Commit 8f0545d2 authored by Jakub Kicinski's avatar Jakub Kicinski Committed by David S. Miller

be2net: convert to new udp_tunnel_nic infra

Convert be2net to new udp_tunnel_nic infra. NIC only takes one VxLAN
port. Remove the port tracking using a list. The warning in
be_work_del_vxlan_port() looked suspicious - like the driver expected
ports to be removed in order of addition.

be2net unregisters ports when going down and re-registers them (for
skyhawk) when coming up, but it never checks if the device is up
in the add_port / del_port callbacks. Make it use
UDP_TUNNEL_NIC_INFO_OPEN_ONLY. Sadly this driver calls its own
open/close functions directly so the udp_tunnel_nic_reset_ntf()
workaround is needed.
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 641ca085
......@@ -654,8 +654,6 @@ struct be_adapter {
u8 hba_port_num;
u16 pvid;
__be16 vxlan_port; /* offloaded vxlan port num */
int vxlan_port_count; /* active vxlan port count */
struct list_head vxlan_port_list; /* vxlan port list */
struct phy_info phy;
u8 wol_cap;
bool wol_en;
......@@ -679,9 +677,6 @@ struct be_adapter {
struct be_cmd_work {
struct work_struct work;
struct be_adapter *adapter;
union {
__be16 vxlan_port;
} info;
};
#define be_physfn(adapter) (!adapter->virtfn)
......
......@@ -3829,8 +3829,8 @@ static int be_open(struct net_device *netdev)
be_link_status_update(adapter, link_status);
netif_tx_start_all_queues(netdev);
if (skyhawk_chip(adapter))
udp_tunnel_get_rx_info(netdev);
udp_tunnel_nic_reset_ntf(netdev);
return 0;
err:
......@@ -3967,18 +3967,23 @@ static void be_cancel_err_detection(struct be_adapter *adapter)
}
}
static int be_enable_vxlan_offloads(struct be_adapter *adapter)
/* VxLAN offload Notes:
*
* The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
* distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
* is expected to work across all types of IP tunnels once exported. Skyhawk
* supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
* offloads in hw_enc_features only when a VxLAN port is added. If other (non
* VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
* those other tunnels are unexported on the fly through ndo_features_check().
*/
static int be_vxlan_set_port(struct net_device *netdev, unsigned int table,
unsigned int entry, struct udp_tunnel_info *ti)
{
struct net_device *netdev = adapter->netdev;
struct be_adapter *adapter = netdev_priv(netdev);
struct device *dev = &adapter->pdev->dev;
struct be_vxlan_port *vxlan_port;
__be16 port;
int status;
vxlan_port = list_first_entry(&adapter->vxlan_port_list,
struct be_vxlan_port, list);
port = vxlan_port->port;
status = be_cmd_manage_iface(adapter, adapter->if_handle,
OP_CONVERT_NORMAL_TO_TUNNEL);
if (status) {
......@@ -3987,25 +3992,26 @@ static int be_enable_vxlan_offloads(struct be_adapter *adapter)
}
adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS;
status = be_cmd_set_vxlan_port(adapter, port);
status = be_cmd_set_vxlan_port(adapter, ti->port);
if (status) {
dev_warn(dev, "Failed to add VxLAN port\n");
return status;
}
adapter->vxlan_port = port;
adapter->vxlan_port = ti->port;
netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
NETIF_F_TSO | NETIF_F_TSO6 |
NETIF_F_GSO_UDP_TUNNEL;
dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n",
be16_to_cpu(port));
be16_to_cpu(ti->port));
return 0;
}
static void be_disable_vxlan_offloads(struct be_adapter *adapter)
static int be_vxlan_unset_port(struct net_device *netdev, unsigned int table,
unsigned int entry, struct udp_tunnel_info *ti)
{
struct net_device *netdev = adapter->netdev;
struct be_adapter *adapter = netdev_priv(netdev);
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)
be_cmd_manage_iface(adapter, adapter->if_handle,
......@@ -4018,8 +4024,19 @@ static void be_disable_vxlan_offloads(struct be_adapter *adapter)
adapter->vxlan_port = 0;
netdev->hw_enc_features = 0;
return 0;
}
static const struct udp_tunnel_nic_info be_udp_tunnels = {
.set_port = be_vxlan_set_port,
.unset_port = be_vxlan_unset_port,
.flags = UDP_TUNNEL_NIC_INFO_MAY_SLEEP |
UDP_TUNNEL_NIC_INFO_OPEN_ONLY,
.tables = {
{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
},
};
static void be_calculate_vf_res(struct be_adapter *adapter, u16 num_vfs,
struct be_resources *vft_res)
{
......@@ -4135,7 +4152,7 @@ static int be_clear(struct be_adapter *adapter)
&vft_res);
}
be_disable_vxlan_offloads(adapter);
be_vxlan_unset_port(adapter->netdev, 0, 0, NULL);
be_if_destroy(adapter);
......@@ -5053,147 +5070,6 @@ static struct be_cmd_work *be_alloc_work(struct be_adapter *adapter,
return work;
}
/* VxLAN offload Notes:
*
* The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
* distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
* is expected to work across all types of IP tunnels once exported. Skyhawk
* supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
* offloads in hw_enc_features only when a VxLAN port is added. If other (non
* VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
* those other tunnels are unexported on the fly through ndo_features_check().
*
* Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack
* adds more than one port, disable offloads and re-enable them again when
* there's only one port left. We maintain a list of ports for this purpose.
*/
static void be_work_add_vxlan_port(struct work_struct *work)
{
struct be_cmd_work *cmd_work =
container_of(work, struct be_cmd_work, work);
struct be_adapter *adapter = cmd_work->adapter;
struct device *dev = &adapter->pdev->dev;
__be16 port = cmd_work->info.vxlan_port;
struct be_vxlan_port *vxlan_port;
int status;
/* Bump up the alias count if it is an existing port */
list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) {
if (vxlan_port->port == port) {
vxlan_port->port_aliases++;
goto done;
}
}
/* Add a new port to our list. We don't need a lock here since port
* add/delete are done only in the context of a single-threaded work
* queue (be_wq).
*/
vxlan_port = kzalloc(sizeof(*vxlan_port), GFP_KERNEL);
if (!vxlan_port)
goto done;
vxlan_port->port = port;
INIT_LIST_HEAD(&vxlan_port->list);
list_add_tail(&vxlan_port->list, &adapter->vxlan_port_list);
adapter->vxlan_port_count++;
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) {
dev_info(dev,
"Only one UDP port supported for VxLAN offloads\n");
dev_info(dev, "Disabling VxLAN offloads\n");
goto err;
}
if (adapter->vxlan_port_count > 1)
goto done;
status = be_enable_vxlan_offloads(adapter);
if (!status)
goto done;
err:
be_disable_vxlan_offloads(adapter);
done:
kfree(cmd_work);
return;
}
static void be_work_del_vxlan_port(struct work_struct *work)
{
struct be_cmd_work *cmd_work =
container_of(work, struct be_cmd_work, work);
struct be_adapter *adapter = cmd_work->adapter;
__be16 port = cmd_work->info.vxlan_port;
struct be_vxlan_port *vxlan_port;
/* Nothing to be done if a port alias is being deleted */
list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) {
if (vxlan_port->port == port) {
if (vxlan_port->port_aliases) {
vxlan_port->port_aliases--;
goto done;
}
break;
}
}
/* No port aliases left; delete the port from the list */
list_del(&vxlan_port->list);
adapter->vxlan_port_count--;
/* Disable VxLAN offload if this is the offloaded port */
if (adapter->vxlan_port == vxlan_port->port) {
WARN_ON(adapter->vxlan_port_count);
be_disable_vxlan_offloads(adapter);
dev_info(&adapter->pdev->dev,
"Disabled VxLAN offloads for UDP port %d\n",
be16_to_cpu(port));
goto out;
}
/* If only 1 port is left, re-enable VxLAN offload */
if (adapter->vxlan_port_count == 1)
be_enable_vxlan_offloads(adapter);
out:
kfree(vxlan_port);
done:
kfree(cmd_work);
}
static void be_cfg_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti,
void (*func)(struct work_struct *))
{
struct be_adapter *adapter = netdev_priv(netdev);
struct be_cmd_work *cmd_work;
if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
return;
if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter))
return;
cmd_work = be_alloc_work(adapter, func);
if (cmd_work) {
cmd_work->info.vxlan_port = ti->port;
queue_work(be_wq, &cmd_work->work);
}
}
static void be_del_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
be_cfg_vxlan_port(netdev, ti, be_work_del_vxlan_port);
}
static void be_add_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
be_cfg_vxlan_port(netdev, ti, be_work_add_vxlan_port);
}
static netdev_features_t be_features_check(struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features)
......@@ -5309,8 +5185,8 @@ static const struct net_device_ops be_netdev_ops = {
#endif
.ndo_bridge_setlink = be_ndo_bridge_setlink,
.ndo_bridge_getlink = be_ndo_bridge_getlink,
.ndo_udp_tunnel_add = be_add_vxlan_port,
.ndo_udp_tunnel_del = be_del_vxlan_port,
.ndo_udp_tunnel_add = udp_tunnel_nic_add_port,
.ndo_udp_tunnel_del = udp_tunnel_nic_del_port,
.ndo_features_check = be_features_check,
.ndo_get_phys_port_id = be_get_phys_port_id,
};
......@@ -5342,6 +5218,9 @@ static void be_netdev_init(struct net_device *netdev)
netdev->ethtool_ops = &be_ethtool_ops;
if (!lancer_chip(adapter) && !BEx_chip(adapter) && !be_is_mc(adapter))
netdev->udp_tunnel_nic_info = &be_udp_tunnels;
/* MTU range: 256 - 9000 */
netdev->min_mtu = BE_MIN_MTU;
netdev->max_mtu = BE_MAX_MTU;
......@@ -5819,7 +5698,6 @@ static int be_drv_init(struct be_adapter *adapter)
/* Must be a power of 2 or else MODULO will BUG_ON */
adapter->be_get_temp_freq = 64;
INIT_LIST_HEAD(&adapter->vxlan_port_list);
return 0;
free_rx_filter:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment