void *);
 
 /* #define DEBUG_MACINTS */
 
-void mac_enable_irq(unsigned int irq);
-void mac_disable_irq(unsigned int irq);
-
-static struct irq_controller mac_irq_controller = {
+static struct irq_chip mac_irq_chip = {
 	.name		= "mac",
-	.lock		= __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
-	.enable		= mac_enable_irq,
-	.disable	= mac_disable_irq,
+	.irq_enable	= mac_irq_enable,
+	.irq_disable	= mac_irq_disable,
 };
 
 void __init mac_init_IRQ(void)
@@ -205,7 +201,7 @@ void __init mac_init_IRQ(void)
 #ifdef DEBUG_MACINTS
 	printk("mac_init_IRQ(): Setting things up...\n");
 #endif
-	m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
+	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
 				  NUM_MAC_SOURCES - IRQ_USER);
 	/* Make sure the SONIC interrupt is cleared or things get ugly */
 #ifdef SHUTUP_SONIC
@@ -241,16 +237,17 @@ void __init mac_init_IRQ(void)
 }
 
 /*
- *  mac_enable_irq - enable an interrupt source
- * mac_disable_irq - disable an interrupt source
+ *  mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
  *   mac_clear_irq - clears a pending interrupt
- * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
+ * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending)
  *
  * These routines are just dispatchers to the VIA/OSS/PSC routines.
  */
 
-void mac_enable_irq(unsigned int irq)
+void mac_irq_enable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {
@@ -283,8 +280,9 @@ void mac_enable_irq(unsigned int irq)
 	}
 }
 
-void mac_disable_irq(unsigned int irq)
+void mac_irq_disable(struct irq_data *data)
 {
+	int irq = data->irq;
 	int irq_src = IRQ_SRC(irq);
 
 	switch(irq_src) {

arch/m68k/mac/oss.c

@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -29,10 +30,7 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-static irqreturn_t oss_irq(int, void *);
-static irqreturn_t oss_nubus_irq(int, void *);
-
-extern irqreturn_t via1_irq(int, void *);
+extern void via1_irq(unsigned int irq, struct irq_desc *desc);
 
 /*
  * Initialize the OSS
@@ -59,26 +57,6 @@ void __init oss_init(void)
 	oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1;
 }
 
-/*
- * Register the OSS and NuBus interrupt dispatchers.
- */
-
-void __init oss_register_interrupts(void)
-{
-	if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
-			"scsi", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "scsi");
-	if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
-			"nubus", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-	if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
-			"sound", (void *) oss))
-		pr_err("Couldn't register %s interrupt\n", "sound");
-	if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
-			"via1", (void *) via1))
-		pr_err("Couldn't register %s interrupt\n", "via1");
-}
-
 /*
  * Initialize OSS for Nubus access
  */
@@ -92,17 +70,17 @@ void __init oss_nubus_init(void)
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-static irqreturn_t oss_irq(int irq, void *dev_id)
+static void oss_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events;
 
 	events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI);
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_IRQS
 	if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) {
-		printk("oss_irq: irq %d events = 0x%04X\n", irq,
+		printk("oss_irq: irq %u events = 0x%04X\n", irq,
 			(int) oss->irq_pending);
 	}
 #endif
@@ -113,11 +91,10 @@ static irqreturn_t oss_irq(int irq, void *dev_id)
 		/* FIXME: call sound handler */
 	} else if (events & OSS_IP_SCSI) {
 		oss->irq_pending &= ~OSS_IP_SCSI;
-		m68k_handle_int(IRQ_MAC_SCSI);
+		generic_handle_irq(IRQ_MAC_SCSI);
 	} else {
 		/* FIXME: error check here? */
 	}
-	return IRQ_HANDLED;
 }
 
 /*
@@ -126,13 +103,13 @@ static irqreturn_t oss_irq(int irq, void *dev_id)
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int events, irq_bit, i;
 
 	events = oss->irq_pending & OSS_IP_NUBUS;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 #ifdef DEBUG_NUBUS_INT
 	if (console_loglevel > 7) {
@@ -148,10 +125,21 @@ static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
 		irq_bit >>= 1;
 		if (events & irq_bit) {
 			oss->irq_pending &= ~irq_bit;
-			m68k_handle_int(NUBUS_SOURCE_BASE + i);
+			generic_handle_irq(NUBUS_SOURCE_BASE + i);
 		}
 	} while(events & (irq_bit - 1));
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the OSS and NuBus interrupt dispatchers.
+ */
+
+void __init oss_register_interrupts(void)
+{
+	irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq);
+	irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq);
+	irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq);
 }
 
 /*

arch/m68k/mac/psc.c

@@ -18,6 +18,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -30,8 +31,6 @@
 int psc_present;
 volatile __u8 *psc;
 
-irqreturn_t psc_irq(int, void *);
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -111,53 +110,53 @@ void __init psc_init(void)
 	}
 }
 
-/*
- * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
- */
-
-void __init psc_register_interrupts(void)
-{
-	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
-		pr_err("Couldn't register psc%d interrupt\n", 3);
-	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
-		pr_err("Couldn't register psc%d interrupt\n", 4);
-	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
-		pr_err("Couldn't register psc%d interrupt\n", 5);
-	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
-		pr_err("Couldn't register psc%d interrupt\n", 6);
-}
-
 /*
  * PSC interrupt handler. It's a lot like the VIA interrupt handler.
  */
 
-irqreturn_t psc_irq(int irq, void *dev_id)
+static void psc_irq(unsigned int irq, struct irq_desc *desc)
 {
-	int pIFR	= pIFRbase + ((int) dev_id);
-	int pIER	= pIERbase + ((int) dev_id);
+	unsigned int offset = (unsigned int)irq_desc_get_handler_data(desc);
+	int pIFR	= pIFRbase + offset;
+	int pIER	= pIERbase + offset;
 	int irq_num;
 	unsigned char irq_bit, events;
 
 #ifdef DEBUG_IRQS
-	printk("psc_irq: irq %d pIFR = 0x%02X pIER = 0x%02X\n",
+	printk("psc_irq: irq %u pIFR = 0x%02X pIER = 0x%02X\n",
 		irq, (int) psc_read_byte(pIFR), (int) psc_read_byte(pIER));
 #endif
 
 	events = psc_read_byte(pIFR) & psc_read_byte(pIER) & 0xF;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = irq << 3;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			psc_write_byte(pIFR, irq_bit);
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		irq_num++;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the PSC interrupt dispatchers for autovector interrupts 3-6.
+ */
+
+void __init psc_register_interrupts(void)
+{
+	irq_set_chained_handler(IRQ_AUTO_3, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_3, (void *)0x30);
+	irq_set_chained_handler(IRQ_AUTO_4, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_4, (void *)0x40);
+	irq_set_chained_handler(IRQ_AUTO_5, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_5, (void *)0x50);
+	irq_set_chained_handler(IRQ_AUTO_6, psc_irq);
+	irq_set_handler_data(IRQ_AUTO_6, (void *)0x60);
 }
 
 void psc_irq_enable(int irq) {

arch/m68k/mac/via.c

@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/macintosh.h>
@@ -77,9 +78,6 @@ static int gIER,gIFR,gBufA,gBufB;
 static u8 nubus_disabled;
 
 void via_debug_dump(void);
-irqreturn_t via1_irq(int, void *);
-irqreturn_t via2_irq(int, void *);
-irqreturn_t via_nubus_irq(int, void *);
 void via_irq_enable(int irq);
 void via_irq_disable(int irq);
 void via_irq_clear(int irq);
@@ -281,39 +279,10 @@ void __init via_init_clock(irq_handler_t func)
 	via1[vT1CL] = MAC_CLOCK_LOW;
 	via1[vT1CH] = MAC_CLOCK_HIGH;
 
-	if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+	if (request_irq(IRQ_MAC_TIMER_1, func, 0, "timer", func))
 		pr_err("Couldn't register %s interrupt\n", "timer");
 }
 
-/*
- * Register the interrupt dispatchers for VIA or RBV machines only.
- */
-
-void __init via_register_interrupts(void)
-{
-	if (via_alt_mapping) {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "software");
-		if (request_irq(IRQ_AUTO_6, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	} else {
-		if (request_irq(IRQ_AUTO_1, via1_irq,
-				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1))
-			pr_err("Couldn't register %s interrupt\n", "via1");
-	}
-	if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-			"via2", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "via2");
-	if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
-			IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
-		pr_err("Couldn't register %s interrupt\n", "nubus");
-}
-
 /*
  * Debugging dump, used in various places to see what's going on.
  */
@@ -446,48 +415,46 @@ void __init via_nubus_init(void)
  * via6522.c :-), disable/pending masks added.
  */
 
-irqreturn_t via1_irq(int irq, void *dev_id)
+void via1_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via1[vIFR] & via1[vIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA1_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via1[vIFR] = irq_bit;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
-irqreturn_t via2_irq(int irq, void *dev_id)
+static void via2_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int irq_num;
 	unsigned char irq_bit, events;
 
 	events = via2[gIFR] & via2[gIER] & 0x7F;
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	irq_num = VIA2_SOURCE_BASE;
 	irq_bit = 1;
 	do {
 		if (events & irq_bit) {
 			via2[gIFR] = irq_bit | rbv_clear;
-			m68k_handle_int(irq_num);
+			generic_handle_irq(irq_num);
 		}
 		++irq_num;
 		irq_bit <<= 1;
 	} while (events >= irq_bit);
-	return IRQ_HANDLED;
 }
 
 /*
@@ -495,7 +462,7 @@ irqreturn_t via2_irq(int irq, void *dev_id)
  * VIA2 dispatcher as a fast interrupt handler.
  */
 
-irqreturn_t via_nubus_irq(int irq, void *dev_id)
+void via_nubus_irq(unsigned int irq, struct irq_desc *desc)
 {
 	int slot_irq;
 	unsigned char slot_bit, events;
@@ -506,7 +473,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id)
 	else
 		events &= ~via2[vDirA];
 	if (!events)
-		return IRQ_NONE;
+		return;
 
 	do {
 		slot_irq = IRQ_NUBUS_F;
@@ -514,7 +481,7 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id)
 		do {
 			if (events & slot_bit) {
 				events &= ~slot_bit;
-				m68k_handle_int(slot_irq);
+				generic_handle_irq(slot_irq);
 			}
 			--slot_irq;
 			slot_bit >>= 1;
@@ -528,7 +495,24 @@ irqreturn_t via_nubus_irq(int irq, void *dev_id)
 		else
 			events &= ~via2[vDirA];
 	} while (events);
-	return IRQ_HANDLED;
+}
+
+/*
+ * Register the interrupt dispatchers for VIA or RBV machines only.
+ */
+
+void __init via_register_interrupts(void)
+{
+	if (via_alt_mapping) {
+		/* software interrupt */
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+		/* via1 interrupt */
+		irq_set_chained_handler(IRQ_AUTO_6, via1_irq);
+	} else {
+		irq_set_chained_handler(IRQ_AUTO_1, via1_irq);
+	}
+	irq_set_chained_handler(IRQ_AUTO_2, via2_irq);
+	irq_set_chained_handler(IRQ_MAC_NUBUS, via_nubus_irq);
 }
 
 void via_irq_enable(int irq) {

arch/m68k/mvme147/config.c

@@ -81,7 +81,7 @@ static void mvme147_get_model(char *model)
 
 void __init mvme147_init_IRQ(void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 void __init config_mvme147(void)
@@ -114,8 +114,7 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
 void mvme147_sched_init (irq_handler_t timer_routine)
 {
 	tick_handler = timer_routine;
-	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
-			"timer 1", NULL))
+	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, 0, "timer 1", NULL))
 		pr_err("Couldn't register timer interrupt\n");
 
 	/* Init the clock with a value */

arch/m68k/mvme16x/config.c

@@ -117,7 +117,7 @@ static void mvme16x_get_hardware_list(struct seq_file *m)
 
 static void __init mvme16x_init_IRQ (void)
 {
-	m68k_setup_user_interrupt(VEC_USER, 192, NULL);
+	m68k_setup_user_interrupt(VEC_USER, 192);
 }
 
 #define pcc2chip	((volatile u_char *)0xfff42000)

arch/m68k/q40/q40ints.c

@@ -15,10 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/ptrace.h>
 #include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/traps.h>
 
 #include <asm/q40_master.h>
@@ -35,35 +35,36 @@
 */
 
 static void q40_irq_handler(unsigned int, struct pt_regs *fp);
-static void q40_enable_irq(unsigned int);
-static void q40_disable_irq(unsigned int);
+static void q40_irq_enable(struct irq_data *data);
+static void q40_irq_disable(struct irq_data *data);
 
 unsigned short q40_ablecount[35];
 unsigned short q40_state[35];
 
-static int q40_irq_startup(unsigned int irq)
+static unsigned int q40_irq_startup(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* test for ISA ints not implemented by HW */
 	switch (irq) {
 	case 1: case 2: case 8: case 9:
 	case 11: case 12: case 13:
 		printk("%s: ISA IRQ %d not implemented by HW\n", __func__, irq);
-		return -ENXIO;
+		/* FIXME return -ENXIO; */
 	}
 	return 0;
 }
 
-static void q40_irq_shutdown(unsigned int irq)
+static void q40_irq_shutdown(struct irq_data *data)
 {
 }
 
-static struct irq_controller q40_irq_controller = {
+static struct irq_chip q40_irq_chip = {
 	.name		= "q40",
-	.lock		= __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock),
-	.startup	= q40_irq_startup,
-	.shutdown	= q40_irq_shutdown,
-	.enable		= q40_enable_irq,
-	.disable	= q40_disable_irq,
+	.irq_startup	= q40_irq_startup,
+	.irq_shutdown	= q40_irq_shutdown,
+	.irq_enable	= q40_irq_enable,
+	.irq_disable	= q40_irq_disable,
 };
 
 /*
@@ -81,13 +82,14 @@ static int disabled;
 
 void __init q40_init_IRQ(void)
 {
-	m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX);
+	m68k_setup_irq_controller(&q40_irq_chip, handle_simple_irq, 1,
+				  Q40_IRQ_MAX);
 
 	/* setup handler for ISA ints */
 	m68k_setup_auto_interrupt(q40_irq_handler);
 
-	m68k_irq_startup(IRQ_AUTO_2);
-	m68k_irq_startup(IRQ_AUTO_4);
+	m68k_irq_startup_irq(IRQ_AUTO_2);
+	m68k_irq_startup_irq(IRQ_AUTO_4);
 
 	/* now enable some ints.. */
 	master_outb(1, EXT_ENABLE_REG);  /* ISA IRQ 5-15 */
@@ -218,11 +220,11 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp)
 	switch (irq) {
 	case 4:
 	case 6:
-		__m68k_handle_int(Q40_IRQ_SAMPLE, fp);
+		do_IRQ(Q40_IRQ_SAMPLE, fp);
 		return;
 	}
 	if (mir & Q40_IRQ_FRAME_MASK) {
-		__m68k_handle_int(Q40_IRQ_FRAME, fp);
+		do_IRQ(Q40_IRQ_FRAME, fp);
 		master_outb(-1, FRAME_CLEAR_REG);
 	}
 	if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) {
@@ -257,7 +259,7 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp)
 					goto iirq;
 				}
 				q40_state[irq] |= IRQ_INPROGRESS;
-				__m68k_handle_int(irq, fp);
+				do_IRQ(irq, fp);
 				q40_state[irq] &= ~IRQ_INPROGRESS;
 
 				/* naively enable everything, if that fails than    */
@@ -288,25 +290,29 @@ static void q40_irq_handler(unsigned int irq, struct pt_regs *fp)
 	mir = master_inb(IIRQ_REG);
 	/* should test whether keyboard irq is really enabled, doing it in defhand */
 	if (mir & Q40_IRQ_KEYB_MASK)
-		__m68k_handle_int(Q40_IRQ_KEYBOARD, fp);
+		do_IRQ(Q40_IRQ_KEYBOARD, fp);
 
 	return;
 }
 
-void q40_enable_irq(unsigned int irq)
+void q40_irq_enable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	if (irq >= 5 && irq <= 15) {
 		mext_disabled--;
 		if (mext_disabled > 0)
-			printk("q40_enable_irq : nested disable/enable\n");
+			printk("q40_irq_enable : nested disable/enable\n");
 		if (mext_disabled == 0)
 			master_outb(1, EXT_ENABLE_REG);
 	}
 }
 
 
-void q40_disable_irq(unsigned int irq)
+void q40_irq_disable(struct irq_data *data)
 {
+	unsigned int irq = data->irq;
+
 	/* disable ISA iqs : only do something if the driver has been
 	 * verified to be Q40 "compatible" - right now IDE, NE2K
 	 * Any driver should not attempt to sleep across disable_irq !!
@@ -319,13 +325,3 @@ void q40_disable_irq(unsigned int irq)
 			printk("disable_irq nesting count %d\n",mext_disabled);
 	}
 }
-
-unsigned long q40_probe_irq_on(void)
-{
-	printk("irq probing not working - reconfigure the driver to avoid this\n");
-	return -1;
-}
-int q40_probe_irq_off(unsigned long irqs)
-{
-	return -1;
-}

arch/m68k/sun3/sun3ints.c

@@ -51,25 +51,29 @@ void sun3_disable_irq(unsigned int irq)
 
 static irqreturn_t sun3_int7(int irq, void *dev_id)
 {
-	*sun3_intreg |=  (1 << irq);
-	if (!(kstat_cpu(0).irqs[irq] % 2000))
-		sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 16000) / 2000]);
+	unsigned int cnt;
+
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 2000))
+		sun3_leds(led_pattern[cnt % 16000 / 2000]);
 	return IRQ_HANDLED;
 }
 
 static irqreturn_t sun3_int5(int irq, void *dev_id)
 {
+	unsigned int cnt;
+
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
-        *sun3_intreg |=  (1 << irq);
 #ifdef CONFIG_SUN3
 	intersil_clear();
 #endif
 	xtime_update(1);
 	update_process_times(user_mode(get_irq_regs()));
-        if (!(kstat_cpu(0).irqs[irq] % 20))
-                sun3_leds(led_pattern[(kstat_cpu(0).irqs[irq] % 160) / 20]);
+	cnt = kstat_irqs_cpu(irq, 0);
+	if (!(cnt % 20))
+		sun3_leds(led_pattern[cnt % 160 / 20]);
 	return IRQ_HANDLED;
 }
 
@@ -79,29 +83,33 @@ static irqreturn_t sun3_vec255(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void sun3_inthandle(unsigned int irq, struct pt_regs *fp)
+static void sun3_irq_enable(struct irq_data *data)
 {
-        *sun3_intreg &= ~(1 << irq);
+    sun3_enable_irq(data->irq);
+};
 
-	__m68k_handle_int(irq, fp);
-}
+static void sun3_irq_disable(struct irq_data *data)
+{
+    sun3_disable_irq(data->irq);
+};
 
-static struct irq_controller sun3_irq_controller = {
+static struct irq_chip sun3_irq_chip = {
 	.name		= "sun3",
-	.lock		= __SPIN_LOCK_UNLOCKED(sun3_irq_controller.lock),
-	.startup	= m68k_irq_startup,
-	.shutdown	= m68k_irq_shutdown,
-	.enable		= sun3_enable_irq,
-	.disable	= sun3_disable_irq,
+	.irq_startup	= m68k_irq_startup,
+	.irq_shutdown	= m68k_irq_shutdown,
+	.irq_enable	= sun3_irq_enable,
+	.irq_disable	= sun3_irq_disable,
+	.irq_mask	= sun3_irq_disable,
+	.irq_unmask	= sun3_irq_enable,
 };
 
 void __init sun3_init_IRQ(void)
 {
 	*sun3_intreg = 1;
 
-	m68k_setup_auto_interrupt(sun3_inthandle);
-	m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
-	m68k_setup_user_interrupt(VEC_USER, 128, NULL);
+	m68k_setup_irq_controller(&sun3_irq_chip, handle_level_irq, IRQ_AUTO_1,
+				  7);
+	m68k_setup_user_interrupt(VEC_USER, 128);
 
 	if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
 		pr_err("Couldn't register %s interrupt\n", "int5");

drivers/ide/ide-cd.c

@@ -43,7 +43,6 @@
 /* For SCSI -> ATAPI command conversion */
 #include <scsi/scsi.h>
 
-#include <linux/irq.h>
 #include <linux/io.h>
 #include <asm/byteorder.h>
 #include <linux/uaccess.h>

drivers/ide/ide-floppy.c

@@ -35,7 +35,6 @@
 #include <scsi/scsi_ioctl.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>

drivers/ide/ide-tape.c

@@ -41,7 +41,6 @@
 #include <scsi/scsi.h>
 
 #include <asm/byteorder.h>
-#include <linux/irq.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
 #include <asm/unaligned.h>

drivers/macintosh/via-macii.c

@@ -159,7 +159,7 @@ int macii_init(void)
 	err = macii_init_via();
 	if (err) goto out;
 
-	err = request_irq(IRQ_MAC_ADB, macii_interrupt, IRQ_FLG_LOCK, "ADB",
+	err = request_irq(IRQ_MAC_ADB, macii_interrupt, 0, "ADB",
 			  macii_interrupt);
 	if (err) goto out;
 

drivers/macintosh/via-maciisi.c

@@ -122,8 +122,8 @@ maciisi_init(void)
 		return err;
 	}
 
-	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, IRQ_FLG_LOCK | IRQ_FLG_FAST, 
-			"ADB", maciisi_interrupt)) {
+	if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB",
+			maciisi_interrupt)) {
 		printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB);
 		return -EAGAIN;
 	}