Merge tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix module autoloading on gpio-74x164 after a revert of OF modaliases

 - fix problems with the bias setting in gpio-pca953x

 - fix a use-after-free bug in gpio-mockup by using software nodes

* tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mockup: Convert to use software nodes
  gpio: pca953x: Improve bias setting
  gpio: 74x164: Add SPI device ID table

drivers/gpio/gpio-74x164.c

@@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct spi_device_id gen_74x164_spi_ids[] = {
+	{ .name = "74hc595" },
+	{ .name = "74lvc594" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, gen_74x164_spi_ids);
+
 static const struct of_device_id gen_74x164_dt_ids[] = {
 	{ .compatible = "fairchild,74hc595" },
 	{ .compatible = "nxp,74lvc594" },
@@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = {
 	},
 	.probe		= gen_74x164_probe,
 	.remove		= gen_74x164_remove,
+	.id_table	= gen_74x164_spi_ids,
 };
 module_spi_driver(gen_74x164_driver);
 

drivers/gpio/gpio-mockup.c

@@ -476,10 +476,19 @@ static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC];
 
 static void gpio_mockup_unregister_pdevs(void)
 {
+	struct platform_device *pdev;
+	struct fwnode_handle *fwnode;
 	int i;
 
-	for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++)
-		platform_device_unregister(gpio_mockup_pdevs[i]);
+	for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) {
+		pdev = gpio_mockup_pdevs[i];
+		if (!pdev)
+			continue;
+
+		fwnode = dev_fwnode(&pdev->dev);
+		platform_device_unregister(pdev);
+		fwnode_remove_software_node(fwnode);
+	}
 }
 
 static __init char **gpio_mockup_make_line_names(const char *label,
@@ -508,6 +517,7 @@ static int __init gpio_mockup_register_chip(int idx)
 	struct property_entry properties[GPIO_MOCKUP_MAX_PROP];
 	struct platform_device_info pdevinfo;
 	struct platform_device *pdev;
+	struct fwnode_handle *fwnode;
 	char **line_names = NULL;
 	char chip_label[32];
 	int prop = 0, base;
@@ -536,13 +546,18 @@ static int __init gpio_mockup_register_chip(int idx)
 					"gpio-line-names", line_names, ngpio);
 	}
 
+	fwnode = fwnode_create_software_node(properties, NULL);
+	if (IS_ERR(fwnode))
+		return PTR_ERR(fwnode);
+
 	pdevinfo.name = "gpio-mockup";
 	pdevinfo.id = idx;
-	pdevinfo.properties = properties;
+	pdevinfo.fwnode = fwnode;
 
 	pdev = platform_device_register_full(&pdevinfo);
 	kfree_strarray(line_names, ngpio);
 	if (IS_ERR(pdev)) {
+		fwnode_remove_software_node(fwnode);
 		pr_err("error registering device");
 		return PTR_ERR(pdev);
 	}

drivers/gpio/gpio-pca953x.c

@@ -559,20 +559,20 @@ static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
 
 	mutex_lock(&chip->i2c_lock);
 
-	/* Disable pull-up/pull-down */
-	ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
-	if (ret)
-		goto exit;
-
 	/* Configure pull-up/pull-down */
 	if (config == PIN_CONFIG_BIAS_PULL_UP)
 		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
 	else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
 		ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
+	else
+		ret = 0;
 	if (ret)
 		goto exit;
 
-	/* Enable pull-up/pull-down */
+	/* Disable/Enable pull-up/pull-down */
+	if (config == PIN_CONFIG_BIAS_DISABLE)
+		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
+	else
 		ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
 
 exit:
@@ -587,7 +587,9 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 
 	switch (pinconf_to_config_param(config)) {
 	case PIN_CONFIG_BIAS_PULL_UP:
+	case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
 	case PIN_CONFIG_BIAS_PULL_DOWN:
+	case PIN_CONFIG_BIAS_DISABLE:
 		return pca953x_gpio_set_pull_up_down(chip, offset, config);
 	default:
 		return -ENOTSUPP;