Commit 903c0ef2 authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Shawn Guo

ARM: dts: imx6sx-sdb: Add SPDIF support

Add SPDIF support.
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent c3a71ffb
...@@ -179,6 +179,15 @@ panel_in: endpoint { ...@@ -179,6 +179,15 @@ panel_in: endpoint {
}; };
}; };
}; };
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx6sx-sdb-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
};
}; };
&audmux { &audmux {
...@@ -296,6 +305,14 @@ &sai1 { ...@@ -296,6 +305,14 @@ &sai1 {
status = "disabled"; status = "disabled";
}; };
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
assigned-clock-rates = <24576000>;
status = "okay";
};
&ssi2 { &ssi2 {
status = "okay"; status = "okay";
}; };
...@@ -562,6 +579,12 @@ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 ...@@ -562,6 +579,12 @@ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
>; >;
}; };
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0
>;
};
pinctrl_uart1: uart1grp { pinctrl_uart1: uart1grp {
fsl,pins = < fsl,pins = <
MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment