pinctrl: ocelot: Add support for Luton platforms

This patch adds support for Luton pinctrl, using the ocelot driver as
basis. It adds pinconfig support as well, as supported by the
platform.

gclement: Split from a larger patch adding support all platforms in
the same time.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20201106093118.965152-4-gregory.clement@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/pinctrl-ocelot.c

@@ -158,6 +158,88 @@ struct ocelot_pinctrl {
 	u8 stride;
 };
 
+#define LUTON_P(p, f0, f1)						\
+static struct ocelot_pin_caps luton_pin_##p = {				\
+	.pin = p,							\
+	.functions = {							\
+			FUNC_GPIO, FUNC_##f0, FUNC_##f1, FUNC_NONE,	\
+	},								\
+}
+
+LUTON_P(0,  SG0,       NONE);
+LUTON_P(1,  SG0,       NONE);
+LUTON_P(2,  SG0,       NONE);
+LUTON_P(3,  SG0,       NONE);
+LUTON_P(4,  TACHO,     NONE);
+LUTON_P(5,  TWI,       PHY_LED);
+LUTON_P(6,  TWI,       PHY_LED);
+LUTON_P(7,  NONE,      PHY_LED);
+LUTON_P(8,  EXT_IRQ,   PHY_LED);
+LUTON_P(9,  EXT_IRQ,   PHY_LED);
+LUTON_P(10, SFP,       PHY_LED);
+LUTON_P(11, SFP,       PHY_LED);
+LUTON_P(12, SFP,       PHY_LED);
+LUTON_P(13, SFP,       PHY_LED);
+LUTON_P(14, SI,        PHY_LED);
+LUTON_P(15, SI,        PHY_LED);
+LUTON_P(16, SI,        PHY_LED);
+LUTON_P(17, SFP,       PHY_LED);
+LUTON_P(18, SFP,       PHY_LED);
+LUTON_P(19, SFP,       PHY_LED);
+LUTON_P(20, SFP,       PHY_LED);
+LUTON_P(21, SFP,       PHY_LED);
+LUTON_P(22, SFP,       PHY_LED);
+LUTON_P(23, SFP,       PHY_LED);
+LUTON_P(24, SFP,       PHY_LED);
+LUTON_P(25, SFP,       PHY_LED);
+LUTON_P(26, SFP,       PHY_LED);
+LUTON_P(27, SFP,       PHY_LED);
+LUTON_P(28, SFP,       PHY_LED);
+LUTON_P(29, PWM,       NONE);
+LUTON_P(30, UART,      NONE);
+LUTON_P(31, UART,      NONE);
+
+#define LUTON_PIN(n) {						\
+	.number = n,						\
+	.name = "GPIO_"#n,					\
+	.drv_data = &luton_pin_##n				\
+}
+
+static const struct pinctrl_pin_desc luton_pins[] = {
+	LUTON_PIN(0),
+	LUTON_PIN(1),
+	LUTON_PIN(2),
+	LUTON_PIN(3),
+	LUTON_PIN(4),
+	LUTON_PIN(5),
+	LUTON_PIN(6),
+	LUTON_PIN(7),
+	LUTON_PIN(8),
+	LUTON_PIN(9),
+	LUTON_PIN(10),
+	LUTON_PIN(11),
+	LUTON_PIN(12),
+	LUTON_PIN(13),
+	LUTON_PIN(14),
+	LUTON_PIN(15),
+	LUTON_PIN(16),
+	LUTON_PIN(17),
+	LUTON_PIN(18),
+	LUTON_PIN(19),
+	LUTON_PIN(20),
+	LUTON_PIN(21),
+	LUTON_PIN(22),
+	LUTON_PIN(23),
+	LUTON_PIN(24),
+	LUTON_PIN(25),
+	LUTON_PIN(26),
+	LUTON_PIN(27),
+	LUTON_PIN(28),
+	LUTON_PIN(29),
+	LUTON_PIN(30),
+	LUTON_PIN(31),
+};
+
 #define OCELOT_P(p, f0, f1, f2)						\
 static struct ocelot_pin_caps ocelot_pin_##p = {			\
 	.pin = p,							\
@@ -868,6 +950,15 @@ static const struct pinctrl_ops ocelot_pctl_ops = {
 	.dt_free_map = pinconf_generic_dt_free_map,
 };
 
+static struct pinctrl_desc luton_desc = {
+	.name = "luton-pinctrl",
+	.pins = luton_pins,
+	.npins = ARRAY_SIZE(luton_pins),
+	.pctlops = &ocelot_pctl_ops,
+	.pmxops = &ocelot_pmx_ops,
+	.owner = THIS_MODULE,
+};
+
 static struct pinctrl_desc ocelot_desc = {
 	.name = "ocelot-pinctrl",
 	.pins = ocelot_pins,
@@ -1151,6 +1242,7 @@ static int ocelot_gpiochip_register(struct platform_device *pdev,
 }
 
 static const struct of_device_id ocelot_pinctrl_of_match[] = {
+	{ .compatible = "mscc,luton-pinctrl", .data = &luton_desc },
 	{ .compatible = "mscc,ocelot-pinctrl", .data = &ocelot_desc },
 	{ .compatible = "mscc,jaguar2-pinctrl", .data = &jaguar2_desc },
 	{ .compatible = "microchip,sparx5-pinctrl", .data = &sparx5_desc },